VAG SSP 272. This Self-Study Programme covers the design and function of the onboard power supply, that is, the power and data management of the Phaeton. The onboard power supply of vehicles in the early 1950s consisted of approx. 30 m of cables, some switches, lights and the ignition system. The further…
Features1. Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility2. Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal4. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch9. 3 LEDs for indicating the power and transceiver status10. High quality USB-B and RS232 connectors, smoothly plug/pull11. Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to installSpecifications1. Product type: Industrial grade digital isolated converter2. Operating system: for Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 73. Operating temperature: -15℃ ~ 70℃4. Device port: RS232/485/422/TTL5. Host port: USB6. USB:- Operating voltage: 5V- Connector: USB-B- Protection: 200mA self-recovery fuse, isolated output7. RS232:- Connector: DB9 male- Protection: TVS diode, surge protection & ESD protection- Transmission mode: Point-to-point- Baud rate: 300bps ~ 3Mbps8. RS485/422:- Connector: Screw terminal- Direction control: Hardware automatic control- Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper)- Transmission mode: Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more； 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)- Baud rate: 300bps ~ 3Mbps9. TTL (UART):- Connector: Screw terminal- Pins: TXD, RXD, GND, 5V/3.3V- Protection: Clamp protection diode, over-voltage/negative-voltage proof, shock resistance- Transmission mode: Point-to-point- Baud rate: 300bps ~ 3Mbps10. Indicators:- PWR: Red power indicator, light up when there is USB connection and voltage is detected- TXD: TX indicator, light up when the USB port sends data- RXD: RX indicator, light up when the device ports send data back11. Package contents:- USB TO RS232/485/TTL x1- USB cable x1
Solar-powered, Maintenance-free Satellite Tracker. Iridium Edge Solar with solar connectivity, displaying Live Positions in Falcon Mega Track (Vessel Tracking Platform)
PRICES MAY VARY. Meet the GENPRO10X4 - Similar to our GEN4, only better. It's 10% smaller and delivers 33% more power. It's one of the best performing onboard marine battery chargers we have ever made. Multiple banks - A four-bank onboard battery charger rated a 40-amps - 10-amps per bank - for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Charging modes - Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries. Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates. Charge dead batteries - Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts. Redefined mounting - A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise. Designed for water - A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater. What's in the box - GENPRO10X4 40-amp 4-bank waterproof onboard marine battery chargers (120-240VAC) with a 72-Inch DC cables with 3/8-inch eyelets and a 72-inch Type-B AC cable, (2) self-tapping mounting screws, user guide, and 3-year warranty.
VAG SSP 990403 - The 2012 Audi A7 Onboard Power Supply and Networking
Apple is set to reveal its answer to the artificial intelligence (AI) wildfire that’s sweeping the technology sector: Apple Intelligence.
Devices that can make wireless connections even without an onboard battery could spread computing power into everything you own.
Save precious battery power with a Starlink 12V conversion. We'll guide you through the steps needed to power your Starlink more efficiently.
Vocal Multi-effects Plug-in with 5 Vocal Engines, 7 Stompbox-style Effects, Voice Generation, and Presets - Mac/PC AAX Native, RTAS, AudioSuite, VST2, VST3, AU
Features1. Adopt original FT232RNL chip, fast communicating, stable and reliable, better compatibility2. Supports multiple communication interface conversion: USB to RS232, USB to RS485, USB to RS422, USB to TTL3. Onboard unibody power supply isolation, provides stable isolated voltage, needs no extra power supply for the isolated terminal4. Onboard unibody digital isolation, allows signal isolation, high reliability, strong anti-interference, low power consumption5. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightningproof & ESD protection6. Onboard self-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance7. Fully automatic transceiver circuit with no delay, ensures the USB port communicates with different interfaces fastly and stably, without interfering with each other8. Onboard TTL serial 3.3V/5V voltage translator, config the TTL level via switch9. 3 LEDs for indicating the power and transceiver status10. High quality USB-B and RS232 connectors, smoothly plug/pull11. Industrial grade metal case, supports wall-mount and rail-mount installations, solid and beautiful, easy to installSpecifications1. Product type: Industrial grade digital isolated converter2. Operating system: for Mac, Linux, Android, Windows 11 / 10 / 8.1 / 8 / 73. Operating temperature: -15℃ ~ 70℃4. Device port: RS232/485/422/TTL5. Host port: USB6. USB:- Operating voltage: 5V- Connector: USB-B- Protection: 200mA self-recovery fuse, isolated output7. RS232:- Connector: DB9 male- Protection: TVS diode, surge protection & ESD protection- Transmission mode: Point-to-point- Baud rate: 300bps ~ 3Mbps8. RS485/422:- Connector: Screw terminal- Direction control: Hardware automatic control- Protection: 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper)- Transmission mode: Point-to-multipoints (485 mode: up to 32 nodes, it is recommended to use repeaters for 16 nodes or more； 422 mode: up to 256 nodes, it is recommended to use repeaters for 16 nodes or more)- Baud rate: 300bps ~ 3Mbps9. TTL (UART):- Connector: Screw terminal- Pins: TXD, RXD, GND, 5V/3.3V- Protection: Clamp protection diode, over-voltage/negative-voltage proof, shock resistance- Transmission mode: Point-to-point- Baud rate: 300bps ~ 3Mbps10. Indicators:- PWR: Red power indicator, light up when there is USB connection and voltage is detected- TXD: TX indicator, light up when the USB port sends data- RXD: RX indicator, light up when the device ports send data back11. Package contents:- USB TO RS232/485/TTL x1- USB cable x1
Learn the best techniques for charging lead acid, AGM, gel, and lithium marine batteries. Choose the right charger and use proper methods to ensure reliable power and extend battery life. Prevent overcharging and maintain your battery's health with regular maintenance.
Marine Insight - The maritime industry guide.
Product Description Brand: ACEIRMC Color: Micro Features: This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX. 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0); 1 analog input(3.2V max input). Micro USB connection; Compatible with Arduino; 1MB Flash; 500mA resettable fuse. WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard. Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE. ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F Details: Product Specification: Main Chip: ESP8266 CH340G. WIFI Development Board, 4M bytes. supported (except D0). Support OTA on line. 1 Micro USB connection. 1 analog input (3.3V max input). 5V 1A switching power supply onboard. 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire and a micro-USB connection. How to get it started in for Arduino: – Setup driver Before you use mini D1 boards, you need set up CH340g driver. – Python On Windows you need install Python 2.7.10. On Linux & MAC OSX, you don’t need install it, comes preinstalled with OS. – Installing Hardware package “Boards Manager or GIT”. We recommend using GIT, you can always get the latest version. Package Includes: 5 x D1 Mini NodeMcu Lua WLAN WIFI Internet Development Board Package Dimensions: 23x123x41 UPC: 701715431645 Department: Personal Computer Tags: ACEIRMC Micro Personal Computer
Military operations involving accidental detonation of onboard marine weapons, military personnel, ICD-10: Y37.050. Symptoms, Chapter, Cases. Military Operations Involving Accidental Detonation of Onboard Marine Weapons and Military Personnel Marine ve...
PRICES MAY VARY. Meet the GENPRO10X3 - Similar to our GEN3, only better. It's 27% smaller and delivers 33% more power. It's one of the best performing onboard marine battery chargers we have ever made. Multiple banks - A three-bank onboard battery charger rated a 30-amps - 10-amps per bank - for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries. Charging modes - Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries. Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates. Charge dead batteries - Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts. Redefined mounting - A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise. Designed for water - A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater. What's in the box - GENPRO10X3 30-amp 3-bank waterproof onboard marine battery chargers (120-240VAC) with a 72-Inch DC cables with 3/8-inch eyelets and a 72-inch Type-B AC cable, (2) self-tapping mounting screws, user guide, and 3-year warranty.
VAG SSP 61. The first part of this self study programme summarises the onboard power supply of the Audi A3 ’13 and provides information on the functions, installation locations and specific features of numerous control units. Whether the engine fuel system, the dual clutch gearbox, the infotainment system or any…
