How to Paper a Ceiling by Yourself. Wallpapaer on ceilings is a new trend in homes. How to hang wallpaper on the ceiling on your own. Step by step

Have some rooms with low ceilings that are making you feel closed in? Find out how to make ceilings look higher so it's not as noticeable.

This modern led ceiling light is simple, chic, and modern; Greatly suitable for living room, meeting room, kitchen, kitchen island.

This modern led ceiling light is simple, chic, and modern; Greatly suitable for living room, meeting room, kitchen, kitchen island.

Have some rooms with low ceilings that are making you feel closed in? Find out how to make ceilings look higher so it's not as noticeable.

Have some rooms with low ceilings that are making you feel closed in? Find out how to make ceilings look higher so it's not as noticeable.

Have some rooms with low ceilings that are making you feel closed in? Find out how to make ceilings look higher so it's not as noticeable.

Sharing some easy ceiling painting tips today that make the whole job so much less painful. No one loves painting ceilings, but you can keep your sanity.

So, those unsightly popcorn ceilings are gone thanks to lots of scrapage (tutorial here) and arm strength but now what? You've uncovered bare drywall and all of the drywall mud (those white stripes) but the ceiling isn't exactly smooth...yet. If you just painted over the ceiling at this point, you'd see lots of ridges, lines, and shallow craters - the lines of the mud and the craters left behind from halfway filling in the screw holes holding the drywall up. Not pretty and definitely not the result you want after spending all of that time scraping. Note: The following method of finishing the ceilings came after some trial and error, very unfortunately. We spent a few extra hours doing things the wrong way...or maybe just a less efficient way that I won't get into because it's worthless. Just so you know... ;) Here's how we finished our ceilings - the most efficient (and least messy) way. First, we filled in all of the screw craters with spackling. There was still popcorn texture left up inside these craters after scraping but there's no need to wipe that out before you fill. We used a two-inch putty knife and one quick swipe with this putty* to fill in each crater; that was all it took. You'll just want to make sure you get enough putty in there to fill the entire crater. You can even overfill it. It'll dry and get sanded flush later. Also, make sure you use brand new spackling to do this. Older spackling is more dry (though sometimes you can add water to it to liven it up) and it's much harder to swipe on. Since you'll be filling tons of craters, you'll want to make life as easy as you can and use super smooth, new spackling. Trust us because, sadly, we'd know. Once the spackling dried, we then sanded the mud lines until there were no ridges (just run your finger over the edges of the mud lines after a few passes with the sander to see when you've got it smooth). Along with the mud lines, we sanded the crater holes that we had just filled. Using a medium-grit (120) sanding screen*, we only had to go over each ridge/crater a couple of times before it was smooth. It wasn't an exorbitant amount of sanding...thank goodness. And bonus: if you accidentally left a little popcorn texture behind during scraping, no worries, this step will obliterate it. Two VERY important FYIs for this part of the process. 1) If you don't want drywall dust EVERYWHERE, this vacuum sander* is a must-have. It attaches to a utility vacuum (like a Shop-Vac) and sucks up all of the dust you sand off. We bought it off Amazon after it was recommended to us and I would have paid twice what we did for it because it was that worth it. Really and truly. We started covering the floors when we first started sanding but realized it was completely unnecessary after there wasn't any dust on the plastic or even on our clothes. So then we went rogue and didn't cover anything. Ha! 2) If you're going the sander + vacuum route (why wouldn't you?!), you will absolutely need to buy HEPA bags* for your vacuum to catch all of the dust. Abso-freaking-lutely. If you don't, you will start sanding and minutes later, your vacuum will start choking on the super fine particles of drywall dust AND start spewing them out into the room. Ask us how we know. That was the death of our old Shop Vac (that we had had for ten years) and why we had to buy this new one*...which is awesome, we love it, but still...HEPA bags.* Don't forget. After sanding, we gave the ceiling a once over with a damp sponge mop just to remove any dust. If you don't use the sander + vacuum route (again, why wouldn't you?!) you'll probably have more dust to wipe off so you might want to go for a twice over. Then it was prime time. We used this Kilz 2 Primer. If you're painting ceilings over floors that are getting torn out and you don't care too much about tiny flecks of primer and paint getting all over yoself, a regular paint roller with extension rod will work for you just fine. And honestly, that's the easiest way to go. But, if you want a little more protection, we started out using this roller plus shield and really liked it. The cover part pivots so you can move it around depending on the angle you're painting. (We used to have a stationary cover like this and it was hard to make sure you didn't scratch the ceiling with the cover. You had to really pay attention to the angle.) Sadly, I propped that roller up along a wall in a bathroom a few days after we bought it and it fell...and broke. So, for the remainder of our painting, we covered the floors, our arms, and hair and painted sans cover. Mid-priming: Once primed, we painted with Sherwin-Williams Master Hide flat paint tinted to their Pure White. It was recommended to us after we searched for an ultra flat paint. We really love how flat it truly is (a lot of flat paints these days aren't as flat as they used to be because everyone wants their paint to be scrubbable which means it's got to have some sort of sheen to it...so I heard) but we did need two coats of paint for full-coverage. This is after the one coat of primer and one coat of paint: Still slightly splotchy. And this is what this ceiling looks like today, all finished: It's hard to photograph how good they look. As you can see, we didn't really pay attention to keeping paint off of the crown molding since it's also going to get painted. But, we did remove all of the vents, scrape the popcorn underneath, paint underneath, and then spray paint the vents white to match the ceilings. I did this on all of the vents in our old house and, for the seven years we lived there, they all held up fantastic, never needing to be touched-up. All hail spray paint. We are SO happy with how our ceilings turned out and, once again, there's no regret here in taking on the project. We've got the kitchen and den ceilings left to do but we're waiting on a wall to come down first before we finish them up. More on that later! As always, send me any questions and let me know if I need to clarify anything! If you have popcorn ceilings that you've been dreaming of making smooth, DO IT! I promise you, you'll love it! We will cheer you on! :D . . . *These links are affiliate links which means that, if you click over and/or make a purchase through the link, we may receive a small commission at no extra cost to you. All of these links will lead you to things we actually paid for or that are similar to the item we paid for in case ours is thrifted/sold out/secondhand. This extra money helps us with the costs of running the blog. Thank you for your support and for fueling our love to share all things DIY!

This work is the office and exhibition hall for "Tuscana" sun shading system form Italy in Shanghai, Space is obsessed with an endless exploration of fragmentary forms, and expresses fragmentary、insubstantiality and poetry of the work.

This work is the office and exhibition hall for "Tuscana" sun shading system form Italy in Shanghai, Space is obsessed with an endless exploration of fragmentary forms, and expresses fragmentary、insubstantiality and poetry of the work.

Dining Room

Have some rooms with low ceilings that are making you feel closed in? Find out how to make ceilings look higher so it's not as noticeable.