Using a sliding door design in your home can help maximise the space while creating the flexibility to change to open concept layout or keep private.
2 door wardrobes - 152.5cm, 182.5cm, 202.5cm, 242.5cm, 272.5cm or 302.5cm3 door wardrobes - 227.5cm, 272.5cm, 302.5cm, 362.5cm, 407.5cm or 452.5cm4 door wardrobes - 302.5cm, 362.5cm or 402.5cmIt is possible to combine different door widths to create other sizes.Customisation is also possible on this wardrobe. Heights available - 226cm, 242cm and 258cmPlease note that the smaller doors; 72.5cm, 87.5cm and 97.5cm are made of a single piece panel.The larger doors; 117.5cm, 132.5cm and 147.5cm have a horizontal profile halfway up the door as shown in the main image.
Using a sliding door design in your home can help maximise the space while creating the flexibility to change to open concept layout or keep private.
As regular readers will know, we have been slowly but surely (some would say pretty quickly actually!) updating our family…
I thought I'd already found the best example of a BILLY hack already and then this project came to my attention...
Sliding Doors costume designer Jill Taylor talks trying to make Gwyneth Paltrow look bad and a full wardrobe by Calvin Klein.
The BEST and easiest way to extend a Pax wardrobe and make it look built-in. This IKEA Pax hack is renter-friendly & gives you more space!
A router will be required for door(s) installation. Please click here to find our manufacturers care and decoration advice for this door. Configurations & Advice: Tracks length: Track will be supplied to suit each configuration. Door / Frame Finishes: Prefinished oak doors have unfinished oak frame materials, Unfinished Oak doors have unfinished oak frame materials, Prefinished walnut, white primed, black primed and black prefinished doors have white primed frame materials. Any mention of pre-finishing is to the door, the frame is supplied unfinished, all fittings such as track, track guides, guide channel, soft close anti-slam components, door track stops as well as the MDF frame components are all supplied. Sizes have allowed for a 20mm door overlap. No interior furniture, shelving etc is included, neither are the wall, frame screws, fixings or your choice of handles. All Doors can open left or right but please refer to the diagrams and PDF for more clarity. You simply decide when you install them and discard the track door stops that can be used to keep a door or doors in the fixed position should you so wish. Frame linings are 108mm or 133mm broad and 30mm thick and once again have an MDF solid core construction, kits are supplied with an exterior lintel pelmet to cover the track face and the space between the top of the door and the underside of the track. All wardrobe doors can be trimmed but remember you will also need to cut the frame to suit the reduced doors, this will not be difficult, no handles supplied, please buy the handle you require separately. Note: All these items are supplied in kit form, not assembled. Please note all Thruframe door products are cut to size upon receipt of order and cannot be cancelled afterwards, they are classed as a bespoke item created and manufactured by DirectDoors.com. See our full range of handles and fittings here. Any multiple door product, EG; door pairs, sliding double doors, folding doors or double pocket doors are individual doors put together as a product visual, please note we cannot guarantee that the veneers and colour will be an exact match but every care will be taken to provide you with the closest match possible. Assembly Tip: We all know veneers can vary in colour and grain. As soon as you're ready to begin we suggest standing your doors against a wall - look at the colour/grain and turn any or all doors 180 degrees to get the best match so that your completed installation is as good as it can be. Grain variation is natural - should you require "book marked" grain you would require the doors to be manufactured. Small variations in design features is not uncommon. Skirtings and architraves may be available for this wardrobe set, please contact us for a quotation.
Have dated, old sliding closet doors you want to replace? Before you do try this DIY sliding closet door makeover with shiplap paneling on a budget for a new modern look.
Open this solution in the planner tool to change the size or color of the rails, door frame or panels. You can also add or remove doors until you find your favorite solution. The doors can be assembled in any order you like. Just remember that you should be able to reach and open anything being stored behind the doors. Two people are needed to assemble this solution. Installing sliding doors can require a professional carpenter. We recommend that you always use our Assembly service when buying SKYTTA. It’s possible to mount the doors even if they slightly overlap. However, we don´t recommend this if you use transparent panels since the overlap will show when the doors are closed. SKYTTA door frames and rails are available in white, black and aluminum. You can open either 1 door at a time, or slide 2 doors behind the 3rd. In order for the sliding doors to function properly, it's very important that your floor and ceiling are completely even and aligned. Product is possible to recycle or use for energy recovery, if available in your community. Sliding door frame Aluminium (min. 70% recycled), Anodized 4 panels for sliding door frame Glass Hardware pack f triple track rail/ hardware package for middle door Steel, Acetal plastic, Reinforced polyamide, Galvanized Rail for sliding door frame Cover strip: Aluminium (min. 70% recycled), Anodized Support rail: Solid pine, Stain Clothes rail/ mesh basket/ pull-out shoe shelf Steel, Epoxy/polyester powder coating Divider for frame Partition: Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging, Plastic edging Bottom panel: Particleboard, Paper foil Top panel: Particleboard, Paper foil, Plastic edging, Plastic edging Drawer Drawer: Particleboard, Paper foil, Plastic edging Drawer bottom: Fiberboard, Acrylic paint Pull-out rail for baskets Main parts: Steel, Pigmented epoxy/polyester powder coating Wheel: Acetal plastic Shelf Particleboard, Paper foil Wardrobe frame Particleboard, Particle- and fiberboard with honeycomb paper filling (100% recycled paper), Plastic edging, Plastic edging, Paper foil Sliding door frame/mesh basket/drawer/pull-out rail for baskets/pull-out shoe shelf/shelf/wardrobe frame/hardware pack f triple track rail/hardware package for middle door/rail for sliding door frame/clothes rail/divider for frame Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth. Assembly instructions SKYTTA Sliding door frame 804.977.27 SKYTTA Sliding door frame 804.977.27 SKYTTA Sliding door frame 404.977.34 SKYTTA Sliding door frame 404.977.34 SKYTTA Hardware pack f triple track rail 805.000.65 KOMPLEMENT Clothes rail 302.568.91 KOMPLEMENT Divider for frame 602.463.96 KOMPLEMENT Drawer 902.463.52 KOMPLEMENT Drawer 102.463.08 KOMPLEMENT Pull-out rail for baskets 302.632.45 KOMPLEMENT Pull-out shoe shelf 002.574.63 KOMPLEMENT Pull-out shoe shelf 802.574.64 KOMPLEMENT Shelf 702.779.57 KOMPLEMENT Shelf 302.779.59 PAX Wardrobe frame 202.145.66 PAX Wardrobe frame 702.145.59 Other documents AULI 4 panels for sliding door frame 602.112.74 AULI 4 panels for sliding door frame 102.112.76 PAX Wardrobe frame 202.145.66 PAX Wardrobe frame 702.145.59
Build a DIY Sliding Barn Door Console to hide your TV and add tons of storage that is perfect for any room. Free plans and tutorial at www.shanty-2-chic.com
Deze kledingkast is geïnspireerd door klassiek Scandinavisch meubelontwerp met strakke lijnen en een luchtige uitstraling. Voor het opbergen van kleding en spullen - en een blikvanger in je huis.
