A new study undertaken at the University of Haifa has, for the first time, found a connection between PD and the ECM in the brain.
Gestionnaire de connexion Delo (ECM1001UK).
The ECM Technika V Profi PID is a flexible heat exchanger espresso machine with the ability to switch between water tank and water line connection.
Here is the CarProg programmer for OPEL cars 2003-2009 by OBDII (CAN bus). Also for some ECU you can read/write internal EEPROM. Works by OBDII connector using
The combine station is designed for boilers with a single radiant zone.Radiant mixing zone with the radiant zone pumpLoad valve keeps a minimum of 130°F - 55°C inlet temperatureGrundfos High-Efficiency Pump with ECM technologyHigh-temperature baseboard, radiator or fancoil connectionsThermal storage connectionsRequired by most manufacturers to keep a valid warrantyMade for 220V 60Hz installationConnections: 1" FPTWater for the heating system is mixed in a 3-way mixing valve with electronic control. Return water temperature to the boiler is kept at the min. The temperature of 55°C by the load valve. Boiler heat surplus is stored in a thermal store or a high-temperature zone such as a radiator, baseboard or fancoil. The heating output is controlled by an external controller through the actuated mixing valve.Made in Europe
1951-52 Chevy Car Package Vintage Series 4 5/8\" Speedometer And Quad (Fuel 0-30 OHM) with Stainless Low Step Bezel Flat Glass Lens. The package includes model specific trim rings and mounting brackets with green LED turn signals and red high beam indicator light. All necessary sending units are included. The Vintage Package for 1951-1952 Chevy Cars Available with FD, GM, LS, or MP Sending Units Built-in ECM signal filter switch, on-board filter switch to allow direct connections to ECM speed signals, no additional control boxes needed LED lighting with built-in dimmer, turn signals, high beam, and additional warning indicator Glass lens included Single-connector wiring harness for quicker setup Arrives ready to install in existing bezel, bezel not included
Corkboard Connections is a blog written by Laura Candler who enjoys connecting terrific teachers with amazing resources!
The initial musical connection between saxophonist Mark Turner and pianist Ethan Iverson was made in 1990s jam sessions in New York City, with both going on to individual success Iverson in hit trio The Bad Plus and Turner as a solo leader and in such groups as the trio Fly (recording in both capacities for ECM). A decade after their first meeting, the saxophonist and pianist began an association in the Billy Hart Quartet, the two players featuring sympathetically on two widely lauded ECM albums by that band. Now with Temporary Kings, their debut on record as a duo, Turner and Iverson explore aesthetic common ground that encompasses the cool-toned intricacies of the Lennie Tristano/Warne Marsh school, as well as the heightened intimacy of modernist chamber music. The album presents six originals by Iverson (such as the nostalgic solo tune Yesterdays Bouquet) and two by Turner (including Myrons World, which has acquired near-classic status among contemporary jazz players). Theres an off-kilter blues (Unclaimed Freight) and a strikingly melodic, almost Ravelian opening track dedicated to the Swiss town where the album was recorded (Lugano), plus an interpretation of Marshs playfully serpentine Dixies Dilemma.
Real GTE Stage 1 Performance Chip In-Depth Analysis and Review. Product Teardown, PCB, IC and Components Complete Analysis, Dyno Test & Installation
Features with all optional accessories: Six Sequencer Timing Sections, 1, 3, or 6 Second Intervals Six Independent ECM Connections Six Independent Contact Closures Front Panel Digital AC Mains Voltage and Current Meter External Switch Sequence Trigger Activation External DCV Sequence Trigger Activation 5-24VDC Abnormal AC Line Voltage Indicator Front & Rear XLR Connector for 12VDC Gooseneck LED Lamp (AP-GNL18) The ECS-6RM modular system has been designed to meet most installation requirements for AC power distribution, equipment power conditioning and surge suppression protection. The compact 1 RU unit features six sequential timing sections that can be activated via the unit, or remotely. Up to three ECS-6RM units can be daisy chained together with independent trigger timing settings giving you a total of 18 sequence triggered outlets. The ECS-6RM unit is the activation controller/monitor portion of the system and requires a 120V AC Mains ECM (Electrical Controlled Module) module for each triggered output. The ECS-6RM can also monitor up to six independent 20A AC main lines, both voltage and current readings can be viewed via the laboratory grade meters on the front panel. The ECS-6RM has built in intelligence that monitors the AC lines and will inform you of potentially damaging voltages. The ECS-6RM also features 6 sequenced independent relay contacts. The activation of the contacts work in parallel of the corresponding ECM triggered outputs. Activation can be done via the Front panel momentary switch, RMT V input (5-24VDC), External switch, or via the optional Remote ECS-KSW6 key switch. The ECS-KSW6 can be placed up to 1000 ft away from the ECS-6RM and will also indicate if an ECM is activated or if a fault condition has occurred on one or all six channels.
Here is the CarProg programmer for OPEL cars 2003-2009 by OBDII (CAN bus). Also for some ECU you can read/write internal EEPROM. Works by OBDII connector using
This set of scribble notes for chemistry contains all you need for notes on matter, elements, compounds, and mixtures. Students can color, scribble, and make visual connections as they take notes in class. This set of scribble notes is designed for use during a unit on matter and measurement in chemistry. States of matter are compared. Elements, compounds, and mixtures are diagrammed. The matter & ECM scribble notes come in two versions: Version 1 is more blank, with students needing to write in their notes during the lesson. Version 2 is more structured, with more of the notes included and/or fill in the blank notes for the students to complete during the lesson. Also included are 2 TEACHER GOOGLE SLIDES PRESENTATIONS. Version 1 is more blank for those teachers that write on their boards/screens. This could be done with a Smartboard, tablet, etc. Personally, I use the Doceri app in conjunction with an iPad and my desktop to write on my presentations from anywhere in my room. Version 2 is more complete with more filled in and more text for those teachers that will be using a pointer/clicker to click through the slides. Each teacher slide presentation also includes "which doesn't belong?" slides for students to practice, as well as partner turn-and-talk slides with timers for students to discuss content. There are 10 Show-Me slides at the end for you to use with whiteboards or some other response system. I included a task card activity at the end. You can make your own cards, or if you do not have time, can purchase a set here. Lastly, each presentation includes the Color Palette and font that I used on a slide at the end of the presentation in case you want to add any slides. Please view all preview images and read this description carefully to see what is included in this resource. You may also like: Elements, Compounds, and Mixtures Task Cards Measurement Scribble Notes Graduated Cylinder Measurement Write the Room Activity Measurement Sig Fig SI Unit Task Card Set Terms of Use This resource is for individual classroom use only. This product is to be used by the original purchaser of the resource. It is prohibited to copy the resource for another teacher, classroom, or school without the purchase of additional license purchases. Files may be partially or fully non-editable to protect images and other components that are copyrighted. Thanks for understanding! Like this product? Please help my store grow by leaving a review, and earn credit towards future TpT purchases. If you have any questions or feedback, please send me an email at [email protected] or ask a question here on TpT. Join my email list and receive four self-checking ideas, along with four FREE self-checking products and/or templates. Let's connect on Instagram.
Vanne ANNOVI REVERBERI AR1312
DryConn 25-Pack Plastic Wing Wire Connectors Ecm-King Dryconn 25-Pack Plastic Wing Wire Connectors 62127 - Reno-Depot
Meet the great Technika V Profi PID Espresso Machine with the classic timeless design with a stainless steel body, E61 Group-head, Stainless steel Heat-Exchanger boiler, quiet rotary pump and a digital PID control! PID display for the individual adjustment of the boiler temperature and the display of the brewing time for your espresso The outer panels are made of stainless still with a shiny mirror look and the internal frame is made of metal which makes it build to last. High-end ECM E61 brew group with innovative stainless steel bell, premium-quality stainless steel boiler. More features: Professional quick steam- and hot water valve with a new look Larger gauges Quiet rotary pump Switchable from water tank to a fixed water connection 2 ergonomically angled ECM portafilters with weight-balanced shape Specifications: Manufacturer: ECMModel: Technika V Profi PIDSKU: Technika-V-GrintaGTIN: 692264414916Dimensions: W 325 x D 475 x H 390mmWeight: 28KgWatts: 1200WVoltage: 220V 50HzBoiler Type: Heat-Exchanger boiler made of stainless steel. Boiler Capacity: 2.1 Liters Temperature Control: digital PID controllerWater Tank: 3.0 Liters Water Source: Reservoir /Main water direct connection. Pump: Rotary pumpHousing material: Stainless steel Frame material: Steel Accessories: Single and Double Portafilter, Blind Basket, Detailed Manual.User manual: Check the user manual here (English / German). Nuova Simonelli Grinta Grinder: Manufacture: Nuova SimonelliModel: GrintaColor: Black Width: 14cmDepth: 21cmHeight: 42cmBlades: 50mmWeight: 4KgWatts: 220WVolts: 220VCase Material: Plastic Note: we cannot ship Nuova Simonelli brand products to USA & Canada.
Sony ECM-S1 Wireless Streaming Microphone Compact, lightweight wireless streaming microphone With both wireless and wired connections available, the ECM-S1 portable streaming microphone is a compact and lightweight high-performance unit that provides clear, low-noise, minimum audio delay, high-quality audio for easy recording or live-streaming either indoors or outdoors. High-quality microphone capsules for clear voice recording Despite its compactness and light weight, the ECM-S1 is equipped with three large-diameter (14 mm) microphone capsules that provide clear, high-quality sound recording with a flat frequency response, particularly in the low-mid-range voice band, while suppressing noise. Great sound quality makes a huge contribution to the overall impression made on viewers by well-produced video. Low intrinsic noise levels deliver clear sound The low intrinsic noise and wide dynamic range of the microphone allow clear capture of even low-level sound. Designed for streaming, the microphone is tuned particularly to capture the rich textures of the human voice near the mouth clearly and naturally. Directivity selectable to suit the scene Three directional sound capture modes are provided: Uni-directional, Omni-directional, and Stereo. A switch on the side of the microphone allows the user to select the appropriate directivity for the current scene or usage situation. Noise-suppressing filter functions A digital noise cut filter removes persistent background noise, and a low cut filter on the microphone side reduces unwanted low-frequency sound from wind, air conditioning, and vibration. Less noise reduction is needed post-production, improving workflow efficiency. Pop guard to suppress popping noise A pop guard is included to prevent the annoying popping sounds that can occur due to vocal plosives when the microphone is placed close to the speaker's mouth, allowing vocals, narration, and other audio to be recorded under optimal conditions. Compact, lightweight body design The ECM-S1 comprises compact and lightweight1 microphone / transmitter and receiver units that provide excellent functionality with high digital sound quality. It can be used in a wide variety of environments, both indoors and outdoors with a camera. Operability for real-time confirmation and adjustment An independent AUDIO LEVEL dial allows real-time adjustment of the audio input level with the upper dial. In addition, the connection status between the microphone and receiver can be checked with the LINK lamp. Suitable for long hours of outdoor shooting The receiver and microphone each have built-in batteries. The receiver can be used continuously with direct power supply when connected to the camera's Multi Interface (MI) Shoe2 or to a PC or other device3. The microphone can be used continuously for about 13 hours when fully charged. The microphone can be used for long periods of time without worrying about the battery. Improved flexibility in audio recording through wireless transmission Bluetooth 5.3 (Bluetooth Low Energy) and a LC3plus4 codec provide low power consumption, low latency, and high sound quality. Communication is possible at up to 492 ft (150 m) when there is a good line of sight, for flexibility in outdoor microphone placement. Supports a variety of mounting and attachment methods The microphone can be attached to a stand6 during recording, and the angle of the microphone can be adjusted back and forth. Alternatively, the 1/4″ thread on the bottom of the microphone can be used to mount the microphone on a tripod, or a conversion adaptor can be used to attach the microphone to a boom arm. Multi Interface (MI) Shoe for minimal audio delay and cable-less power supply Connecting the receiver to a camera8 from Sony that supports the Multi Interface (MI) Shoe, such as one of the α™ series digital interchangeable-lens cameras or vlog cameras, eliminates the need for a separate cable to supply power or to provide the audio interface. Wireless sound recording in conjunction with a camera By connecting the receiver to a camera from Sony that supports the Multi Interface (MI) Shoe with a digital audio interface, high-quality audio can be captured and transmitted digitally without degradation, with the wireless connection allowing maximum shooting freedom. Technical Specifications Kit Content 1 Description Microphone (transmitter) Dimension (approx.) W 63.0 mm x H 137.5 mm x D 63.0 mm (2 1/2 inches x 5 1/2 inches x 2 1/2 inches) Weight (Approx.) 157 g (5.6 oz) Kit Content 2 Description Receiver Dimension (approx.) W 32.0 mm x H 29.0 mm x D 50.0 mm (1 5/16 inches x 1 3/16 inches x 2 inches) Weight (Approx.) 25 g (0.9 oz) Supplied Accessory Name / Model (Count) Pop Guard (1), Connector Protect, Holder/Stand (1), Pouch (1), Stand (1) Warranty Provided Microphone Compatibility Compatible Cameras ILME-FX3, ILME-FX30, ILME-FX30B, ILCE-6700, ILCE-6700L, ILCE-6700M, ILCE-7CM2, ILCE-7CM2L, ILCE-7CR, ILCE-7RM5, ZV-E1, ZV-E1L, ILCE-7M4, ILCE-7M4K, ILCE-7RM4A, ZV-E10, ZV-E10L, ILCE-1, ILCE-7C, ILCE-7CL, ILCE-7SM3, ILCE-9M2, ILCE-7RM4 Microphone Specification Operating Temperature 0-deg C to +40-deg C (+32 °F to +104 °F) Microphone Channel Audio Output 2ch Shoe type Multi Interface Shoe Power Supply from Main Unit Multi Interface Shoe Battery Type Built-in lithium-ion battery Number of Battery Required 1 Type Back Electret Condenser Microphone Monaural / Stereo Monaural / Stereo Directivity monoural uni-directional / monoural omni-directional / stereo uni-directional Frequency Response 20 Hz to 20 000 Hz Front sensitivity -20 dBFS (0.1 Pa, 1 kHz)* * Acquired while "8" is selected by the AUDIO LEVEL dial. Intrinsic noise 19 dB SPL or less (0 dB = 2×10⁻⁵ Pa)* * Acquired while "8" is selected by the AUDIO LEVEL dial. * Acquired while "Monaural, Uni-directional" is selected by the directivity selection switch and "LC" is selected by the filter switch. * Acquired while "DIGITAL" is selected by the slide switch. Maximum Input Sound Pressure Level 120 dB SPL* * Equivalent sound pressure level value converted from the input level value that is acquired when 1% waveform distortion is produced by 1 kHz output signals from the microphone. (0 dB = 2×10⁻⁵ Pa) * Acquired while "8" is selected by the AUDIO LEVEL dial. Microphone out jack Yes (3.5 mm mini jack (stereo)) Headphone out jack Yes (3.5 mm mini jack (stereo)) USB Type-C® Terminal Yes Package Form Color carton Hook Attachment Yes
Here is the CarProg programmer for OPEL cars 2003-2009 by OBDII (CAN bus). Also for some ECU you can read/write internal EEPROM. Works by OBDII connector using
Increased Power and Performance: SCORCHER HD performance chips deliver significant power gains by increasing turbo boost as well as optimizing fuel injection timing and pulse width. Unlike many other chips on the market that “flash” the ECM, our performance chips receive data from the ECM and alter signals appropriately.Easy Installation: After removal of the vehicle’s ECM, the installation is a breeze. Remove the cover to find the ECM port connections, clean the ports, then simply slide the chip into the ECM. No cutting, splicing, or modifications of wiring is necessary.Six Power Settings: A knob can be mounted in the cabin for easy, on-the-fly adjustability to accommodate any driving situation. The six settings are:StockHigh-Idle: Used to reduce wet-stacking leading to excessive engine wear+50 Horsepower+75 Horsepower+100 Horsepower“HOT” (up to +133 Horsepower)Fitment Note: This part number works with ECM DPC-462 code and supports the following box codes: BXE, KEK, NWM, PBY, PRW, TMA, VDH, VDU and QLI.Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. 02-03 Ford Diesel Trucks V8-7.3L (td) Automatic.
Height 4.37 Length 1.25 Width 2.75 Hazardous Material No ECCN EAR99 Country Origin Code US
FREE SHIPPING AUSTRALA WIDE Introducing the ECM Synchronika V3 An espresso machine crafted for the discerning home barista who demands excellence in every cup. This dual boiler marvel combines exquisite design with cutting-edge technology to elevate your coffee experience to new heights. At the heart of the ECM Synchro
Classic Instruments Gauge SetBE01T-LS Fuel Sending unit not included Dash bezel not included (uses original dash bezel);Classic Instruments Bel Era Package Tan;The Bel Era Tan 6-in-One Package for 1955-1956 Chevys. LS Sending Units;Bel Era Tan 6-in-One Package works directly with ECM or VSS signal, no additional control boxes are needed....
The combine station is designed for boilers with a single radiant zone.Radiant mixing zone with the radiant zone pumpLoad valve keeps a minimum of 130°F - 55°C inlet temperatureGrundfos High-Efficiency Pump with ECM technologyHigh-temperature baseboard, radiator or fancoil connectionsThermal storage connectionsRequired by most manufacturers to keep a valid warrantyMade for 220V 60Hz installationConnections: 1" FPTWater for the heating system is mixed in a 3-way mixing valve with electronic control. Return water temperature to the boiler is kept at the min. The temperature of 55°C by the load valve. Boiler heat surplus is stored in a thermal store or a high-temperature zone such as a radiator, baseboard or fancoil. The heating output is controlled by an external controller through the actuated mixing valve.Made in Europe
Classic Instruments Gauge SetBET00W-LS Fuel Sending unit not included Dash bezel not included (uses original dash bezel);Classic Instruments Bel Era III White;The Bel Era III Direct-fit Package for 1955-1956 Chevys. LS Sending Units;The Bel Era III direct-fit package offers the perfect combination of all-electric technology and the nostalgic stock look...
Item specificsCondition
Evoko Le Delo Connection Manager est un hub de partage d'écran innovant qui intègre des fonctions de chargement, de gestion des câbles et de contrôle des équipements de la salle de conférence:-Une connexion fiable et rapide-Une connexion stable avec un flux vidéo fluide-Inf (ECM1001EU).
Suitable for all HVAC applications (2-110°C). Maintenance-free glandless circulation pump with screwed connection, motor with energy-saving ECM technology and built-in electronic power control for variable differential pressure control. For use with thermostatic radiator valve systems and underfloor heating systems.
DryConn 5-Pack Plastic Wing Wire Connectors Ecm-King Dryconn 5-Pack Plastic Wing Wire Connectors 62207 - Reno-Depot
Increased Power and Performance: SCORCHER HD performance chips deliver significant power gains by increasing turbo boost as well as optimizing fuel injection timing and pulse width. Unlike many other chips on the market that flash IN the ECM, our performance chips receive data from the ECM and alter signals appropriately.Easy Installation: After removal of the vehicles ECM, the installation is a breeze. Remove the cover to find the ECM port connections, clean the ports, then simply slide the chip into the ECM. No cutting, splicing, or modifications of wiring is necessary.Four Power Settings: A knob can be mounted in the cabin for easy, on-the-fly adjustability to accommodate any driving situation. The four settings are: +50 Horsepower, +75 Horsepower, +100 Horsepower, HOT IN (up to +140 Horsepower)Fitment Note: This part number works with ECM DPC-202 code and supports the following box codes: LKM, MIF, NAW, PRE, PRY, TDE, TEE, YBT and ZAA.This Part Fits: Year Make Model Submodel 1995-1996 Ford F-250 Eddie Bauer 1995-1996 Ford F-250 Special 1995-1996 Ford F-250 XL 1995-1996 Ford F-250 XLT 1997 Ford F-250 HD XL 1997 Ford F-250 HD XLT 1997 Ford F-350 Base 1995 Ford F-350 Eddie Bauer 1995-1996 Ford F-350 Special 1995-1997 Ford F-350 XL 1995-1997 Ford F-350 XLT
Sony ECM-S1 Wireless Streaming Microphone Compact, lightweight wireless streaming microphone With both wireless and wired connections available, the ECM-S1 portable streaming microphone is a compact and lightweight high-performance unit that provides clear, low-noise, minimum audio delay, high-quality audio for easy recording or live-streaming either indoors or outdoors. High-quality microphone capsules for clear voice recording Despite its compactness and light weight, the ECM-S1 is equipped with three large-diameter (14 mm) microphone capsules that provide clear, high-quality sound recording with a flat frequency response, particularly in the low-mid-range voice band, while suppressing noise. Great sound quality makes a huge contribution to the overall impression made on viewers by well-produced video. Low intrinsic noise levels deliver clear sound The low intrinsic noise and wide dynamic range of the microphone allow clear capture of even low-level sound. Designed for streaming, the microphone is tuned particularly to capture the rich textures of the human voice near the mouth clearly and naturally. Directivity selectable to suit the scene Three directional sound capture modes are provided: Uni-directional, Omni-directional, and Stereo. A switch on the side of the microphone allows the user to select the appropriate directivity for the current scene or usage situation. Noise-suppressing filter functions A digital noise cut filter removes persistent background noise, and a low cut filter on the microphone side reduces unwanted low-frequency sound from wind, air conditioning, and vibration. Less noise reduction is needed post-production, improving workflow efficiency. Pop guard to suppress popping noise A pop guard is included to prevent the annoying popping sounds that can occur due to vocal plosives when the microphone is placed close to the speaker's mouth, allowing vocals, narration, and other audio to be recorded under optimal conditions. Compact, lightweight body design The ECM-S1 comprises compact and lightweight1 microphone / transmitter and receiver units that provide excellent functionality with high digital sound quality. It can be used in a wide variety of environments, both indoors and outdoors with a camera. Operability for real-time confirmation and adjustment An independent AUDIO LEVEL dial allows real-time adjustment of the audio input level with the upper dial. In addition, the connection status between the microphone and receiver can be checked with the LINK lamp. Suitable for long hours of outdoor shooting The receiver and microphone each have built-in batteries. The receiver can be used continuously with direct power supply when connected to the camera's Multi Interface (MI) Shoe2 or to a PC or other device3. The microphone can be used continuously for about 13 hours when fully charged. The microphone can be used for long periods of time without worrying about the battery. Improved flexibility in audio recording through wireless transmission Bluetooth 5.3 (Bluetooth Low Energy) and a LC3plus4 codec provide low power consumption, low latency, and high sound quality. Communication is possible at up to 492 ft (150 m) when there is a good line of sight, for flexibility in outdoor microphone placement. Supports a variety of mounting and attachment methods The microphone can be attached to a stand6 during recording, and the angle of the microphone can be adjusted back and forth. Alternatively, the 1/4″ thread on the bottom of the microphone can be used to mount the microphone on a tripod, or a conversion adaptor can be used to attach the microphone to a boom arm. Multi Interface (MI) Shoe for minimal audio delay and cable-less power supply Connecting the receiver to a camera8 from Sony that supports the Multi Interface (MI) Shoe, such as one of the α™ series digital interchangeable-lens cameras or vlog cameras, eliminates the need for a separate cable to supply power or to provide the audio interface. Wireless sound recording in conjunction with a camera By connecting the receiver to a camera from Sony that supports the Multi Interface (MI) Shoe with a digital audio interface, high-quality audio can be captured and transmitted digitally without degradation, with the wireless connection allowing maximum shooting freedom. Technical Specifications Kit Content 1 Description Microphone (transmitter) Dimension (approx.) W 63.0 mm x H 137.5 mm x D 63.0 mm (2 1/2 inches x 5 1/2 inches x 2 1/2 inches) Weight (Approx.) 157 g (5.6 oz) Kit Content 2 Description Receiver Dimension (approx.) W 32.0 mm x H 29.0 mm x D 50.0 mm (1 5/16 inches x 1 3/16 inches x 2 inches) Weight (Approx.) 25 g (0.9 oz) Supplied Accessory Name / Model (Count) Pop Guard (1), Connector Protect, Holder/Stand (1), Pouch (1), Stand (1) Warranty Provided Microphone Compatibility Compatible Cameras ILME-FX3, ILME-FX30, ILME-FX30B, ILCE-6700, ILCE-6700L, ILCE-6700M, ILCE-7CM2, ILCE-7CM2L, ILCE-7CR, ILCE-7RM5, ZV-E1, ZV-E1L, ILCE-7M4, ILCE-7M4K, ILCE-7RM4A, ZV-E10, ZV-E10L, ILCE-1, ILCE-7C, ILCE-7CL, ILCE-7SM3, ILCE-9M2, ILCE-7RM4 Microphone Specification Operating Temperature 0-deg C to +40-deg C (+32 °F to +104 °F) Microphone Channel Audio Output 2ch Shoe type Multi Interface Shoe Power Supply from Main Unit Multi Interface Shoe Battery Type Built-in lithium-ion battery Number of Battery Required 1 Type Back Electret Condenser Microphone Monaural / Stereo Monaural / Stereo Directivity monoural uni-directional / monoural omni-directional / stereo uni-directional Frequency Response 20 Hz to 20 000 Hz Front sensitivity -20 dBFS (0.1 Pa, 1 kHz)* * Acquired while "8" is selected by the AUDIO LEVEL dial. Intrinsic noise 19 dB SPL or less (0 dB = 2×10⁻⁵ Pa)* * Acquired while "8" is selected by the AUDIO LEVEL dial. * Acquired while "Monaural, Uni-directional" is selected by the directivity selection switch and "LC" is selected by the filter switch. * Acquired while "DIGITAL" is selected by the slide switch. Maximum Input Sound Pressure Level 120 dB SPL* * Equivalent sound pressure level value converted from the input level value that is acquired when 1% waveform distortion is produced by 1 kHz output signals from the microphone. (0 dB = 2×10⁻⁵ Pa) * Acquired while "8" is selected by the AUDIO LEVEL dial. Microphone out jack Yes (3.5 mm mini jack (stereo)) Headphone out jack Yes (3.5 mm mini jack (stereo)) USB Type-C® Terminal Yes Package Form Color carton Hook Attachment Yes
Here is the CarProg programmer for OPEL cars 2003-2009 by OBDII (CAN bus). Also for some ECU you can read/write internal EEPROM. Works by OBDII connector using