Navigating the Shift: Embracing Glocalization and Emerging Technologies, from globalization to glocalization, digital to project economy changes
Peloton will, once again, have to fight its way back in the leading pack of at-home cycling offerings.
Bist Du auf der Suche nach einem neuen Racket? Ich helfe Dir gern dabei, um beim Tennis Schläger kaufen die richtige Auswahl zu treffen.
Textiles Mills shift to recycled polyester fibre in north India; prices go up 13 Jun '22 3 min read Pic: 123rf.com Prices of recycled polyester fibre (PET bottle fibre) increased to ₹102 per kg as more spinning mills shifted to cheaper recycled polyester fibre. However, the prices of recycled yarn in Panipat witnessed downtrend today due to excessive supply and lower demand. Cotton comber also took a dip in prices. But cotton yarn rates remained stable.According to traders, payment crisis is also looming in north India’s cotton yarn market because sluggish demand disrupted payment cycle. The payment crunch is also affecting buying capacity of consumer industries. A Ludhiana-based trader told Fibre2Fashion, “Demand did not see any sign of improvement. Payment situation also tightened due to sluggish demand. Weak demand may persist as large stocks are lying with garment manufacturers.” In Ludhiana, 30 count cotton combed yarn was sold at ₹420-425 per kg (GST inclusive), according to Fibre2Fashion’s market insight tool TexPro. 20 and 25 count combed yarn were traded at ₹410-415 per kg and ₹415-420 per kg respectively. Carded yarn of 30 count was quoted at ₹360-365 per kg.Delhi market also noted stable trend due to slower buying. According to traders, there was limited buying as weaving segment did not expect much demand from garment units. Weaving industry is very cautious for fresh buying. In Delhi, 30 count combed yarn was traded at ₹400-410 per kg (GST extra), 40 count combed at ₹440-455 per kg, 30 count carded at ₹360-365 per kg and 40 count carded at ₹400-405 per kg.Prices of recycled polyester fibre (PET bottle fibre) increased to ₹102 per kg as more spinning mills shifted to cheaper recycled polyester fibre. However, the prices of recycled yarn in Panipat witnessed downtrend today due to excessive supply and lower demand. Cotton comber also took a dip in prices. But cotton yarn rates remained stable.#Panipat market noted downtrend in recycled yarn prices. Poor demand and higher production led to downfall in few varieties of yarn. 20s recycled PC yarn (coloured - high quality) dropped ₹15 per kg, while10s recycled (white) yarn slipped ₹3 per kg. According to a local trader, Preetam Singh Sachdeva, large number of mills have shifted to recycled yarn as they wanted to produce yarn made from cheaper raw material. Therefore, higher supply and poor demand caused for decline in recycled yarn prices. However, better demand for cheaper raw material pushed up upstream product. Recycled polyester fibre (PET bottle fibre) jumped from ₹95 to ₹102 per kg.In Panipat market, 10s recycled yarn (white) was traded at ₹92-105 per kg (excluding GST), 10s recycled yarn (coloured - high quality) at ₹140-145 per kg, 10s recycled yarn (coloured - low quality) at ₹95-105 per kg and 20s recycled high quality PC yarn (coloured) at ₹170-180 per kg. 10s optical yarn was traded at ₹125-130 per kg in the market. Comber came down to 140 per kg after downfall in cotton prices.Meanwhile, cotton prices eased in north India after gains in previous sessions. Cotton arrival was mere 300 bales of 170 kg. However, demand was very week as spinning mills have shifted to polyester yarn to avoid costlier cotton. Cotton was sold at ₹10,400-10,700 per maund of 37.2 kg in Bathinda, ₹9,600-10600 in Hissar, and ₹10,500-10,800 in Sriganganagar market. Fibre2Fashion News Desk (KUL) More Textiles News - India...
Summary Cheat Sheets Study Guides for Organic Chemistry 1 and 2. Comprehensive, beautifully crafted powerful summary cheat sheets in high-resolution PDF.
Wilson Shift 99L v1 Tennis Racquet Achieve the ultimate combination of spin and power with the Wilson Shift 99L V1 Tennis Racket. Ideal for intermediate to advanced, all-around players who prefer a slightly lighter frame, the Shift 99L has an innovative string pattern and bending profile built to be stable, yet laterally flexible for controllable power and devastating spin. A first of its kind, the Shift V1 collection was built and refined via player feedback from all over the world. Add in the plant-based materials used throughout the end cap and bumper, this racket will bring your game to the next level.W|Labs innovation team's patent pending technology that utilized computer aided design software to create specific geometry that maximizes lateral bending without losing any torsional stability.Shift Benefit: Modern Spin and Comfort16x20 String Pattern: Slightly larger string pattern provides balance between control, spin, and powerComposition: Innovative geometry allows racket to bend in a way that generates ultimate comfort and keep more balls in the courtReduced Environmental Footprint: End-cap, bumper composed of Agiplast, plant-based materialsFinalized Product: Built and refined using feedback from players worldwideDesign: Artic-prism design produces a clean, modern look that compliments its revolutionary technologies Recommended for players: Player for Spin, Power and Control Strung Specifications Head Size: 99 sq. in Length: 27 inches Weight: Strung - 10.7oz / 303 g Unstrung - 10.1oz / 285 g Balance: 5 Points Head Light Beam Width: 23.5mm Composition: High Performance Carbon Fiber Stiffness 67 String Pattern: 16 Mains / 20 Crosses Power Level: Medium Swing Speed: Fast Long Swing Swing Weight: 311 Tension: 45-60Pounds Grip Type: Wilson Pro Performance Item# WR145511U
EDM artist Ghastly looks as normal as you or I when spinning house beats and future bass, but shifts into his evolved form, GHENGAR, to drop heavy bass & deathcore. Embrace the darkness, embrace the bass, with this GHENGAR-inspired decoration***. This home-made item is 3D printed, handcrafted, and lit from within by color changing LEDs, which are controlled by remote. Can be used as a totem at a show, as tasteful decor, or to simply haunt your nightmares. Comes with or without severed head inside, suspensed from three chains, choose whichever you prefer! ***This is a decoration and not a wearable mask (yet). Wearable version that allows vision, coming soon! *** 3D Model comes courtesy of Ceredir Cosplay, check out their shop here: https://www.etsy.com/listing/1445358256/ghengar-black-tiger-sex-machine-mask-3d?click_key=48e528575d6f072c28aa900570e401ba2658478c%3A1445358256&click_sum=8be7f7cf&ref=shop_home_active_30&sts=1 *** If Your Grace needs this item for a specific day or event, please send a Raven after completing your order. The KingMaker will make every effort to ship the item in time for the coronation, but communication is Key *** And go find the real GHENGAR, before he finds YOU: https://open.spotify.com/artist/6g6OqIpMMbEkhhtEODZaGf?si=g2T0Yt89RgmuCUqgx3bNug http://ghastly.co/
In this episode, Sasha suggests a small shift in how you think about fiber that can really help your spinning. You can find the transcript for this episode HERE . Mentioned in the episode: Episode 44: Meet the Down (And Down-like) Breeds Episode 9: Breed Spotlight: Rambouil
Confused by spin resistance, RPMs, or how exactly to set up your bike? Allow the experts to explain how to ace your next 45 minutes on the bike.
As another academic year drew to a close at Bentley University, the campus buzzed with excitement, hosting an event that was as educational as it was thrilling. This year's end-of-semester celebration was not just a party; it was a showcase of innovation, blending art, science, and sheer excitement in a multi-sensory experience.
Ich habe den Spin des Wilson Shift 99 V1 in einem Schläger Test intensiv auf den Prüfstand gestellt. Kann er dem Pure Aero Konkurrenz machen?
This funny medical enamel pin shows what can go wrong within your shift! Will you be tired, short-staffed, or *gasp* 0% caffeinated. Take your chance by spinning this wheel to see what will go wrong today! This a 1.25 inch pin with a rubber backing. Colors may vary from digital image. The arrow SPINS
Lightest version in the Shift collection that uses revolutionary bending technology to generate heavy spin with unmatched comfort.
Smart Spin is the rotating refrigerator organiser, that makes it fast & easy to see, find, and select exactly what you’re looking for, with just a spin! Smart Spin's
Textiles | Positivity in north Indian cotton yarn market as ex-factory rates up 14 Sep '23 3 min read Pic: Shutterstock.com
(Phys.Org) Over the past few decades, tornadoes have been shifting—decreasing in Oklahoma, Texas and Kansas but spinning up more in states along the
You may have noticed that things feel slightly different. They may even look a bit different. There has been a subtle but distinct shift.
"Shop GONGE Carousel at Michaels. com. The exciting Carousel gives children a real spin! The seat is angled so that a child can propel the Carousel by shifting the body’s center of gravity, although younger children may find it easier to push off with their feet. The exciting Carousel gives children a real spin! The seat is angled so that a child can propel the Carousel by shifting the body’s center of gravity, although younger children may find it easier to push off with their feet. Playing with the Carousel develops muscle integration, as well as strengthening them, and helps stimulate the vestibular sense in combination with sight to improve balance. The solid and stable metal base with rubber feet ensures safe spinning of the Carousel, and the seat’s thick edge is easy to hold on to when in motion. Details: Red 22.05\" x 22.05\" x 9.84\" Weight Capacity: 110.2 lbs. Angled seat Solid metal base with rubber feet | GONGE Carousel in Red | 22.05\" x 22.05\" | Michaels®"
As a preface, this blog post has been several months in the making and is one of my longer blog posts. I talk about my experiments, mistakes and learning process in perfecting my technique for spinning chiengora. If you’re just a little bit curious about how to spin dog hair, I've made a short video that summarises my final, start to finish process for spinning dog hair here - If you’d like to learn more, read on... Spinning Chiengora As a spinner, I love trying out new or unusual fibres, and one fibre I've been very intrigued by is dog hair or chiengora (so-called because of its similarity in appearance and texture to angora). There are usually one of three reactions when someone mentions spinning dog hair. People are either repulsed at the thought of wearing something that might smell of wet dog, they just think it’s extremely weird, or they love the idea of having a memento that is made purely out of the fur of their beloved pet. Spinning dog hair is certainly not a recent fad. Items dating back to pre-historic Scandinavia were found to be made from dog hair, and dogs were the main providers of protein fibres to the Native American Navajos before sheep were introduced to the continent. The best dogs for providing fibre for spinning are long-haired, double-coated dogs that have definite shedding phases, when they primarily shed their undercoat. Anyone that has ever owned a double-coated dog knows that underneath the stiff, wiry guard hairs, lie much softer, finer, downy undercoat hairs. It's these finer, hidden hairs that are just perfect for spinning into a luxurious yarn. If you had the dog, the opportunity and the skill, why would you not turn the shed hair into an extremely warm, luxurious yarn, instead of throwing it away? Popular dogs for spinning into yarn are:- Samoyed Siberian Husky Alaskan Malamute Great Pyrenees German Shepherd Dog Norwegian Elkhound Newfoundland Chow chow Old English Sheepdog Bernese Mountain Dog Golden Retriever Collie This is actually my second attempt at writing a blog post about my experience spinning dog hair, but my original post started to turn into more of a - how not to harvest dog hair - that I decided to wait until an opportunity to spin a better source of chiengora fibre arose. If you're looking to spin your own dog's hair, I would highly recommend taking a look at a forum on Ravelry called - "Spinning Dog Fiber - aka Spinnin' Chien." I picked up a lot of tips on fibre preparation there and a lot of the information I'm sharing here came from the extremely helpful forum members there. Tips for harvesting and storing dog hair Dog hair for spinning should always come from brushings rather than clippings. Ideally, you just want to spin the finer undercoat, so clippings will always contain a lot more guard hairs. Cut ends can also add to the prickly nature of the yarn. If your dog sheds once or twice a year then the best undercoat fibres are brushed out at the beginning of the shedding, as fewer guard hairs are dropped at this stage. Don't be afraid to be selective about which brushings you keep and which you discard. It's much better to have a small amount of luxurious yarn than a large amount of mediocre, itchy yarn. Unfortunately, I don't have a dog myself, but many double-coated dog owners tell me that you get varying qualities of hair from different parts of the dog. Like a sheep or alpaca, you get much softer, finer hair from the back, neck and sides. The legs, tail and stomach yield shorter or coarser hair and so it's better to discard these hairs if you want a more luxurious, wearable yarn. Storing the fibres well is crucial. Make sure that whatever you keep the hair in is breathable - like a paper bag, cardboard box or old pillowcase. Try not to pack it in too tightly as this will increase the risk of it all matting together. --- My first (disappointing) attempt at spinning dog hair Five years ago, we were at a friends' house and I was admiring their pet cockapoo. I flippantly said that I would love to spin its fur - knowing nothing about spinning dog hair at the time. Well, a year later they confessed that they'd been saving all of their dog's hair - in the hope that I would spin some cockapoo yarn for their 13-year-old daughter to knit with. Cockapoo image from Wikipedia Bless them, they'd been diligently putting all the hair into little black dog-poo-bags and knotting them tightly when they were full. They'd tried to get as much as possible into the plastic bags to save space, so the hair was really well packed in. Having read a lot more about spinning dog hair since, I now know that keeping dog hair packed into a plastic bag for long periods of time is really not ideal as the hair can sweat and start to matt over time. Trust me, unwashed-year-old dog hair, kept in a plastic bag is particularly smelly! I also don't think that a cockapoo is the ideal dog for spinning. It's a cross between a cocker spaniel and a poodle and any dog crossed with a poodle is quite likely to be low shedding and single coated, so I was really not off to a good start. Well, I washed it, carded it and spun a knittable yarn, but it was quite clear that any yarn I produced was definitely going to be too itchy to wear. It was just too full of guard hairs and clipped ends that it felt more like string than yarn. I spun enough for our friends' daughter to knit a Christmas stocking for their dog and then disposed of the remaining dog hair as quickly as possible... --- My experience spinning Malamute Last year, a local lady posted on Ravelry, asking if anyone would be willing to spin some long-haired malamute fibre for her. After my failed attempt a few years ago, I really wanted to redeem myself, so I offered to spin a hundred grams or so for her - purely as a learning experience and to add a little variety to my own yarn stash. I told her to save just the brushings and to keep it stored in a breathable container. I now know that I should have also asked her to be a bit more selective about the fibres that she saved - but that was another lesson I learned! Well, she turned up at my door with two pillowcases full of soft, malamute hair. There were probably 500 grams in there - all from one season's shedding! As you can see, there is a real mixture of fibres in there. Just touching it, I could feel that it was so much softer than the cockapoo hair I'd spun previously, but at first glance you can see that there are also a lot of guard hairs in there. Underhairs come in a variety of shades and they're frequently a slightly different shade to the protective guard hairs. At first glance, it looked like these malamute guard hairs were mostly black, or white with black tips. I later learned that there were also a lot of white guard hairs in there as well. Sorting and washing the Malamute fibre I spent a couple of days sorting the dog fibres. I pulled out the darkest sections as these contained the most guard hairs. I also removed the shorter, coarser hairs, and sections that were overly matted or full of dander as these were not going to be pleasant to spin. I must admit to being quite ruthless, but I quickly learned (from colour, appearance and texture) which fibres were going to be the softest. I'm sure if I was a dog owner as well as a spinner, this process would be much easier as the fibres would be more efficiently sorted at the grooming stage. I also now know that it would be much better to save just the softer hairs from the first brushings - when the dog first begins to shed - as these contain fewer guard hairs. The malamute that donated the hair must have been very well looked after, as the hair was quite clean and smelled only slightly 'doggy'. I decided, however, to wash it anyway. Opening up the fibres as I went, I placed the lighter sections of fibre in a large delicates laundry bag, ready to be soaked. I was intrigued to see how well 'Soak', my favourite wool and delicates washing liquid, would clean the malamute fibres. Soak isn't necessarily recommended for washing pre-spun fibres, but I wanted to minimise agitation of the malamute - which could cause felting, so I thought it was worth a try. I made this animated gif to show just how much dirt came out of what I thought was pretty clean dog hair after three. thirty minute soaks and one rinse. This is the wet malamute fibres after they've been for a gentle spin in my washing machine at 400rpm for 15 minutes to remove a lot of the excess water. I love how you can see the bright whites and soft beiges more clearly now in the underhair. It's winter here in the UK and so I hung my bag of wet malamute fibres on a radiator, periodically checking it and fluffing the fibres out. It took about two days to completely dry. It hadn't been particularly dirty to start with, but now there wasn't the remotest smell of dogginess. A quite serendipitous thing happened too. As the underhairs are so fine and smooth, they became statically charged as they became dryer and dryer. I noticed that the very thickest guard hairs had started to fall out of the laundry bag of their own accord. These are just a few that I picked up off the bathroom floor. You can see here that there are a lot more white guard hairs in there than I anticipated. Shaking the bag repeatedly encouraged a lot more of the thicker guard hairs to either fall out of the laundry bag or just poke out, allowing me to remove them with a sticky lint roller. These are all of the sticky roller sheets I used on the outside of the laundry bag. Removing even more guard hairs When I first started reading the Spinnin' Chien forum, one member described a process of removing the guard hairs by placing the dog hair in a delicates laundry bag and putting them in the dryer with some pieces of foam and fleece. Initially, I thought this sounded quite risky and possibly fool-hardy, but as I could still see quite a lot of guard hairs amongst the fine downy malamute fibres I decided to take the risk. I keep guinea pigs, so I have a couple of densely woven laundry bags designed for washing guinea pig fleeces in to stop the hay and hair from clogging the washing machine. I put my delicates bag full of malamute fibres in my pet laundry bag and stuffed it full of foam offcuts. I zipped it up, crossed my fingers and put it in my dryer for 30 minutes on a gentle heat cycle. This is what the inside of the pet hair bag looked like when I removed it from the dryer. The inside, the foam pieces, and the delicates bag were all covered in guard hairs! I spent a good hour or so with my sticky roller, removing the guard hairs from the inside of the pet bag, the foam pieces and the outside of the delicates laundry bag. Thankfully the malamute fibres hadn't felted in the dryer and I had the softest mound of malamute fibres with just a few finer guard hairs left in. Unfortunately, at this stage it was very difficult to handle as it was so full of static charge that it wanted to cling to everything in sight! A quick spritz over the surface and then a gentle mixing with detangling spray dissipated the static charge straight away. It also made the fibres smell lovely! Spinning Malamute A lot of spinners of chiengora insist that the dog hairs need to be at least 1 and a half inches long. Most dog hair doesn't have the same crimp as wool, it's also slippier and so the shorter fibres have a tendency to shed from the yarn. It's not unusual for chiengora spinners to blend the dog hair with wool or alpaca to make it easier to spin, with less shedding, but the purist in me wanted to spin 100% malamute. Looking through my malamute fibres, I noticed a wide range of staple lengths and textures. Some were as long as three and a half inches, but most of them were between one and a half and two and a half inches. I knew that I was going to have to spin a much tighter yarn than I was used to, to ensure that the fibres held together well. In my first attempt at spinning malamute, I tried to hand-card the hair. Unfortunately the shorter, fluffier fibres rolled themselves into little neps, I eventually gave up on carding the dog hair and just fluffed it up and spun it from the cloud. A cloud of malamute fibre After consulting the members of the Spinnin' Chien forum, I was advised that my wool carders really weren't suitable for dog hair, and experienced chiengora spinners use cotton carders that have much finer, more densely spaced teeth. This was the first malamute yarn I spun. It's a 2ply, spun from the cloud. I was relatively pleased with it, but you can see that there are an awful lot of slubs in there, and as it's spun from the cloud, it's quite untidy and very much a woolen-spun yarn. I use an e-spinner, which doesn't really lend itself well to the stop-start and varying speeds required when spinning from the cloud, so next, I decided to attempt a more worsted-style fibre preparation. I wasn't about to invest in expensive equipment for what may be a one-off project, so I decided to try and build my own simple hackle out of inexpensive dog combs and a table clamp that I've had for decades. I managed to find three of these combination dog combs at Pets at Home. They were half price at £4.75 each. They have two densities of tines and the more closely spaced teeth are perfect for preparing my fine malamute fibres. I taped them together with double-sided sticky tape and then clamped them in my tabletop clamp with the finer teeth sticking out. I made a little 2 minute video to show my technique for aligning my malamute fibres to make a kind of lightweight top. Basically, I teased and opened up the malamute fibres, drafting them open with my right hand and then lowering them onto the dog combs with the more open fibres to the right of the teeth. Once my dog comb was half full, I carefully drafted out the fibres into a top, discarding the shortest and most knotted fibres that remained on the comb at the end. I then halved the length of fibres a couple of times so that I had a mix of long and short fibres on top of each other and then I drafted the four lengths into one length of fibres. Here are my sweet little nests of malamute fibre that are so much easier to spin on my Hansen Minispinner as they require far less effort to spin at a constant speed. There are still quite a few little neps in there, but you can see the fibres are now much more aligned. Spinning my prepared malamute fibre was so far more relaxing after it had been drafted out. I spun a high twist, fine single with the intention of chain plying it later. Please take a look at my video on pre-chain plying singles - Before plying I left my singles to rest for several days for the twist to relax a little so that it was easier to manage. Here are the first two malamute yarns that I spun. The top one is the very first yarn that I spun. It's a two-ply and was spun from the cloud. The bottom one is chain plied and was spun from drafted, combed fibres, prepared on my home made hackle. I love how much more definition the lower one has and I'm sure it would be much more comfortable to wear, having fewer guard hairs and less of a halo. I did actually spin a third yarn (the first in this picture) where I pulled out every guard hair by hand, but that was just too ridiculously labour intensive. I would not recommend it! As a thank you to the dog owner that provided me with the malamute hair, I knitted these little hearts that she could keep as a memento - along with enough yarn for her to knit herself some wrist-warmers or a hat. I've still got a lot of malamute left to spin for myself - maybe I'll try dyeing some next year. Chiengora is 80% warmer than sheep's wool so it'll be perfect for next winter's accessories! This blog post contains Amazon affiliate links to similar products that I purchased myself to prepare and spin the chiengora yarn. If you click through and purchase anything, I may receive a very small percentage of the purchase price. At this point, I normally suggest similar related blog posts, however, my list of spinning-related content is becoming a little unmanageable... If you'd like to read more blog posts about spinning and fibre preparation, please take a look at this page here where you will find links to all of my spinning and fibre articles. Thank you for reading, and happy spinning! If you enjoyed this, you might like to take a look at some of my other spinning-related blog posts - 9 Different Ways of Spinning a Multicoloured Blend While Trying to Avoid 'Spinning Mud' Spinning into Focus Chain-Plying at the Wheel Versus Making a Chain-Plied Ball Blending and Spinning a Rainbow Yarn 2 Ways How to Measure Handspun Yarn Using an App Free Handspun Yarn Labels DIY Hackle DIY Mini Wool Combs 3D Printed Modular Lazy Kate Yarn gauge reference tool for hand spinners Testing the Electric Eel Wheel Yarn Counter Prototype Hackle Blending a Long Gradient Linear Blending a Gradient Spinning Supercoil Yarn Using Waste Fibres Unbiased Review of the Daedalus Sparrow Testing the LWS Autowinder for the Electric Eel Wheel 6 ---------- Please be sweet and share the love. Leave a comment, subscribe to my YouTube channel, like my Facebook page for regular updates or follow me on Pinterest, Bloglovin' or Instagram
Smart Spin is the rotating refrigerator organiser, that makes it fast & easy to see, find, and select exactly what you’re looking for, with just a spin! Smart Spin's
Features%20and%20Benefits%3AStrong%20aluminum%20frame%20weighs%20only%208-1%2F2%20lbs.%20and%20enables%20you%20to%20move%2C%20spin%20and%20shift%20your%20leverage%20to%20different%20positionsAdjustable%20seat%20allows%20you%20to%20roll%20to%20move%20instead%20of%20crawling%20and%20bouncing%20on%20your%20kneesFeatures%203%20in.%20Polyurethane%20casters%20and%20tool%20trayThick%20foam%20kneepadsAdds%20speed%20and%20comfort%20to%20those%20tedious%20kneeling%20jobs%20The%20Racatac%20is%20an%20innovative%20kneeling%2Fsitting%20creeper%20that%20enables%20you%20to%20roll%20around%20and%20work%20in%20a%20one%20or%20two%20knee%20postion%20while%20taking%20pressure%20off%20of%20your%20knees%2C%20feet%20and%20back.
The shield that protects life and civilization from solar radiation is under attack from within. We can't prevent it, but we ought to prepare, argues Alanna Mitchell in an essay adapted from her new book, "The Spinning Magnet."
Buy GT//Rotors Five Piece Auto Parts Metal Key Chain Set - Spinning Turbo Keychain, Six Speed Manual Gearbox Keychain, Wheel Tire Rim Keychain, Red Brake Rotor Keychain, Silver Wrench Keychain: Shop top fashion brands Keychains at Amazon.com ✓ FREE DELIVERY and Returns possible on eligible purchases
It's a whatever shift I'm not on problem. This hard enamel pin is cast from silver nickel and filled with colored enamel with a spinning panel (one side says Dayshift, the other says Nightshift). Packed with a matching card and a cellophane sleeve - makes a great gift! Made possible by partnership with RadGirlCreations - check out all the nerdy healthcare humor.
Craft me Happy is a craft blog full of inspiration, techniques and helpful advice. It features knitting, spinning, resin, jewellery making and more.
From Baltimore bar Coelum comes this herbaceous update on the Corpse Reviver No. 1 cocktail.
