FRAMESET Frame Chatham Classic Step-thru, hand-built high-tensile steel, 16" center-to-top, with steel chainguard, double rear dropout eyelets, and rear rack braze-ons Fork Unicrown, steel, 1" threaded, 2x eyelets WHEELSET Rims Retrospec aluminum double-wall 36H, precision machined brake tracks with wear indicator Hubs Steel, ball-bearing, 36H, bolt-on, F/100-R/135mm Spokes 14G UCP Tires Retrospec Cruiser Classic 26 x 2.125, S/V valves EXTRAS Kickstand Center-mount, steel DRIVETRAIN Rear Derailleur: Shimano Tourney 7S Shifters Shimano Revoshift (twist) 7S, RS35 Crank Steel 1-piece 165mm x 44T Chain KMC Z-series 1/2 x 3/32" BB Loose-ball retainer Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Chatham Swingback steel 700mm width Grips Chatham foam 125mm length Stem Quill-type aluminum 80mm extension/30⁰ degree rise Saddle Coastal Comfort Plus Seatpost Steel 25.4 x 350mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2" Recommended Weight Limit 250 LBS *Due to differences in screen resolutions, please note that colors may differ slightly.
He calls them his professional pajamas. These are a riff off of the Jedediah Pants by Thread Theory, the only independent menswear pattern designers we know of. They have truly found a niche market. I love their patterns -- they're drafted well, the instructions are thorough, and the designs are great modern cuts of cl
FRAMESET Frame Chatham Classic Step-thru, hand-built high-tensile steel, 16" center-to-top, with steel chainguard, double rear dropout eyelets, and rear rack braze-ons Fork Unicrown, steel, 1" threaded, 2x eyelets WHEELSET Rims Retrospec aluminum double-wall 36H, precision machined brake tracks with wear indicator Hubs Steel, ball-bearing, 36H, bolt-on, F/100-R/135mm Spokes 14G UCP Tires Retrospec Cruiser Classic 26 x 2.125, S/V valves EXTRAS Kickstand Center-mount, steel DRIVETRAIN Rear Derailleur: Shimano Tourney 7S Shifters Shimano Revoshift (twist) 7S, RS35 Crank Steel 1-piece 165mm x 44T Chain KMC Z-series 1/2 x 3/32" BB Loose-ball retainer Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Chatham Swingback steel 700mm width Grips Chatham foam 125mm length Stem Quill-type aluminum 80mm extension/30⁰ degree rise Saddle Coastal Comfort Plus Seatpost Steel 25.4 x 350mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2" Recommended Weight Limit 250 LBS *Due to differences in screen resolutions, please note that colors may differ slightly.
Happy Needle and Thread Thursday, friends! This week, my wild thing is on Spring Break, and so he and I decided to take a trip down to Baton Rouge to visit my family for a few days. We left the hubs
FRAMESET Frame Chatham Classic Step-thru, hand-built high-tensile steel, 16" center-to-top, with steel chainguard, double rear dropout eyelets, and rear rack braze-ons Fork Unicrown, steel, 1" threaded, 2x eyelets WHEELSET Rims Retrospec aluminum double-wall 36H, precision machined brake tracks with wear indicator Hubs Steel, ball-bearing, 36H, bolt-on, F/100-R/135mm Spokes 14G UCP Tires Retrospec Cruiser Classic 26 x 2.125, S/V valves EXTRAS Kickstand Center-mount, steel DRIVETRAIN Rear Derailleur: Shimano Tourney 7S Shifters Shimano Revoshift (twist) 7S, RS35 Crank Steel 1-piece 165mm x 44T Chain KMC Z-series 1/2 x 3/32" BB Loose-ball retainer Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Chatham Swingback steel 700mm width Grips Chatham foam 125mm length Stem Quill-type aluminum 80mm extension/30⁰ degree rise Saddle Coastal Comfort Plus Seatpost Steel 25.4 x 350mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2" Recommended Weight Limit 250 LBS *Due to differences in screen resolutions, please note that colors may differ slightly.
FRAMESET Frame Chatham Classic Step-thru, hand-built high-tensile steel, 16" center-to-top, with steel chainguard, double rear dropout eyelets, and rear rack braze-ons Fork Unicrown, steel, 1" threaded, 2x eyelets WHEELSET Rims Retrospec aluminum double-wall 36H, precision machined brake tracks with wear indicator Hubs Steel, ball-bearing, 36H, bolt-on, F/100-R/135mm Spokes 14G UCP Tires Retrospec Cruiser Classic 26 x 2.125, S/V valves EXTRAS Kickstand Center-mount, steel DRIVETRAIN Rear Derailleur: Shimano Tourney 7S Shifters Shimano Revoshift (twist) 7S, RS35 Crank Steel 1-piece 165mm x 44T Chain KMC Z-series 1/2 x 3/32" BB Loose-ball retainer Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Chatham Swingback steel 700mm width Grips Chatham foam 125mm length Stem Quill-type aluminum 80mm extension/30⁰ degree rise Saddle Coastal Comfort Plus Seatpost Steel 25.4 x 350mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2" Recommended Weight Limit 250 LBS *Due to differences in screen resolutions, please note that colors may differ slightly.
FRAMESET Frame Chatham Classic Step-thru, hand-built high-tensile steel, 16" center-to-top, with steel chainguard, double rear dropout eyelets, and rear rack braze-ons Fork Unicrown, steel, 1" threaded, 2x eyelets WHEELSET Rims Retrospec aluminum double-wall 36H, precision machined brake tracks with wear indicator Hubs Steel, ball-bearing, 36H, bolt-on, F/100-R/135mm Spokes 14G UCP Tires Retrospec Cruiser Classic 26 x 2.125, S/V valves EXTRAS Kickstand Center-mount, steel DRIVETRAIN Rear Derailleur: Shimano Tourney 7S Shifters Shimano Revoshift (twist) 7S, RS35 Crank Steel 1-piece 165mm x 44T Chain KMC Z-series 1/2 x 3/32" BB Loose-ball retainer Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Chatham Swingback steel 700mm width Grips Chatham foam 125mm length Stem Quill-type aluminum 80mm extension/30⁰ degree rise Saddle Coastal Comfort Plus Seatpost Steel 25.4 x 350mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2" Recommended Weight Limit 250 LBS *Due to differences in screen resolutions, please note that colors may differ slightly.
We’re almost through the basic theory that a new sewer needs to know. Just a couple more hubs then we’ll be able to dive into the fun projects and procedures. This one is probably going to be the hardest lesson to write and to 'get'. In the...
Item specificsCondition
Floss wrapped rickrack is an easy technique used to add extra color to your project. The rickrack can be either machine stitched to the fabric first, or stitched to the fabric using only the floss. I used floss wrapped rickrack to edge the collar of the romper for "First Day of Spring", and on the dress "Spring Flowers." Using three strands of DMC floss, thread the needle and tie a knot in one end of the thread. Insert the needle through the back of the fabric and come up above the rickrack in one of the "valleys." Insert the needle through the fabric below the rickrack, and come out above the rickrack. Pull the thread all the way through. Continue to the end of the rickrack and tie off on the wrong side of the fabric.
Description For sale is 1 new Twin axle trailer kit - Max Load 620kg These kits can be used for making trailers for on & off-road use The tyres are E-marked & the hubs are high speed Specifications: Wheels (4pcs) The tyres are 22x11.00-8 4ply P308 Wanda Utility, fitted to 7.00x8 4/100 silver wheel rims They are hard wearing 4ply tyres with a thread depth of 16mm Overall diameter: 538mm Max section width: 260mm Max load: 340lbs (155kg) per wheel @ 5psi Max speed: 63mph (100kph) Hub & Stub axles (4pcs) The hubs are 4 stud 100mm PCD - M12 stud, they have high speed sealed ball bearings - you never have to grease them! The stub axles are 35x35mm square 200mm long - with rounded edges - they are a genuine 'SteelPress Production' product Delivery is free to all mainland UK addresses, there is an off-shore island surcharge (please enquire) If you need anymore info we are here to help. Click here to contact us for any details Click here to view more trailer kits Product Images Other Products See all other
FRAMESET Frame Chatham Classic Step-thru, hand-built high-tensile steel, 16" center-to-top, with steel chainguard, double rear dropout eyelets, and rear rack braze-ons Fork Unicrown, steel, 1" threaded, 2x eyelets WHEELSET Rims Retrospec aluminum double-wall 36H, precision machined brake tracks with wear indicator Hubs Steel, ball-bearing, 36H, bolt-on, F/100-R/135mm Spokes 14G UCP Tires Retrospec Cruiser Classic 26 x 2.125, S/V valves EXTRAS Kickstand Center-mount, steel DRIVETRAIN Rear Derailleur: Shimano Tourney 7S Shifters Shimano Revoshift (twist) 7S, RS35 Crank Steel 1-piece 165mm x 44T Chain KMC Z-series 1/2 x 3/32" BB Loose-ball retainer Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Chatham Swingback steel 700mm width Grips Chatham foam 125mm length Stem Quill-type aluminum 80mm extension/30⁰ degree rise Saddle Coastal Comfort Plus Seatpost Steel 25.4 x 350mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2" Recommended Weight Limit 250 LBS *Due to differences in screen resolutions, please note that colors may differ slightly.
Happy Needle and Thread Thursday, friends! This week, my wild thing is on Spring Break, and so he and I decided to take a trip down to Baton Rouge to visit my family for a few days. We left the hubs
Description For sale is 1 new trailer kit Road legal & high speed Specifications: Wheels (2pcs) The tyres are 5.00 - 10 trailer tyre E marked, They are hard wearing tyres with a thread depth of 6mm The wheels are heavy duty steel rims with 4 studs 100mm PCD (centre hole is 60mm) Overall diameter: 508mm Max section width: 137mm Max load: 785lbs (355kg) each @ 40psi Max speed: 81mph (130kph) Hub & Stub axles (2pcs) The hubs are 4 stud 100mm PCD - M12 stud, they have high speed sealed ball bearings - you never have to grease them! The stub axles are 35x35mm square 200mm long with rounded edges they are a genuine 'SPP Steelpress Production' product Hitch (1pc) The hitch is pressed steel & sits over 50mm box section - with 2 fixing holes (M12) - it fits standard 50mm towball They are produced in Europe & are E-marked Max weight per kit 710kgs Delivery is free to all mainland UK addresses, there is an off-shore island surcharge (please enquire) If you need anymore info we are here to help. Click here to conta
DMM Rigging Hubs are rigging plates with potential to rig complicated systems in any direction – above and below and even on either side.
Happy Needle and Thread Thursday, friends! This week, my wild thing is on Spring Break, and so he and I decided to take a trip down to Baton Rouge to visit my family for a few days. We left the hubs
Description For sale is 1 new twin axle trailer kit - Max Load 1800kg These kits can be used for making trailers for off road use The hubs are high speed Specifications: Wheels (4pcs) The tyres are 22x11.00-10 4ply P334 Wanda, fitted to 4/100 silver wheel rims They are hard wearing 4ply tyres with a thread depth of 15.5mm Overall diameter: 585mm Max section width: 257mm Max load: 1000lbs (455kg) @ 20psi Max speed: 63mph (100kph) Hub & Stub axles (2pcs) These are genuine 'SPP' They are fully waterproof These hubs are rated to 80mph, They are fully legal to use on the road. They have sealed precision ball bearings, They never need to be greased. The hub has 4 x M12 studs, the PCD is 100mm The shaft is 40x40mm square - 125mm long (solid steel) with rounded edges for ease of fitment Weight capacity is 900kg per pair. (1800kgs total) Delivery is free to all mainland UK addresses, there is an off-shore island surcharge (please enquire) If you need anymore info we are here to help. Click here to cont
DMM Rigging Hubs are rigging plates with potential to rig complicated systems in any direction – above and below and even on either side.
DRAPER Universal Press Block [85656] Brand: Draper Tools Part Number: 85656 Universal Press Support. Providing an adjustable and stable support base, ideal for removing bearings and bushes and for vehicle hubs and other complicated shapes. The threaded holes enable the support bars to be screwed into multiple positions and the added block supplies additional support when required. Manufactured with an aluminium base plate and hardened steel bars. Display packed. Features and further details About Us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase. Payment Payments are now managed by eBay, you no longer pay the merchant directly. Various payment options are available to buyers at checkout. Sorry, but we do not take card payments over the
The whole world around us, all the facts and things in it, from the point of view of our knowledge, is divided into three categories: what we are not sure of, what we are sure of, and what we are ready to swear to defend with our life. That very hill to die on. And such beliefs are different for various people, of course.
Designed by the legend himself Ryan Nyquist. This is the bike he rides. Full Chromoly frame with 1-1/8" steerer tube and mid BB shell; 20.5" top Tube Full Cro-Mo 1 piece steerer fork with tapered legs intenrally threaded steerer tube; 32mm offset Haro full chromoly 9" rise 2-piece Bars Haro Baseline stem Haro Baseline grips Haro Baseline Cro-Mo 8 spline 19mm cranks 170mm Length Sealed front and rear hubs laced to 36H double wall rims 25/9 gear ratio Haro Baseline 2-piece seat with alloy post Haro HPF tires 20x2.4" front/rear Red only Frame Full Cro-Mo Frame w/ 1-1/8" Integrated Headtube, MID BB Shell, Removable 990 Brake Mounts & 14mm Axle Drop-outs, 13.15" CS, 75.5° HT Fork Full Cr-Mo 1-1/8" Quist, 1 Piece Steerer tube, Threadless Internally Threaded Steerer Tube & Tapered Legs 32mm offset Colors Vivid Red DRIVETRAIN Cranks Haro Baseline 3-pc Cr-Mo 8 Spline 170mm Bottom Bracket Sealed Bearing MID Sprocket 25t Steel Chainring Gearing 25/9 Pedals Haro Baseline 3-pc Cr-Mo 8 Spline 170mm - 25t Steel Chainring Chain Baseline chain Cassette 9t Driver WHEELS Tires Haro HPF 20X2.0 Front Hub 36h Alloy Sealed Rear Hub Alloy 9t Sealed Freecoaster Rims 20" Alloy 36h, Double Wall BRAKING SYSTEM Brake Radius Alloy 990 U-Brake Brake Lever Haro Baseline Two Finger OTHER COMPONENTS Grips Haro Baseline 163mm flangeless Handlebar Haro Cr-Mo Bar, 9" Rise Stem Haro Baseline 48mm Reach Headset Integrated 1-1/8" Threadless Sealed Bearing Seat Baseline 5° Seat/ Post Combo Seat Post Aluminium 25.4mm Seat Post Clamp Integrated
Description For sale is 1 new twin axle trailer kit Road legal & high speed Specifications: Wheels (4pcs) The tyres are 5.00 - 10 trailer tyre E marked, They are hard wearing tyres with a thread depth of 6mm The wheels are heavy duty steel rims with 4 studs 100mm PCD (centre hole is 60mm) Overall diameter: 508mm Max section width: 137mm Max load: 785lbs (355kg) each @ 40psi Max speed: 81mph (130kph) Hub & Stub axles (4pcs) The hubs are 4 stud 100mm PCD - M12 stud, they have high speed sealed ball bearings - you never have to grease them! The stub axles are 35x35mm square 200mm long - with rounded edges - they are a genuine 'SteelPress Production' product Hitch (1pc) The hitch is pressed steel & sits over 50mm box section - with 2 fixing holes (M12) - it fits standard 50mm towball They are produced in Europe & are E-marked Max weight per kit 750kgs (limited by the hitch to 750kg, the four wheels will carry 1420kgs) Delivery is free to all mainland UK addresses, there is an off-shore island surcharg
The C.E. Smith 1/2" Wheel Nuts 5-Pack brings durability and convenience. Each zinc-plated wheel nut in this handy 5-pack fits most common trailer hubs. Classic C.E. Smith quality ensures years of reliable ruggedness. Made in USA. Fits most common trailer hubs Zinc-plated Convenient 5-pack 1/2"-20 thread
Description For sale is 1 new trailer kit Road legal & high speed Specifications: Wheels (2pcs) The tyres are 5.00-10 trailer tyre E marked, They are hard wearing tyres with a thread depth of 6mm The wheels are heavy duty steel rims with 4 studs 100mm PCD (centre hole is 60mm) Overall diameter: 508mm Max section width: 137mm Max load: 785lbs (355kg) each @ 40psi Max speed: 81mph (130kph) Hub & Stub axles (2pcs) The hubs are 4 stud 100mm PCD - M12 stud, they have high speed sealed ball bearings - you never have to grease them! The stub axles are 35x35mm square 200mm long - with rounded edges - they are a genuine 'SPP Steelpress Production' product (No hitch) Max weight per kit 710kgs Delivery is free to all mainland UK addresses, there is an off-shore island surcharge (please enquire) If you need anymore info we are here to help. Product Images Untitled Document
FRAMESET Frame Classic City Step-thru, hand-built high-tensile steel, steel chainguard, double rear dropout eyelets, rear rack braze-ons & decals protected by clear-coat Fork Unicrown, threaded, 2x eyelets WHEELS Rims Retrospec aluminum double-wall 32H, 20mm apex section, precision machined brake tracks with wear indicator Hubs Steel ball-bearing, 32H, bolt-on Spokes 14G UCP Tires Retrospec 700C x 35 All-Conditions, S/V valves ACCESSORIES: Kickstand Center-mount, steel Rear Carrier Classic design, steel with "mousetrap-style" spring-clip (40lb load limit) Bell Aluminum Fenders Classic full-wrap steel DRIVETRAIN Derailleur Shimano Tourney 7S Shifter Shimano Revoshift (twist) 7S Crank Steel 1-piece 170mm x 44T, w/chainwheel guard Chain KMC Z-series 1/2 x 3/32" BB Loose-ball retainer Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Steel Riser 620mmwide, 60mm rise, 15° sweep, 25.4 Center Grips Retrospec Comfort Stem Quill-type, steel/alloy 40mm extension/30⁰ degree rise Saddle Retrospec Women's/Men's specific ErgoComfort Seatpost Steel 25.4mm x Step-Thru 350mm, Diamond 300mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2" Recommended Weight Limit 250 LBS
In the vibrant tapestry of Toronto, where cultures intertwine and languages dance in harmony, translation agencies serve as the invisible…
FRAMESET Frame Lightweight, Hand-Built, High-Tensile Strength Steel Frame with steel chainguard, double rear dropout eyelets, rear rack braze-ons & decals protected by clear-coat Sizes 50cm, 54cm, 58cm Fork Unicrown, threaded, 2x eyelets WHEELSET Rims Retrospec aluminum double-wall 32H, 20mm apex section, precision machined brake tracks with wear indicator Hubs Steel ball-bearing, 32H, bolt-on Spokes 14G UCP Tires Retrospec 700C x 35 All-Conditions, S/V valves ACCESSORIES: Kickstand Center-mount, steel Rear Carrier Classic design, steel with "mousetrap-style" spring-clip (40lb load limit) Bell Aluminum Fenders Classic full-wrap steel DRIVETRAIN Rear Derailleur Shimano Tourney 7S Shifters Shimano Revoshift (twist) 7S Crank (Legacy) Steel 1-piece 170mm x 44T, w/chainwheel guard Crank Steel 2-pc 170mm x 44T steel sprocket w/guard Chain KMC Z-series 1/2 x 3/32" BB (Legacy) Loose-ball retainer, 24tp BB Sealed Cartridge 113.5 axle Freewheel/Cog Shimano Tourney 500, 7S 14-28T COMPONENTS Headset 1 1/8" (28.6mm) steel, Threaded Brakes Aluminum alloy linear side-pull calipers & brake alloy/nylon levers Handlebars Steel Riser 620mmwide, 60mm rise, 15° sweep, 25.4 Center Grips Retrospec Comfort Stem Quill-type, steel/alloy 40mm extension/30⁰ degree rise Saddle Retrospec Women's/Men's specific ErgoComfort Seatpost Steel 25.4mm x Step-Thru 350mm, Diamond 300mm Seatpost Clamp Aluminum alloy Pedals High Impact, Reinforced Nylon Resin Platform, 1/2"
Threaded stud makes mounting these swivel casters quick and easy. Heavy-duty solid rubber tires, ball bearing swivel mechanism and shielded hubs also make these a great value. All threads are metric. 220 lb. capacity.
via http://bobbasset.com/archives/771