An auto rotisserie, or at least an auto body cart will be the single most cherished tool In your garage. For a frame off auto restoration job, it can be a life saver, or at the very least a real back saver. For the average guy who is about to take...
I couldn't justify spending over $1000 on a car rotisserie so I built my own. I have no money at all invested in this rotisserie. I borrowed two engine stands off of a friend, and I made the brackets out of some angle iron that I had lying around. If I did have to buy all of the materials I could have built this for under $150 The front brackets were made from 1/4" thick angle iron that I had left over from an addition that I had put on my house. The brackets were then bolted to the existing bumper bracket holes. The rear bracket was made from the same steel as the front. This bracket was also bolted on using the existing bumper bracket holes. View from the front. View from the side. Before the car is flipped the fenders, doors, and deck lid will be removed. Here is a view of the car on its side. The engine stands are not quite tall enough to get the car completely on it's side. The underside of the quarter panel hits off of the leg of the engine stand. This problem could be eliminated by buying some square tubing and extending the height of the engine stand, but for my purposes this is flipped as far as I need it to be. Also they are not my engine stands so I didn't think the owner of them would have appreciated me cutting them and adding an extension to them. Front view Side View
I couldn't justify spending over $1000 on a car rotisserie so I built my own. I have no money at all invested in this rotisserie. I borrowed two engine stands off of a friend, and I made the brackets out of some angle iron that I had lying around. If I did have to buy all of the materials I could have built this for under $150 The front brackets were made from 1/4" thick angle iron that I had left over from an addition that I had put on my house. The brackets were then bolted to the existing bumper bracket holes. The rear bracket was made from the same steel as the front. This bracket was also bolted on using the existing bumper bracket holes. View from the front. View from the side. Before the car is flipped the fenders, doors, and deck lid will be removed. Here is a view of the car on its side. The engine stands are not quite tall enough to get the car completely on it's side. The underside of the quarter panel hits off of the leg of the engine stand. This problem could be eliminated by buying some square tubing and extending the height of the engine stand, but for my purposes this is flipped as far as I need it to be. Also they are not my engine stands so I didn't think the owner of them would have appreciated me cutting them and adding an extension to them. Front view Side View
Car Rotisserie gear driven handle for easy one man operation. The must have tool for restoring your pride and joy, 2000kg capacity
Weaver® W-Rotisserie Auto Rotisserie #1 best seller! Warehouse pick-up price is now $1649.00. Our Weaver® W-Rotisserie Auto Rotisserie can only be described as "The Complete Package." It includes 3 Sets of free adapters and 1 set of free door bars - a $205.00 value! The Weaver® W-Rotisserie is powder-coated black and ships complete with adapters and hydraulics. Now with new balancing adjustment rods also included! Free Shipping to Over 70% of the USA - See Where It's Free The pricing includes shipping from the warehouse closest to you. If the product is not in stock at the warehouse closest to you but is in stock from a further warehouse, we will ask if you would like to get a quote to ship from the other warehouse or wait for the item to return to stock. This is typically a small additional cost. For a limited time, all hydraulics and accessories are included! But hurry before we change our minds! Restore your next project car body or frame with this professional-grade auto body rotisserie. Priced for the enthusiast, built for the professional – provides 360º of rotation with "Bottoms Up" access for paint removal, bodywork, and painting. Fully adjustable length and width allow you to flip and turn almost any project. Our rotator handle allows easy rotation of balanced assemblies. Dual hydraulic cylinders provide for easy mounting and get your project to the right working height. The Weaver® W-Rotisserie Auto Rotisserie can be used to restore both frames and full bodies. It has a durable powder-coat finish and can be easily disassembled for storage. Six 6" polyurethane swivel casters (2-locking, 4-standard) are included to provide for easy movement. (The new heavy-duty caster is black poly). Special adapters are available to fit your needs. Please read our learn page for more information about our restoration with car rotisserie or contact Derek Weaver Company, Inc. In addition to this product, we also carry a wide range of car lifts, motorcycle lifts, and accessories, including tire changers, air compressors, two-post lifts and much more. Leaf Spring Brackets $35.00 Retail PriceFREE for a Limited Time Uni-Body Brackets $35.00 Retail PriceFREE for a Limited Time Universal Door Bars $100.00 Retail PriceFREE for a Limited Time Valance Brackets $35.00 Retail PriceFREE for a Limited Time Weaver® W-Rotisserie Product Specs Capacity 3000 LBS. Mounting Brackets Width 14 1/4" - 48 3/4" Overall Width (Body) 85" Working Height Range 20 1/2" - 48 1/2" Overall Length 19' Minimum Ceiling Height Needed 8' Door Bar Range Approx. 49" - 69" Warranty 1 YR Thickness Of Steel 3.2 mm / 0.128" (10 Gauge) Material Main Structure 3"x 3" Square Tubing Shipping Weight 600 LBS. The distance between the highest center point of rotation and the lower bolt on the base is approx. 4 feet.
There is always some new product coming onto the market and promises to make life easier for each of
Everything you need to build a car rotisserie is in these plans. I have 3 different sets of plans available both the auto body rotisserie and the body lift and roller. I also include body lift and roller instructions that will show step by step how to use it to remove and flip your car […]
Item specificsConditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging ... Read moreabout the conditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab Assembly RequiredSee DescriptionBrandHICapacitySee DescriptionColourN/ACompatible BrandSee DescriptionCushion ColourSee DescriptionCushion Fill MaterialSee DescriptionEraSee DescriptionItem DepthNot specifiedItem DiameterSee DescriptionItem Height28,5Item LengthNot specifiedItem Weight140 kgItem Width45,5MPN141966Manufacturer Part Number141966Manufacturer Warranty2 YearsMaterialSteelMaximum LengthSee DescriptionMaximum Seat HeightSee DescriptionMinimum LengthSee DescriptionModification DescriptionSee DescriptionNumber of Items in Set1Number of Reclining PositionsSee DescriptionOriginSee DescriptionPart TypeSee DescriptionProduction StyleSee DescriptionSeating CapacitySee DescriptionShapeSee DescriptionStyleHand ToolsSuitable ForSee DescriptionTypeHand ToolsVintageSee DescriptionWeight CapacitySee DescriptionWood ToneSee DescriptionEAN8718475968931
Below you will find the auto rotisserie plans with a capacity of 3000 lbs. these auto rotisserie plans are the end result of many days and hours of trial and error to get the perfect balance of usability vs cost.
I found this here: http://forums.pelicanparts.com/showthread.php?s=&threadid=228044&highlight=Flank Yeah, I know it's a 911, but this is about the...
The plans below are an entirely different take on car rotisserie plans. These car rotisserie plans were designed for a "one man show" kind of guy.
An auto rotisserie, or at least an auto body cart will be the single most cherished tool In your garage. For a frame off auto restoration job, it can be a life saver, or at the very least a real back saver. For the average guy who is about to take...
Introducing the M7K. The bigger, badder MaxJax. Everything you loved about the M6K is back, but now with an even higher lifting capacity. Our engineers found a way to let you safely lift up to 7,000 lbs. while still retaining a minimal footprint. Thanks to its unique portable 2-post design, the MaxJax M7K offers greater versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems."}},"base-catalog-319496341":{"__typename":"BaseProduct 3,000-lb. capacity 360-degree rotation with 12 locking positions Heavy-duty tubular steel construction Heavy-duty balancing system Adjustable height 17-3/4 in. to 45-1/4 in. mounting arms to floor 16-in. mounting arms used for direct mounting or optional accessory mounting Telescoping bar allows adjustment up to 21 ft. 6 in. Dual 6,000-lb. capacity jacks adjust working height Six phenolic resin lockable casters Durable powder-coat finish
An auto rotisserie, or at least an auto body cart will be the single most cherished tool In your garage. For a frame off auto restoration job, it can be a life saver, or at the very least a real back saver. For the average guy who is about to take...
How do you go about restoring a car, especially if you need to access hard to reach areas such as the undercarriage? That’s where specialty automotive equipment, such as a car rotisserie, comes into play.
We offer the best auto rotisserie plans on the internet.
An auto rotisserie, or at least an auto body cart will be the single most cherished tool In your garage. For a frame off auto restoration job, it can be a life saver, or at the very least a real back saver. For the average guy who is about to take...