3 PDF files including a full-scale blueprint, all pattern pieces, and an instructional guide! You will be able to cut out each piece and assemble Fishbones with EVA foam. All information including which size foam is used for each piece and how they fit together is included within the guide. RECOMMENDED MATERIALS: EVA foam (I used 2mm, 4mm, and 1/2") Contact Cement Cardboard Shipping Tube Dremel Heat Gun I also have a youtube video tutorial showing the construction of the prop here: https://www.youtube.com/watch?v=IsIv25t_XIU&t=6s&ab_channel=TheInsanityProject PRINT INSTRUCTIONS: Open the pdf in any printing program (Adobe Acrobat Reader is free!) In the print menu, select poster (sometimes referred to as tile) and the pattern will print it across as many letter-size pages as needed to reach full size. Set scale to 100% and print out the pattern and tape the pages together! *If you have any questions about assembly or the pattern feel free to contact me! INSTAGRAM: https://www.instagram.com/theinsanityproject TIK TOK: https://www.tiktok.com/@theinsanityproject YOUTUBE: https://www.youtube.com/channel/UC2MlOz07LwF3pDWKWDs7E2Q