Materials: several MALM dressers, lots of timber, mounting parts, glaze, optional: LERBÄCK slatted frame

DIY Light Table I joined our preschool board of directors last May and it has been a blast helping get the preschool equipped with awesome learning tools. Our preschool was in need of some upgrades and less "day care" items! We have built new lockers gotten new toys and teaching supplies and have even made some of our own to save some money!! (like our 3 way art easel) Our inspiration Our easel! (The president, Trina, my husband and I made the easel during the summer last year... it was another "we can make that" moment while looking through over priced education catalogs) Because we donated the cost of the project the preschool didn't pay a dime, we saved over $100 making our own and it was so easy! The preschool uses it every day so its priceless! I enjoy "window" shopping through the new education store catalogs that come in and I noticed some different light tables. I have thought our preschool was in need of one after visiting the Telus Spark Science Centre. They are SO expensive!! These two basic tables that are smaller than what we built are OVER $400 CND each. (both from wintergreen.ca) My mom had one made for her back when my sister and I were young for drawing. I knew it was possible to make our own, just needed some inspiration. Off to Pinterest I went... I found everything from train tables converted to frosted Rubbermaid containers used as light tables. I got an idea of what I wanted, started looking at IKEA and what I could convert. I thought if I could convert a cheaper piece of furniture it would save the cost of supplies. So after some planning and sharing my idea with my husband we both started to get excited. My husband got possibly more excited than I was to build one and was thrilled to come up with something that would work. We decided to get enough supplies to build our little preschool a light table and to build our kids one too. We walked though IKEA saying to each other, "This would work" to more than a few different options. But we finally decided on the following: What you need: LATT children's table and chairs. ($24.99 CND and it comes with 2 chairs!) Two sets of the DIODER LED lights. We got two in white ($29.99 CND each) for the Preschool's table and two sets in color ($39.99 CND each) because my husband got a brilliant idea to make our's a color table. After the IKEA run we stopped by Home Depot to get some OPTIX Acrylic sheets, you need exactly an 18"x 24" sheet. we got the .080" ($13.99 CND each) thickness but would suggest thicker if we did it again. Rust-Oleum Frosted Glass Finish spray paint ($7.97) Extras: knife blade to notch out corners or table saw (be careful not to chip Acrylic) Screw Driver (or drill) and 4 small screws Velcro if desired Lets get started!!! (these instructions slightly vary from the solid white LED as for these photos we used the color sets. The only difference is the remote so there are a couple extra wires.) You need the table pieces (if your LATT table comes with the support beams for the top you do not need these, one of our tables did not have these one did so you may end up with extra pieces you wont use, you may not) Step 1: use the white table top to mark on your acrylic sheet the corners that need to be notched out. Then spray several thin coats of frosted finish paint over the acrylic. The more layers you apply the better. Only frost one side as well. One can worked perfectly for 2 tables! The Lights... This is all you get in one of the multi-color LED sets, you wont use all the pieces! This is all you need for cords out of the two sets. You will use all the LED light strips (8), the mini expansion strips (photographed in the project) and the following in the above photo as well as the adhesive strips and clamp pieces. Step 2: Screw all clamp pieces near the bottom of each wide section. On the two smaller sections (not attached to the legs) slightly stagger the clamps because we need to over lap the LED strips on the small ends. They may be hard to see but if you look closely they are slightly staggered. We only did two clamps per wide board and it is plenty! You can always tack down the lights and cords with the little glue strips included in the kit if they are not laying nicely. Step 3: Once the clamps are attached with the mini screws provided in the LED kits you will want to insert the Acrylic sheet where the white board provided for the table would go. This is already notched out on each board and should slide in perfectly. This is why we notched the corners out. Step 4: Assemble the table. Step 5: Insert the lights into the clamps This is how we connected our lights: We connected 2 strips directly to each other, one extension, one strip, two extensions and then the final strip. Make two of these. Connect the two strips that are directly together along the long edges and the first extension will go around the corner, then the other two strips will clamp in over lapping each other (that is why it is important to stagger the clamps on the short ends) Do this to the other side as well. Step 6: add the wires that connect the LED lights to the base adapter. We plugged them in and ran them both on the same side near the legs. Step 7: place the "what is meant to be the top of the table" to the bottom right side down as shown in photo. Step 8: Apply 4 screws at a slight angle to secure the bottom plate to the table. We attached 2 screws on each long end of the table. Be careful not to go through the edge of the table and expose the point of the screw. You can brad nail this down but we chose screws just in case anything needs to be adjusted or lights need to be changed. We also didn't tighten the bottom near cords so we didn't pinch anything. Step 9: Attach cords and adapter to the bottom of the table. We screwed the large adapter to the base and used the sticky strips for the connector piece. (this will look slightly different if using white LED lights, this is the adapter and set for the multi color set) this is what ours looked like when secured and finished, we used a few twist ties to gather extra wires so they looked neat. Step 10: We used velcro dots to secure the remote to the side. Again this is for the multi-color set, for the white set it is just like a lamp switch on the cord, and this is not needed. this is what it looks like secured on the side, but removable for kids to play with. Multi-Color LED table What it looks like when off. Our little princess playing with her new rainbow light table The far table is the white LED lights (photographed yellow but they are definitely not as yellow as shown) ENJOY!!! We have had fun playing all day with our new light table! Photographed below is the white LED light table. Mixing colors with dyed vinegar and baking soda Cheap manipulatives purchased at the dollar store! Playing with Primary colors Adalie, her cousin and her little brother Everett having a blast playing! Did some coloring on the light table too! Playing with plastic ice cubes Demo of the light options of the multi-color led table! So much fun! Hope you enjoyed this DIY Light Table - Ikea Hack. Total cost for White Light Table: about $ 110 Total cost for Multi Color Light Table: $130 Total savings... roughly $280-$300+ Could possibly be made even cheaper with fluorescent lights but my husband loves the idea of LED and I am pleased! UPDATE: We were featured on Buzzfeed! Check it out #18!!! CLICK HERE Check out this other tutorial at Moonbeam And Applesauce

Jeder, der sich gern kreativ austobt und seine eigenen Dinge näht, träumt doch von einem geeigneten Plätzchen für seine Nähmaschine - wo alles…

Materials: Faktum (or equivalent) cabinets, Box Spring Bed (mine is Sultan Salhus), plywood, lumber for footing and inner structure, assorted tools, screws

Ikea Hack klingt jetzt erstmal nach einem komplizierten DIY, aber mein Hack ist ganz einfach. Sofern man ihn überhaupt so nennen darf. Der Blogtitel musste halt irgendwie Google tauglich sein. ;-) Im Grunde habe ich nichts anderes gemacht, als von meiner Ikea Figur "Gestalta" die Stange mit der sie steht abzudrehen. So kann ich sie jetzt in mein Regal setzen und das gefällt mir viel besser. Die Stange kann man auch jederzeit wieder daran drehen. So sieht sie jetzt aber aus wie ein cooles Designer Teil, finde ich.

IKEA wedding hacks are budget-friendly and add a personal touch to your wedding. Create one-of-a-kind decor that reflects your style.

Materials: Ikea GOSIG RÅTTA

Hi Everyone, I KNOW. This is literally one year over due. I have so many questions about the dimensions and the exact steps – how we did it. So here I am, one year later, I am finally typing…

Ikea Flisat dollhouse hacks to turn your Flisat dollhouse into the dollhouse you always dreamed of. Simple ideas as well as detailed makeovers.

Founded in 1943, the Swedish giant Ikea has changed the way we shop design and furniture forever. In a rapidly evolving industry where new trends are born every day, while new products emerge to improve our lives, Ikea has remained relevant for almost 80 years with its solid fanbase.

Make every square inch count with these six easy-to-follow IKEA hacks.

Materials: Ikea GOSIG RÅTTA

Materials: 2 Frosta Stool

This is my IKEA hack of a linear chandelier, which we placed over our dining table. It's minimal, modern and works great.

Ikea inspiration for your classroom! Check out these affordable, flexible, and fun ideas from the international retailer!

Show your IKEA work work work work workspace a little love.

Ready-to-assemble (RTA) furniture isn't just inexpensive. It's also super adaptable!

{action module=widgets controller=SwagDigitalPublishing bannerId=77} Vor ein paar Tagen erreichte uns dieser tolle Hack von Stefanie. Sie stellt…

Aujourd’hui j’avais envie de vous faire découvrir le Ikea Hack. Mais qu’est ce que c’est que ce truc ? Cela consiste à prendre un meuble Ikea (donc pas cher à la base) et de…

Estas ideas harán que con un par de detalles tus muebles parezcan nuevos y la estancia en la que están... ¡también! Apenas necesitarás herramientas y son súper prácticas. Apunta.

Transform the PAX closet to fit a sloped ceiling, turning it into a functional and stylish storage solution. 2 hackers show the way.

What are the best things to buy at IKEA? Here are our favorite 22 items to watch for while you're in the store.

Diy IKEA Hacks that will save you tons of money... These budget DIY projects from IKEA will give you all the home decor inspiration you need!

Hacking Ikea products has been a passion for many (including us!) for a while. Get yourself a cheap piece of furniture as your base and then create something

We’ve never come across an IKEA hack we didn’t like, and these genius IKEA storage hacks are no different.

Gorgeous IKEA Hacks tutorials, tips and ideas on how to upgrade and repurpose IKEA furniture into something stunning!

Hacking Ikea products has been a passion for many (including us!) for a while. Get yourself a cheap piece of furniture as your base and then create something

Hacking Ikea products has been a passion for many (including us!) for a while. Get yourself a cheap piece of furniture as your base and then create something

Tackle the biggest box store around with these simple tips & tricks for shopping at Ikea! Great advice from a seasoned Ikea shopper.

who knew IKEA could look this good?

Shopping at Ikea can be difficult unless you have a plan. I spent months planning and shopping at Ikea for my new home. Follow my plan and make great decisions next time you visit Ikea.

Hack furniture and accessories from Ikea into your own custom decor pieces for just about any room in your home.

Need more organization ideas? Try these creative and brilliant DIY upcycles and IKEA hack ideas to get your entire home organized!

IKEA Furniture Assembly & Disassembly w/out Losing Your Mind! If You Buy Used IKEA Furniture From Craigslist or Yard Sales (or are Moving) This Will Help!

I'm guessing everyone has come across an Ikea hack at some point in their lives. Even Ikea have been known to suggest hacks of their products in-store