Are you looking for how to refinish a secretary desk? If you are keep reading to find out how I refinish my own desk. I love a good refinishing project! DIY Refinish Secretary Desk Well,
Free Plans and woodworking tutorial to build this DIY Flip Top Secretary desk as seen on HGTV's Open Concept! Great home office idea!
When I was growing up my mom had a real, antique secretary cabinet. You know, the kind with the drop-front desk and all the little nooks and crannies inside. Even back then it made my heart pitter-patter with desky joy. Which brings us to today's plan for a classic secretary desk! I just love pieces like this that are timeless and functional. P.S. Check out the rest of our free DIY Desk Plan Series here! We'll start with a few more secretary inspirations for you. Like this fresh painted version. image source You guys know I love a Mid-Century Modern. I love that style vibe in this desk, but also wanted to show how you could get something more this shape by adding more drawers to the bottom of your desk. You can also cut notch drawer pulls! image source I love an antique desk, and this one is no exception. You can tuck this in just about any corner and have a perfect, cozy little workspace. P.S. Every secretary should probably have a globe on top. image source Nooks and crannies, crannies and nooks. One of my favorite things about a secretary is the built-in storage. Tiny drawers, tiny shelves, or a mix of both. Get creative in your secretary and build the best storage for you. image source Last but not least, this simple and sweet little guy. Fair warning: this is a more advanced plan with a lot of parts. I wouldn't recommend it as a first project. But don't panic! We have a much simpler version of a secretary desk on day 6, and a wall-mount version coming later in the series! Shopping List: 1 - 2x2 @ 10' (or two 6' boards if your store doesn't have a 10') 1 - 1x6 @ 8' 1 - 1x6 @ 6' 11" scrap of a 1x2 1 - 1x4 @ 6' 1 - 1x8 @ 6' 1 sheet 3/4" plywood 1/4 sheet 1/4" plywood (for interior drawer boxes) two hinges 1 set 16" drawer slides (we love full extension slides) knobs or pulls for the drawer two small knobs for the pull-outs three small knobs for the inside drawers Kreg Jig and 1 1/4" pocket hole screws 1 1/4" wood screws (and 2" wood screws if you don't have a Kreg Jig) finishing nails wood glue sandpaper and finishing supplies Cut List: (A) 4 - 2x2 @ 28" (legs) (B) 2 - 1x6 @ 15 1/2" (base sides) (C) 1 - 1x6 @ 27" (base back) (D) 1 - 3/4" plywood @ 30 x 18 1/2" (base bottom) (E) 2 - 1x6 @ 17 3/4" (dividers) (F) 2 - 1x6 @ 17 3/4" (slides) (G) 2 - 1x2 @ 5 3/8" (stops) (H) 1 - 1x4 @ 22 3/4" (drawer back) (I) 2 - 1x4 @ 16 1/4" (drawer sides) (J) 1 - 3/4" plywood @ 17 x 22 3/4" (drawer bottom) (K) 1 - 1x6 @ 23 1/2" (drawer front) (L) 1 - 3/4" plywood @ 28 1/2 x 17 3/4" (hutch bottom) (M) 1 - 3/4" plywood @ 28 1/2 x 14 7/8" (hutch back) (N) 2 - 3/4" plywood @ 18 1/2 x 14 7/8" (hutch sides) (O) 1 - 3/4" plywood @ 30 x 10" (hutch top) (P) 2 - 1x8 @ 10 5/8" (shelf divider top) (Q) 2 - 1x8 @ 2 3/4" (shelf divider bottom) (R) 1 - 1x8 @ 28 1/2" (shelf) (S) 1 - 3/4" plywood @ 30 x 16 1/2" (front) (T) 6 - 1/4" plywood @ 2 1/2 x 6 3/4" (mini drawer side) (U) 2 - 1/4" plywood @ 7 3/8 x 6 3/4" (side drawer bottom) (V) 1 - 1/4" plywood @ 10 3/8 x 6 3/4" (center drawer bottom) (W) 4 - 1/4" plywood @ 7 7/8 x 2 1/2" (side drawer front/back) (X) 2 - 1/4" plywood @ 10 7/8 x 2 1/2" (center drawer front/back) Dimensions: 30" wide x 18 1/2" deep x 43 5/8" tall Measure twice, cut once (seriously, though). Use glue in every step. Read through all the instructions before you begin. Use 1 1/4" wood screws unless otherwise indicated (any time we mention the Kreg Jig or pocket holes, you'll be using the 1 1/4" pocket hole screws). Pre-drill and countersink all your screws. Be safe, have fun, and let me know if you have any questions! Attach two legs (A) to each side (B). They should be flush at the top. Use a Kreg Jig, or drill through the legs into the ends of the side board. Repeat with the remaining legs and side. If you're using a Kreg Jig, put pocket holes around the bottom edge of the sides and back boards. Connect those two leg section with the back board (C). Make sure it's flush with the top and attach it in the same way you did the side pieces. Cut notches in each corner of the base bottom (D) that are 1 1/2" wide and deep. Slide the bottom board up under the side and back boards. The notches will fit around the four legs. Attach the bottom board to the sides and back using a Kreg Jig, or by drilling up through the bottom into the sides and back. Put in the two divider boards (E). Make sure they are straight because you'll be attaching the drawer slides to these later. They should be set in 7/8" from the legs. Attach them with pocket holes in the back and bottom edges of the divider, or by drilling in through the back and bottom boards into the divider. Start by shaving each slider down to be 5 3/8" tall. Then attach a stop (G) to each slider (F). It should be flush with the top and bottom edges to slide smoothly, and be set in 3/4" from the back edge. Set a slider into each space left by the dividers, with the stops toward the back. Next build the drawer box. Attach the two drawer sides (I) to the drawer back (H). Use pocket holes in the sides, or drill through the back into the ends of the side boards. Attach the drawer bottom (J) by drilling up through the bottom into the sides and back. follow the instructions on your drawer slides to install your drawer box. Make sure the box closes all the way against the back of the cabinet, leaving it inset 3/4" from the front face. Shave down the drawer front (K) to be 5 1/4" tall. Install the drawer front with a 1/8" gap on each side and at the bottom. This will leave a 1/8" gap at the top later. If you prefer you can wait and attach the drawer front after the hutch is installed. To build the hutch, start by attaching the hutch bottom (L) to the hutch back (M). Use pocket holes along the back edge of the bottom board, or drill through the back into the edge of the bottom board. Cut the front edges of the sides (N) at an angle. Measure in 10" from the top right, and 3/4" up from the bottom left. Draw a line connecting those two marks and cut along the line. Then attach the sides to the hutch. Use pocket holes along the sides of the back and bottom, or drill through the sides into the back and sides. Attach the hutch top (O) using pocket holes along the top of the back and sides, or by drilling down through the top into the back and sides. Attach the hutch to the base. You can drill down through the bottom into the tops of the legs and dividers. Build the interior shelving. This is just one option. You can build any configuration you like, or leave it out all together! Use a Kreg Jig to attach the top dividers (P) and bottom dividers (Q) to the shelf (R). They should be set in 8" from each side, with an 11" opening in the middle. Fit the shelving into the hutch. Attach it with finishing nails. Nail through the top and sides into the ends of each shelf and divider. You could also use screws, but nails won't leave large holes to fill. Fit the front onto the cabinet and use the hinges to attach it. You can add hinge supports if you want, but this desk has the classic pull-out sliders to support the desktop while you work. Last but not least, you can make three mini drawers to fit into the shelves. You'll be making two narrow drawers and one wide drawer. Start by attaching two sides (T) to each drawer bottom (U and V). The sides should be flush with the front, back, and bottom edges. Use finishing nails for this since the plywood is so narrow! Nail through the sides into the edges of the bottom boards. Attach the fronts & backs (W and X) to each drawer. Nail through the front and back into the side and bottom boards. Let the glue dry before you put them in, just to be sure they don't stick. To finish, fill any holes with wood filler then sand everything down really well. This is the most important step for a professional finish! Start with a rough sand paper, then go over everything with a medium paper, then again with a fine paper. Once it's super smooth, finish it with whatever paint or stain and sealer you like. Fun bonus project: you can add a little shelf edge around the top. And before you shoot that down, scroll a smidge to see a couple really cute versions of this. (plain desk on the right, shelf added on the left) Just add pieces of 1x4 (or any other width of board you prefer) around the top. This would be easiest with a Kreg Jig. This Ikea desk was my top-shelf inspiration. Bonus: check out that peg-board back! It's a great alternative to shelves and drawers if you want a more minimalist feel. image source It's a great place to tuck in a few books and plants, like this one. image source This project has tons of room to customize the plan and make it your own. Have fun! That's it! Come back tomorrow for another DIY desk plan, and check out the full series here!
Free Plans and woodworking tutorial to build this DIY Flip Top Secretary desk as seen on HGTV's Open Concept! Great home office idea!
Let's get social
Free DIY Walk-throughs, building plans, and other crafty discussions!
After purchasing an IKEA Hemnes secretary desk as my workspace I decided to make some changes to it. Since it is sitting in my living room I felt that it needed…
When I was growing up my mom had a real, antique secretary cabinet. You know, the kind with the drop-front desk and all the little nooks and crannies inside. Even back then it made my heart pitter-patter with desky joy. Which brings us to today's plan for a classic secretary desk! I just love pieces like this that are timeless and functional. P.S. Check out the rest of our free DIY Desk Plan Series here! We'll start with a few more secretary inspirations for you. Like this fresh painted version. image source You guys know I love a Mid-Century Modern. I love that style vibe in this desk, but also wanted to show how you could get something more this shape by adding more drawers to the bottom of your desk. You can also cut notch drawer pulls! image source I love an antique desk, and this one is no exception. You can tuck this in just about any corner and have a perfect, cozy little workspace. P.S. Every secretary should probably have a globe on top. image source Nooks and crannies, crannies and nooks. One of my favorite things about a secretary is the built-in storage. Tiny drawers, tiny shelves, or a mix of both. Get creative in your secretary and build the best storage for you. image source Last but not least, this simple and sweet little guy. Fair warning: this is a more advanced plan with a lot of parts. I wouldn't recommend it as a first project. But don't panic! We have a much simpler version of a secretary desk on day 6, and a wall-mount version coming later in the series! Shopping List: 1 - 2x2 @ 10' (or two 6' boards if your store doesn't have a 10') 1 - 1x6 @ 8' 1 - 1x6 @ 6' 11" scrap of a 1x2 1 - 1x4 @ 6' 1 - 1x8 @ 6' 1 sheet 3/4" plywood 1/4 sheet 1/4" plywood (for interior drawer boxes) two hinges 1 set 16" drawer slides (we love full extension slides) knobs or pulls for the drawer two small knobs for the pull-outs three small knobs for the inside drawers Kreg Jig and 1 1/4" pocket hole screws 1 1/4" wood screws (and 2" wood screws if you don't have a Kreg Jig) finishing nails wood glue sandpaper and finishing supplies Cut List: (A) 4 - 2x2 @ 28" (legs) (B) 2 - 1x6 @ 15 1/2" (base sides) (C) 1 - 1x6 @ 27" (base back) (D) 1 - 3/4" plywood @ 30 x 18 1/2" (base bottom) (E) 2 - 1x6 @ 17 3/4" (dividers) (F) 2 - 1x6 @ 17 3/4" (slides) (G) 2 - 1x2 @ 5 3/8" (stops) (H) 1 - 1x4 @ 22 3/4" (drawer back) (I) 2 - 1x4 @ 16 1/4" (drawer sides) (J) 1 - 3/4" plywood @ 17 x 22 3/4" (drawer bottom) (K) 1 - 1x6 @ 23 1/2" (drawer front) (L) 1 - 3/4" plywood @ 28 1/2 x 17 3/4" (hutch bottom) (M) 1 - 3/4" plywood @ 28 1/2 x 14 7/8" (hutch back) (N) 2 - 3/4" plywood @ 18 1/2 x 14 7/8" (hutch sides) (O) 1 - 3/4" plywood @ 30 x 10" (hutch top) (P) 2 - 1x8 @ 10 5/8" (shelf divider top) (Q) 2 - 1x8 @ 2 3/4" (shelf divider bottom) (R) 1 - 1x8 @ 28 1/2" (shelf) (S) 1 - 3/4" plywood @ 30 x 16 1/2" (front) (T) 6 - 1/4" plywood @ 2 1/2 x 6 3/4" (mini drawer side) (U) 2 - 1/4" plywood @ 7 3/8 x 6 3/4" (side drawer bottom) (V) 1 - 1/4" plywood @ 10 3/8 x 6 3/4" (center drawer bottom) (W) 4 - 1/4" plywood @ 7 7/8 x 2 1/2" (side drawer front/back) (X) 2 - 1/4" plywood @ 10 7/8 x 2 1/2" (center drawer front/back) Dimensions: 30" wide x 18 1/2" deep x 43 5/8" tall Measure twice, cut once (seriously, though). Use glue in every step. Read through all the instructions before you begin. Use 1 1/4" wood screws unless otherwise indicated (any time we mention the Kreg Jig or pocket holes, you'll be using the 1 1/4" pocket hole screws). Pre-drill and countersink all your screws. Be safe, have fun, and let me know if you have any questions! Attach two legs (A) to each side (B). They should be flush at the top. Use a Kreg Jig, or drill through the legs into the ends of the side board. Repeat with the remaining legs and side. If you're using a Kreg Jig, put pocket holes around the bottom edge of the sides and back boards. Connect those two leg section with the back board (C). Make sure it's flush with the top and attach it in the same way you did the side pieces. Cut notches in each corner of the base bottom (D) that are 1 1/2" wide and deep. Slide the bottom board up under the side and back boards. The notches will fit around the four legs. Attach the bottom board to the sides and back using a Kreg Jig, or by drilling up through the bottom into the sides and back. Put in the two divider boards (E). Make sure they are straight because you'll be attaching the drawer slides to these later. They should be set in 7/8" from the legs. Attach them with pocket holes in the back and bottom edges of the divider, or by drilling in through the back and bottom boards into the divider. Start by shaving each slider down to be 5 3/8" tall. Then attach a stop (G) to each slider (F). It should be flush with the top and bottom edges to slide smoothly, and be set in 3/4" from the back edge. Set a slider into each space left by the dividers, with the stops toward the back. Next build the drawer box. Attach the two drawer sides (I) to the drawer back (H). Use pocket holes in the sides, or drill through the back into the ends of the side boards. Attach the drawer bottom (J) by drilling up through the bottom into the sides and back. follow the instructions on your drawer slides to install your drawer box. Make sure the box closes all the way against the back of the cabinet, leaving it inset 3/4" from the front face. Shave down the drawer front (K) to be 5 1/4" tall. Install the drawer front with a 1/8" gap on each side and at the bottom. This will leave a 1/8" gap at the top later. If you prefer you can wait and attach the drawer front after the hutch is installed. To build the hutch, start by attaching the hutch bottom (L) to the hutch back (M). Use pocket holes along the back edge of the bottom board, or drill through the back into the edge of the bottom board. Cut the front edges of the sides (N) at an angle. Measure in 10" from the top right, and 3/4" up from the bottom left. Draw a line connecting those two marks and cut along the line. Then attach the sides to the hutch. Use pocket holes along the sides of the back and bottom, or drill through the sides into the back and sides. Attach the hutch top (O) using pocket holes along the top of the back and sides, or by drilling down through the top into the back and sides. Attach the hutch to the base. You can drill down through the bottom into the tops of the legs and dividers. Build the interior shelving. This is just one option. You can build any configuration you like, or leave it out all together! Use a Kreg Jig to attach the top dividers (P) and bottom dividers (Q) to the shelf (R). They should be set in 8" from each side, with an 11" opening in the middle. Fit the shelving into the hutch. Attach it with finishing nails. Nail through the top and sides into the ends of each shelf and divider. You could also use screws, but nails won't leave large holes to fill. Fit the front onto the cabinet and use the hinges to attach it. You can add hinge supports if you want, but this desk has the classic pull-out sliders to support the desktop while you work. Last but not least, you can make three mini drawers to fit into the shelves. You'll be making two narrow drawers and one wide drawer. Start by attaching two sides (T) to each drawer bottom (U and V). The sides should be flush with the front, back, and bottom edges. Use finishing nails for this since the plywood is so narrow! Nail through the sides into the edges of the bottom boards. Attach the fronts & backs (W and X) to each drawer. Nail through the front and back into the side and bottom boards. Let the glue dry before you put them in, just to be sure they don't stick. To finish, fill any holes with wood filler then sand everything down really well. This is the most important step for a professional finish! Start with a rough sand paper, then go over everything with a medium paper, then again with a fine paper. Once it's super smooth, finish it with whatever paint or stain and sealer you like. Fun bonus project: you can add a little shelf edge around the top. And before you shoot that down, scroll a smidge to see a couple really cute versions of this. (plain desk on the right, shelf added on the left) Just add pieces of 1x4 (or any other width of board you prefer) around the top. This would be easiest with a Kreg Jig. This Ikea desk was my top-shelf inspiration. Bonus: check out that peg-board back! It's a great alternative to shelves and drawers if you want a more minimalist feel. image source It's a great place to tuck in a few books and plants, like this one. image source This project has tons of room to customize the plan and make it your own. Have fun! That's it! Come back tomorrow for another DIY desk plan, and check out the full series here!
Free DIY Walk-throughs, building plans, and other crafty discussions!
I haven’t done a furniture makeover in so long. And when the weather finally turned and I felt like opening the garage, I was ready to tackle this little secretary desk that I have had in the garage for over a year now, can you believe it? I bought it at a local auction and...
Update a secretary desk with chalk paint and decoupage paper! I'm sharing all the steps to achieve a brand new custom look!
Painted Secretary Desk
This small secretary desk makeover in classic black chalk paint is beautiful. It's a desk that will work in most styles of homes!
Poplar Secretary Desk: Recently, I took a woodworking class at my grad school where we had to design, draft, and build a piece of furniture. I went with a secretary desk because it A) incorporates a lot of different joinery and problem-solving, making it perfect to build…
Free Plans and woodworking tutorial to build this DIY Flip Top Secretary desk as seen on HGTV's Open Concept! Great home office idea!
This stenciled secretary desk turned out so sweet! Using stencils is a fantastic way to add a decorative touch to any furniture makeover!
When I was growing up my mom had a real, antique secretary cabinet. You know, the kind with the drop-front desk and all the little nooks and crannies inside. Even back then it made my heart pitter-patter with desky joy. Which brings us to today's plan for a classic secretary desk! I just love pieces like this that are timeless and functional. P.S. Check out the rest of our free DIY Desk Plan Series here! We'll start with a few more secretary inspirations for you. Like this fresh painted version. image source You guys know I love a Mid-Century Modern. I love that style vibe in this desk, but also wanted to show how you could get something more this shape by adding more drawers to the bottom of your desk. You can also cut notch drawer pulls! image source I love an antique desk, and this one is no exception. You can tuck this in just about any corner and have a perfect, cozy little workspace. P.S. Every secretary should probably have a globe on top. image source Nooks and crannies, crannies and nooks. One of my favorite things about a secretary is the built-in storage. Tiny drawers, tiny shelves, or a mix of both. Get creative in your secretary and build the best storage for you. image source Last but not least, this simple and sweet little guy. Fair warning: this is a more advanced plan with a lot of parts. I wouldn't recommend it as a first project. But don't panic! We have a much simpler version of a secretary desk on day 6, and a wall-mount version coming later in the series! Shopping List: 1 - 2x2 @ 10' (or two 6' boards if your store doesn't have a 10') 1 - 1x6 @ 8' 1 - 1x6 @ 6' 11" scrap of a 1x2 1 - 1x4 @ 6' 1 - 1x8 @ 6' 1 sheet 3/4" plywood 1/4 sheet 1/4" plywood (for interior drawer boxes) two hinges 1 set 16" drawer slides (we love full extension slides) knobs or pulls for the drawer two small knobs for the pull-outs three small knobs for the inside drawers Kreg Jig and 1 1/4" pocket hole screws 1 1/4" wood screws (and 2" wood screws if you don't have a Kreg Jig) finishing nails wood glue sandpaper and finishing supplies Cut List: (A) 4 - 2x2 @ 28" (legs) (B) 2 - 1x6 @ 15 1/2" (base sides) (C) 1 - 1x6 @ 27" (base back) (D) 1 - 3/4" plywood @ 30 x 18 1/2" (base bottom) (E) 2 - 1x6 @ 17 3/4" (dividers) (F) 2 - 1x6 @ 17 3/4" (slides) (G) 2 - 1x2 @ 5 3/8" (stops) (H) 1 - 1x4 @ 22 3/4" (drawer back) (I) 2 - 1x4 @ 16 1/4" (drawer sides) (J) 1 - 3/4" plywood @ 17 x 22 3/4" (drawer bottom) (K) 1 - 1x6 @ 23 1/2" (drawer front) (L) 1 - 3/4" plywood @ 28 1/2 x 17 3/4" (hutch bottom) (M) 1 - 3/4" plywood @ 28 1/2 x 14 7/8" (hutch back) (N) 2 - 3/4" plywood @ 18 1/2 x 14 7/8" (hutch sides) (O) 1 - 3/4" plywood @ 30 x 10" (hutch top) (P) 2 - 1x8 @ 10 5/8" (shelf divider top) (Q) 2 - 1x8 @ 2 3/4" (shelf divider bottom) (R) 1 - 1x8 @ 28 1/2" (shelf) (S) 1 - 3/4" plywood @ 30 x 16 1/2" (front) (T) 6 - 1/4" plywood @ 2 1/2 x 6 3/4" (mini drawer side) (U) 2 - 1/4" plywood @ 7 3/8 x 6 3/4" (side drawer bottom) (V) 1 - 1/4" plywood @ 10 3/8 x 6 3/4" (center drawer bottom) (W) 4 - 1/4" plywood @ 7 7/8 x 2 1/2" (side drawer front/back) (X) 2 - 1/4" plywood @ 10 7/8 x 2 1/2" (center drawer front/back) Dimensions: 30" wide x 18 1/2" deep x 43 5/8" tall Measure twice, cut once (seriously, though). Use glue in every step. Read through all the instructions before you begin. Use 1 1/4" wood screws unless otherwise indicated (any time we mention the Kreg Jig or pocket holes, you'll be using the 1 1/4" pocket hole screws). Pre-drill and countersink all your screws. Be safe, have fun, and let me know if you have any questions! Attach two legs (A) to each side (B). They should be flush at the top. Use a Kreg Jig, or drill through the legs into the ends of the side board. Repeat with the remaining legs and side. If you're using a Kreg Jig, put pocket holes around the bottom edge of the sides and back boards. Connect those two leg section with the back board (C). Make sure it's flush with the top and attach it in the same way you did the side pieces. Cut notches in each corner of the base bottom (D) that are 1 1/2" wide and deep. Slide the bottom board up under the side and back boards. The notches will fit around the four legs. Attach the bottom board to the sides and back using a Kreg Jig, or by drilling up through the bottom into the sides and back. Put in the two divider boards (E). Make sure they are straight because you'll be attaching the drawer slides to these later. They should be set in 7/8" from the legs. Attach them with pocket holes in the back and bottom edges of the divider, or by drilling in through the back and bottom boards into the divider. Start by shaving each slider down to be 5 3/8" tall. Then attach a stop (G) to each slider (F). It should be flush with the top and bottom edges to slide smoothly, and be set in 3/4" from the back edge. Set a slider into each space left by the dividers, with the stops toward the back. Next build the drawer box. Attach the two drawer sides (I) to the drawer back (H). Use pocket holes in the sides, or drill through the back into the ends of the side boards. Attach the drawer bottom (J) by drilling up through the bottom into the sides and back. follow the instructions on your drawer slides to install your drawer box. Make sure the box closes all the way against the back of the cabinet, leaving it inset 3/4" from the front face. Shave down the drawer front (K) to be 5 1/4" tall. Install the drawer front with a 1/8" gap on each side and at the bottom. This will leave a 1/8" gap at the top later. If you prefer you can wait and attach the drawer front after the hutch is installed. To build the hutch, start by attaching the hutch bottom (L) to the hutch back (M). Use pocket holes along the back edge of the bottom board, or drill through the back into the edge of the bottom board. Cut the front edges of the sides (N) at an angle. Measure in 10" from the top right, and 3/4" up from the bottom left. Draw a line connecting those two marks and cut along the line. Then attach the sides to the hutch. Use pocket holes along the sides of the back and bottom, or drill through the sides into the back and sides. Attach the hutch top (O) using pocket holes along the top of the back and sides, or by drilling down through the top into the back and sides. Attach the hutch to the base. You can drill down through the bottom into the tops of the legs and dividers. Build the interior shelving. This is just one option. You can build any configuration you like, or leave it out all together! Use a Kreg Jig to attach the top dividers (P) and bottom dividers (Q) to the shelf (R). They should be set in 8" from each side, with an 11" opening in the middle. Fit the shelving into the hutch. Attach it with finishing nails. Nail through the top and sides into the ends of each shelf and divider. You could also use screws, but nails won't leave large holes to fill. Fit the front onto the cabinet and use the hinges to attach it. You can add hinge supports if you want, but this desk has the classic pull-out sliders to support the desktop while you work. Last but not least, you can make three mini drawers to fit into the shelves. You'll be making two narrow drawers and one wide drawer. Start by attaching two sides (T) to each drawer bottom (U and V). The sides should be flush with the front, back, and bottom edges. Use finishing nails for this since the plywood is so narrow! Nail through the sides into the edges of the bottom boards. Attach the fronts & backs (W and X) to each drawer. Nail through the front and back into the side and bottom boards. Let the glue dry before you put them in, just to be sure they don't stick. To finish, fill any holes with wood filler then sand everything down really well. This is the most important step for a professional finish! Start with a rough sand paper, then go over everything with a medium paper, then again with a fine paper. Once it's super smooth, finish it with whatever paint or stain and sealer you like. Fun bonus project: you can add a little shelf edge around the top. And before you shoot that down, scroll a smidge to see a couple really cute versions of this. (plain desk on the right, shelf added on the left) Just add pieces of 1x4 (or any other width of board you prefer) around the top. This would be easiest with a Kreg Jig. This Ikea desk was my top-shelf inspiration. Bonus: check out that peg-board back! It's a great alternative to shelves and drawers if you want a more minimalist feel. image source It's a great place to tuck in a few books and plants, like this one. image source This project has tons of room to customize the plan and make it your own. Have fun! That's it! Come back tomorrow for another DIY desk plan, and check out the full series here!
Free DIY Walk-throughs, building plans, and other crafty discussions!
The secretary piece to the Grant Collection. Features six small drawers and a large shelf. Secretary top folds down for a desk.
Sweet friends, I am so excited about today's vintage secretary makeover! Before I get right to it, today is also Furniture Fixer Upper day where my friends are also sharing trashy furniture makeovers, so be sure to look for links to their projects at the bottom. I describe this piece in its before state as
Free DIY Walk-throughs, building plans, and other crafty discussions!
Secretary Desk Makeover w/ Duck Egg Blue & 3 Different Colored Waxes for depth and dimension! (Chalk Paint® by Annie Sloan)
I painted this secretary desk in Duck Egg blue. I use it everyday and really like it as my new office space. It is a Governor Winthro...
Buy the best Furniture Secretary Desk selected and recommended by interior designers.
*SOLD!* If you'd like a similar refinished secretary desk/secretary hutch - message me! (SOLD). This refinished secretary desk/hutch has been restored and painted in a popular blue paint color called Naval by Benjamin Moore. Featuring golden brass original hardware on the serpentine drawers and showstopping wood inlays on the glass doors. This piece would look exquisite in a living room, bedroom, office, nursery or playroom. DIMENSIONS: 77h. 29w. 15 1/4d. *To save on Etsy taxes/fees, we accept Venmo, Zelle, and PayPal as well!* *SHIPPING: PENDING FREE SHIPPING FREE TO MOST ZIP CODES* Note: This item is available for local pick up or delivery within Chicagoland, IL. Please message me prior to checkout for delivery to confirm destination address is included in free shipping.* DELIVERY: Ships free within MOST of mainland USA via private white-glove shipping carriers or curbside delivery services (which is the standard). Message me prior to checkout with your zip code. Transactions must be completed to schedule shipment. You must contact me to confirm. This item is ready to be shipped, however shipping timeframes will depend on the carrier that is chosen. **If you choose standard shipping: this includes delivery TO FIRST FLOOR ONLY. You are responsible for providing help if the item needs to be moved beyond that point.** All sales are final. Shipping costs non-refundable. I am not responsible for occurred damage during transit. *Please be aware that all furniture pieces have been pre-owned/pre-loved and most are vintage or antique. Due to their history and age, these pieces usually have perfect imperfections that give them charm, character, and uniqueness. We do not fix all imperfections for every piece. Note, antique pieces can also be more delicate and prone to wear/tear even after restoration. Customers buying furniture like this should be advised to treat their new pieces with the utmost care. *Pieces needing repair or any visible tlc have been repaired to the best of my team’s ability. Each piece is in good, working condition (unless specified in the description). *In-person paint colors as well as wax and stain shades may vary from what you see on your computer or phone screen due to lighting, monitor settings, and other variables.
Buy the best Small Secretary Desks selected and recommended by interior designers.
Poplar Secretary Desk: Recently, I took a woodworking class at my grad school where we had to design, draft, and build a piece of furniture. I went with a secretary desk because it A) incorporates a lot of different joinery and problem-solving, making it perfect to build…
Sweet friends, I am so excited about today's vintage secretary makeover! Before I get right to it, today is also Furniture Fixer Upper day where my friends are also sharing trashy furniture makeovers, so be sure to look for links to their projects at the bottom. I describe this piece in its before state as
Easy tips for a secretary desk makeover. Transform an old-fashioned secretary desk with paint and new hardware for a modern look.
Be inspired by this secretary desk makeover! Secretaries are often overlooked gems, but you won't look at them the same after you see this!
This dated desk was transformed using the new Silk paint line in a gorgeous true black, Anchor! The newly shined hardware sets it off and wait until you see the interior!
Let's get social
This simple beautiful secretary closes up to conceal your office workstation. Paint it a fun color for added pizazz and to make bill paying and mail sorting more glamorous. Special thanks to our readers for sharing their photos.
Buy the best Small Secretary Desks selected and recommended by interior designers.
Hide your clutter and organize your home office in SECONDS with this small space solution.Guard your office from prying eyes and flying toys.Great for command centers,dorms,and apartments.
Secretary Desk Makeover w/ Duck Egg Blue & 3 Different Colored Waxes for depth and dimension! (Chalk Paint® by Annie Sloan)
Secretary Desk Furniture Makeover - Since this piece already had that rustic, primitive look, milk paint was the obvious choice for me. See it transform here
Hide your clutter and organize your home office in SECONDS with this small space solution.Guard your office from prying eyes and flying toys.Great for command centers,dorms,and apartments.
Painted Secretary Desk
Free DIY Walk-throughs, building plans, and other crafty discussions!
