From the Iron Boot to the Armadillo Heel and beyond.

3D print files based on Fallout 3 and New Vegas style combat armor. Default scale is for about 6 foot (~180cm). Set includes Helmet, Shoulders, Chest plate, Back plate, Butt plate, Crotch Plate, Hip Plates, Kneepads, Shins and boot caps. Each piece is split up into parts that will fit in a 200mmx200mmx200mm 3D printer area. Many of these parts I printed on my Flashforge Finder 3D printer. I used 0.2mm layer height and 15% infill. I have test printed all the pieces just not finished assembling my own yet if you want to see some pictures just ask me on here I will show you. I used about 4-5 rolls of 1kg filament but your results may vary depending on your printer material and settings.

1. Upper material: semi-soft breathable composite material, sandwich mesh, wheel material: PU, support material: aluminum alloy 2. The size can be adjusted freely according to the foot size of the user. The brake is sensitive to the brake and the high-strength plastic bracket can be used. 3. Good quality and durability 4. Suitable for wearing 38-41 yards in peacetime Use, safety instructions: When using, first adjust the appropriate size, then put a pair of insoles and use them. After each use, tighten the screw of the wheel to prevent the wheel from falling out. Please dont use barefoot, you must wear socks to glide. 1. Children under five years of age should glide under adult supervision. 2. Sufficient protective devices (such as braces, elbows, knees and helmet) should be worn when taxiing. 3. Before sliding, check whether the screws, rivets and shoes on the product are firm. 4. taxiing should be conducted in safe and legal sites. 5. Avoid taxiing in crowded and busy areas or at night. 6. Avoid taxiing on watery, oily or uneven ground. Maintenance of roller skates 1. Often remove and wash the inner sleeve of shoes, which can prevent odor and bacteria. 2. Changing the wheels on the left and right sides often makes the wheels of skates more durable. 3. Avoiding sliding on rough roads can prolong the service life of wheels and bearings. 4. Do not replace wheels or bearings individually, which will reduce the stability of sliding. 5. If the bearing has been used for a long time, when the sliding is not smooth or there is a "sand" sound, the bearing can be removed and immersed in the "de-impregnated oil" for about half an hour, the impurities in the bearing will be cleaned out, and then sprayed with engine oil or special bearing oil. This can extend the service life of bearings. 6. When products are not in use, they should be stored in dry and sunless places. This has a certain effect on preventing rust of fittings and aging of products.

Germany (Augsburg: Lorenz Helmschmid), 1480-85, or possibly a modern forgery.

Bronze Mini Spartan Crested Helmet Decorated with Ibex Carvings-Ancient Greek Civilization Details: Condition: New, Handmade in Greece Material: Pure Bronze Height: 12 cm(4.7 inches) Width: 6 cm(2.4 inches) Weight: 450 g This is a smaller size replica of an ancient Corinthian-style helmet made with bronze material like the originals. The Corinthian helmet type is one of the most immediately recognizable types of helmet, romantically associated with the great heroes of Ancient Greece, even by the Ancient Greeks themselves who rapidly moved to helmet types with better visibility, but still depicted their heroes in these helmets. It was a helmet made of bronze which in its later styles covered the entire head and neck, with slits for the eyes and mouth. A large curved projection protected the nape of the neck. Out of combat, a Greek hoplite would wear the helmet tipped upward for comfort. Originals of these can be seen in museums across the world, but the prototypes are in the Olympia Museum in Greece. In Greek religion and mythology, Aigis- Goat is the "Sigil" of Pan god of the wild, shepherds and flocks, nature of mountain wilds, hunting and rustic music, and companion of the nymphs. A hoplite was the most common type of heavily armed foot soldier in ancient Greece from the 7th to 4th centuries BCE, and most ordinary citizens of Greek city-states with sufficient means were expected to equip and make themselves available for the role when necessary. Hoplites were instrumental in Greek warfare and the victories of Greek armies over Persia at the battle of Marathon (490 BCE) and the battle of Plataea (479 BCE) during the Greco-Persian Wars. All our bronze items are cast in Greece, using the traditional 'lost wax' method. As nothing is mass-produced, there will inevitably be slight variations in patination and coloring. Each piece is, therefore, unique. (262044122600-B) Check our collection of bronze items at https://www.etsy.com/shop/TalosArtifacts?ref=profile_header§ion_id=37382188

https://www.youtube.com/watch?v=axQRM3bQOuU Vicis is back. The one-time Seattle startup darling that went through a major and sudden downfall in 2019 just

The Nista foot grips are designed to enhance your footwork by improving your ground bearing. The slip-on design ensures coverage of your ankle, malleolus, Achilles tendon and instep for an optimal protection against injuries. The neoprene fabric shapes your ankle, accelerates your muscular warm-up, and absorbs perspiration to reduce the risk of slipping. And of course the embossed foot grips provide unmatched mat traction, allowing you to focus on what matters. Neoprene fabric for a warm compressed fit Slip-on design  Embossed grip for traction  Smooth interior lining with flat seams

Graeme Attey can remember the moment when he came up with the idea to design a lightweight helmet to protect sportspeople.

The Open Face German Sallet Helmet was preferred by crossbowmen, archers, spearmen and even cannoneers when rapidly developing firearms appeared on the battlefield. Infantry troops willingly sacrificed the extra protection of closed helmets for a better view and more air. (They needed more air than their mounted brothers in arms since foot combat was a whole body affair.) Our open face sallet is an excellent reproduction 15th century helmet and can be used for re-enactment or display. If you are not planning to use padding in the helm, an optional leather suspension liner is available. The helmet comes with rolled and roped edges. These medieval helmets are hand made and you now have your choice of steel thickness. Children's armor available for children under 4 feet 11 inches. Mild steel 18 gauge helmet circumference : 25 inches - 64 cm Eyes to eyes : 8 inch Front to back : 9 inch

Our Certified Orthotists let us stand out from the crowd; Credentialed experts in orthotics/bracing. Globally recognized, locally committed.

Here is your opportunity to purchase and own a real diving helmet. This is NOT A REPRODUCTION!!! With this helmet, and the right equipment, you can actually dive with this helmet, but most people will probably just display this awesome piece. 200 foot hose kit and all hardware to hook this up to a scuba tank and actually dive this helmet $800 extra. It’s made from brass and has a tinned finish on most of the helmet. Thick glass windows removable front window and functioning side head activated vent valve. It is ready to accept communication equipment and can be purchased as an option, please inquire if interested. 17” X 15” X 15” approx dimensions and 38 lbs. (for reference replica helmets sold on Etsy are approx 12 lbs) This summer you can be diving underwater in a bathing suit using this shallow water helmet. You will however have to make some minor non cosmetic changes though. There is a bit of a bend in the area that goes over the left shoulder. Buyer can fix this and being sold with this bit of damage. FREE SHIPPING TO USA AND CANADA

c. 1575

1. Upper material: semi-soft breathable composite material, sandwich mesh, wheel material: PU, support material: aluminum alloy 2. The size can be adjusted freely according to the foot size of the user. The brake is sensitive to the brake and the high-strength plastic bracket can be used. 3. Good quality and durability 4. Suitable for wearing 32-37 yards in peacetime Use, safety instructions: When using, first adjust the appropriate size, then put a pair of insoles and use them. After each use, tighten the screw of the wheel to prevent the wheel from falling out. Please do not use barefoot, you must wear socks to glide. 1. Children under five years of age should glide under adult supervision. 2. Sufficient protective devices (such as braces, elbows, knees and helmet) should be worn when taxiing. 3. Before sliding, check whether the screws, rivets and shoes on the product are firm. 4. taxiing should be conducted in safe and legal sites. 5. Avoid taxiing in crowded and busy areas or at night. 6. Avoid taxiing on watery, oily or uneven ground. Maintenance of roller skates 1. Often remove and wash the inner sleeve of shoes, which can prevent odor and bacteria. 2. Changing the wheels on the left and right sides often makes the wheels of skates more durable. 3. Avoiding sliding on rough roads can prolong the service life of wheels and bearings. 4. Do not replace wheels or bearings individually, which will reduce the stability of sliding. 5. If the bearing has been used for a long time, when the sliding is not smooth or there is a "sand" sound, the bearing can be removed and immersed in the "de-impregnated oil" for about half an hour, the impurities in the bearing will be cleaned out, and then sprayed with engine oil or special bearing oil. This can extend the service life of bearings. 6. When products are not in use, they should be stored in dry and sunless places. This has a certain effect on preventing rust of fittings and aging of products.

https://www.youtube.com/watch?v=xCG5a-zmx34&ab_channel=MercurOficialWhether you’ve had an injury or unfortunately suffer from a chronic medical problem - ch

Condition: New, Handmade in Greece Material: Pure Bronze Height on base: 48 cm(18.8 inches) Height without base: 38 cm(15 inches) Width: 19 cm(7.5 inches) Length: 34 cm(13.3 inches) Weight: 10.5 kg CORINTHIAN BRONZE HELMET WITH SNAKES Symbol of healing, the serpent was also the guardian and protector of sacred places and objects. The Greeks revered the serpent for its wisdom and healing powers. Originals of these can be seen in museums across the world, but the prototypes are in the Olympia Museum in Greece. A hoplite was the most common type of heavily armed foot soldier in ancient Greece from the 7th to 4th centuries BCE, and most ordinary citizens of Greek city-states with sufficient means were expected to equip and make themselves available for the role when necessary. Hoplites were instrumental in Greek warfare and the victories of Greek armies over Persia at the battle of Marathon (490 BCE) and the battle of Plataea (479 BCE) during the Greco-Persian Wars. All our bronze items are cast in Greece, using the traditional 'lost wax' method. As nothing is mass-produced, there will inevitably be slight variations in patination and coloring. Each piece is, therefore, unique. (28-590-A)

iWALK2.0 is a carefully engineered multiple award winning medical mobility device that ends the pain and inconvenience of conventional crutches. Easy to learn, easy to use, crutches and knee scooters are now obsolete. iWALK2.0 is a carefully engineered multiple award winning medical mobility device that ends the pain and inconvenience of conventional crutches. Easy to learn, easy to use, crutches and knee scooters are now obsolete. Additional Benefits of iWALK2.0 A lower leg injury or surgery can be so frustrating, especially when you must now lead a non-weight-bearing life. How can you walk on a sprained ankle without causing more damage? Enter iWalk2.0. The iWalk2.0 knee walker can be used after surgery to instantly bring back your mobility. The incredible design of the iWalk2.0 lets you get back to work more quickly and continue to lead an active life. You can walk, work, dance, do yoga—pretty much anything you could do before your injury or surgery recovery. By using the iWalk2.0, you can also keep up with everyday chores like grocery shopping and laundry. You can carry a cup of coffee without spilling it all over yourself. You can continue to carry your young children.

Our four boys are always on their skateboards and scooters, and these make wearing a helmet more fun.

I have to say that I was astounded at what I found in the Team Wendy booth. When you first see their X2 Scalable Helmet Prototype it looks pretty much ...

Art.com | We Are Art We exist so you can have the art you love. Art.com gives you easy access to incredible art images and top-notch craftsmanship. High-Quality Framed Art Prints Our high-end framed wall art is printed on premium paper using non-toxic, archival inks that protect against UV light to resist fading. Experience unmatched quality and style as you choose from a wide range of designs to enhance your room décor. Professionally Crafted Framed Wall Art Attention to detail is at the heart of our process, as we exclusively use 100% solid wood frames that include 4-ply white core matboard and durable, frame-grade clear acrylic for clarity, long-lasting protection of the artwork and unrivaled quality. With a thoughtfully selected frame and mat combination, this piece is designed to complement your art and create a visually appealing display. Easy-to-Hang & Ready-to-Display Artwork Each framed art piece comes with hanging hardware affixed to the back of the frame, allowing for easy and convenient installation. Ready to display right out of the box. Handcrafted in the USA. The Print This giclée print delivers a vivid image with maximum color accuracy and exceptional resolution. The standard for museums and galleries around the world, giclée is a printing process where millions of ink droplets are “sprayed” onto high-quality paper. With the great degree of detail and smooth transitions of color gradients, giclée prints appear much more realistic than other reproduction prints. The high-quality paper (235 gsm) is acid free with a smooth surface.   Paper Type: Giclee Print Finished Size: 9" x 12" Arrives by Fri, Jun 21 Product ID: 56433062796A

1. Upper material: semi-soft breathable composite material, sandwich mesh, wheel material: PU, support material: aluminum alloy 2. The size can be adjusted freely according to the foot size of the user. The brake is sensitive to the brake and the high-strength plastic bracket can be used. 3. Good quality and durability 4. Suitable for wearing 38-41 yards in peacetime Use, safety instructions: When using, first adjust the appropriate size, then put a pair of insoles and use them. After each use, tighten the screw of the wheel to prevent the wheel from falling out. Please dont use barefoot, you must wear socks to glide. 1. Children under five years of age should glide under adult supervision. 2. Sufficient protective devices (such as braces, elbows, knees and helmet) should be worn when taxiing. 3. Before sliding, check whether the screws, rivets and shoes on the product are firm. 4. taxiing should be conducted in safe and legal sites. 5. Avoid taxiing in crowded and busy areas or at night. 6. Avoid taxiing on watery, oily or uneven ground. Maintenance of roller skates 1. Often remove and wash the inner sleeve of shoes, which can prevent odor and bacteria. 2. Changing the wheels on the left and right sides often makes the wheels of skates more durable. 3. Avoiding sliding on rough roads can prolong the service life of wheels and bearings. 4. Do not replace wheels or bearings individually, which will reduce the stability of sliding. 5. If the bearing has been used for a long time, when the sliding is not smooth or there is a "sand" sound, the bearing can be removed and immersed in the "de-impregnated oil" for about half an hour, the impurities in the bearing will be cleaned out, and then sprayed with engine oil or special bearing oil. This can extend the service life of bearings. 6. When products are not in use, they should be stored in dry and sunless places. This has a certain effect on preventing rust of fittings and aging of products.