A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door maybe supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener is included, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the Easy stop AB twin dual soft closer/opener will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
Industrial style doors that may not be steel but are the next best thing and made from warm lightly grained wood or wood substitutes and with the warmth that only a wooden door can offer, for those discerning customers that not only want something different but also require something different. All doors slide open left and right, delivery will be from at least two separate suppliers. A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
POCKET DOOR SYSTEM: A router will be required for door(s) installation. System operation viewed from above: Our all new Ermetika interior double pocket door systems have free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door maybe supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener is included, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the Easy stop AB twin dual soft closer/opener will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match. DOORS: The doors are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section. Eco-Urban Slimline Industrial Door Range: our own UK-manufactured range of high-quality hand made interior doors to replace the Weekamp range we have now removed. All doors from DirectDoors Bespoke Slimline range are 40mm thick, rail & stile breadths are 90mm, astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm. Please note, the 90mm rails require no more than a 50mm flush handle to be fitted. All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion. The beauty of the grain may be visible on some of the real wood door material.
Twin Black Chelsea Telescopic Pocket Door System These exquisite pocket doors make a powerful fashion statement, concurrently offering sleek and streamlined functionality when space is at a premium, by allowing for a larger passageway when space is limited, Telescopic pocket doors provide an exceptional level of conven
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior two door pocket systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings and the door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our ""Dimensions PDF"" for all sizes but use as a guide only. The Ermetika pockets are available in one standard width for a finished wall thickness of 180mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 155mm (6"" approx) so that you can directly fit the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of 180mm (7""). Further layers of plasterboard can be added to increase the overall wall thickness but other joinery work may be required. When fully open the leading door projects 9cm out of the pocket. When the telescopic doors are fully closed with both doors out of the cassette, the overlap of the doors will be about 5 cm on average. Bespoke orders or parts thereof will not be cancelled regardless of quoted timescale as this may involve goods travelling from Europe, Indonesia etc and may be in transit or manufacturing may have commenced, charges will apply. Size limitation: Staffetta Synchroniser accessory cannot be installed on any door below 615 wide. All accessories for pocket doors including flush door pulls can be purchased separately. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as one pair and as such we cannot guarantee a perfect colour match.
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
POCKET DOOR SYSTEM: A router will be required for door(s) installation. System operation viewed from above: Our all new Ermetika interior double pocket door systems have free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door maybe supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener is included, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the Easy stop AB twin dual soft closer/opener will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match. DOORS: The doors are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section. Eco-Urban Slimline Industrial Door Range: our own UK-manufactured range of high-quality hand made interior doors to replace the Weekamp range we have now removed. All doors from DirectDoors Bespoke Slimline range are 40mm thick, rail & stile breadths are 90mm, astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm. Please note, the 90mm rails require no more than a 50mm flush handle to be fitted. All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion. The beauty of the grain may be visible on some of the real wood door material.
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
Industrial style doors that may not be steel but are the next best thing and made from warm lightly grained wood or wood substitutes and with the warmth that only a wooden door can offer, for those discerning customers that not only want something different but also require something different. All doors slide open left and right, delivery will be from at least two separate suppliers. A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Absolute Evokit, when you don’t want to see any architraves or jambs, just a modern, clean finish allied to a cutting edge system for a truly contemporary feel. Our all new Ermetika interior single pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the door straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, the door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika Absolute Evokit pockets are available in one standard width for a finished wall thickness of 100mm but it is envisaged that the 125mm will be available in the future. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") which is the standard studwork size generally in use, so that you can directly continue using the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of 100mm (4") four inches. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm if and when the 125mm cassette system is available. An Easy stop AB twin dual soft closer/opener accessory to close the door slowly and softly is included. Other items such as flush door pulls and bathroom locks can all be purchased separately, doors will require a routered channel to be created in the bottom of the door to accommodate the supplied track guide. The pocket door frame must be concealed within your own wall when installing.
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. System operation viewed from above: Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the AB Soft Closer will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match.
Twin Black Tribeca Telescopic Pocket Door System These exquisite pocket doors make a powerful fashion statement, concurrently offering sleek and streamlined functionality when space is at a premium, by allowing for a larger passageway when space is limited, Telescopic pocket doors provide an exceptional level of conv
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. Product Advice: The supplied track will have a length equal to 4x the individual door width plus 100mm. Opening sizes; the best opening size to aim for is 10mm less in height and 20mm in width than your chosen door size so the door "covers" the full opening and more, we have listed these in the door size options but you can choose to fit them to a smaller opening width / height. The type of architrave used or existing can impact on visible clearances. Prices show the door and track combined cost, all prices are inclusive of vat and UK wide delivery which may be from 2 or more suppliers. Tracks are aluminium and have hanging brackets for a secure wall fixing, the top wall plate, pelmet top and pelmet facia are not included. There is a maximum 2051mm floor to top of track height requirement for all variations (if using a 1981mm high door) which includes some track adjustable tolerances for discrepancies to wall and floor levels, please note that the surface fix brackets are over and above these height requirements. Door will require a groove to be routered in the bottom of it to suit the floor guide, no bottom track required in order to allow for a clear threshold so there is no trip hazard encountered with this track. Be very careful when setting any handle position and the track "stop" to prevent hand injuries. All doors are 35mm thick and have a solid or semi solid core covered with a quality timber veneer or surface material for painted and white versions. See our full range of handles and fittings here. Any multiple door product, EG; door pairs, sliding double doors, folding doors or double pocket doors are individual doors put together as a product visual, please note we cannot guarantee that the veneers and colour will be an exact match but every care will be taken to provide you with the closest match possible. Note: All these items are supplied in kit form, not assembled. Please note all Thruframe door products are cut to size upon receipt of order and cannot be cancelled afterwards, they are classed as a bespoke item created and manufactured by DirectDoors.com.
POCKET DOOR SYSTEM: A router will be required for door(s) installation. System operation viewed from above: Our all new Ermetika interior double pocket door systems have free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door maybe supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 100mm (4") - which is one the standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 79mm. Size limitations apply for the following items -Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener is included, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the Easy stop AB twin dual soft closer/opener will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. DOORS: The doors are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section. Eco-Urban Slimline Industrial Door Range: our own UK-manufactured range of high-quality hand made interior doors to replace the Weekamp range we have now removed. All doors from DirectDoors Bespoke Slimline range are 40-45mm thick, rail & stile breadths are 90mm, astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm. Please note, the 90mm rails require no more than a 50mm flush handle to be fitted. All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion. The beauty of the grain may be visible on some of the real wood door material.
POCKET DOOR SYSTEM: A router will be required for door(s) installation. System operation viewed from above: Our all new Ermetika interior double pocket door systems have free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door maybe supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener is included, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the Easy stop AB twin dual soft closer/opener will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match. DOORS: The doors are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section. Eco-Urban Slimline Industrial Door Range: our own UK-manufactured range of high-quality hand made interior doors to replace the Weekamp range we have now removed. All doors from DirectDoors Bespoke Slimline range are 40mm thick, rail & stile breadths are 90mm, astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm. Please note, the 90mm rails require no more than a 50mm flush handle to be fitted. All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion. The beauty of the grain may be visible on some of the real wood door material.
POCKET DOOR SYSTEM: A router will be required for door(s) installation. System operation viewed from above: Absolute Evokit, when you don’t want to see any architraves or jambs, just a modern, clean finish allied to a cutting edge system for a truly contemporary feel. Our all new Ermetika interior double pocket door systems have a free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the door straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, the door may be supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika Absolute Evokit pockets are available in one standard width for a finished wall thickness of 100mm but it is envisaged that the 125mm will be available in the future. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") which is the standard studwork size generally in use, so that you can directly continue using the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of 100mm (4") four inches. An Easy stop AB twin dual soft closer/opener accessory to close the door slowly and softly is included. Other items such as flush door pulls can be purchased separately, doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed within your own wall when installing. Note: These are two individual doors put together as a pair and as such we cannot guarantee a perfect colour match. DOORS: The doors are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section. Eco-Urban Slimline Industrial Door Range: our own UK manufactured range of high-quality hand made interior doors to replace the Weekamp range we have now removed. All doors from DirectDoors Bespoke Slimline range are 40mm thick, rail & stile breadths are 90mm, astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm. Please note, the 90mm rails require no more than a 50mm flush handle to be fitted. All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion. The beauty of the grain may be visible on some of the real wood door material.
Interior steel french doors have long been a favorite choice of homeowners and the perfect design for homes. The glass panes allow plenty of natural and maximum light into the home, creating a beautiful spacious look. Interior french doors are perfect for separating two rooms that you will occasionally want to enjoy as a single large space. Our interior steel french doors with an 8-Lite panel and square top are attractive and glamorous! They will surely make your home decor look alluring. If you’re looking for a unique and elegant piece of the interior door for your dining, living, bed, and study room. Our interior steel french doors would be a great choice to bring style and elegance to your home! SPECIFICATIONMaterial: Our wrought iron doors are handmade using heavy-duty 12-gauge steel.Glass: 8mm single-pane tempered glass for interior french doors. Jamb: 2" standard jamb size to make the iron interior door simple and neat.Finishes: All metal frame doors are zinc galvanized and coated with a clear lacquer to protect them from rust & corrosion.Flush Bolt: There are dual T-Astragal flush bolts to hold the inactive leaf of the double doors. Both door leaves can be opened if you unlock the flush bolt. You can also choose to remove it for the interior door.Hinges: Heavy-duty ball-bearing hinges that ensure the security of the door.Installation: This door is a pre-hung and pre-drilled unit, making it easy to install.Customization: We offer opportunities for a fully customizable design to match your personal taste. If you find that the size and design you want are not listed on our website, feel free to contact us.Notice: Due to hand-forged craftsmanship, every piece of custom-made product may look different from that picture shown. Small differences in the design and finish may occur. Please refer to the final CAD drawing. We do not consider product variances as defects.
Pryda Black Tinted Glazed Double Flush Pocket Door Set Add understated elegance to your space with the Pryda Black Tinted Glazed Double Flush Pocket Door Set. Its sleek, industrial design and tinted glass panes add a touch of modern sophistication while still allowing natural light to brighten your interior. Upgrade y
Introducing the Brixton Black Single Evokit Pocket Door with Clear Glass, featuring prefinished excellence and a contemporary touch.
POCKET DOOR SYSTEM: A router will be required for door(s) installation. System operation viewed from above: Our all new Ermetika interior double pocket door systems have free delivery as standard, these pocket doors come with full fitting instructions and the door system allows you to slide the doors straight in to a cavity in a preformed wall aperture, the system incorporates a galvanised steel cassette section and a track set with all fittings, soft close is also included. The door maybe supplied with full decoration but no decor is included to the cassette system parts or its frame, check each door as you browse for the exact details. See our "Dimensions PDF" for all sizes but use as a guide only. The Ermetika pockets are available in two standard widths for a finished wall thickness of either 100mm or 125mm. Email [email protected] to receive a quote for any special sizes. The idea is to build the pocket to the same thickness as the studwork - 75mm (3") or 100mm (4") - which are the two standard studwork sizes generally in use, so that you can directly continue the standard 12.5mm plasterboard over the pocket providing the finished wall thickness of either 100mm (4") or 125mm (5"). Further layers of plasterboard can be added to increase the overall wall thickness, but other joinery work may be required. The inner door cavity (where the door slides in to the cassette pocket) is therefore 54mm or 79mm. Size limitations apply for the following items - Soft Close, Self Close and Simultaneous Openers - please refer to the individual accessory description. The Easy stop AB twin dual soft closer/opener is included, all other accessories for pocket doors including flush door handles can be purchased separately. Please Note: If the Simultaneous Opener is purchased, the Easy stop AB twin dual soft closer/opener will not be included as the two are not compatible with each other. However, another suitable type of soft closer will be provided. Doors will require a routered channel to be created in the bottom of each door to accommodate the supplied track guides. The double pocket door frame must be concealed with your own wall and architraves when installing. Note: These are two individual doors put together as two pairs and as such we cannot guarantee a perfect colour match. DOORS: The doors are premium primed and need to be finished on site - please refer to the "Door Finish" PDF in the PDFs section. Eco-Urban Slimline Industrial Door Range: our own UK-manufactured range of high-quality hand made interior doors to replace the Weekamp range we have now removed. All doors from DirectDoors Bespoke Slimline range are 40mm thick, rail & stile breadths are 90mm, astragals are 34x40mm. All dimensions and thicknesses are +/- 2mm. Please note, the 90mm rails require no more than a 50mm flush handle to be fitted. All edges and cut-outs should be treated before final fitting, failure to treat bare timber may lead to excessive changes in moisture content which will cause timber to shrink or swell, possibly causing splits or distortion. The beauty of the grain may be visible on some of the real wood door material.
