Beautiful wooden bench tops imported from Europe to New Zealand. European Oak, Walnut. Made to measure. Cost-effective, stunning, kitchen bench tops
Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear.
Kromski Makes Two Styles of Lazy Kates – Arched and Upright Arched – Standard on Mazurka and Symphony Wheels Upright – Standard on the Polonaise Each Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear. PLEASE NOTE: Our first response to your order would be to have it shipped directly from our warehouse. In the case that our stock levels are too low, your order may need to be either ordered into our warehouse or dropshipped directly to you from Kromski’s warehouse in Georgia, USA. Please allow 3-5 business days for them to process and ship out your order before receiving an e-mail with your tracking number. Should your order be backordered with our vendor, one of our customer service representatives will contact you with delays and shipping information. Please note that Kromski drop-ships are sent via UPS or USPS and typically arrive within 3-7 business days after being shipped. Please provide a physical address for your order as UPS does not send to PO Boxes. Drop-shipping is not available for international orders at this time so please allow time for your order to reach us before we ship it to you. Please contact us with any questions or concerns regarding your order at (509) 536-7746 or [email protected].
Each Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear. Kromski Makes Two Styles of Lazy Kates – Arched and Upright
Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear.
Tensioned Arched Lazy Kate by Kromski This arched Lazy Kate holds up to three regular bobbins, or 1 jumbo bobbin with 1 regular bobbin (bobbins sold separately). The bobbin rods are made of heavy metal. This tensioned Lazy Kate will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). This Polish crafted wooden Lazy Kate is also perfect to use in a reenactment scene. This lazy kate was designed to coordinate perfectly with the Kromski spinning wheels and will also look very lovely with other brands of spinning wheels. This is the same design of lazy kate that originally comes with the Kromski Symphony spinning wheel (sold separately). To see how this Lazy Kate works, watch the folks from Kromski here: https://youtu.be/0wVt6AEwfEc Please note this listing is for the lazy kate ONLY! This listing does NOT include any bobbins. The bobbins are sold separately.
Kromski Makes Two Styles of Lazy Kates – Arched and Upright Arched – Standard on Mazurka and Symphony Wheels Upright – Standard on the Polonaise Each Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear. PLEASE NOTE: Our first response to your order would be to have it shipped directly from our warehouse. In the case that our stock levels are too low, your order may need to be either ordered into our warehouse or dropshipped directly to you from Kromski’s warehouse in Georgia, USA. Please allow 3-5 business days for them to process and ship out your order before receiving an e-mail with your tracking number. Should your order be backordered with our vendor, one of our customer service representatives will contact you with delays and shipping information. Please note that Kromski drop-ships are sent via UPS or USPS and typically arrive within 3-7 business days after being shipped. Please provide a physical address for your order as UPS does not send to PO Boxes. Drop-shipping is not available for international orders at this time so please allow time for your order to reach us before we ship it to you. Please contact us with any questions or concerns regarding your order at (509) 536-7746 or [email protected].
Tensioned Arched Lazy Kate by Kromski This arched Lazy Kate holds up to three regular bobbins, or 1 jumbo bobbin with 1 regular bobbin (bobbins sold separately). The bobbin rods are made of heavy metal. This tensioned Lazy Kate will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). This Polish crafted wooden Lazy Kate is also perfect to use in a reenactment scene. This lazy kate was designed to coordinate perfectly with the Kromski spinning wheels and will also look very lovely with other brands of spinning wheels. This is the same design of lazy kate that originally comes with the Kromski Symphony spinning wheel (sold separately). To see how this Lazy Kate works, watch the folks from Kromski here: https://youtu.be/0wVt6AEwfEc Please note this listing is for the lazy kate ONLY! This listing does NOT include any bobbins. The bobbins are sold separately.
Facial brackets or truss plate connectors. This page consists of beam brackets that you'd put on the face of your beams or truss which is the exposed par...
Our team at Homestead Timber Frames would like to share some of our clients’ favorite timber frame projects that we have completed.
Facial brackets or truss plate connectors. This page consists of beam brackets that you'd put on the face of your beams or truss which is the exposed par...
Kromski Makes Two Styles of Lazy Kates – Arched and Upright Arched – Standard on Mazurka and Symphony Wheels Upright – Standard on the Polonaise Each Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear. PLEASE NOTE: Our first response to your order would be to have it shipped directly from our warehouse. In the case that our stock levels are too low, your order may need to be either ordered into our warehouse or dropshipped directly to you from Kromski’s warehouse in Georgia, USA. Please allow 3-5 business days for them to process and ship out your order before receiving an e-mail with your tracking number. Should your order be backordered with our vendor, one of our customer service representatives will contact you with delays and shipping information. Please note that Kromski drop-ships are sent via UPS or USPS and typically arrive within 3-7 business days after being shipped. Please provide a physical address for your order as UPS does not send to PO Boxes. Drop-shipping is not available for international orders at this time so please allow time for your order to reach us before we ship it to you. Please contact us with any questions or concerns regarding your order at (509) 536-7746 or [email protected].
Tensioned Arched Lazy Kate by Kromski This arched Lazy Kate holds up to three regular bobbins, or 1 jumbo bobbin with 1 regular bobbin (bobbins sold separately). The bobbin rods are made of heavy metal. This tensioned Lazy Kate will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). This Polish crafted wooden Lazy Kate is also perfect to use in a reenactment scene. This lazy kate was designed to coordinate perfectly with the Kromski spinning wheels and will also look very lovely with other brands of spinning wheels. This is the same design of lazy kate that originally comes with the Kromski Symphony spinning wheel (sold separately). To see how this Lazy Kate works, watch the folks from Kromski here: https://youtu.be/0wVt6AEwfEc Please note this listing is for the lazy kate ONLY! This listing does NOT include any bobbins. The bobbins are sold separately.
a blog about architecture, gardening, historic preservation, Napa, home wine making, back roads, local politics, Napa Porchfest, food and wine
Every South Mountain Company project rests on a foundation of integrated Architecture, Engineering, and Construction that balances art, science, and craft.
Cantre à bobine de précision en bois massif (tensioned lazy kate), assorti au rouet Minstrel et Sonata. Le frein permet de ralentir les bobines et évite au fil de s'emmêler lors du retors. Convient aussi pour les bobines Ashford. (bobines non incluses) Même si certains produits Kromski sont en stock, d'autres peuvent prendre de 2 à 3 semaines pour vous être livrés. Contactez-nous si ous souhaitez les informations pour un produit précis.
International real estate firm Hines has announced plans for T3 Bayside, the first office building in Toronto’s emerging Bayside community, located on the shores of Lake Ontario. Designed by the Danish architecture firm 3XN with architect of record
Which types of metal worktops, bar tops and countertops are available and how do you choose? What will a metal worktop cost? Read our post to find out.
Learn about the process we go through to get the right timber for your project.
Mass timber—specifically cross-laminated timber (CLT)—continues to spread across the nation as an alternative to traditional concrete and steel construction. CLT panels are described as large-scale, predesigned, and highly engineered for precise tolerances.
I am currently developing a series of steel connections for glulam columns and beams. This page will be updated as more become available. All components on this page were made in Revit 2018. Knife Plate Connector The knife plate connector […]
Eco Timber Group supplies Premium Quality Timber in Melbourne. Purchase locally sourced quality timber from sustainable sources. Get a quote.
Welcome to Glenfort Timber Engineering. We are a third generation family run business located in Dungannon, County Tyrone. As a fully bespoke Design and Build company we at Glenfort have a commitment to the continuous development and use of timber in construction.
Foxworth-Galbraith designs and crafts specialty timber truss systems for custom homes, restaurants, commercial buildings, outdoor living areas and more.
SpaceCraft specialises in design and manufacture of custom joinery for residential and high end commercial spaces, like cellar doors.
Facial brackets or truss plate connectors. This page consists of beam brackets that you'd put on the face of your beams or truss which is the exposed par...
Cantre à bobine de précision en bois massif (tensioned lazy kate), assorti au rouet Minstrel et Sonata. Le frein permet de ralentir les bobines et évite au fil de s'emmêler lors du retors. Convient aussi pour les bobines Ashford. (bobines non incluses) Même si certains produits Kromski sont en stock, d'autres peuvent prendre de 2 à 3 semaines pour vous être livrés. Contactez-nous si ous souhaitez les informations pour un produit précis.
Kromski Makes Two Styles of Lazy Kates – Arched and Upright Arched – Standard on Mazurka and Symphony Wheels Upright – Standard on the Polonaise Each Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear. PLEASE NOTE: Our first response to your order would be to have it shipped directly from our warehouse. In the case that our stock levels are too low, your order may need to be either ordered into our warehouse or dropshipped directly to you from Kromski’s warehouse in Georgia, USA. Please allow 3-5 business days for them to process and ship out your order before receiving an e-mail with your tracking number. Should your order be backordered with our vendor, one of our customer service representatives will contact you with delays and shipping information. Please note that Kromski drop-ships are sent via UPS or USPS and typically arrive within 3-7 business days after being shipped. Please provide a physical address for your order as UPS does not send to PO Boxes. Drop-shipping is not available for international orders at this time so please allow time for your order to reach us before we ship it to you. Please contact us with any questions or concerns regarding your order at (509) 536-7746 or [email protected].
Lazy Kate holds up to three bobbins. The bobbin rods are made of heavy metal. These tensioned Kates will accommodate most brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins). They are available unfinished or finished in mahogany, walnut or clear.
The project's engineering and architectural requirements demonstrate Art Massif's expertise in glued-laminated timber structures.
Our brackets are made in the USA out of Heavy Duty 12 gauge American Made steel, almost 1/8” thick. They are not flimsy/bendable metal. Mounting holes sized so they can be easily installed using any 1/2" wood lag screws or thru bolts of your choice.We also make custom brackets if you don't find exactly what you are looking for, drop us a note and let us know. If you have a sketch include it with your note as well. If you would like to add a design to the brackets, like initials, an animal or something else, let us know and we can create a special order for you. This bracket is great for not only helping to support your wood projects, but also adding a decorative touch as well. Our brackets are made to order* Finish Choice - Raw Steel/Bare Metal or Finished in Ultraviolet (UV) resistant - baked on powder coating - rated for outdoor use.* Made in the USA with American Made Steel* 12 gauge steel (almost 1/8" Thick)* Mounting holes sized for 1/2" Lag screws or through bolts.Color Matching Lag Screws AvailableOther brackets we offer: 90 Degree Angle Bracket - use where you want to add an inside corner or for strength. * Decorative Design * Structural Design Outside Corner Brackets - bent at a 90 degree angle to fit over 8 x 8 post. (The holes for the legs are offset so you don't have to worry about hitting any of the other installed bolts!) * Decorative Design * Structural Design Straight Bracket - This straight bracket is great for not only helping to support your wood projects, but also adding a decorative touch as well. * Decorative Design * Structural Design Flat T brackets – Add strength to a joint, or adjoin other parts to your design. * Decorative Design * Structural Design Flat L brackets - Flat like the T, but without the additional leg. * Decorative Design * Structural Design X Brackets - Can be used to cross multiple pieces to add strength, or for a nice decorative finish. * Decorative Design * Structural Design Please note that you need to consult an Engineer if you want to know load calculations for your beams and ties. As a general rule 12 gauge is close to 1/8" steel and will add more rigidity and is suitable for most projects. Again we offer no structural guarantee for load bearing purposes, Please consult a Professional Engineer to perform calculations if required.Materials: Steel, Raw Metal, Bare Metal, Powder Coated, Paint