Description Forbes & Lomax’s Toggle Switches are based on the elegant nickel and brass light switches of the 1930s. These simple, timeless switches are a refined detail in any interior. Toggle Switches are rated at 15 amps and come in 3-way and 4-way versions. 3-way switches can also be used as single pole switches. Toggle Switches can be mixed with Rotary Dimmers and push buttons on the same plate. Contact us for custom configurations. Established in 1987, Forbes & Lomax is a UK based company with a reputation for high quality design amongst architects and designers. Specifications Switch: Ø 20 mm (0.79”) 1 Gang Plate: W 70 mm (2.76”) X H 115 mm (4.53”)2 Gang Plate: 115 mm (4.53”) X 115 mm (4.53”)3 Gang Plate: W 162 mm (6.38”) X 115 mm (4.53”)4 Gang Plate: W 210mm (8.27”) X 115 mm (4.53”) Available for: Line Voltage (For use in conventionally wired installations) 3-way, 15A (also works as Single-Pole) 4-way, 15A (contact us) Low Voltage: For use on Class 2 Circuits only 2-Position Momentary Dry Contact Toggle (contact us) 3-Position Momentary Dry Contact Toggle (contact us) 3-Position Latching Dry Contact Toggle (contact us) See full Technical Specification sheets below. Important Notes: Toggle switches conform to UL 20 and are certified to CSA C22.2 No.111. Please review and ensure all certifications are applicable for your local code. If unsure, please send our Sales Team full SPECS of lighting for a compatibility review. Must be installed by a licensed electrician. Toggle Switches install into standard junction boxes but the boxes must be recessed below the finished wall surface by at least 1/8". Please refer to the Wallbox Assemble Diagram in the Installation Guide below. If you are installing into existing junction boxes, you will probably find the boxes are already recessed by at least this much but please check to make sure before placing an order. Areas of application: Light-duty Commercial, Residential Material(s) Unlacquered Brass Aged Brass Nickel Silver Brushed Stainless Steel Antique Bronze Note: materials will slowly age or oxidize over time. Wipe clean with a dry, non-abrasive microfiber cloth. Avoid use of chemical or alcohol based cleaners. Refer to the care guide below for best practices. Product Downloads Toggle Switch Product SheetToggle Switch Installation GuideForbes and Lomax BrochureForbes and Lomax Care Guide
Functional fixtures are finally getting a splashy makeover and we've got you covered. We rounded up our favorite colorful appliances, hardware, and finishes to add a pop to your kitchen, bathroom, or living space.
Timeless style. Understated, dependable design. Discover Wandsworth's ever-versatile Classic Collection here. Browse the range:
Features Style: Retro / Nordic Panel Style: Semi-matte SwitchSize: 86 x 86 mm Switch Screw Hole Pitch Voltage: 110V - 220V Current" 10A 50/60Hz Suitable for: Rooms / Kitchen / Bar / Dining Room / Restaurants Material: Flame Retardant Base | Brass Handle Switch Type: Toggle Switch Warranty: 5 years Shipping: Expected delivery between 2-4 weeks
loaded with clever features and benefits, clipsal iconic is comprised of modular mechanisms and grids with changeable skins and dollies.
With this new collection we are making the link with omnipresent technology in our daily lives. The Lucia switch combines touch-technology with a high ‘fun factor’, maintaining CJC’s strict design in aluminum material...
Beautiful light switches & sockets can make finishing touches to your rooms. Shop a range of colours and finishes from Dowsing & Reynolds online now.
Features Style: Modern / LED Switch Type: Push Button Switch Size: 86 x 86 mm Voltage: 110V - 220V Current" 10A 50/60Hz Suitable for: Rooms / Kitchen / Bar / Dining Room / Restaurants Material: Stainless Steel | Acrylic Crystal Panel Warranty: 5 years Shipping: Expected delivery between 2-4 weeks
It’s been over a month since I shared an update on the study, and I might have mentioned that it’s been needing some paint touch-ups, so although it’s been in use, we’ve been anxiously awaiting everything to be finally “done, done.” Well, the good news is that it’s being touched up as we speak, and […]
This is the Clit Switch from the Turned on Series The perfect home decor gift for the maximalist in your life! Display this light switch cover in your living room, bedroom, or give to a fun-loving friend that enjoys a little adult humor. Thank you for your interest!
In a contemporary grey bronze which is a new finish and ideally suited to minimalist interiors. These modern light switches are metal bodied with a matching toggle lever and supplied in single, double, treble or quadruple toggle switch versions.
The Buster + Punch Complete Dimmer Switch is made from solid metal with a diamond cut knurled knob available in White, Black, Steel, Smoked Bronze, or Brass. Dims halogen (10-600 watt) incandescent, and most LED (5-150 watt) loads. The Complete Dimmer includes push On/Off rotary dimmer module compatible with 3-way switching, wall plate, and detail kit. Note: Dimmable with leading edge (TRIAC) dimmers. Does not dim with MLV or 0-10V dimmers. See attached manufacturer spec for more information. Disclaimer: Only one dimmer should be used per 3-way circuit; 2 Gang Dimmers should not share a 3-way circuit.
Matt white and matt black finishes are exciting new additions to this minimalist light switch. The LS990 is a modern classic in switch design, admired by architects since 1967 for its restrained, clean lines and the softly rounded, oversized rocker in the same material as the frame.
Meljac offers a refined, elegant metal option for lighting switches and electrical plates. Buy Meljac now at BrightonPresidio.com.
Small details matter - the right light switch cover will help pull your interior design theme together.
The Buster + Punch Metal Complete On/Off Toggle Switch is a stylish and functional upgrade for your home. The sleek, minimalist design is made from Solid Metal, features a diamond-cut knurled knob, and is available in a variety of finishes. Can be used in 3-way or single pole applications. The switch has a 4 mm shadow gap when installed. This Complete Toggle Switch includes one or two 3-way toggle switches, one wall plate, and a detail kit. This switch is a 15 Amp, 120-277V AC, 60 Hz switch.
Horizon Square It’s good to be square. All the great features of the Horizon Classic style but with square corners for a contemporary edge. Secondary fix Square corners Countersunk hex head screws Matching trimless switches* Contemporary toggle available as standard Matching dual amperage USB socket...
At Lumi & Wood, we're thrilled to offer 3 packs of our decorative handmade made, walnut hardwood light switch and receptacle plate covers! 🌲 Mid-century modern fans, rejoice and jump with glee! These Sunburst-inspired toggle light switch plate covers were created specifically for you. With warm, natural grain lines, genuine brass screws, and satiny smooth finishes, no one can resist the quality and functionality of our wall plates. 🌟 This ad is for 3 of our Sunburst Toggle switch style light switch plate covers. Each set comes with 6 screws. Dimensions: Single Gang 3.22" x5.10" Other options: ♨️ Rocker switch configuration 3 packs : etsy.me/3Zm6Xyx ✨ Outlet 3 packs :https://etsy.me/47d43ze 🌀Need a customized option? Use this link: https://lumiandwood.etsy.com/listing/1449965670 🙏 Please direct custom order questions to our email [email protected] 🌈 Our Walnut plates are available in their natural color, showcasing the wood's beauty and durability. Our finishes are satin in sheen, hard, durable and easy to clean. If you'd like your plates unfinished please identify this at checkout. The color can vary from light brown to dark brown. If you have a specific aesthetic you're trying to accomplish send us a message. We're happy to help♥ Because each piece is crafted by hand and made to order, no two pieces are exactly alike. Please expect unique variations in color, natural texture, and pattern (including woodgrain) from the imagery shown. Wipe clean with slightly damp cloth. 🔩 Each plate includes 2 brass screws (for a total of 6) making installation as simple as plug and play. 📏 Need a custom size? We've got you covered! Please send us a message letting us know what you are looking for and we will devise a solution that fits your space.($100 dollar minimum order for custom sizes) THERE CAN BE VARIATION IN HOW YOUR ELECTRICAL OUTLET SITS IN YOUR WALL. CUSTOM SIZES/CUTOUTS ARE AVAILABLE WITH A $100 MINIMUM ORDER. PLEASE MESSAGE US TO SEE HOW WE CAN ACCOMADATE YOUR SWITCH LAYOUT!
Give your builder grade light switches the boot
As full-time artists who work from our home, it’s important to have spaces throughout our house that feel both creative and bold, as it helps foster our own creativity. Learn where I splurged & where I up-cycled to create this rich and bold bedroom design.
Is Bulbs Included: Yes Shade Direction: Up & Down Application: Kitchen Application: Dining Room Application: Bed Room Application: Foyer Application: Study Certification: CCC Certification: ce Certification: ROHS Is Dimmable: No Base Type: Wedge Voltage: 110V ~ 240V Power Source: AC Switch Type: Touch On/Off Switch Body Material: Iron Shade Type: Acrylic Model Number: WL046 Light Source: LED Bulbs Style: Modern Features: Round Usage: Emergency Material: Acryl Installation Type: Wall Mounted Item Type: Wall Lamps Warranty: 2 Years Number of light sources: 1 Lighting Area: 1-3square meters
The Sol Collection, IP44 certified, consists of high or low current solid brass sockets with watertight flaps.
Re-designed retro switches manufactured in Europe by Katy Paty. This comes with a slim switch. Made of traditional porcelain which is engrained and abrasion resistant. The colours are constant and, unlike colours of plastics they are UV and Dust resistant. Constant colour and highly abrasion-resistant surface. Enamelled and handmade in a top glossy quality. CE conformity certificate available on request. Decorative cover. Guarantee 50 years. Exceptionally durable mechanism with a guaranteed warranty of 10 years. 250V / 10A, the minimum pitch of centres of concealed installation boxes is 100mm (min.95mm), box depth is 43mm. Designed for cavity walls and solid walls. Add the wiring back box which is not included in the price. Assembled to order, please allow 3-4 weeks for delivery. Please note, some images may include our Dyke & Dean logo as a watermark which does not appear on the product itself and some colours and finishes may vary due to screen calibration.
1. Found in a French mansion in that was shuttered for a century A late 19th-century French mansion shuttered for more than a century has opened its doors to the public, revealing an array of outdated luxuries and oddities. The house once belonged to the wealthy, philanthropic, and “egocentric” civil servant Louis Mantin… who died…
This fun, Stars fabric covered, single light switch cover adds a perfect pop to any nursery, kid's room, bedroom or any room in the house! Using a light switch cover, fabric is securely attached with a non-toxic adhesive and then a non-toxic seal is added to the top for lasting durability. Fits most single switches. Measures approx. 2.75 inches wide by 4.5 inches tall. Placement of image may vary slightly but if possible image will be placed in the same way as the picture shows. Other sizes and styles available. Please choose from available sizes or contact me with any special requests.
Lumen Circular Switches have the advantage of bearing a basic framework on which modulation can be done depending upon luxury, style and needs. The design focus
Make an intelligent addition to your home with smart, touch sensitive switches by Basalte. This European company has designed these cool, contemporary
SELECT WHITE IF YOU WOULD LIKE IT TO LOOK LIKE THE PHOTO! The color in the photos is WHITE. The yolk is always yellow you are picking out the EGG WHITE. These are 3D-printed light switch covers, designed by me! They are all made to order so allow up to 2 weeks of processing time. They're made from PLA, with several colors available. :) These are wider than your average light switch cover, so please make sure they will fit in your space before you buy them! They will screw on to any standard single-gang toggle light switch. The color in the photos is WHITE. The yolk is YELLOW you are picking out the background color. They measure about 5.5"x 5.7"x1/2"
Australian International Design Award 2013
For an even more Industrial look and feel, Steampunk Interiors now offers a Copper Handle on our light switches! Just flip the metal levers to turn lights on and off! It is made from 1/4 inch raw steel so it has an authentic Industrial look. My design fits most toggle switches in the USA. Simply unscrew and remove your existing switch plate, and screw this one in in its place. It is very easy to install and screws are included. In addition, if you require toggle switches, we are happy to include them with any order at no additional cost. My lever system has a bolt and nut design that allows you to adjust the amount of torque needed to flip the lights on and off. Your purchase comes with a small, matching wrench to help you adjust the bolts. It also comes with a steel spacer plate that ensures a tight seal against the wall and also prevents wobbling and unsightly gaps between the switch and the wall. The switch plate offers an audible "chunk" sound when the lever is moved, activating the toggle switch(es) it is mounted to. Click this video link if you would like to hear what the switch activation sounds like: https://photos.app.goo.gl/yW7aRzp18NEurrc6A BONUS! - Copper kills bacteria and viruses! In 2015, researchers working on a Department of Defense grant compared infection rates at three hospitals, and found that when copper alloys were used in three hospitals, it reduced infection rates by 58%. A similar study was done in 2016 inside a pediatric intensive care unit, which charted a similarly impressive reduction in infection rate. Check out the full article here: https://www.fastcompany.com/90476550/copper-kills-coronavirus-why-arent-our-surfaces-covered-in-it This design is only compatible with toggle switches (the kind you flick up and down with your finger). If you have a dimmer or rocker switch, I can include a 15A-120V toggle switch with your order at no extra charge. Please notify me via a conversation if you need a complimentary toggle switch. When installing, a good option is to turn your existing toggle switch upside down so that the up/down, on/off action of the levers is not reversed. Before shipping, I clean and oil each piece to prevent rusting and remove plasma dust. Base plate measures 4 ¾ inches tall by 2 ¾ inches wide. Levers extend 4 ¾ inches from the wall. A wider Frankenstein version of this light switch is available here - https://steampunkinteriors.etsy.com/listing/1671297702 It can be used for both single and double toggle switches. If you are looking for light switch covers that are compatible with dimmer knobs, these links will take you to my dimmer switches: Single Dimmer - https://www.etsy.com/listing/255435232/urban-industrial-lighting-dimmer-light?ref=shop_home_active_11 Double Dimmer - https://www.etsy.com/listing/384588146/dimmer-light-switch-cover-gear-lever?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=steampunk%20dimmer%20sillcock&ref=sr_gallery_2 Triple Dimmer - https://www.etsy.com/listing/246749499/industrial-triple-gang-light-switch?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=steampunk%20dimmer%20sillcock&ref=sr_gallery_1 Please allow 3-5 business days before items ship. Custom orders or very large orders may take longer. I accept returns of this item. However, a 20% restocking fee will apply.
Set the mood and change it up in an instant with the flexible interior lighting options and solutions enabled by the PLUG & LIGHT system.
Description Beautiful brass toggle switch plates make an elegant design statement. These pieces are sand cast at the Futagami brass foundry in Takaoka, Japan leaving them with a unique textured surface, called Ihada. Available with 2,3,or 4 toggle options and plates can be customized with debossed room names. Hand crafted in Japan. Specifications W 116 mm (4.6”) X L 120 mm (4.7") Standard set includes:-Plate -3 way power toggle switch-Knob cover -Nut cover -Brass minus screws *The embedded switch box and the crimp terminal are NOT included Options: Custom Room Names. Please contact us directly for customization and pricing. Installation: Must be installed by a licensed electrician. For North America: UL-certified; UL1054 (AC125V, 15A)Please review and ensure all certifications are applicable for your local code. Areas of application: Light-duty Commercial, Residential Material(s) Solid cast brass Note: materials are not lacquered and will age and oxidize over time. Refer to our care guide for best practices. Product Downloads Matureware Switch Plate BrochureSwitch Plate MULTI SQ 2 TOGGLES Product SheetSwitch Plate MULTI SQ 3 TOGGLES Product SheetSwitch Plate MULTI SQ 4 TOGGLES Product SheetMatureware Switch Plate Installation Guide
Spring is the perfect time to dive into home improvements. AD’s editors suggest great products for both small-scale renovations and full-blown redos
I've been on the hunt for amazing steampunk light switches for ages now, and my search has yielded three very different styles I think you guys are gonna love. First, and most common, are the kinetic gear covers from Green Tree Jewelry: ($45 on Etsy) These are gorgeous and fun - and with lots of different styles - but I've always been bugged by the visible light switch. I wanted something more convincingly period-looking for our steampunk room. Then I found these: ( $65 from PuzzlePros) ... and absolutely flipped. (See what I did there?) That's plasma-cut steel, so it's hefty and really real looking, plus it completely covers the existing light switches. The only problem? I needed two double switches... and I'm too cheap to pay $136 for two light switch covers. 0.o Finally, about 3 weeks ago, I stumbled across these: ($12 from NicksPrints85 on Etsy) They're 3D printed, so they don't cost much, and the knife-switch operation (which most call the "Frankenstein" switch) is positively ingenious. Like the other two, it fits right over your existing wall switches! I waited so long to post the ones we bought because John and I have been busy trying to refinish ours. We tried something called vapor smoothing to smooth out the 3D printing grooves - twice! - but sadly it just didn't work. Maybe it's the wrong kind of plastic? So then I applied several coats of a heavy build-able primer, which smoothed them out a little. By that point it had been many days and I was getting extra impatient, so I called them "close enough" and slapped some paint on. Here's the finished product: I'll be honest: I'm not thrilled with the finish. You can still see some diagonal printing grooves, and the "metal" parts are far too rough to ever really look like metal. Happily our steampunk room is quite dark, though, and the switches look WAY COOL from a distance: Claptrap approved! I also can't tell you how fun it is it turn the lights on and off now. The switches make a really satisfying snap, and the levers feel pretty substantial. Since I didn't apply a clear coat, though, some of my top coat is starting to scratch off the switch mechanism, down to the red primer underneath: So I think I may take another crack at refinishing them - especially since I found this amazing version by Thingverse member sdrazga: Really digging the patina'd copper and aged black! I think aging the "metal" is key, so it doesn't need to be smooth. And here's a much better version of the color scheme I was trying for, from Thingverse member kyag: Just to show you guys that these switches can look better than mine. ;) And finally, if you have your own 3D printer you can actually download the single switch design - for free! - here on Thingverse. There are also alternate versions for rocker switches. Happy switching!