Product Information Description The Solna Natural porcelain wood-look wall and floor tile has the wood-grain look and warm color of a natural wooden plank. Easier to care for than a real wood floor, this matte 6" x 35" porcelain tile brings warm beige, taupe and soft brown tones to floors and walls, creating a welcoming space. The tan and brown patterning that runs over the surface of the tile looks just like the subtle grain of a true wood. CALIFORNIA RESIDENTS Click here for Prop 65 Warning Specifications Dimensions Approximate Size 6 x 35 in. Thickness 9.4mm Box Quantity 7 Box Weight 44.1 lbs See More Design & Installation Material Type Porcelain Body Type Standard Body Edge Type Straight Color Ivory Finish Matte Number of Faces 20 Applications Exterior, Floor, Light Commercial, Wall *Please note that these are only recommendations and in some cases the products may be suitable for installation in additional spaces. Room Home Office, Large Format Style Large Format Recommended Grout Desert Sand Directional Layout No Technical Details Country of Origin Spain Water Absorption ≤ 0.5% Surface Abrasions (PEI) 3 Hardness 9 MOHS Frost Resistance Resistant Slip Resistance ≥ 0.42-ANSI A326.3 Resources Safety Data Sheet Porcelain Tile (PDF)
Specifications Dimensions Size 8 x 30 Product Length (inches) 29.50 Product Width (inches) 7.80 Product Thickness 8.5mm Box Length 30 Box Width 8 Box Weight 40.78 lbs Box Quantity 7 Coverage (sqft/pc) 1.61 PEI Rating P.E.I. rating measures Tile design durability from 1-5: P.E.I. of 3 & above is suitable for home use P.E.I. of 5 is suitable for commercial & high traffic areas 4 DCOF Value The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant. >=.42 Water Absorption Though absorption rate may vary, product rated greater than 0.5% is not recommended for outdoor installation, but can be used indoors. All tile is recommended for interior use. Less than 0.50 percent Details Material Porcelain Color Brown Edge Edge-style affects both appearance & ease of installation like: Pressed (rounded edge) Chiseled (rustic look) Rectified (straight edge/smallest grout line) Pressed Finish Matte Look We have options of Tile to match your style. Choose from: Linen, Contemporary, Rectangular, Polished, Slate, Pattern, Stone Look & Wood Look. Wood Look Body Color Through-body: The pattern or color is permeated throughout the entire body of the tile, thus reducing the visibility of dents and chips. Color-body: The body features the most predominate color found in the tile, and the surface showcases the pattern and color. Double-loaded: Porcelain tile that is produced with two layers of porcelain pressed together before it’s fired in the kiln. Standard Body: The raw material used to create this tile is not colored to match the graphics on the surface of the Tile. The body color of the material is indicative of the country of origin’s raw materials. Standard Body Water Resistance Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met. Waterproof Frost Resistance Tile's ability to withstand freeze-thaw cycles when directly exposed to the elements. Frost Resistant Print Quality Print quality on Tile varies from: Ink Jet (highest definition/most realistic) Roto Color (better quality/realistic) Screen Printing (good quality/each tile is identical with no variation) Inkjet Durable Tile is a strong and reliable option for anywhere in the home. See the PEI rating for the exact level of durability and hardness. Yes Country of Origin Direct from the four corners of the globe to bring better products & prices to you. Spain Installation & Warranty Suggested Grout Line Size The recommended grout line thickness for best results in a tile installation. 1/8, 3/16, 3/8, or 1/4 Installation Type Grout & Mortar Placement Location Indoor/ Outdoor Installation Options The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation. Floor/Wall Shower Surface Suitable for Shower Floors Shower Surface Suitable for Shower Walls Pool Surface This product is approved for use on the surface surrounding a pool. Pool Decks No Demolition No need for demolition, as this product can be easily installed over existing tile and subfloors. No Radiant Heat Compatible This states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details. Yes Floor Suitability Rating Light Residential : Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms. • Comparable to PEI 1 & 2 All Residential / Light Commercial : Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable. • Comparable to PEI 3 All Residential / All Commercial : Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports. • Comparable to PEI 4 & 5 All Residential/ All Commercial Bathroom Floor Use Suitable for Bathroom Floor Show More Product Details This brown Alden Natural Wood Plank Porcelain Tile is 8 x 30 with a matte finish. Inkjet print technology produces high-definition images on each tile for a natural, authentic look on the entire surface of the tile itself. The look of wood with the worry-free nature of tile is sure to be the perfect touch for your home. The Alden Natural Wood Plank Porcelain Tile will add a unique touch to any room or project. Everything from the edges to the printed design of the tile can complete the look of your room, and you get can get the added benefit of durability, too. With wood-look tile, you’ll get the look of authentic wood in porcelain tile. The warm look of wood can now be enjoyed with easier maintenance and the greater durability of tile. The P.E.I. scale measures a tile’s ability to withstand foot traffic on a scale of 1-5.This tile’s durability has a P.E.I. rating of 4. With this rating, this tile can withstand moderate to heavy traffic. It’s suitable for all residential and medium-traffic commercial floors or wall applications.
Click here to explore Nasco Stone + Tile's VERA ceramic tile collection and to view some of the sample projects using this product.
Buy Spiral Wood Porcelain Wood Effect Tile 195x1200mm and other tiling accessories at Tile Experience. Order Free Tile Sample 150x150mm with Free Delivery
Browse our selection of wood effect porcelain tiles. Wood effect porcelain tiles perfect for kitchens, bathrooms and living areas. Order your free samples
Click here to see the technical data and spec sheets, or request a sample for Nasco Stone + Tile's FDM 103 porcelain tile.
From porcelain tiles and slabs to pavers and mosaics, we have close to 5,000 different color varieties available. Explore our options here.
Product Information Description Bring out the best in your decor with a background that includes the Amazona Amendoa wood look tile. A solid choice for use as a wall tile or floor tile, this wood-like tile delivers warmth and natural beauty with easy maintenance. Each 8" x 36" piece of porcelain tile offers multiple design options with the look of soft beige with a hint of grey in the bold woodgrain. CALIFORNIA RESIDENTS Click here for Prop 65 Warning Specifications Dimensions Approximate Size 8 x 36 in. Thickness 9mm Box Quantity 9 Box Weight 74.1 lbs See More Design & Installation Material Type Porcelain Edge Type Straight Color Grey, Taupe Finish Matte Number of Faces 15 Applications Exterior, Floor, Light Commercial, Wall *Please note that these are only recommendations and in some cases the products may be suitable for installation in additional spaces. Recommended Grout Mobe Pearl Directional Layout No Technical Details Country of Origin Brazil Frost Resistance Resistant Resources Safety Data Sheet Porcelain Tile (PDF)
Specifications Dimensions Size 8 x 45 Product Length (inches) 45 Product Width (inches) 8 Product Thickness 10mm Box Length 46 Box Width 9 Box Weight 58.42 lbs Box Quantity 5 Coverage (sqft/pc) 2.45 PEI Rating P.E.I. rating measures Tile design durability from 1-5: P.E.I. of 3 & above is suitable for home use P.E.I. of 5 is suitable for commercial & high traffic areas 4 DCOF Value The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant. >=.42 Details Material Porcelain Color Beige Edge Edge-style affects both appearance & ease of installation like: Pressed (rounded edge) Chiseled (rustic look) Rectified (straight edge/smallest grout line) Straight or Rectified Finish Matte Look We have options of Tile to match your style. Choose from: Linen, Contemporary, Rectangular, Polished, Slate, Pattern, Stone Look & Wood Look. Wood Look Body Color Through-body: The pattern or color is permeated throughout the entire body of the tile, thus reducing the visibility of dents and chips. Color-body: The body features the most predominate color found in the tile, and the surface showcases the pattern and color. Double-loaded: Porcelain tile that is produced with two layers of porcelain pressed together before it’s fired in the kiln. Standard Body: The raw material used to create this tile is not colored to match the graphics on the surface of the Tile. The body color of the material is indicative of the country of origin’s raw materials. Standard Body Water Resistance Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met. Waterproof Print Quality Print quality on Tile varies from: Ink Jet (highest definition/most realistic) Roto Color (better quality/realistic) Screen Printing (good quality/each tile is identical with no variation) Inkjet Durable Tile is a strong and reliable option for anywhere in the home. See the PEI rating for the exact level of durability and hardness. Yes Country of Origin Direct from the four corners of the globe to bring better products & prices to you. Spain Installation & Warranty Suggested Grout Line Size The recommended grout line thickness for best results in a tile installation. 1/16, 1/8, or 3/16 Installation Type Grout & Mortar Placement Location Indoor/ Outdoor No Demolition No need for demolition, as this product can be easily installed over existing tile and subfloors. No Radiant Heat Compatible This states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details. Yes Floor Suitability Rating Light Residential : Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms. • Comparable to PEI 1 & 2 All Residential / Light Commercial : Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable. • Comparable to PEI 3 All Residential / All Commercial : Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports. • Comparable to PEI 4 & 5 All Residential/All Commercial Show More Product Details This beige matte Kauri Natural Wood Plank Porcelain Tile is 8 x 45. Inkjet print technology produces high-definition images on each tile for a natural, authentic look on the entire surface of the tile itself. You can never go wrong with the warm look of wood when you pair it with the durability and versatility of tile. The Kauri Natural Wood Plank Porcelain Tile will create a unique touch to any room or project with everything from the edges to the printed design. Not only does porcelain wood-look tile have the dimension and variety of the rich colors of authentic wood, it’s also durable and easy to maintain. The P.E.I. scale measures a tile’s ability to withstand foot traffic on a scale of 1-5. This tile’s durability has a P.E.I. rating of 4. With this rating, this tile can withstand moderate to heavy traffic. It’s suitable for all residential and medium-traffic commercial floors or wall applications.
Inspired by rural countryside, the Grove collection allows you to attain the look and character of aged, weathered wood while also enjoying the durability and ease of maintenance that porcelain tile brings. Capturing the essence of reclaimed wood. Copse gives homeowners and interior designers alike a multitude of rich options in curating a cozy, naturally welcoming space. What's Included? 12.91 Square Feet Per Box 20 Pieces Per Box Features Grade 1 porcelain tile for floor and wall use The sample size of the tile measures approximately 6" L x 3" W This Product has PEI Rating of 4 (endurance and hardness indicator), and therefore is suited for all residential uses (walls and floors) and light-duty commercial applications Note: Do not dry-cut porcelain or ceramic tiles when installing due to the potential for exposure to silica dust. Use a wet saw or a score and snap tool when cutting. See More
Product Information Description The Wood Oak wood look wall and floor tile from Fired Earth Ceramics has an imprinted surface texture similar to that of a natural oak. This versatile porcelain tile can lend itself to both modern rustic and traditional stylings, depending on what it is paired with. A matte finish provides a genuine look, while the durable design looks great in any room, entryway or hallway. CALIFORNIA RESIDENTS Click here for Prop 65 Warning Specifications Dimensions Approximate Size 6 x 24 in. Box Quantity 16 Box Weight 62.5 lbs See More Design & Installation Material Type Porcelain Body Type Standard Body Edge Type Straight Brand Fired Earth Color Brown Finish Matte Applications Exterior, Floor, Light Commercial, Wall *Please note that these are only recommendations and in some cases the products may be suitable for installation in additional spaces. Room Bedroom, Living Room, Outdoor Recommended Grout Mobe Pearl Directional Layout No Technical Details Country of Origin Turkey Water Absorption ≤ 0.5% Surface Abrasions (PEI) 3 Hardness >6 MOHS Frost Resistance Resistant Slip Resistance >0.42-ANSI A326.3 R9-DIN 51130 Resources Safety Data Sheet Porcelain Tile (PDF)
Top wood look tile flooring advantages & disadvantages for your project. Expert & consumer reviews for the best wood-grain tile floor options. Pros & cons, costs, and a buying guide for the top (and most common) brands, including Merola, Vitromex, Florim, Daltile, MSI, Ragno, Porcelonosa and more.
Buy Parquet wood effect porcelain tile plank style in 280x70mm at Tile Experience. Order free sample next day delivery. Other tiling accessories available
Click here to see the technical data and spec sheets, or request a sample of Nasco Stone + Tile's Love Bars Ceramic tile collection.
Click here to explore Nasco Stone + Tile's Flumeri porcelain tile collection and to view some of the sample projects using this product.
Specifications Dimensions Size 7 x 24 Product Length (inches) 23.80 Product Width (inches) 7 Product Thickness 9.5mm Box Length 24.02 Box Width 7.24 Box Weight 57.69 lbs Box Quantity 12 Coverage (sqft/pc) 1.17 PEI Rating P.E.I. rating measures Tile design durability from 1-5: P.E.I. of 3 & above is suitable for home use P.E.I. of 5 is suitable for commercial & high traffic areas 4 DCOF Value The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant. >=.42 Water Absorption Though absorption rate may vary, product rated greater than 0.5% is not recommended for outdoor installation, but can be used indoors. All tile is recommended for interior use. 3-8 Percent Details Material Ceramic Color Brown Edge Edge-style affects both appearance & ease of installation like: Pressed (rounded edge) Chiseled (rustic look) Rectified (straight edge/smallest grout line) Pressed Finish Matte Look We have options of Tile to match your style. Choose from: Linen, Contemporary, Rectangular, Polished, Slate, Pattern, Stone Look & Wood Look. Wood Look Body Color Through-body: The pattern or color is permeated throughout the entire body of the tile, thus reducing the visibility of dents and chips. Color-body: The body features the most predominate color found in the tile, and the surface showcases the pattern and color. Double-loaded: Porcelain tile that is produced with two layers of porcelain pressed together before it’s fired in the kiln. Standard Body: The raw material used to create this tile is not colored to match the graphics on the surface of the Tile. The body color of the material is indicative of the country of origin’s raw materials. Standard Body Water Resistance Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met. Water Resistant Print Quality Print quality on Tile varies from: Ink Jet (highest definition/most realistic) Roto Color (better quality/realistic) Screen Printing (good quality/each tile is identical with no variation) Inkjet 50% More Slip Resistant 50% more slip resistant tiles give a result of 0.63 or greater for the Dynamic Coefficient of Friction (DCOF) test. The most common industry reference for the DCOF test is to 0.42 as the ANSI standard for use on wet surfaces. This tile has a DCOF 50% greater than this standard. Yes Durable Tile is a strong and reliable option for anywhere in the home. See the PEI rating for the exact level of durability and hardness. Yes Country of Origin Direct from the four corners of the globe to bring better products & prices to you. Mexico Installation & Warranty Suggested Grout Line Size The recommended grout line thickness for best results in a tile installation. 1/8, 3/16, 3/8, or 1/4 Installation Type Grout & Mortar Placement Location Indoor Installation Options The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation. Floor/Wall Shower Surface Not Suitable for Shower Floors Shower Surface Suitable for Shower Walls No Demolition No need for demolition, as this product can be easily installed over existing tile and subfloors. No Radiant Heat Compatible This states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details. Yes Floor Suitability Rating Light Residential : Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms. • Comparable to PEI 1 & 2 All Residential / Light Commercial : Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable. • Comparable to PEI 3 All Residential / All Commercial : Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports. • Comparable to PEI 4 & 5 All Residential/ All Commercial Bathroom Floor Use Suitable for Bathroom Floor Show More Product Details The 7 x 24 Carson Brown Wood Plank Ceramic Tile is brown with a matte finish. Inkjet print technology produces high-definition images on each tile for a natural, authentic look on the entire surface of the tile itself. The look of wood with the worry-free nature of tile is sure to be the perfect touch for your home. The Carson Brown Wood Plank Ceramic Tile will add a unique touch to any room or project. Everything from the edges to the printed design of the tile can complete the look of your room, and you get can get the added benefit of durability, too. Not only does ceramic wood-look tile have the dimension and variety of the rich colors of authentic wood, it’s also durable and easy to maintain. The P.E.I. scale measures a tile’s ability to withstand foot traffic on a scale of 1-5. This tile’s durability has a P.E.I. rating of 4. With this rating, this tile can withstand moderate to heavy traffic. It’s suitable for all residential and medium-traffic commercial floors or wall applications. This tile is 50% more slip resistant when compared to ordinary tile that has a DCOF less than or equal to 0.42
I'm looking for ideas to use up the broken and cut pieces that are left over. They are porcelain that look like wood with an actual grain in the tile. Mosaics is one idea I already had, but was hoping to find some other ideas. Looking for something that might have a rustic appeal. TIA, Valerie
If you are weighing up wood tile vs wood floor but can't decide - you love the wood floor look but want a more durable option. You may be thinking is there tile that looks like wood? Well there is, and what's more wood tile is in style. Opting for a wood like tile in the bathroom is a great idea. You may be asking what is wood plank tile? Well, read on to discover the difference types of wood-effect tile and wood tile shower ideas.
Looking for a wood tile floor for a kitchen makeover? Try using porcelain tile that looks like wood for a lovely distressed farmhouse look.
Barnwood Cognac 8 in. x 36 in. Glazed Porcelain Floor and Wall Tile combines a glazed, matte finish with a low sheen and subtle variations in tone to create a contemporary look that perfectly suits a variety of decorative schemes. This tile is created by high definition digital printing using an ink-jet technology to create a wood looking replica. This rectangular tile is constructed from durable porcelain material, is suitable for installation on walls, floors and countertops and features an impervious water absorption rating. 280 sq. ft. 7-pieces per case 20-cases per pallet pallet weighs 946.4 lbs. Grade 1, porcelain tile for floor, wall and countertop use 8 in. width x 36 in. length x 9.9 mm thick Glazed smooth finish with a low sheen and slight variation in tone PEI rating III is suitable for medium-duty residential and commercial floors including kitchens, halls, terraces and areas used more often with normal footwear and small amounts of dirt Impervious tile has water absorption of less than 0.5% for indoor or outdoor use and is frost proof Cof greater than 060 to 079 is required for commercial applications to meet or exceed ada guidelines; skid resistant; indoor and outdoor use Completely frost resistant for indoor or outdoor applications; use a latex-modified thin set for acceptable bond strength Residential and commercial use Don't forget your coordinating trim pieces, grout, backerboard, thinset, and installation tools All online orders for this item ship via parcel ground and may arrive in multiple boxes It is recommended you purchase a minimum of 10% overage to account for design cuts and pattern Greenguard indoor air quality certified and greenguard children and schools certified product To ensure consistency of size and color, please capture all tiles for a project within 1-order, each item within an order is selected from a single color (dye lot) and size (caliber), so multiple orders may receive various colors and/or sizes Ceramic/porcelain, lvt and natural stone tile within a corresponding series may be produced at different times; while true to the tile, this may cause a variation in color and size 1-year limited warranty is provided on flooring and surfacing products manufactured or distributed by MSI within the limitations explicitly outlined in the warranty statement
These Bosco Noce Wood Effect Tiles are inspired by traditional herringbone parquet. Our Bosco range has an undulating matt finish, which replicates the finish of authentic hand-scraped wood. The gradual tonal variation runs throughout the replica grains and knots, for a characterful appearance.
Get the technical data or to request a sample for Nasco Stone + Tile's Majestic White + Athens Wood Basketweave 1″ x 2″ marble mosaic tile.
Specifications Dimensions Size 12 x 60 Product Length (inches) 58.80 Product Width (inches) 11.80 Product Thickness 10mm Box Length 59.02 Box Width 11.93 Box Weight 65.08 lbs Box Quantity 3 Coverage (sqft/pc) 4.83 PEI Rating P.E.I. rating measures Tile design durability from 1-5: P.E.I. of 3 & above is suitable for home use P.E.I. of 5 is suitable for commercial & high traffic areas 3 DCOF Value The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant. >=.42 Water Absorption Though absorption rate may vary, product rated greater than 0.5% is not recommended for outdoor installation, but can be used indoors. All tile is recommended for interior use. Less than 0.50 percent Details Material Porcelain Color Brown Edge Edge-style affects both appearance & ease of installation like: Pressed (rounded edge) Chiseled (rustic look) Rectified (straight edge/smallest grout line) Straight or Rectified Finish Matte Look We have options of Tile to match your style. Choose from: Linen, Contemporary, Rectangular, Polished, Slate, Pattern, Stone Look & Wood Look. Wood Look Body Color Through-body: The pattern or color is permeated throughout the entire body of the tile, thus reducing the visibility of dents and chips. Color-body: The body features the most predominate color found in the tile, and the surface showcases the pattern and color. Double-loaded: Porcelain tile that is produced with two layers of porcelain pressed together before it’s fired in the kiln. Standard Body: The raw material used to create this tile is not colored to match the graphics on the surface of the Tile. The body color of the material is indicative of the country of origin’s raw materials. Standard Body Water Resistance Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met. Waterproof Frost Resistance Tile's ability to withstand freeze-thaw cycles when directly exposed to the elements. Frost Resistant Print Quality Print quality on Tile varies from: Ink Jet (highest definition/most realistic) Roto Color (better quality/realistic) Screen Printing (good quality/each tile is identical with no variation) Inkjet 50% More Slip Resistant 50% more slip resistant tiles give a result of 0.63 or greater for the Dynamic Coefficient of Friction (DCOF) test. The most common industry reference for the DCOF test is to 0.42 as the ANSI standard for use on wet surfaces. This tile has a DCOF 50% greater than this standard. Yes Durable Tile is a strong and reliable option for anywhere in the home. See the PEI rating for the exact level of durability and hardness. Yes Country of Origin Direct from the four corners of the globe to bring better products & prices to you. Spain Installation & Warranty Suggested Grout Line Size The recommended grout line thickness for best results in a tile installation. 1/16, 1/8, or 3/16 Installation Type Grout & Mortar Placement Location Indoor/ Outdoor Installation Options The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation. Floor/Wall Shower Surface Suitable for Shower Floors Shower Surface Suitable for Shower Walls Pool Surface This product is approved for use on the surface surrounding a pool. Pool Decks No Demolition No need for demolition, as this product can be easily installed over existing tile and subfloors. No Radiant Heat Compatible This states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details. Yes Floor Suitability Rating Light Residential : Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms. • Comparable to PEI 1 & 2 All Residential / Light Commercial : Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable. • Comparable to PEI 3 All Residential / All Commercial : Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports. • Comparable to PEI 4 & 5 All Residential/ Light Commercial Bathroom Floor Use Suitable for Bathroom Floor Show More Product Details This brown Medora Brown Wood Plank Porcelain Tile is 12 x 60 with a matte finish. Inkjet print technology produces high-definition images on each tile for a natural, authentic look on the entire surface of the tile itself. You can never go wrong with the warm look of wood when you pair it with the durability and versatility of tile. The Medora Brown Wood Plank Porcelain Tile will create a unique touch to any room or project with everything from the edges to the printed design. Not only does porcelain wood-look tile have the dimension and variety of the rich colors of authentic wood, it’s also durable and easy to maintain. The P.E.I. scale measures a tile’s ability to withstand foot traffic on a scale of 1-5. This tile has a P.E.I. rating of 3, so it can be used for all interior countertop applications, indoor walls, and allresidential interior floors. This tile should not be used in commercial applications. This tile is 50% more slip resistant when compared to ordinary tile that has a DCOF less than or equal to 0.42
This tile provides the strength of lasting porcelain with the warmth and style of natural cherry hardwood. With subtle shade variations in tones of deep warm brown this 8 in. x 36 in. tile is a wonderful alternative to traditional wood. Beautiful Wood Cherry will add true beauty to create a memorable and inviting space."}},"base-catalog-322719077":{"__typename":"BaseProduct 367.2 sq. ft. per pallet, 27 cases per pallet; pallet weight equals 1,705 lbs. Grade one, glazed porcelain tile for floor or wall use 8 in. width x 36 in. length x 0.394 in. thick Matte finish with a medium shade variation in tones of brown for a realistic wood look in a durable glazed porcelain tile P.E.I. rating III suitable for residential D.C.O.F. acutest greater than or equal to 0.42 makes it suitable for indoor and outdoor application Completely frost resistant for indoor or outdoor applications; use a latex modified thinset for acceptable bond strength Durable surface with a Mohs hardness rating of seven Quartz Learn how to get a lifetime warranty by using custom building products from The Home Depot. Visit www.homedepot.com/CBP Don't forget your coordinating trim pieces, grout, backerboard, thinset, and installation tools Tile is available for Home Depot online and special order purchase It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns.
Product Information Description The Solna Natural porcelain wood-look wall and floor tile has the wood-grain look and warm color of a natural wooden plank. Easier to care for than a real wood floor, this matte 6" x 35" porcelain tile brings warm beige, taupe and soft brown tones to floors and walls, creating a welcoming space. The tan and brown patterning that runs over the surface of the tile looks just like the subtle grain of a true wood. CALIFORNIA RESIDENTS Click here for Prop 65 Warning Specifications Dimensions Approximate Size 6 x 35 in. Thickness 9.4mm Box Quantity 7 Box Weight 44.1 lbs See More Design & Installation Material Type Porcelain Body Type Standard Body Edge Type Straight Color Ivory Finish Matte Number of Faces 20 Applications Exterior, Floor, Light Commercial, Wall *Please note that these are only recommendations and in some cases the products may be suitable for installation in additional spaces. Room Home Office, Large Format Style Large Format Recommended Grout Desert Sand Directional Layout No Technical Details Country of Origin Spain Water Absorption ≤ 0.5% Surface Abrasions (PEI) 3 Hardness 9 MOHS Frost Resistance Resistant Slip Resistance ≥ 0.42-ANSI A326.3 Resources Safety Data Sheet Porcelain Tile (PDF)
About The Tile: Our Silkwood Almond Beige captures the depth and movement of natural wood, accentuating the subtle knots and striations of the grain. The organic and raw character of this porcelain tile can make up the subtle backdrop of any room or stand out as a bold statement. The timeless quality of this shade is what makes it versatile, and it can easily be used in both commercial and residential settings, on both the floor and wall. Key Features Made in Italy Classic Almond Beige Colorway Warm, Stylish, Wood-Look Design 8x48" Matte Porcelain Plank Shaped Tile Made for Residential and Commercial Wall | Floor Use Great for Kitchen, Backsplash, Bathroom, Shower, Outdoor About The Collection: Warm, stylish, and minimal: Our Silkwood Collection combines the durability and elegance of porcelain with timeless quality of hardwood floors. Inspired by the minimalist neutrality of Nordic design, these wood-look tiles offer a large variety of faces for each colorway ensuring that the natural variations of a classic wood floor look shine through while the softly bright, lighter shades of white and grey and the boldness of the darker walnut and dark brown help to create the sense of organic beauty. The range of matte finish colorways in these 8x48” plank size allows the transformation of any space into a serene and intimate haven.
See the technical data and spec sheets, or request a sample for Nasco Stone + Tile's Agglo Rosa Perlino Terrazzo Marble slab and tile.
Specifications Dimensions Size 10 x 47 Product Length (inches) 47.20 Product Width (inches) 9.70 Product Thickness 10mm Box Length 47.60 Box Width 17.70 Box Weight 60.62 lbs Box Quantity 5 Coverage (sqft/pc) 3.01 PEI Rating P.E.I. rating measures Tile design durability from 1-5: P.E.I. of 3 & above is suitable for home use P.E.I. of 5 is suitable for commercial & high traffic areas 4 DCOF Value The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant. >=.42 Water Absorption Though absorption rate may vary, product rated greater than 0.5% is not recommended for outdoor installation, but can be used indoors. All tile is recommended for interior use. Less than 0.50 percent Details Material Porcelain Color Beige Edge Edge-style affects both appearance & ease of installation like: Pressed (rounded edge) Chiseled (rustic look) Rectified (straight edge/smallest grout line) Pressed Finish Matte Look We have options of Tile to match your style. Choose from: Linen, Contemporary, Rectangular, Polished, Slate, Pattern, Stone Look & Wood Look. Wood Look Body Color Through-body: The pattern or color is permeated throughout the entire body of the tile, thus reducing the visibility of dents and chips. Color-body: The body features the most predominate color found in the tile, and the surface showcases the pattern and color. Double-loaded: Porcelain tile that is produced with two layers of porcelain pressed together before it’s fired in the kiln. Standard Body: The raw material used to create this tile is not colored to match the graphics on the surface of the Tile. The body color of the material is indicative of the country of origin’s raw materials. Standard Body Water Resistance Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met. Waterproof Print Quality Print quality on Tile varies from: Ink Jet (highest definition/most realistic) Roto Color (better quality/realistic) Screen Printing (good quality/each tile is identical with no variation) Inkjet Durable Tile is a strong and reliable option for anywhere in the home. See the PEI rating for the exact level of durability and hardness. Yes Country of Origin Direct from the four corners of the globe to bring better products & prices to you. Spain Installation & Warranty Suggested Grout Line Size The recommended grout line thickness for best results in a tile installation. 1/8, 3/16, 3/8, or 1/4 Installation Type Grout & Mortar Placement Location Indoor Installation Options The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation. Floor/Wall Shower Surface Suitable for Shower Floors Shower Surface Suitable for Shower Walls No Demolition No need for demolition, as this product can be easily installed over existing tile and subfloors. No Radiant Heat Compatible This states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details. Yes Floor Suitability Rating Light Residential : Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms. • Comparable to PEI 1 & 2 All Residential / Light Commercial : Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable. • Comparable to PEI 3 All Residential / All Commercial : Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports. • Comparable to PEI 4 & 5 All Residential/ All Commercial Bathroom Floor Use Suitable for Bathroom Floor Show More Product Details This beige matte Truewood Cream Wood Plank Porcelain Tile is 10 x 47. Inkjet print technology produces high-definition images on each tile for a natural, authentic look on the entire surface of the tile itself. The look of wood with the worry-free nature of tile is sure to be the perfect touch for your home. The Truewood Cream Wood Plank Porcelain Tile will add a unique touch to any room or project. Everything from the edges to the printed design of the tile can complete the look of your room, and you get can get the added benefit of durability, too. Not only does porcelain wood-look tile have the dimension and variety of the rich colors of authentic wood, it’s also durable and easy to maintain. The P.E.I. scale measures a tile’s ability to withstand foot traffic on a scale of 1-5. This tile’s durability has a P.E.I. rating of 4. With this rating, this tile can withstand moderate to heavy traffic. It’s suitable for all residential and medium-traffic commercial floors or wall applications.
Unsure about the look? Order an affordable tile sample today so you can see the tile up close prior to placing your full order. 👉 SAMPLES ARE INTENDED FOR COLOR AND TEXTURE REFERENCE ONLY, NOT FOR INSTALLATION. The Nevada Wood Silo exalts the sought-after style with its delicate brushed look. The details of the tile guarantee a visual effect of unique intensity with neutral and warm farmhouse shades. The waterproof, scratch-, stain- and frost-resistant porcelain is ideal for indoor/outdoor use and can easily be installed in high-traffic areas for versatility throughout your home."}},"base-catalog-322753231":{"__typename":"BaseProduct 0.55 sq. ft./Sample; 2.00 lb./Sample 8 in. width x 10 in. length x 0.325 in. thick Grade 1, first-quality porcelain tile for walls of tremendous aesthetic impact, characterized by spectacular contrasts of light and shadow sculpted by an elegant lighting that exalts or softens the surface depth. Glazed, slightly textured finish with low sheen and slight variation in tone. Suitable for both residential and commercial use. Class 4 abrasion resistance (medium to heavy traffic) - suitable for all residential applications (both walls and floors), as well as medium commercial and light institutional locations, Truly waterproof - porcelain flooring has water absorption of less than 0.5%, and it is suitable for indoor or outdoor use. Completely frost resistant for indoor and outdoor applications. We recommend using a modified thin set when outdoor, according to the manufacturer. Slip resistance DCOF greater than or equal to .42 - all Corso Italia tiles meet ANSI requirements for use on level interior or exterior floors expected to be walked upon when wet (not recommended for outdoor wet areas such as pools, where we recommend higher slip resistance - check out Corso Italia porcelain pavers). Please ensure that all tile needed for a project is obtained within 1 order - multiple orders can result in receiving multiple dye lots and/or calibers, related to different production batches, which may slightly vary. Overlap during installation should not exceed 33% (a third of the tile length), 50% overlap not recommended. Made from natural ingredients, free from allergens, VOCs, formaldehyde and PVC. It is naturally inhospitable to bacteria and stain resistant - regular household cleaning will keep surface clean and sanitized. All online orders for this item ship via parcel ground and may arrive in multiple boxes.
Product Information Description The Solna Natural porcelain wood-look wall and floor tile has the wood-grain look and warm color of a natural wooden plank. Easier to care for than a real wood floor, this matte 6" x 35" porcelain tile brings warm beige, taupe and soft brown tones to floors and walls, creating a welcoming space. The tan and brown patterning that runs over the surface of the tile looks just like the subtle grain of a true wood. CALIFORNIA RESIDENTS Click here for Prop 65 Warning Specifications Dimensions Approximate Size 6 x 35 in. Thickness 9.4mm Box Quantity 7 Box Weight 44.1 lbs See More Design & Installation Material Type Porcelain Body Type Standard Body Edge Type Straight Color Ivory Finish Matte Number of Faces 20 Applications Exterior, Floor, Light Commercial, Wall *Please note that these are only recommendations and in some cases the products may be suitable for installation in additional spaces. Room Home Office, Large Format Style Large Format Recommended Grout Desert Sand Directional Layout No Technical Details Country of Origin Spain Water Absorption ≤ 0.5% Surface Abrasions (PEI) 3 Hardness 9 MOHS Frost Resistance Resistant Slip Resistance ≥ 0.42-ANSI A326.3 Resources Safety Data Sheet Porcelain Tile (PDF)
Barnwood Cognac 8 in. x 36 in. Glazed Porcelain Floor and Wall Tile combines a glazed, matte finish with a low sheen and subtle variations in tone to create a contemporary look that perfectly suits a variety of decorative schemes. This tile is created by high definition digital printing using an ink-jet technology to create a wood looking replica. This rectangular tile is constructed from durable porcelain material, is suitable for installation on walls, floors and countertops and features an impervious water absorption rating. 14 sq. ft., 7 pieces per case; case weight is 47.30 lb. Grade 1, porcelain tile for floor, wall and countertop use 8 in. width x 36 in. length x 2/5 in. thick Glazed smooth finish with a low sheen and slight variation in tone P.E.I. Rating III is suitable for medium-duty residential and commercial floors including kitchens, halls, terraces and areas used more often with normal footwear and small amounts of dirt Impervious tile has water absorption of less than 0.5% for indoor or outdoor use and is frost proof C.O.F. greater than .60 to .79 is required for commercial applications to meet or exceed ADA (Americans with Disabilities Act) Guidelines. Skid Resistant. Indoor and outdoor use Completely frost resistant for indoor or outdoor applications; use a latex-modified thinset for acceptable bond strength Residential and commercial use Don't forget your coordinating trim pieces, grout, backerboard, thinset and installation tools All online orders for this item ship via common carrier or parcel ground and may arrive in multiple boxes It is recommended you purchase a minimum of 10% overage to account for design cuts and patterns This is a GREENGUARD Indoor Air Quality Certified and GREENGUARD Children and Schools Certified product A one-year limited warranty is provided on flooring and surfacing products manufactured or distributed by MSI within the limitations explicitly outlined in the warranty statement Features Tile Material Porcelain Water Protection Waterproof Color Family Gray Mosaic Pattern Brick Joint Application Location Floor and Wall Flooring Product Type Porcelain Tile Commercial / Residential Commercial / Residential Tile Features Frost Resistant,Radiant/Underfloor Warming Heating,Water Resistant,Waterproof Returnable 180-Day Color/Finish Barnwood Cognac Break Strength (lb.) 300 Indoor/Outdoor Indoor,Outdoor Tile Format Large Format Number of Tiles per Case 7 Location Backsplash,Bathroom,Fireplace,Floor,Garage,Kitchen,Shower Edge Type Flat Style Farmhouse,Modern,Rustic DCOF Rating Not Tested Flooring Look Wood Look Installation Method Mortar Tile Finish Matte Approximate Tile Size 8x36 Product Length (in.) 36 Product Thickness (mm) 10 Suggested Grout Line Size 1/8 Product Width (in.) 8 in Manufacturer Warranty One-Year Limited Warranty
Specifications Dimensions Size 12 x 72 Product Length (inches) 11.80 Product Width (inches) 70.80 Product Thickness 8.5mm Box Length 71.06 Box Width 12 Box Weight 48.19 lbs Box Quantity 2 Coverage (sqft/pc) 5.81 PEI Rating P.E.I. rating measures Tile design durability from 1-5: P.E.I. of 3 & above is suitable for home use P.E.I. of 5 is suitable for commercial & high traffic areas 4 DCOF Value The Dynamic Coefficient of Friction is a rating of the slip resistance of a floor. It is a measurement of how much friction there is on a floor when walked upon. The higher the number, the more slip resistant. >=.42 Water Absorption Though absorption rate may vary, product rated greater than 0.5% is not recommended for outdoor installation, but can be used indoors. All tile is recommended for interior use. Less than 0.50 percent Details Material Porcelain Color Brown Edge Edge-style affects both appearance & ease of installation like: Pressed (rounded edge) Chiseled (rustic look) Rectified (straight edge/smallest grout line) Straight or Rectified Finish Matte Look We have options of Tile to match your style. Choose from: Linen, Contemporary, Rectangular, Polished, Slate, Pattern, Stone Look & Wood Look. Wood Look Body Color Through-body: The pattern or color is permeated throughout the entire body of the tile, thus reducing the visibility of dents and chips. Color-body: The body features the most predominate color found in the tile, and the surface showcases the pattern and color. Double-loaded: Porcelain tile that is produced with two layers of porcelain pressed together before it’s fired in the kiln. Standard Body: The raw material used to create this tile is not colored to match the graphics on the surface of the Tile. The body color of the material is indicative of the country of origin’s raw materials. Standard Body Water Resistance Waterproof and water-resistant designations refer to the product’s ability to withstand moisture and spills. Waterproof or water-resistant tile is suitable for all rooms in the house including kitchens, basements, and bathrooms. Some tile requires sealing during the installation process in order to withstand exposure to water. All tile must be installed properly for these conditions to be met. Waterproof Frost Resistance Tile's ability to withstand freeze-thaw cycles when directly exposed to the elements. Frost Resistant Print Quality Print quality on Tile varies from: Ink Jet (highest definition/most realistic) Roto Color (better quality/realistic) Screen Printing (good quality/each tile is identical with no variation) Inkjet 50% More Slip Resistant 50% more slip resistant tiles give a result of 0.63 or greater for the Dynamic Coefficient of Friction (DCOF) test. The most common industry reference for the DCOF test is to 0.42 as the ANSI standard for use on wet surfaces. This tile has a DCOF 50% greater than this standard. Yes Durable Tile is a strong and reliable option for anywhere in the home. See the PEI rating for the exact level of durability and hardness. Yes Country of Origin Direct from the four corners of the globe to bring better products & prices to you. Italy Installation & Warranty Suggested Grout Line Size The recommended grout line thickness for best results in a tile installation. 1/16, 1/8, or 3/16 Installation Type Grout & Mortar Placement Location Indoor/ Outdoor Installation Options The surface for which the product can be installed upon. The surface should be clean, stable, and meet installation and warranty guidelines prior to installation. Floor/Wall Shower Surface Suitable for Shower Floors Shower Surface Suitable for Shower Walls Pool Surface This product is approved for use on the surface surrounding a pool. Pool Decks No Demolition No need for demolition, as this product can be easily installed over existing tile and subfloors. No Radiant Heat Compatible This states whether a product is compatible for use with radiant heat kits. See installation instructions and warranty for more details. Yes Floor Suitability Rating Light Residential : Suitable for wall applications or areas with light foot traffic such as powder rooms or guest rooms. • Comparable to PEI 1 & 2 All Residential / Light Commercial : Suitable for use in regularly trafficked residential areas such as kitchens, hallways, bedrooms, and laundry rooms. Light commercial areas with limited traffic, such as offices and retail shops, are acceptable. • Comparable to PEI 3 All Residential / All Commercial : Suitable for use in heavily trafficked residential and commercial areas, such as foyers, living rooms, lobbies, hospitals, and airports. • Comparable to PEI 4 & 5 All Residential/ All Commercial Bathroom Floor Use Suitable for Bathroom Floor Show More Product Details This brown matte Durango Walnut Wood Plank Porcelain Tile is 12 x 72. Inkjet technology offers a wider range of color, finer details, and more variation in the design for a wood-look that has more character and authenticity on the tile itself. This tile was designed/manufactured in Italy, long-known as the home of design. Italian designers are industry leaders in style and creativity, and Italian factories maintain a reputation for high-quality products. The look of wood with the worry-free nature of tile is sure to be the perfect touch for your home. The Durango Walnut Wood Plank Porcelain Tile will add a unique touch to any room or project. Everything from the edges to the printed design of the tile can complete the look of your room, and you get can get the added benefit of durability, too. Not only does porcelain wood-look tile have the dimension and variety of the rich colors of authentic wood, it’s also durable and easy to maintain. The P.E.I. scale measures a tile’s ability to withstand foot traffic on a scale of 1-5. This tile’s durability has a P.E.I. rating of 4. With this rating, this tile can withstand moderate to heavy traffic. It’s suitable for all residential and medium-traffic commercial floors or wall applications. This tile is 50% more slip resistant when compared to ordinary tile that has a DCOF less than or equal to 0.42
Buy Parquet wood effect porcelain tile plank style in 280x70mm at Tile Experience. Order free sample next day delivery. Other tiling accessories available
Browse our selection of wood effect porcelain tiles. Wood effect porcelain tiles perfect for kitchens, bathrooms and living areas. Order your free samples