Do you need more storage space? Is your garage so overloaded that you have to park your car in the driveway? Are you looking for a smart storage solution that you can do yourself? The Family Handyman designed a simple and fast system using plywood and plastic bins to get all that stuff up and out of the way, taking advantage of unclaimed space in your garage. According to The Family Handyman, you can build and install this storage solution in an afternoon. Note: Be sure to measure the height above your garage door before you buy the plastic bins. 9 Steps to Create a Sliding Storage Solution: 1. Measure the top of the tote to determine the width of the tote rims and the size of the bottom flanges of the carriages. 2. Cut 3-in.-wide strips of 3/4-in. plywood for the bottom flange. Center them on 4-ft.-long 2x4s, then glue and screw them. Use 2-in. screws every 10 in. 3. Flip the carriage assemblies over. Center the 5-in.- wide plywood top flanges and glue and screw them to complete the carriage assemblies. 4. Locate the ceiling joists with a stud finder and snap chalk lines to mark them. Probe with a finish nail to make sure the lines fall on joist centers. 5. Mark each carriage 12 in. from the end and align the mark with the joist location. Screw the carriage temporarily to each joist on one side of the flange with 3-in. screws. 6. Cut a 2x4 template from your...