I am more than just a pilot!WAC-47 WAC-47 was a modified DUM-series pit droid who served the Galactic Republic during the Clone Wars. He was a part of D-Squad along with several other droids on an important mission, serving under Colonel Meebur Gascon and piloting his ship. WAC-47 was programmed as a pilot, but felt he was capable of more. He repeatedly referred to Gascon by the incorrect rank of Corporal, apparently as a part of a "program glitch." He did not get along well with Gascon at first
Attached: 1 image The robot from "Star Wars Jedi : Fallen Order" looks like it should run on four D cell batteries and play specially mastered cassette tapes.
Tim Bergholz has recently shared a two-part video guide to setting up a nice-looking droid from Star Wars.
The SD-K4 assassin droid, also referred to as the Assassin Probe was a model of assassin droid that was used to infiltrate and eliminate enemies with ease. In addition to its sharp pincers, each SD-K4 droid was equipped to dispense large amounts of small assassin droids called Probe Killers, but only if the droid was destroyed. They were manufactured by the Techno Union during the Clone Wars and used by Death Watch in an attempt to assassinate Mandalorian leader, Satine Kryze. Years after this,
Spacebobs Droids now has opened its Droid Division Workshop to bring you a super detailed and solid state Movie Styled Pit Droid. The Pit Droid STL files include everything you need to print the whole Droid including an information sheet and general printing tips to help you with the build. The Files as of Nov 2023 have been overhauled for much Greater Accuracy! Easier Printing! And much Less Supports! Whoot! The New PD-23 version has both Episode one, and alt Mando Show version details included so you can print any version you like.. There is a sweet printable, and light-able stand included along with many, many bonus files. There are also quite a few nice Animatronic/servo ready options if you are good at that sort of clever business. Older files are still included in case you need to update an already printed part, make custom versions or just want the older design. Listing pics show both versions, the older 2019 version, and the New PD-23 version. Listing is NOT a physical item/prop, but it is, FILES for 3D PRINTING at home. As files cannot be returned to me... I cannot refund money anymore unfortunately, be very sure of this before buying. Important! This is the only place I sell my DroidDivision (Spacebobs) 3D files and they take me a very long time to make. If you see another Etsy Shop offering fake DroidDivision (or Spacebobs) files, they are pretending to be me! and scamming me lol. There will be no support at all if you buy those useless files, please only buy from me here directly. As with all DD 3D files they are single person usage and not to be shared or sold, even if (especially if lol) modified. It can be filled and finished to your own standard but even looks great printed at 0.3 layer height and left with the layer lines as it’s a robot. He is a fully articulated little droid, and makes a great Guitar stand :) The files also include... There are pre split versions of the Head and any other larger parts to fit on smaller printer like the Ender3 (and now even the Prusa Mini as well) as a full versions for larger printers... In the Info PDF is a list of ideal hardware to make droid as in the accompanying photos as well as an alternative list for other hardware choices... A bonus optional wrench and a "zapper" tools files. Once properly assembled the droid is perfectly stable and requires no assistance to stand. He stands at 1.2 m to the top of his antenna and should use between 3 and 4 KGs of filament depending on settings. Check this great DD Pit Droid Build that will answer quite a few of your questions about the build https://youtu.be/h5ei9-fv4ug File downloaded will simply be a pdf (which you should save to get access to any future updates) with an introduction to the build which contains a link to the Pit Droids most *updated STL and Information Dropbox Files. Check the DroidDivision PrintClub Builders Group to get building tips and to see others building my Droids, now with over 13,000 members... https://www.facebook.com/groups/2505708886350784/ I have a very simple Patreon for those that can afford it and that think my files are a bit to cheap... patreon.com/droiddivision And also check his great Tee https://teespring.com/droid-division-2?tsmac= I do not sell printed versions of my Droids, just the files I'm afraid. Try Twano Designs https://www.etsy.com/uk/listing/879700883/star-wars-pit-droid-posable?ga_order= Or Patrick Zapata on FB :) https://www.facebook.com/patrickzap Or JartogsArmory :) https://www.etsy.com/uk/listing/754187786/pit-droid?ref=shop_home_active_8
The AZ-series surgical assistant droid was a model of medical droid manufactured by Cybot Galactica and utilized during the Clone Wars. One such droid, AZI-3, served the Kaminoans in Tipoca City on the planet Kamino, caring for clones. AZ-model droids were capable of low-elevation hovering using a pair of repulsorlifts in place of legs. Two circular photoreceptors were on the front of the head. Their primary arms had three digits each, however with the compartment on its back, the medical droid
Spacebobs Droids has once again opened its Droid Division Workshop to bring you a super detailed and solid state ID-10 Seeker and bonus Prowler Probe Droids set. Listing is NOT a physical item/prop, but it is, FILES for 3D PRINTING at home. As files cannot be returned to me... I cannot refund money anymore unfortunately, be very sure of this before buying. The Droid STL files include everything you need to print the BOTH Droids including a printable Stand, and Wall Mounts! AND you will be able to mix and match Heads and Legs from one to the other to make new custom Seekers-Prowlers. As with all DD 3D files they are single person usage and not to be shared or sold, even if (especially if lol) modified. Make sure you save your original Link PDF from Etsy so you can re-access the Dropbox folders at a later date if needed. The Heads feature voids for lighting and channels for wires and such to all of the many light positions. It can be filled and finished to your own standard but even looks great printed at 0.3 layer height and left with the layer lines as it’s a robot. The files also include a PDF with instructions and pictures on how to complete the build and a short list of hardwares needed to make the Droids... He stands at about 550mm tall over all including the stand. The whole thing is in parts easily printable on an on a smaller printer like the Ender 3 and also has versions sliced for a bigger printer like the CR-10 and the Ender5+ File downloaded will simply be a PDF with an introduction to the build which contains a link to the Droids most updated STL and Information Dropbox Files. Thank you and Happy Printing
Star Wars Universe - L'univers de Star Wars est désormais à votre portée
Spacebobs Droids has once again opened its Droid Division Workshop to bring you a super detailed and solid state ID-10 Seeker and bonus Prowler Probe Droids set. Listing is NOT a physical item/prop, but it is, FILES for 3D PRINTING at home. As files cannot be returned to me... I cannot refund money anymore unfortunately, be very sure of this before buying. The Droid STL files include everything you need to print the BOTH Droids including a printable Stand, and Wall Mounts! AND you will be able to mix and match Heads and Legs from one to the other to make new custom Seekers-Prowlers. As with all DD 3D files they are single person usage and not to be shared or sold, even if (especially if lol) modified. Make sure you save your original Link PDF from Etsy so you can re-access the Dropbox folders at a later date if needed. The Heads feature voids for lighting and channels for wires and such to all of the many light positions. It can be filled and finished to your own standard but even looks great printed at 0.3 layer height and left with the layer lines as it’s a robot. The files also include a PDF with instructions and pictures on how to complete the build and a short list of hardwares needed to make the Droids... He stands at about 550mm tall over all including the stand. The whole thing is in parts easily printable on an on a smaller printer like the Ender 3 and also has versions sliced for a bigger printer like the CR-10 and the Ender5+ File downloaded will simply be a PDF with an introduction to the build which contains a link to the Droids most updated STL and Information Dropbox Files. Thank you and Happy Printing
The Droid by Dariusz Zawadzki 31,5” x 86,6” (80x220cm) 230kg solid steel
The super tactical droid was a model of tactical droid used by the Confederacy of Independent Systems as a battle droid commander during the Clone Wars. Super tactical droids often served as generals in the Separatist Droid Army. Super tactical droids were created for the Separatist Alliance in the Clone Wars to address shortcomings in the T-series tactical droid and to serve Count Dooku implicitly, much like most other droids in the Separatist Alliance They stood 1.94 meters tall and were progr
This is a collection of the droids in the mod. Im adding the incinerator and carbonite war droid from force unleashed 2 just since they just seem like they go with the set dont they.
Spacebobs Droids now has opened its Droid Division Workshop to bring you a super detailed and solid state Movie Styled Pit Droid. The Pit Droid STL files include everything you need to print the whole Droid including an information sheet and general printing tips to help you with the build. The Files as of Nov 2023 have been overhauled for much Greater Accuracy! Easier Printing! And much Less Supports! Whoot! The New PD-23 version has both Episode one, and alt Mando Show version details included so you can print any version you like.. There is a sweet printable, and light-able stand included along with many, many bonus files. There are also quite a few nice Animatronic/servo ready options if you are good at that sort of clever business. Older files are still included in case you need to update an already printed part, make custom versions or just want the older design. Listing pics show both versions, the older 2019 version, and the New PD-23 version. Listing is NOT a physical item/prop, but it is, FILES for 3D PRINTING at home. As files cannot be returned to me... I cannot refund money anymore unfortunately, be very sure of this before buying. Important! This is the only place I sell my DroidDivision (Spacebobs) 3D files and they take me a very long time to make. If you see another Etsy Shop offering fake DroidDivision (or Spacebobs) files, they are pretending to be me! and scamming me lol. There will be no support at all if you buy those useless files, please only buy from me here directly. As with all DD 3D files they are single person usage and not to be shared or sold, even if (especially if lol) modified. It can be filled and finished to your own standard but even looks great printed at 0.3 layer height and left with the layer lines as it’s a robot. He is a fully articulated little droid, and makes a great Guitar stand :) The files also include... There are pre split versions of the Head and any other larger parts to fit on smaller printer like the Ender3 (and now even the Prusa Mini as well) as a full versions for larger printers... In the Info PDF is a list of ideal hardware to make droid as in the accompanying photos as well as an alternative list for other hardware choices... A bonus optional wrench and a "zapper" tools files. Once properly assembled the droid is perfectly stable and requires no assistance to stand. He stands at 1.2 m to the top of his antenna and should use between 3 and 4 KGs of filament depending on settings. Check this great DD Pit Droid Build that will answer quite a few of your questions about the build https://youtu.be/h5ei9-fv4ug File downloaded will simply be a pdf (which you should save to get access to any future updates) with an introduction to the build which contains a link to the Pit Droids most *updated STL and Information Dropbox Files. Check the DroidDivision PrintClub Builders Group to get building tips and to see others building my Droids, now with over 13,000 members... https://www.facebook.com/groups/2505708886350784/ I have a very simple Patreon for those that can afford it and that think my files are a bit to cheap... patreon.com/droiddivision And also check his great Tee https://teespring.com/droid-division-2?tsmac= I do not sell printed versions of my Droids, just the files I'm afraid. Try Twano Designs https://www.etsy.com/uk/listing/879700883/star-wars-pit-droid-posable?ga_order= Or Patrick Zapata on FB :) https://www.facebook.com/patrickzap Or JartogsArmory :) https://www.etsy.com/uk/listing/754187786/pit-droid?ref=shop_home_active_8
Careers for Star Wars Traveller are relatively the same as they are for standard, classic Traveller as noted in my previous post. Okay, actually they're the same as MegaTraveller, since that's the assortment of core Careers my group, and I use. Practically all of the Careers in Traveller are valid, fitting quite easily into the Star Wars universe, so no adjustments are needed for most of them. Hive of scum and villainy or... Career Day Meetup in today's challenging galactic job market? We will not be using any advanced Careers for this, nor any advanced character generation rules. The following MegaTraveller Careers transfer over to Star Wars Traveller as is: Army Barbarian Diplomat Doctor Hunter Law Enforcer Marine Navy Noble Pirate Sailor Scientist Scout Rather then make unnecessary changes to these Careers mechanically, or even aesthetically, it is how you represent them in the setting that matters. In other words, if you make a character with two Terms of Army, and one of Scout that could mean she is a Resistance Commando, a First Order Scout Trooper, or an independent mercenary type. Barbarian is fun in the Star Wars universe, as it can easily be used to present any being from a primitive culture, or simply from a backwater planet like Tatooine, or perhaps Jakku. I guess I could have changed the name to Tough Native (which is what it is called in Star Wars D6), but that seems a superfluous choice. These next ones will have a name change: Bureaucrat becomes Administrator Flyer becomes Operator Rogue becomes Scoundrel The main reason for these is atmosphere, and feel of the milieu, but also because of what the Careers do, and who the people are who do these things in the Star Wars universe. I know a number of people over the years who chose Flyer as a Career when what they really wanted was a Wedge Antilles, or Poe Dameron type Starfighter Pilot. Unfortunately, Flyer doesn't necessarily create great pilots, and rarely space capable ones. Flyer is a Career aimed at aircraft, not spacecraft, and more often than not hands the PC options for operating a variety of other vehicles. This is better suited for a Operator, who might 'operate' an AT-AT Walker, a Sail Barge, or fly a Snowspeeder across the icy plains of Hoth. Now, there are also a small batch of new Careers I'll be adding to the mix. If you take a close look at the core list above, you'll notice some Careers missing. Merchant is removed in favor of Smuggler, which is a better fit, and probably what most of us thought we were playing when we chose Merchant in the first place. Belter is removed (for now), and the Vargr (Wolf/Dog alien species in Traveller) Career of Scavenger (originally listed in the Vargr supplement) is now a mainstay. Not only is this a good fit for a character like Rey, but it also covers scavenging, and prospecting characters such as Tatooine's Jawas. The complete list of new Careers is: Bounty Hunter Scavenger Smuggler Star Pilot Technician Technician is a funny one. Most Science Fiction/Space Opera games have some sort of Engineer, or Mechanic profession since, hey, there is advanced machinery EVERYWHERE! Somehow Traveller missed this very obvious fact, and classic versions of the game do not include a dedicated tech Career. I decided to include it in Star Wars Traveller because although at first glance none of the main characters are engineers per se, many of them could be considered to have Technician as one of their two careers. Chewbacca definitely qualifies as a Technician, with perhaps a term, or two of Smuggler thrown in. Rey could easily be defined as a Scavenger/Technician. Then there are the truly dedicated Technicians, R2-D2, BB-8, and other Astromech Droids. I've had people play droids in my Star Wars D6 games over the years, and I want the opportunity to be available here (especially since I am totally in love with BB-8. OMG it's so ADORABLE! Ahem). Of course, this brings up a whole other issue of droid Player Characters...but we'll get to that much later in the month. Astromechs Don't leave your home base without them. For now, I think we have the basics. I just need to give you all the tables for the new Careers, the Event table ideas, the new Mustering Out benefits, how The Force works... Wow. There is more to this than I thought. Oh well. Let's get to work... AD Barking Alien
The 0-LT utility droid was a model of utility droid in use during the war between the First Order and the Resistance. The droids were equipped with treaded foot pads and repurposed domes from obsolete astromech droid models. Star Wars: Episode IX The Rise of Skywalker (First appearance) Star Wars: The Rise of Skywalker: The Visual Dictionary (First identified as 0-LT utility droid)
Spacebobs Droids is very proud to once again open its Droid Division Workshop to bring you a super detailed and solid state Bug Droid STL file set. Listing is NOT a physical item/prop, but it is, FILES for 3D PRINTING at home. As files cannot be returned to me... I cannot refund money anymore unfortunately, be very sure of this before buying. IMPORTANT! This file set was always intended as, and comes as a Free/Bonus file set included with the Movie Styled Pit Droid, BattleDroid, Rat Catcher, IG Head, K2 Head and the DRK-1 file sets, so if you already have bought any of those, just re-download it and files will be included so don't buy this lol This file set is for all the people who specifically asked for a stand alone listing, who have not bought from me before and just want the Bug Droid on its own. The Bug Droid STL files include everything you need to print the whole Droid including, an Information Sheet and a General Printing Tips PDFs to help you with the build. As with all DD 3D files they are single person usage and not to be shared or sold, even if (especially if lol) modified. It can be filled and finished to your own standard but even looks great printed at 0.3 layer height and left with the layer lines as it’s a robot. He is a some what poseable, Droid but some articulations are limited and cooked in. There is space to add lights to the lenses if you like . This file set is really quite simple and very easy to print and make. It can be simply glued together as a sturdy "toy" or it can be posed flying on it's sturdy stand, or on it's not so sturdy Legs Wings are not poseable as such but can be displayed open, or closed by leaving off the hinge part... Massively important July 2022 update! Files now come with another link to add automation to the wings, lights and sounds if you would like to try such wizardry! A full information sheet with a list of all servos and parts is included! All parts print easily on an small printers including the Prusa Mini It will use less than 300grams of filament and print without supports. It is very much advised that you keep the Etsy link saved safe. File downloaded will simply be a PDF with an introduction to the build which contains a link to the Droids most updated STL and Information Dropbox Files. Post Progress in the DroidDivision PrintClub Group https://www.facebook.com/groups/2505708886350784 And check out the Instagram page :) https://www.instagram.com/droiddivision/ Thank you :)
This DUM-series pit droid was present on the planet of Balnab with at least three other pit droids during the Clone Wars. Star Wars: The Clone Wars — "Nomad Droids" (First appearance)
Spacebobs Droids now has opened its Droid Division Workshop to bring you a super detailed and solid state Movie Styled Pit Droid. The Pit Droid STL files include everything you need to print the whole Droid including an information sheet and general printing tips to help you with the build. The Files as of Nov 2023 have been overhauled for much Greater Accuracy! Easier Printing! And much Less Supports! Whoot! The New PD-23 version has both Episode one, and alt Mando Show version details included so you can print any version you like.. There is a sweet printable, and light-able stand included along with many, many bonus files. There are also quite a few nice Animatronic/servo ready options if you are good at that sort of clever business. Older files are still included in case you need to update an already printed part, make custom versions or just want the older design. Listing pics show both versions, the older 2019 version, and the New PD-23 version. Listing is NOT a physical item/prop, but it is, FILES for 3D PRINTING at home. As files cannot be returned to me... I cannot refund money anymore unfortunately, be very sure of this before buying. Important! This is the only place I sell my DroidDivision (Spacebobs) 3D files and they take me a very long time to make. If you see another Etsy Shop offering fake DroidDivision (or Spacebobs) files, they are pretending to be me! and scamming me lol. There will be no support at all if you buy those useless files, please only buy from me here directly. As with all DD 3D files they are single person usage and not to be shared or sold, even if (especially if lol) modified. It can be filled and finished to your own standard but even looks great printed at 0.3 layer height and left with the layer lines as it’s a robot. He is a fully articulated little droid, and makes a great Guitar stand :) The files also include... There are pre split versions of the Head and any other larger parts to fit on smaller printer like the Ender3 (and now even the Prusa Mini as well) as a full versions for larger printers... In the Info PDF is a list of ideal hardware to make droid as in the accompanying photos as well as an alternative list for other hardware choices... A bonus optional wrench and a "zapper" tools files. Once properly assembled the droid is perfectly stable and requires no assistance to stand. He stands at 1.2 m to the top of his antenna and should use between 3 and 4 KGs of filament depending on settings. Check this great DD Pit Droid Build that will answer quite a few of your questions about the build https://youtu.be/h5ei9-fv4ug File downloaded will simply be a pdf (which you should save to get access to any future updates) with an introduction to the build which contains a link to the Pit Droids most *updated STL and Information Dropbox Files. Check the DroidDivision PrintClub Builders Group to get building tips and to see others building my Droids, now with over 13,000 members... https://www.facebook.com/groups/2505708886350784/ I have a very simple Patreon for those that can afford it and that think my files are a bit to cheap... patreon.com/droiddivision And also check his great Tee https://teespring.com/droid-division-2?tsmac= I do not sell printed versions of my Droids, just the files I'm afraid. Try Twano Designs https://www.etsy.com/uk/listing/879700883/star-wars-pit-droid-posable?ga_order= Or Patrick Zapata on FB :) https://www.facebook.com/patrickzap Or JartogsArmory :) https://www.etsy.com/uk/listing/754187786/pit-droid?ref=shop_home_active_8
Don't let the nickname fool you; the B2-series battle droid wasn't really all that super. Sure, they had a level of strength and durability that a B1 could only dream about, but they were slow and clumsy, and they barely had enough processing power to aim their weapons in the right direction.R0-GR, battle droid veteran B2-series super battle droids,[21] also known as B2 super battle droids, super battle droids,[22] or super droids,[23] were an advanced[24] battle droid used by the Confederacy of
Model: Risant Model 2 Battle Droid Height: 1.91 meters Design Philosophy: The RM-2 battle droid is a remake of the old Separatist B1’s used during the Clone Wars of the Old Republic. The RM-2 features four arms with the upper two being dedicated to...