TeckWrap Grau Pearl is slick and delicate. It generates true gloss of a natural pearl, a perfect symbol for the high class. Wrap it and ride with a premium experience. Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it's stretchable enough to quickly wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint. Specifications Conformable polymeric material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface). The thickness of the film(um): 122The thickness of the release liner(um): 142 Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channels Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry001) Storing period (shelf life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place Durability/Warranty: Datasheet (Click the link) Application: from +17°C to +18°C, usage from -45°C to +45°C Release force (N/25mm): Standart: 0.10-0.30, Result:0,17 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 840 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 8,7 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100°C Cure time: 24 hours above ten °C Aftercare: PH neutral. Avoid wax or solvents Directional: Yes Tools: soft squeegees with buffers The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
Passion can lie deeply, but it can never be hidden. Express your desire with the color of passion tenderly, with absolute elegance and delicacy. Show your attitude now in TeckWrap Velvet Red. With a collection of fabulous high-gloss colors, TeckWrap offers you this series of gloss aluminum vinyl wraps, giving your vehicle a distinctive-looking finish. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all of high quality but at reasonable and affordable prices. Specifications It is an advanced polymeric multilayered film with silver coating and air release channels that help achieve smooth application and perfect finish. The thickness of the film(um): 132The thickness of the release liner(um): 180 Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) The adhesive is Henkel solvent polyacrylate. TeckWrap high-tech adhesive is safe for car paint and has moderate initial tack, ensuring easy installation. Transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,1 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1055 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥7,85, Result: 9,7 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue The recommended room temperature for application is from +17°С to +18°С. Service temperature is from -45°С to +45°С. TeckWrap car wrapping film is durable and can be used in extreme temperatures, but we request that customers take care of it as if it were original car paint. Don’t leave your wrapped car under direct sunlight for an extended period to prolong the period of exploitation and ensure dimensional stability. The application method is standard and suitable for polymeric calendared and hybrid films. General recommendations are thorough cleaning, no overstretching, and post-heating to recommended temperatures - 100℃ for flat surfaces and 120℃ for curves and overlaps. We recommend a steam vacuum or IRR heater for installation. Cure time is 24 hours above 15℃, but we recommend keeping the vehicle at room temperature for 48 hours to ensure maximum adhesive activation. Aftercare: PH-neutral products. Avoid hot wax or solvents. Directional: yes Tools: soft squeegee with buffer The protective cap should be peeled off before installation! Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production lot number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day of in-and-out use. The warranty does not cover the scratching of the film.
Diese Handset bietet seinen Nutzern auch unter schwierigen und rauen Umgebungsbedingungen alle Annehmlichkeiten einer mobilen Kommunikation. Als widerstandsfähiges und langlebiges Handset bietet das W59R nicht nur eine optimale HD Audioqualität, sondern nutzt auch mehrere Spitzentechnologien wie FNR (Flexible Noise Reduction), LC3 (Low Complexity Communication Codec) Plus, full duplex, und Opus. Dies ermöglicht den Anwendern ein stabiles und erstklassiges Audioerlebnis, auch wenn die Umgebung voller Störgeräusche oder Funkstörungen ist. Ausserdem erhöhen die umfassenden Alarmfunktionen und der integrierte G-Sensor die Sicherheit am Arbeitsplatz für Personen, die in gefährlichen Umgebungen arbeiten.
Red is not just a color. It’s a symbol of vigor. An upbeat driver deserves to shine along the way. It’s time to let TeckWrap True Blood glow with true gloss for you. With a collection of fabulous high-gloss colors, TeckWrap offers you this series of gloss aluminum vinyl wraps, giving your vehicle a distinctive-looking finish. As a proud supplier, TeckWrap has many film selections that are good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. The adhesive is safe and does not give you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all of high quality but at reasonable and affordable prices. Specifications It is an advanced polymeric multilayered film with silver coating and air release channels that help achieve smooth application and perfect finish. The thickness of the film(um): 132The thickness of the release liner(um): 180 Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) The adhesive is Henkel solvent polyacrylate. TeckWrap high-tech adhesive is safe for car paint and has moderate initial tack, ensuring easy installation. Transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,1 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1055 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥7,85, Result: 9,7 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue The recommended room temperature for application is from +17°С to +18°С. Service temperature is from -45°С to +45°С. TeckWrap car wrapping film is durable and can be used in extreme temperatures, but we request that customers take care of it as if it were original car paint. Don’t leave your wrapped car under direct sunlight for an extended period to prolong the period of exploitation and ensure dimensional stability. The application method is standard and suitable for polymeric calendared and hybrid films. General recommendations are thorough cleaning, no overstretching, and post-heating to recommended temperatures - 100℃ for flat surfaces and 120℃ for curves and overlaps. We recommend installing a steam vacuum or IRR heater. Cure time is 24 hours above 15℃, but we recommend keeping the vehicle at room temperature for 48 hours to ensure maximum adhesive activation. Aftercare: PH-neutral products. Avoid hot wax or solvents. Directional: yes Tools: soft squeegee with buffer The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For the actual representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may be scratched during the application or during a day of in and out-use. The warranty does not cover the scratching of the film.
TeckWrap Berry Red is appealing and blazing, perfect for someone with a strong personality. Wrap now to unleash your passion. TeckWrap offers new, very gloss HD colors that give your vehicle a solid and shiny finish. Smooth one without any orange peel. The material is stretchable, and one can wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The film has a PET protective layer, which helps avoid scratches during the installation process (it should be peeled off before heating), and a plastic liner makes the film's surface more glossy and reflective. Specifications The thickness of the film(um): 110The thickness of the release liner(um): 142Type of film: High grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Package: Roll width 152 cm, length 18 or 23m Install tips: Application: from +16°С to +18°С, usage from -30°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius The protective cap should be peeled off before installation. Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
TeckWrap Battleship Grey is the color of soldiers, strengthening your determination. Wrap to stay courageous and fight for your goals. TeckWrap offers new gloss HD colors that give your vehicle a solid and shiny finish. Smooth one without any orange peel. The material is stretchable, quickly wrapping every edge and recessed area. And the adhesive is safe without giving you any trouble when uninstalling. The film has a PET protective layer, which helps avoid scratches during installation (should be peeled off before heating), and a plastic liner makes the film's surface more glossy and reflective. Specifications The thickness of the film(um): 110The thickness of the release liner(um): 142 Type of film: High-grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Package: Roll width 152 cm, length 18 or 23m Install tips: Application: from +16°С to +18°С, usage from -30°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
TeckWrap Lavender Pearl glows with purple gloss when the light hits it. Always shine when it needs. It’s never shy to show its excellence. Wrap now to feel the extraordinary experience. With a collection of 10 stylish colors in both matte and gloss material, TeckWrap offers you this series of white chameleons vinyl wrap, which gives your vehicle a distinctive finish where it is partly shady with extraordinary luster. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but reasonable and affordable. Specifications Conformable and highly flexible PVC material can be molded to almost every part of a vehicle. Suitable for complete car wrapping (or any other smooth or curved surface). The thickness of the film 0.15mm The thickness of film with release liner: 0.31mmType of film: High-grade polymeric calendared vinyl film with air-release channels Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)Storing period: 2 years if stored at +10°C to +20°C, with relative humidity of 50%, in the original package, away from direct sunlight, clean and dry placeDurability/Warranty: Datasheet (Click the link)Dimensional stability: shrinkage of less than 2%Plastification: between 23%-32%Breaking Strength: 25.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-058.4 N/10mm (Average) Test Method: ASTM D3330/D3330-04Light Ageing in UV Exposure:Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 4-5Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)°C BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)°C BPT, Exposure duration: 48h Install tips: Temperature: from +17°С to +19°С, usage from -45°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surface Directional: yesOverlap width: 3-4mm Post heating: 100°C; cure time: 48 hoursPackage: Roll width 152 cm, length 18 m, weight 14 kg Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out. The warranty does not cover the scratching of the film.
Description Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it's stretchable enough to easily wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint. Specifications Conformable polymeric material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface). The thickness of the film(um): 122The thickness of the release liner(um): 142 Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channels Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) Series: 190 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry001) Storing period (shelf life): 2 years if stored at +10°C to +20°C, with relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place Durability/Warranty: Datasheet (Click the link) Application: from +17°C to +18°C, usage from -45°C to +45°C Release force (N/25mm): Standart: 0.10-0.30, Result:0,17 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 840 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 8,7 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater Application method: Standard methods for calendered films. No overstretching. Post heating Post-heating temperature: 100°C Cure time: 24 hours above ten °C Aftercare: PH neutral, Avoid wax or solvents Directional: Yes Tools: soft squeegees with buffers The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
Description With 20 fabulous high-gloss colors, TeckWrap offers this series of gloss aluminum vinyl wraps, giving your vehicle a distinctive-looking finish. As a proud supplier, TeckWrap has many film selections that are good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. The adhesive is safe and does not give you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices. Specifications It is an advanced polymeric multilayered film with silver coating and air release channels that help achieve smooth application and perfect finish. The thickness of the film(um): 132The thickness of the release liner(um): 180 Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) The adhesive is Henkel solvent polyacrylate. TeckWrap high-tech adhesive is safe for car paint and has moderate initial tack, ensuring easy installation. Transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,1 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1055 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥7,85, Result: 9,7 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue The recommended room temperature for application is from +17°С to +18°С. The recommended service temperature is from -45°С to +45°С. TeckWrap car wrapping film is durable and can withstand extreme temperatures, but we request customers take care of it as if it were original car paint. Don’t leave your wrapped car under direct sunlight for long to prolong the exploitation period and ensure dimensional stability. The application method is standard and suitable for polymeric calendared and hybrid films. General recommendations are thorough cleaning, no overstretching, and post-heating to recommended temperatures - 100℃ for flat surfaces and 120℃ for curves and overlaps. We recommend installing a steam vacuum or IRR heater. Cure time is 24 hours above 15℃, but we recommend keeping the vehicle at room temperature for 48 hours to ensure maximum adhesive activation. Aftercare: PH-neutral products. Avoid hot wax or solvents. Directional: yes Tools: soft squeegee with buffer The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For the actual representation of the product, always check the color swatch. Rolls from the same production lot number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day of in-and-out use. The warranty does not cover the scratching of the film.
Met de Logitech C920 HD Pro voer jij online gesprekken en maak je video's in full hd kwaliteit. Neem een YouTube video op in je slaapkamer, voer een Skype gesprek met je reislustige vriendin in Nieuw-Zeeland en maak 2 MP foto's met deze webcam. Je beeld is nooit wazig, want deze camera beschikt over autofocus. De 2 ingebouwde stereomicrofoons zorgen ervoor dat je altijd duidelijk verstaanbaar bent tijdens een videogesprek of opname. Met de universele clip klik je deze Logitech C920 vast op een statief, je laptop of computerscherm.
맥라렌 창립 60주년 기념 '맥라렌 트리플 크라운' 750S...
If you are passionate about IT and electronics, want to be up to date with the latest technology and don't leave out even the tiniest details.
The Dodge Challenger, revamped for the 2015 model year, is now available
Description With 20 fabulous high-gloss colors, TeckWrap offers this series of gloss aluminum vinyl wraps, giving your vehicle a distinctive-looking finish. As a proud supplier, TeckWrap has many film selections that are good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. The adhesive is safe and does not give you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices. Specifications It is an advanced polymeric multilayered film with silver coating and air release channels that help achieve smooth application and perfect finish. The thickness of the film(um): 132The thickness of the release liner(um): 180 Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) The adhesive is Henkel solvent polyacrylate. TeckWrap high-tech adhesive is safe for car paint and has moderate initial tack, ensuring easy installation. Transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,1 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1055 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥7,85, Result: 9,7 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue The recommended room temperature for application is from +17°С to +18°С. The recommended service temperature is from -45°С to +45°С. TeckWrap car wrapping film is durable and can withstand extreme temperatures, but we request customers take care of it as if it were original car paint. Don’t leave your wrapped car under direct sunlight for long to prolong the exploitation period and ensure dimensional stability. The application method is standard and suitable for polymeric calendared and hybrid films. General recommendations are thorough cleaning, no overstretching, and post-heating to recommended temperatures - 100℃ for flat surfaces and 120℃ for curves and overlaps. We recommend installing a steam vacuum or IRR heater. Cure time is 24 hours above 15℃, but we recommend keeping the vehicle at room temperature for 48 hours to ensure maximum adhesive activation. Aftercare: PH-neutral products. Avoid hot wax or solvents. Directional: yes Tools: soft squeegee with buffer The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For the actual representation of the product, always check the color swatch. Rolls from the same production lot number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day of in-and-out use. The warranty does not cover the scratching of the film.
Yealink VP59 IP Video Phone - Display: 8" (1280x800) Capacitive touch screen - HD Handset, HD Speaker - Android 7.1 OS - Built in Bluetooth 4.2 and dual band 2.4G/5G Wi-Fi - Supports USB/Bluetooth/RJ9 Headset - Dual Port Gigabit Ethernet - VP59
TeckWrap Silver Sunset extracts the light and hue from the sunset sky. It’s excellent to spice up your journey. Order now to seize the grandeur. With a collection of seven new elegant colors, TeckWrap offers you this series of color-shift vinyl wraps, which give your vehicle an elegant finish. As a proud supplier, TeckWrap has plenty of film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is these vinyl wraps from TeckWrap are all of high quality but reasonable and affordable. Specifications Conformable PVC material with stable color pigments. Suitable for complete car wrapping (or any other smooth or curved surface). Films with HD codes have plastic (PVC) liners. The thickness of the film is 0.15mmThe thickness of film with release liner: 0.31mmType of film: High-grade polymeric calendered vinyl film with air release channels Series: 190 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. One side solventless silicone-coated, air release (ISO 9001, ISO 140001, OHSAS 18001)Storing period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place.Durability/Warranty: Datasheet (Click the link)Dimensional stability: shrinkage less than 3%(matte), 5%(glossy)Plastification: between 27%-35%Breaking Strength: 22.7 N/10mm (Average), Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average), Test Method: ASTM D3330/D3330-04Post heating: 110 CelciusLight Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5, Pass, Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)°С BPT, 0.89 W/ (m2•nm)@340nm, four h condensation at (50±2.5)°С BPT, Exposure duration: 49h Install tips: Temperature: from +17-18°С, usage from -45°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surface Directional: yesOverlap width: 3-4mm Package: Roll width 152 cm, length 18 m, weight 14 kg Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
A perfect representation of wisdom and experience, TeckWrap Amazon Grey brings a high-end appearance. Order now to make your journey premium. TeckWrap offers new gloss HD colors that give your vehicle a solid and shiny finish. Smooth one without any orange peel. The material is stretchable, quickly wrapping every edge and recessed area. And the adhesive is safe without giving you any trouble when uninstalling. The film has a PET protective layer, which helps avoid scratches during installation (should be peeled off before heating), and a plastic liner makes the film's surface more glossy and reflective. Specifications The thickness of the film(um): 110The thickness of the release liner(um): 142Type of film: High-grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Package: Roll width 152 cm, length 18 or 23m Install tips: Application: from +16°С to +18°С, usage from -30°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
Gentle and exquisite, TeckWrap China Blue is a perfect symbol of the elegant. Order now to create a classy and decent appearance. TeckWrap offers new gloss HD colors that give your vehicle a solid and shiny finish. Smooth one without any orange peel. The material is stretchable, and one can easily wrap every edge and recessed area. And the adhesive is safe without giving you any trouble when uninstalling. The film has a PET protective layer, which helps avoid scratches during the installation process (it should be peeled off before heating), and a plastic liner makes the film's surface more glossy and reflective. Specifications The thickness of the film(um): 110The thickness of the release liner(um): 142Type of film: High-grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Package: Roll width 152 cm, length 18 or 23m Install tips: Application: from +16°С to +18°С, usage from -30°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
Download Celebrities Wallpapers ✓ Get Free Celebrities Wallpapers in sizes up to 8K ✓ 100% Free ✓ Download & Personalise for all Devices.
Acer Aspire 3 Intel Core i5 12th Generation Laptop (Windows 11 Home/16GB/512 GB SSD/MS Office) A315-59 with 39.6 cm (15.6") Full HD Display, 1.7 Kg, Silver : Amazon.in: Computers & Accessories
Cumpara Televizor LED LG 59 cm (23.6inch) 24MT49DF-PZ, HD Ready, CI la doar 499.00 lei acum pe Updeal.
Insta360 GO 3. HD-Typ: 2K Ultra HD, maximale Videoauflösung: 2560 x 1440 Pixel, maximale Bildrate: 50 fps. Maximale Bildauflösung: 2560 x 1440 Pixel, Unterstützte Bildformate: DNG, INSP. Bildschirmdiagonale: 5,59 cm (2,2"). Maximale Brennweite (Kleinbildfilm-Äquivalent): 11,2 mm, Feste Blende: 2,2 mm. ISO-Empfindlichkeit: 100, 3200, Belichtungskorrektur: ± 4EV.
Sportkocsi háttérkép válogatás HD - 59. Töltsd le oldalunkról ingyen és dobd fel kedvenc mobilod, laptoptod, tableted vagy PC-d a legújabb Sportkocsi válogatás, minőségű háttérképeivel!
100-059-003 Includes Only: Yealink VP59 IP phone Handset with handset cord Ethernet Cable Stand Quick Start Guide The VP59 Android-based phone is designed as an executive desk phone and also can be applied for huddle rooms. With an 8-inch adjustable multi-point touch screen and easy Teams menu navigation, all of these make collaboration easier than ever. Presenting a standalone voice solution and an unparalleled audio clarity, the VP59 is armed with Yealink's Optima HD Voice technology and Yealink Noise Proof technology. The VP59 provides the added flexibility for executives and professionals with its Bluetooth/Wi-Fi connectivity and the ability of USB headset connection. Features with all optional accessories: Microsoft Teams certified edition 8 inch (1280 x 800) capacitive adjustable touch screen Optimal HD audio, support Yealink Noise Proof technology Based on Android 7.1 HDMI for connection to monitor or TV 2 mega-pixel HD camera with privacy shutter Built-in Bluetooth 4.2 Built-in dual band 2.4G/5G Wi-Fi USB 2.0 port Dual-port Gigabit Ethernet, PoE support Full-duplex hands-free speakerphone with AEC Microsoft Teams-tailored user interface Support Microsoft/Yealink/Unify Square device management platform Power supply not included
Looking for a way to unleash your passion fully? Wrap your ride in TeckWrap Cherry Red Chrome, the color that keeps you energized along the way. Order now to enjoy a furious journey. Conformable and flexible PVC material with silver coating. Suitable for car wrapping (or any other smooth or medium curved surface). It has 14 reflective colors to create a distinctive appearance and improve a car's aesthetics. We recommend using a steam vacuum or IRR heater for installation. Thickness of film: 0,11mm The thickness of film with release liner: 0,29mm Type of film: Polymeric vinyl film (silver coating) with air-release channels Series: 180 series Adhesive: Henkel solvent-based moderate adhesive Release liner: White silicone-coated paper with double-sided polyethylene coating Storing period: 3 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, in a clean and dry place Indoor life: 4 years when following rules of application and use Outdoor life: 2 years when following rules of application and use Application: from +17°С to +25°С, usage from -35°С to +35°С Dimensional stability: shrinkage less than 0,20% Plastification: between 23%-31% Package: Roll width 152 cm, length 18 m, weight 13 kg Important note: The images, colors, and finishes on the screen are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production lot number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. One needs to handle metalized films carefully as the appearance of the metalized layer could change upon crumpling, overstretching, and too-strong heating. The film may scratch during the application or the day in and out use. Scratching of the film is not covered by warranty.
1950sbeautifulyears:'56 Buick
Specifications Conformable and reliable Renolit polymeric material. Suitable for full car wrapping (or any other smooth or curved surface). The thickness of the film: 0.13mmThe thickness of film with release liner: 0.29mm Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Type of film: Pressure sensitive high-grade polymeric vinyl film with air release channels Colors: Black Cherry Ice, Gloss green-black, Burgundy Black, Sonoma Green, Gloss beige linen, Antique green, Copper Bronze Series: 190 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Storing period: 3 years if stored in +10°С to +20°С for optimal quality, relative humidity 50%, in original package, away from direct sunlight, clean and dry placeDurability/Warranty: Datasheet (Click the link)Post heating: 100 Celsius Surface gloss (CD): 14.5% (Test method: ASTM D523-99 60 d.angle) Elongation/Break MD:206.8 / CD:196.4 (Test method: ASTM D882-02) Tensile Strength: MD:29.5 / CD:24.8 N/mm2 - Speed 200mm/min (Test method: ASTM D882-02) Dimensional Stability: 2% - Oven/10'*70C(MD) (Test method: ASTM D1204-02) Surface Tension: 34 dynes/cm (Test method: ASTM D2578-04a, 24 hours after production) Install tips: Application temperature: from +17°С to +18°С, usage from -45°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surface Directional: yesOverlap width: 3-4mm The protective cap should be peeled off before installation. Package: Roll width 152 cm, length 18 m, weight 13 kg Important note: The images, colors, and finishes on the screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.
Description With a Rainbow drift collection of these stunning colors, TeckWrap offers color-shifting vinyl wraps, giving your vehicle a unique, stylish finish. As a proud supplier, TeckWrap has many film selections with good conformability and durability. The material is stretchable enough to wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high-quality but reasonably priced. Specifications Conformable material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface). The thickness of the film: 0.13mmThe thickness of film with release liner: 0.30mm Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channelsWidth & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)Series: 190 series Adhesive: Henkel solvent-based acrylic adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Felix Schoeller Release Liner / 20-104-20-1,9 printed, double side PE coated Kraft. (ISO 9001, ISO 140001, OHSAS 18001)Storing period (shelf life): 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place.Durability/Warranty: Datasheet (Click the link)Application: from +17°С to +18°С, usage from -45°С to +45°СDimensional stability: shrinkage less than 3%(matte), 4% (glossy)Plastification: between 27%-35%Breaking Strength: 22.7 N/10mm (Average) Test Method: ASTM D3759/D3759M-057.4 N/10mm (Average)Light Ageing in UV Exposure: Test Method: ASTM D4329-13 Cycle A & ISO 105-A02:1993/Cor.2:2005, Test result: 5, pass, Exposure cycle: ASTM D4329-13 cycle A, Lamp type: UVA-3408h UV at (60±2.5)℃ BPT, 0.89 W/ (m2•nm)@340nm, 4h condensation at (50±2.5)℃ BPT, Exposure duration: 49hRecommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heaterApplication method: Standard methods for calendared films. No overstretching. Post heatingPost-heating temperature: 100℃Aftercare: PH neutral; avoid wax or solvents Directional: yes Tools: soft squeegees with buffers Important note: The screen's images, colors, and finishes are approximate. For an accurate representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
Short Description TeckWrap offers new gloss HD colors that give your vehicle a solid and shiny finish. Smooth one without any orange peel. The material is stretchable, and one can easily wrap every edge and recessed area. And the adhesive is safe without giving you any trouble when uninstalling. The film has a PET protective layer, which helps avoid scratches during the installation process (should be peeled off before heating), and a plastic liner makes the film's surface more glossy and reflective. Specifications The thickness of the film(um): 110The thickness of the release liner(um): 142Type of film: High-grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Package: Roll width 152 cm, length 18 or 23m Install tips: Application: from +16°С to +18°С, usage from -30°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
Flavorful and delightful, TeckWrap Paprika Orange is for someone like you who looks for complete satisfaction in every experience. Order now to enjoy a rich taste of your life. With 20 fabulous high-gloss colors, TeckWrap offers this series of gloss aluminum vinyl wraps, giving your vehicle a distinctive-looking finish. As a proud supplier, TeckWrap has many film selections that are good conformability and durability. The material is stretchable enough to wrap every edge and the recessed area quickly. The adhesive is safe and does not give you any trouble when uninstalling. The better thing is that these vinyl wraps from TeckWrap are all high quality but at reasonable and affordable prices. Specifications It is an advanced polymeric multilayered film with silver coating and air release channels that help achieve smooth application and perfect finish. The thickness of the film(um): 132The thickness of the release liner(um): 180 Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Width & Length: 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd) The adhesive is Henkel solvent polyacrylate. TeckWrap high-tech adhesive is safe for car paint and has moderate initial tack, ensuring easy installation. Transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry Release liner: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films) Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,1 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1055 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥7,85, Result: 9,7 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue The recommended room temperature for application is from +17°С to +18°С. Service temperature is from -45°С to +45°С. TeckWrap car wrapping film is durable and can be used in extreme temperatures, but we request that customers take care of it as if it were original car paint. Don’t leave your wrapped car under direct sunlight for an extended period to prolong the period of exploitation and ensure dimensional stability. The application method is standard and suitable for polymeric calendared and hybrid films. General recommendations are thorough cleaning, no overstretching, and post-heating to recommended temperatures - 100℃ for flat surfaces and 120℃ for curves and overlaps. We recommend installing a steam vacuum or IRR heater. Cure time is 24 hours above 15℃, but we recommend keeping the vehicle at room temperature for 48 hours to ensure maximum adhesive activation. Aftercare: PH-neutral products. Avoid hot wax or solvents. Directional: yes Tools: soft squeegee with buffer The protective cap should be peeled off before installation. Important note: The screen's images, colors, and finishes are approximate. For the actual representation of the product, always check the color swatch. Rolls from the same production lot number should be used to complete a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day of in-and-out use. The warranty does not cover the scratching of the film.
Short Description TeckWrap offers new very gloss HD colors that give your vehicle a solid as well as shiny finish. Smooth one without any orange peel. The material is stretchable, and one can wrap every edge and recessed area easily. And the adhesive is safe without giving you any trouble when uninstalling. The film has a PET protective layer, which helps avoid scratches during the installation process (should be peeled off before heating), and a plastic liner makes the film's surface more glossy and reflective. Specifications The thickness of the film(um): 110The thickness of the release liner(um): 142Type of film: High grade polymeric calendered film with air release Adhesive: Henkel solvent-based acrylic adhesive, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dryRelease liner: Plastic linerStoring period: 2 years if stored in +10°С to +20°С, relative humidity 50%, in original package, away from direct sunlight, clean and dry place. Important: the top protective layer should be removed before installation, and the film should be stored without the protective layer to prevent "tunneling."Durability/Warranty: Datasheet (Click the link) Release force (N/25mm): Standart: 0.10-0.30, Result:0,18 (23℃,54%H) Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 1015 (23℃,54%H) 180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥4.9, Result: 8,1 (23℃,54%H) Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting) Aging (65℃, 7 days): Standart - High-temperature release without adhesive residue, result: no adhesive residue Aging (-65℃, 10 days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue Package: Roll width 152 cm, length 18 or 23m Install tips: Application: from +16°С to +18°С, usage from -30°С to +45°СTools: Standard squeegee with a soft bufferConformability: smooth and medium curved surfaceDirectional: noOverlap width: 3-4mm Post heating: 95 Celcius The protective cap should be peeled off before installation. Important note: The images, colors, and finishes on the screen are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The warranty does not cover the scratching of the film.
Explore SideWalk Custom's 192 photos on Flickr!
Be empowered with the 8" 32 AWG LFH 59 Male to Dual DisplayPort DMS 59 Female Cable, a versatile and high-quality solution for your multi-display needs. This durable cable is specifically engineered to split the video output from a single LFH graphics card onto two DisplayPort (DP) monitors, effectively expanding your visual workspace. Designed to support high-resolution displays of up to 4k x 2k (3840 x 2160), this reliable cable ensures crystal-clear image quality on your screens. It boasts a maximum HBR2 bandwidth of 21.6 Gbps, facilitating smooth and uninterrupted data transmission for a superior viewing experience. This cable is compatible with DMS / LFH 59 or DMS / LFH 60 graphics cards, including those from leading brands such as Matrox, NVIDIA, PNY, ATI, and HP. This broad compatibility makes it a versatile addition to your tech arsenal, ready to meet your diverse connectivity needs. Constructed with molded connectors and strain relief, this cable is designed to withstand the rigors of regular use. Its high-quality materials ensure long-lasting durability, making it a cost-effective solution for replacing damaged or misplaced DMS to 2x DisplayPort cables. Whether you're looking to connect two DisplayPort monitors to a single DMS / LFH 59 or DMS / LFH 60 graphics card port, or seeking a cost-effective alternative to other DMS DisplayPort Cables, the 8" 32 AWG LFH 59 Male to Dual DisplayPort DMS 59 Female Cable is a reliable and affordable choice.
Lowest EverGet Funaurore 7 Inch Touch HD Wireless Car Stereo with Apple Carplay, Android Auto & 1080P Backup Camera, Bluetooth/AUX/FM for All Vehicle for only $59.99.Tagged as: XMBXS01 | XM-BXS-01 | Auto Parts & AccessoriesClick here for complete deal detail and steps on how to get it.Share this deal with your friend/family by sending them this URL: https://www.edealinfo.com/d/00020240424491/Funaurore-7-Inch-Touch-HD-Wireless-Car-Stereo-with-Apple-Carplay Posted: 2024-04-24 21:28:00Get Full Shopping Details On eDeal Info