Foldy is a minimalist tray series designed by San Francisco and Seoul-based studio SFSO
This is a small metal snow boarder made out of recycled metal pieces. As multiples are made and due to the nature of welding some slight variations may exist in position of the figure. Size: 4.25in Length x 1 in Width x 5 inches high
Single small metal flower made of recycled metal. These make great gifts, and are very low maintenance, no water, no light, no dirt required...and they will never wilt. Size: 2 in x 2 in x 5 in
Basic Silver Soldering With Strong Joints: In this Instructable, I'll show you the absolute basics for making silver-soldered joints that are simple, and structural. To accomplish this, these are the MAIN tools and supplies needed: Harris Safety-Silv 56% Harris Stay-Silv Flux Mapp Gas T…
A collection of unique and awesome sculptures by Brain Marshall.
Steel Sheet Metal Flower: This is a simple metal rose or some type of flower that I made with some spare sheet metal. Took a while to make but that was mainly due to the fact that I only had a small tin snips and I had to cut each petal and leaf by hand... Also it takes some…
Foldy is a minimalist tray series designed by San Francisco and Seoul-based studio SFSO
Afmeting is ca. 24 x 23 x 14 cm (hoogte x lengte x breedte) Gewicht is ca. 3,5 kg ■ Het is gemaakt van gerecycled metaal, nutteloze auto-onderdelen en machine. ■ Coating door lak, beschermen tegen "Roest". Bedankt voor uw bezoek. Als u vragen heeft, neem dan gerust contact met ons op via e-mail of Convos. ■ Neem voordat u dit artikel koopt eerst contact met ons op om onze voorraad te controleren. ■ We verzenden via UPS of FedEx, de levertijd is 5-7 dagen. ------------------------------------------------------------------------ ▸▸▸Disclaimer◂◂◂ Het werkelijke model kan afwijken van de getoonde afbeelding, specificaties kunnen variëren en kunnen zonder voorafgaande kennisgeving worden gewijzigd. ( Hierdoor is handgemaakt en afhankelijk van gerecyclede metalen materialen. )
Emerson Bianchin uses scrap pieces such as keys, bearings, and plumbing fixtures to create his miniature motorcycles. In describing his work, Emerson notes that a piece often begins with a single component, upon which he builds a matrix, eventually bringing the motorcycle to completion.
The adaptability of the less than $10 'clock kit' means that anything can become a clock, from a
Afmeting is ca. 24 x 23 x 14 cm (hoogte x lengte x breedte) Gewicht is ca. 3,5 kg ■ Het is gemaakt van gerecycled metaal, nutteloze auto-onderdelen en machine. ■ Coating door lak, beschermen tegen "Roest". Bedankt voor uw bezoek. Als u vragen heeft, neem dan gerust contact met ons op via e-mail of Convos. ■ Neem voordat u dit artikel koopt eerst contact met ons op om onze voorraad te controleren. ■ We verzenden via UPS of FedEx, de levertijd is 5-7 dagen. ------------------------------------------------------------------------ ▸▸▸Disclaimer◂◂◂ Het werkelijke model kan afwijken van de getoonde afbeelding, specificaties kunnen variëren en kunnen zonder voorafgaande kennisgeving worden gewijzigd. ( Hierdoor is handgemaakt en afhankelijk van gerecyclede metalen materialen. )
This welded slinky-style dog is made from a spring, nuts, bolts, washers, and threaded metal rod. As cute as it is, remember it's a piece of art, not a toy. Not recommended for kids; if the spring is "boinged" or twisted too much, it will break. Since each dog is made by hand, no two are exactly alike. However, they are all materially similar. They have a clear powder coat finish. Free ground shipping is included. This dog's big brother/sister/parent is also available...with a whole lot more mass (see photo for comparison). See the associated listing in our Etsy shop. You can buy both together and save $15 with the combo listing.
Order today and we will ship out the next business day. Thank you for supporting our small business. Its amazing how much we throw away that still has a useful life. Taking old metal utensils, golf clubs, tools and odds & ends, Jim welds a creative creature or art piece to use in the garden. This cat is unique in size but usually is 14”long by 12" tall. A great gift for a cat or animal lover. We ship out next business day after order is placed. Shipping times vary by location but usually take between 2-7 business days via USPS or Fedex. If you should want 2 items from our shop please email us so we can combine shipping and save you a little money. Shipping prices vary depending on what you order.
The bedside table Reflex consists of a circular top and a metal base. It proposes a visual play between two geometries.
rusty and patina......anything!!! Instructions below. instructions: (these look long, but it is really easy.... just long to write) Needed: vinegar, white or apple cider salt, just regular old salt out of my shaker. For small items. I fill a quart yogurt container half full of vinegar, and sprinkle in some salt. (not measured, but guess 1 tsp.??) dump your keys, clips, hinges, watch parts, locks... any metal you want to 'age'. I leave them over night, just 'cause it is convenient. In morning, I take them out with my tongs (used only for this), and put them on newspaper. (you can try a couple hours if in hurry) I leave them there for the day...again just because it is easy. (the newspaper does not do anything special, just keeps mess from getting on anything else. =) Check to see how they are doing. If not rusty or blue enough put them in again. same process,and keep doing that till they are color or degree you want. (you will see they continue to rust while even sitting out.) The vinegar works to cut through the surface of the metal, and the air oxidizes it. PLEASE NOTE: Different metals react differently. Thus, some rust, some patina blue. Brass is metal that turns blue. When they are rusty enough, I rinse with water. (to rinse I have another yogurt container with small holes poked in bottom. I put them in there, run water over it and then shake water out). Then dry with a rag.. If you will be handling them a lot I suggest spraying them with clear sealer, but I have not done that yet. A little rust never hurt me....=) I use the same vinegar for weeks.... just add more salt all the time. You can also sprinkle items with salt while on newspaper. gives them a sort of splotchy look. NOTE: some metals take longer to break through surface. Be patient. if you do it enough times, almost anything will rust. *Galvanized metal does not rust but this will cause a dull surface. I pick up any little metal things at garage sales, and rust it all!! so fun to use on collages, place in bowl as conversation piece. Use old rusty clips to hold art..... Now, show me what you rusted and I will do a post on it. Blessings barbara jean
“Chick“ is Maria Rästa Design`s signature item that have been acknowledged internationally and participated in many Estonian design exhibitions around the world. “Chick“ is an interior accessory that stands out with its playful design. “Chick” is mainly used as a small side table near sofa or a bedside stand, as a footrest of an armchair, or flowers and plants stand. But in addition it has an extra function – to bring a smile to your face! NB! When purchasing please add your phone number, it`s required by the post services. Please add the number as a note to seller. Thank you! Dimensions: Width 410 mm/ 16,14 inches Depth 240 mm/ 9,45 inches Height 360 mm/ 14,17 inches Materials: glue-laminated birch, mahogany, metal * Natural wood, light color difference and light knots may occur Wooden parts are lacquered, metal parts are painted black * Light pattern of the wood grain may be seen through paint Ships to: everywhere, shipping price varies.
A tranquil friend, this steel cow sculpture will bring you the peace of a rolling green pasture. It is a stately rust, metal cow that can sit handsomely on your entry table or on your fireplace mantle. It would make a very special gift for your farmhouse loving friend. This cow sculpture is handmade in rural Pennsylvania with reclaimed metal. The pattern is drawn on the metal with soapstone, cut with a hand-held plasma cutter, hand-shaped and arc welded together. Each piece will have its own subtle differences; they are cut, hammered, and built by hand. The weathered steel has its own imperfections. No two pieces of metal will wear alike. A clear finish is applied to the entire piece. Care: Wipe clean with a damp cloth. If outdoors, you can maintain a shiny look (optional) by applying a clear, metal enamel, available in a spray can at your local hardware store.
Length 95 width 85 height 55 mm Steampunk fun. Please note that this product is a finished product that has been assembled. These structures are exquisitely filled with cyborg-inspired mechanical insects. These mechanical insects are handmade using miniature gears and metal parts. The stance of the bug is fixed, but legs can be bent with care* to slightly alter their stance to your liking. Perfect for gifts for any occasion or just for your own collectable decoration :) It is a handmade item, so each one is unique and may be just slightly different. If you have any questions or concerns, feel free to send me a message. It is a perfect gift for your friend to put on the bookshelf or just for your own collectable decoration,I think maybe your boyfriend or husband will like this gift.Its delicacy as a birthday present for your son or your father may surprise them and make them unique. Need to pay attention to:please don’t leave children unattended with these because is NOT a toy and small parts are hazardous to children.Some parts maybe sharp and/or pointy,Handle with care!!
Introducing KLARA - a modern DIY candle holder, designed for satisfying and effortless assembly. This sleek item is delivered in a convenient flat state, and with just four simple folds made by hand, you can transform the metal sheet into a sophisticated, urban-inspired candle holder – no tools required! Elevate the ambiance of your living room, bedroom, or dining table with this stunning piece. The candle holder perfectly accommodates standard tealight candles. Perfect as a gift for foreign guests or as an Israeli souvenir to take abroad, this original local item occupies minimal space in a handbag. Package size: 302X71X5 mm / 11.8X 2.7X0.2 Inches. Flat state size: 292X61X1.25 mm /11.4X2.4X0.05 Inches. Folded candle holder size: 65X63X61 mm/2.5X2.4"X2.6 Inches. Material: brushed stainless steel with a handmade finish. Wax removal: Hold the candle holder over the sink and pour boiling water on it until the wax totally disappears. For indoor use only.
Side and accent tables are versatile work horses that can be put into good use in just about any room. Place them next to the sofa and use them for storing magazines or displaying décor or use them as tiny coffee tables if space is scarce.
Details This delightfully romantic sculpture is from Armando Ramirez in Mexico, who uses recycled auto parts and scrap metal to create unique sculptures. Crafted from metal rod, screws, nuts and other parts, the sculpture depicts a couple on a park bench just about to share that first kiss. 0.48 kgs 1.1 lbs 24 cm H x 13 cm W x 12 cm D 9.5" H x 5" W x 4.7" D Metric US/Imperial Recycled auto parts, scrap metal Features a rustic, rugged finish Each work is unique. Recycled parts will vary from piece to piece based on availability. Promotes recycling and reduces waste Made in Mexico. Certified and shipped by our office in Mexico Gift Info Email this item in advance of a gift. Email this item as a gift suggestion. Free Gift Wrap? No Premium Gift Wrap? No
Near the end of the nineteenth century, Scottish scientist Sir James Dewar developed glass vacuum bottle technology for his work with liquid gases. The bottle had a function applicable to daily life as well--keeping beverages fresh, meeting a basic need as more people joined the work force, taking meals to their jobs. More people were
see more items at www.junkmetalartist.com