Wall molding package ready to assemble, pre-cut factory primed, wall paneling kit - Nested rectangle wainscoting panels This package includes: 62.99" by 27.55" 2 pieces of upper rectangles on the right and left (outside of the panel) the wall molding is 4 cm in width 55.12" by 19.68" 2 pieces of upper rectangles on the right and left (inside of the panel) the wall molding is 2,5cm in width 62.99" by 62.99" 1 piece of the middle section (outside of the panel) the wall molding is 4 cm in width 55.12" by 55.12" 1 piece of the middle section (inside of the panel) the wall molding is 2,5cm in width 19.68" by 27.55" 2 pieces bottom rectangles on the right and left (outside of the panel) the wall molding is 4 cm in width 11.81" by 19.68" 2 pieces bottom rectangles on the right and left (inside of the panel) the wall molding is 2,5cm in width 19.68" by 62.99" 1 piece of the middle section (outside of the panel) the wall molding is 4 cm in width 11.81" by 55.12" 1 piece of the middle section (inside of the panel) the wall molding is 2,5cm in width The best wall size for this package is 110" by 150.13" but you don't need to follow these dimensions. Your wall could be 5 points higher or smaller than that. Please don't hesitate to contact us to make sure, we are always here to assist you :) Wall molding packages are ready to install, you don't need to spend time cutting them. Don't worry about the edges, we handled it for you. It does not take too much effort to install the moldings on the wall, you would follow the instruction for installing them in the package. We mark every piece of the molds to help you understand how to follow the steps to get the final look. *This is not self-adhesive wall molding. How to install wall molding on the wall, 1- Layout the pieces on the floor and get them in the shape that is shown in the worksheet 2- Mark the wall where the wall molding will be installed according to the plan that shows the layout of the panels 3- Stick the pieces one by one to get them into the shape (panel) 4- Stick the panels to the wall and use a water leveler to align the panels. 4 a - You can use nails or glue to attach it to the wall, both of them can be used together for a better solution. 5- Step back and pat your back for a while, you nailed it! For a better shipping experience; Please add your phone number to your order so the shipping company can reach you when it is needed. We provide shipping to all over the world with express shipping.
Transform your walls into a stunning masterpiece with our ready-to-assemble wall molding package! Here are some highlights of our product: *** Easy installation: Our wall molding package comes with pre-cut factory-primed molding and frames, making installation a breeze. Simply layout the pieces on the floor, mark the wall where the molding will be installed, stick the pieces together, and attach the panels to the wall using nails or glue. *** Beautiful design: The package includes 3 upper rectangles and 3 bottom frames, each with a molding size of 0.98" in width and 0.51" in thickness. The pre-cut pieces fit together seamlessly to create a stunning wainscoting paneling design on your walls. *** Customizable: The best wall size for this package is 108.34" H by 144.28" L, but you can adjust the dimensions to fit your specific needs. You can also paint the frames and rectangles any color you like to match your decor. *** Expert guidance: We provide step-by-step instructions and marked pieces to guide you through the installation process. If you have any questions or need assistance, don't hesitate to contact us. We're always here to help you achieve the look you want. *** High-quality materials: Our wall molding package is made from high-quality materials that are built to last. The factory-primed molding and frames ensure durability and longevity. *** Not self-adhesive: Please note that this is not a self-adhesive wall molding. However, we guarantee that the installation process will be a breeze, and you'll be able to enjoy your beautiful new wainscoting panels in no time. *** The dimensions of our wall molding package are as follows: *** 3 pieces upper frames: 24" by 39.37" *** 3 pieces bottom rectangles: 11" by 39.37" Take the first step towards transforming your walls with our ready-to-assemble wall molding package!
Ready to really elevate your room? This arch box molding will do just that. Follow this easy DIY tutorial to really make a wow statement.
How to easily DIY this Parisian style wall panelling that I installed in my bedroom. Follow my step-by-step guide on how to add these polymer wall panels in your home, including tips on planning and measuring up correctly!
We offer free designing services for the paneling of your walls. Simply provide us with the measurements of your walls, and we'll create a custom drawing for you. You can then print out the drawing and either cut the molding yourself or have your contractor handle the installation. Set A (Moulding Pre-cut as My Wall), which means we would design as your wall size and pre-cut moldings to 45 degree at two ends and the lengths as per the design file. Set A (Moulding Pack in 4 feet), which means you will get both moldings in length 4 feet per piece, you or your contractor need to cut and joint the molding into the lengths and cut some two ends 45 degree as needs. Set A (Moulding Pack in 4 feet), which means you will get both moldings in length 8 feet per piece, you or your contractor need to cut and joint the molding into the lengths and cut some two ends 45 degree as needs. If you select set A, you will be given the following items: - 12 corner appliques - 2 horizontal appliques - 2 leaf appliques - 2 heart appliques - 2 seashell appliques - 14 end-curled moldings - 4pcs partition moldings, each measuring 45 inches, totaling 15ft - 28pcs outer frame moldings, each measuring 45 inches, totaling 105ft - 28pcs inner frame moldings, each measuring 45 inches, totaling 105ft Convo us your wall size, so we will send you the appropriate amount of moldings. Please note: 1. What you will receive are the separate pieces of the item. They are to be installed one piece by one piece onto the wall/ceiling. 2. The moldings. - The listed price is for standard packing of moldings: the length of line molding is 45 inches. If you choose standard packing, you or your contractor needs to cut/joint the molding to form the frames. - Pre-cut service: If you want us Pre-cut the moldings as your drawing that we could design as your wall, then it is paid service of $150. We'd cut the molding into each section of the frames as the drawing drew for your wall. And it takes 2 weeks for pre-cut moldings. 3. There is color difference between pieces, because they are made of two different materials, some HDP and the others resin, though they are all in white color. The density of HDP and resin is different, so you will feel HDP piece is lighter and resin piece is heavier. 4. You need to paint them after all pieces installed and joints filled well - Painting is to cover the color difference between the pieces. - Painting is to get seamless effect. 5. It is skilled work to install the pieces, fill the joints/gaps seamlessly and paint colors. So you or your contractor should be highly experienced in interior building. 6. You need to prepare installation tools and materials by yourself, which mainly includes Gun nail and applicator or Screw Driver, construction glue, acrylic gap filler sealant, paints. Gun nail and applicator or Screw Driver is used to - tack/screw all the pieces to the wall/ceiling tightly, besides construction glue applied onto the back Construction glue is used - onto the back of the pieces for attaching to the wall/ceiling - to glue the broken piece of HDP pieces if there were. (Use quick-dry glue if the piece is made of resin, resin piece is heavier than HDP) Acrylic gap filler sealant is used to - joints between the pieces and the surface of the wall/ceiling - joints between moldings if there were - joints between corners and moldings if there were - joints between appliques and moldings if there were - Hole of nail of screw Storage of Molding (If there were) Long molding is easily to be bent if leaning on a wall single by single. To avoid bent, please bundle the moldings tightly at the middle and two ends in per bundle, and then store the bundle of molding at a flat surface. Never place the moldings loosed or place each molding in single for days or months, or even leaned on a wall or object. A bit bent is not a problem, use gun nail to tack along the straight line on the wall. Check sample Video of installation: www.pinterest.com/CustomsBot Size tolerance: There is always size tolerance. Usually the actual size made out is a bit smaller than the data we marked of the design. Size tolerance can be varied from 1% to 10% based on different sizes or batches. Take for example: (1) 12cm, tolerance may be 1cm (2) 60cm, tolerance may be 1.2cm (3) 120cm, tolerance may be 2cm Designs minor change: In rare time, the design of a wood applique and item received may be a bit different from the image shows, just a bit different, it doesn't affect the original design idea and structure. ------------------ Pay by Debit Card/Credit Card: You can pay successfully without a Paypal account. Here is the tutorial video: https://www.youtube.com/watch?v=78tVATa1mvM Steps as below: 1. Click on the "Check out with PayPal" or "Pay with Paypal" button in Etsy, then the page will move to PayPal. 2. Click "Pay with Credit or Debit Card" in Paypal page. 3. Enter your personal information, billing address and credit or debit card information. Choose option "No, I don't want an account now" in "Create a Paypal account?" Click "Continue". ------------ Importing Tax: No import tax for 99% parcels through Standard Shipping. You can take it easy to order in our shop. For Express service, only 5% parcels may be taxed as the policy of the destination's customs, usually the tax is less than $10 USD. Contact us to confirm the tax, we can help you on it. ------------ Returns & Refund We gladly accept returns and exchanges. Contact me within: 14 days of delivery, Ship items back within: 30 days of delivery Thank you for stopping by. https://www.etsy.com/shop/CustomsBot
DIY Wall Molding Kit - Ready For Assembly Wall Paneling Kit - Wall Trim Kit - DIY Wall Molding - Wainscot Panels Decorative wall molding is an increasingly popular type of wall cladding. Such wall decorations look beautiful and are very universal. It is easy to assemble. It can be painted together with the wall. You can use them in a living room, bedroom and even in a hallway. Do you like this form of interior design? You can also use it in your home or apartment. Choose from our ready-made packages. Let's design it together if you want. Get inspired and let's create a beautiful wall covering. Our products; • Painted • Easy to clean • Waterproof • Flexible Inside the package: • 6 piece 63in (160cm) • 12 piece 31,50in (80cm) • 6 piece 23,62in (60 cm) a total of 6 rectangles, 3 large and 3 small We will add an extra panel part for you to use in case you have any problems. The wall molding packages are ready for assembly. We will send it by cutting the edges that will be joined at the right angles. You will easily mount it on your wall with the installation instructions that will come out of the package. We are numbering each part of the patterns to help you understand how to follow the steps to get the final look. ***Self-adhesive wall is not molding. *****Pictures are examples of wall coverings made before To order in the size and shape you want; 1- Send us a photo of the wall where you will install your wall paneling, 2- Then let us know by accurately measuring the height and width of the wall, 3- Describe the style you like and send a corresponding explanatory picture, 4- According to the information and photo you send, we will prepare your project and send you a draft. after you confirmed the draft, we will prepare your order carefully and send it to you. ♥ Happy Shopping ♥
Wainscoting panelling, Wall Moulding Design, ready cut molding kit, accent wall & bespoke panels ,Chair rail design. Moldings are 2.5 cm ( 0.9 in ) wide. Please check the pictures for dimensions for this wainscot panel. You do not have to follow the dimensions. We are here for you to adust the dimensions according to your walls. Wall molding packages are ready to install, you don't need to spend time cutting them. Don't worry about the edges, We cut them for you. Just unpack and follow instructions. Note : Not a self adhesive wall moulding. Please do not hesitate to ask for different models. We can design your set with you. Process time is 3-4 days for this set and will be in US in about 3-7 days.
Wall Molding Bedroom Kit, Wainscoting Ready Cut Set, Wall Moulding Package - Accent Wall - Chair Rail Kit - Wall Paneling This is a wall molding ready made kit, wainscoting panels, ( Chair Rail, Wall Trim Kit ) Moldings are 4 cm ( 1.57 in ) wide. Please check the pictures for dimensions. We can adjust the dimensions according to your wall sizes. Wall molding packages are ready to install, you don't need to spend time cutting them. Don't worry about the edges, We cut them for you. Just unpack and follow instructions. Note : Not a self adhesive wall moulding. Please do not hesiate to ask for different models. We can design your set with you. We can make your design ready in 4 days and ship it to US. Most US destinations take about 3-6 days transit time. We will be here for you if you need any help with designing and/or installation. TRANSPORTATION…………………… We provide shipping to all over the world with express shipping. Please add your phone number so that the courier company can reach you with smooth and fast delivery.
Wall molding package ready to assemble, pre-cut factory primed, wall paneling kit - 3 upper and 3 bottom rectangles wainscoting panels (0.98'') we still haven't made our best designs. Because for this I need your inspirations and ideas. You dream it, I'll design it. What you need to do is very simple, just a few steps. 1) Take a picture of the area you will apply from the opposite side. 2) Report the width and height information. 3) Send your special requests and we will send our work, if you like it, create an order. I'm sure you will like it :) Wall lath packages are ready to install and very easy to apply. Mounting the wall laths to the wall is not a difficult task at all, you will follow the assembly instructions in the package. We post the assembly instruction to help you understand how to follow the steps to get the final look. How to attach the wall lath to the wall, 1- Arrange the pieces on the floor and create the shape on the worksheet. 2- Mark the wall where the laths will be attached according to the plan showing the layout. 3- Proceed by gluing the parts one by one. 4- Attach the slats to the wall and use a spirit level or square to align the slats. 5 - You can use nails or glue to stick it on the wall. Contact for more information.
If you want to upgrade and protect your walls, wainscoting in the way to go. Where do you start? Our list of 21 ideas can help.
Let’s go classic! The classic capsule collection is a dream for all wall panelling lovers. Ranging from the thinnest moulding to its larger brothers and sisters. Create balance and harmony by using
Paneling. Interior Architecture Inspiration and Ideas. Inspiring images featuring interior designs with wall and ceiling paneling
There’s a quiet elegance about a room adorned with wainscoting panels. They bring a timeless style, offering warmth and character to any space they grace.
Discover how to easily transform any room with DIY panel moulding. Learn step-by-step tips and tricks for a classic and elegant wall upgrade.
Discover the top trending interior design ideas for this year and into 2022! Come see why they’re so interesting! From embracing maximalist interiors, playing with patterns, decorating with wallpapers, incorporating detailed doors, elegant mouldings and millwork, and stylish and sculptural furniture
How I installed picture frame molding in our hallway. Learn what tools and materials you need to install this accent wall, how to install an accent wall on textured walls, and how to install picture frame molding or box trim.
Discover how to easily transform any room with DIY panel moulding. Learn step-by-step tips and tricks for a classic and elegant wall upgrade.
Fancy having a go at some DIY wall panelling? Here's how I achieved it in my bedroom with an easy step by step guide.
This article is a complete tutorial on how to install shadow box trim or molding squares to a wall in your home.
Do you also wish to give your room a sense of character and conviviality? Then get creative with panelling. You can use it to create impressive spaces. Fortunately, the time when panelling was conside
Make a statement with your walls with these creative DIY wall treatment project ideas that include painting stripes, adding molding and other great ideas!
Wainscoting Paneling Kit -Easy-to-Install- 3 Upper Rectangles and 3 Bottom Frames in our Pre-Cut, Factory-Primed Wall Molding Package we still haven't made our best designs. Because for this I need your inspirations and ideas. You dream it, I'll design it. What you need to do is very simple, just a few steps. 1) Take a picture of the area you will apply from the opposite side. 2) Report the width and height information. 3) Send your special requests and we will send our work, if you like it, create an order. I'm sure you will like it :) Wall lath packages are ready to install and very easy to apply. Mounting the wall laths to the wall is not a difficult task at all, you will follow the assembly instructions in the package. We post the assembly instruction to help you understand how to follow the steps to get the final look. How to attach the wall lath to the wall, 1- Arrange the pieces on the floor and create the shape on the worksheet. 2- Mark the wall where the laths will be attached according to the plan showing the layout. 3- Proceed by gluing the parts one by one. 4- Attach the slats to the wall and use a spirit level or square to align the slats. 5 - You can use nails or glue to stick it on the wall. Contact for more information.
DIY Accent Wall Kit, Wainscoting Kit, Wall Molding Package - ready to assemble, Easy-to-Install, Factory-Primed Wall Moulding Package - Bespoke Panels - Beadboard - Chair Rail Set 🎨🏠Transform your walls into a stunning masterpiece with ease using our ready-to-assemble wall molding package! Here are some highlights of our product: 🔨 Easy installation: Our wall molding package comes with pre-cut factory-primed molding and frames, making installation a breeze. Simply layout the pieces on the floor, mark the wall where the molding will be installed, stick the pieces together, and attach the panels to the wall using nails or glue. 💫 Beautiful design:The pre-cut pieces fit together seamlessly to create a stunning wainscoting paneling design on your walls. 🎨 Customizable: You can paint the frames and rectangles any color you like to match your decor. 👨🏫 Expert guidance: Don't worry if you're not a DIY expert! We provide step-by-step instructions and marked pieces to guide you through the installation process. If you have any questions or need assistance, our team of experts is always here to help you achieve the look you want. 💪 High-quality materials: Our wall molding package is made from high-quality materials that are built to last. The factory-primed molding and frames ensure durability and longevity. 🚫 Not self-adhesive: Please note that this is not a self-adhesive wall molding. However, we guarantee that the installation process will be a breeze, and you'll be able to enjoy your beautiful new wainscoting panels in no time. Upgrade your walls with our stunning wall molding package today! 🤩🏠🔨 Take the first step towards transforming your walls with our ready-to-assemble wall molding package!
Wall molding package ready to assemble, pre-cut factory primed, wall paneling kit - 3 upper rectangles and 3 bottom rectangles wainscoting panels This package includes the following size of frames: 47.25" by 23.63" 3 pieces upper frames (the molding size is 4 cm in width and 20mm in thickness) 15.74" by 23.63" 3 pieces bottom frames (the molding size is 4 cm in width and 20mm in thickness) *The chair rail is not included to the kit The best wall size for this package is 125.67" by 95.24" but you don't need to follow these dimensions. Your wall could be 5 points higher or smaller than that. Please don't hesitate to contact us to make sure, we are always here to assist you :) Wall molding packages are ready to install, you don't need to spend time cutting them. Don't worry about the edges, we handled it for you. It does not take too much effort to install the moldings on the wall, you would follow the instruction for installing them in the package. We mark every piece of the mold to help you understand how to follow the steps to get the final look. *This is not self-adhesive wall molding. How to install wall molding on the wall, 1- Layout the pieces on the floor and get them in the shape that is shown in the workseet 2- Mark the wall where the wall molding will be installed according to the plan that shows the layout of the panels 3- Stick the pieces one by one to get them into the shape (panel) 4- Stick the panels to the wall and use a water leveler to align the panels. 4 a - You can use nails or glue to attach it to the wall, both of them can be used together for a better solution. 5- Paint them as you want! 6- Step back and pat your back for a while, you nailed it! *This is not a self-adhesive wall molding. For a better shipping experience; Please add your phone number to your order so the shipping company can reach you when it is needed. We provide shipping to all over the world with express shipping.
Transform your walls into a stunning masterpiece with our ready-to-assemble wall molding package! Here are some highlights of our product: *** Easy installation: Our wall molding package comes with pre-cut factory-primed molding and frames, making installation a breeze. Simply layout the pieces on the floor, mark the wall where the molding will be installed, stick the pieces together, and attach the panels to the wall using nails or glue. *** Beautiful design: The package includes 3 upper rectangles and 3 bottom frames, each with a molding size of 0.98" in width and 0.51" in thickness. The pre-cut pieces fit together seamlessly to create a stunning wainscoting paneling design on your walls. *** Customizable: The best wall size for this package is 108.34" H by 144.28" L, but you can adjust the dimensions to fit your specific needs. You can also paint the frames and rectangles any color you like to match your decor. *** Expert guidance: We provide step-by-step instructions and marked pieces to guide you through the installation process. If you have any questions or need assistance, don't hesitate to contact us. We're always here to help you achieve the look you want. *** High-quality materials: Our wall molding package is made from high-quality materials that are built to last. The factory-primed molding and frames ensure durability and longevity. *** Not self-adhesive: Please note that this is not a self-adhesive wall molding. However, we guarantee that the installation process will be a breeze, and you'll be able to enjoy your beautiful new wainscoting panels in no time. Take the first step towards transforming your walls with our ready-to-assemble wall molding package!
Add instant character to your bedroom with these 10+ inexpensive bedroom wall panelling ideas that look amazing.
Primed Wall Molding Set, Ready to Use Wall Molding Set Wall Molding Set Pre-Cut Bespoke Cladding Trim Frames In this molding package; Same design as in the pictures, Two different sizes of wall moldings were used, 2.5 cm (0.98 in) wide and 4 cm (1.57 in) wide. You purchase 48 pre-cut, ready-to-install wall moldings. Please follow the pictures or ask us anyway to understand what you will get in the end. Wall molding packages are ready to install, you don't need to spend time cutting them. Don't worry about the edges, we took care of it for you. Installing the moldings on the wall does not require much effort, you just need to follow the installation instructions on the package. To get the final look, just follow the instructions I will share with you. If you can't get an idea about the design, you can review other customers' photo evaluations in the comments. Factory primed and ready for paint or faux varnish. You can also use it as is, it looks clean and white. You will like this wall molding paneling kit. Note: This is not a self-adhesive wallcovering. Please contact us if your project needs some help, we offer free design service for you, so you can see the final look of your project before purchasing. Please Note: None of Our Products Are Foam PUBLIC TRANSPORT We provide express shipping service to all over the world. Please add your phone number so that the cargo company can reach you with smooth and fast delivery.
Do you also wish to give your room a sense of character and conviviality? Then get creative with panelling. You can use it to create impressive spaces. Fortunately, the time when panelling was conside
Wall molding package ready to assemble, pre-cut factory primed, wall paneling kit - 3 upper rectangles and 3 bottom rectangles wainscoting panels This package includes the following size of frames: 47.25" by 23.63" 3 pieces upper frames (the molding size is 4 cm in width and 20mm in thickness) 15.74" by 23.63" 3 pieces bottom frames (the molding size is 4 cm in width and 20mm in thickness) *The chair rail is not included to the kit The best wall size for this package is 125.67" by 95.24" but you don't need to follow these dimensions. Your wall could be 5 points higher or smaller than that. Please don't hesitate to contact us to make sure, we are always here to assist you :) Wall molding packages are ready to install, you don't need to spend time cutting them. Don't worry about the edges, we handled it for you. It does not take too much effort to install the moldings on the wall, you would follow the instruction for installing them in the package. We mark every piece of the mold to help you understand how to follow the steps to get the final look. *This is not self-adhesive wall molding. How to install wall molding on the wall, 1- Layout the pieces on the floor and get them in the shape that is shown in the workseet 2- Mark the wall where the wall molding will be installed according to the plan that shows the layout of the panels 3- Stick the pieces one by one to get them into the shape (panel) 4- Stick the panels to the wall and use a water leveler to align the panels. 4 a - You can use nails or glue to attach it to the wall, both of them can be used together for a better solution. 5- Paint them as you want! 6- Step back and pat your back for a while, you nailed it! *This is not a self-adhesive wall molding. For a better shipping experience; Please add your phone number to your order so the shipping company can reach you when it is needed. We provide shipping to all over the world with express shipping.
Self assembly panelling and Wall Panelling Kits. DIY and supply only panelling components from The Wall Panelling Company.
Wall Moulding Kit - 6Frames Wall Molding Assembly - Ready Package - Pre-Cut Factory Primed , DIY Accent Wall Kit -Package Included- 3 Top and 3 Bottom Frames 1X 47,24'' x 47,24'' [ 120 x 120cm] 1X 15,74'' x 47,24'' [ 40 x 120cm] 2X 23,62'' x 47,24' [ 60 x 120cm] 2X 15,74'' x 23,62'' [ 40 x 60cm] 👉You can customize the gaps between the pieces to fit your wall. ❗❗❗ If You Choose Additional Chair Rail The border is standard-sized with dimensions of; 3X = (47,24'') (120cm) If you require custom measurements, please contact us before making a purchase. !!!PLEASE CONTACT US TO CREATE CUSTOM MEASUREMENTS FOR YOUR WALL. Product Features: WATER-RESISTANT = Wall moldings are not affected by water and moisture due to their special formula and structure. They can be easily cleaned with common cleaning materials, making them highly practical. DURABLE AGAINST IMPACTS = With its hard surface, it's resistant to high impacts, making it more durable and long-lasting compared to other alternatives. This feature ensures that it can be used on your walls for many years. PAINTABLE = You can paint the wall moldings to match your preference, or you can use them as they are. Thanks to their primed surface, they can be used both painted and unpainted, allowing you to create wall moldings in the color that matches your home. EASY INSTALLATION = Wall moldings can be applied with any high-quality adhesive. They can also be cut, nailed, and screwed, just like wood, making installation very convenient. PRACTICAL FLEXIBILITY = Thanks to its semi-flexible structure, it provides excellent results even on uneven walls. It requires no maintenance and has a long lifespan. This feature allows it to be easily applied to any type of wall in your home. ENVIRONMENTALLY FRIENDLY FORMULA = Made from recyclable materials, the product can be reused throughout its life cycle. This feature shows that it is an environmentally friendly product. PROTECTION AGAINST MOLD AND PESTS = Thanks to its polystyrene structure, it prevents the formation of fungi, mold, AC bacteria, algae, pests, and bad odors. This feature ensures that the walls in your home are more hygienic and healthy. POLYSTYRENE FORMULA = With its special content, it is by far the best solution in terms of dimensional stability and optimum density compared to other alternatives. This feature enhances the quality and durability of wall moldings. !!!ABSOLUTELY NOT STYROFOAM. >>>We Ship Worldwide with Express Shipping.<<<
These are a fantastic way to transform your walls and create a stunning panelled look, Our MDF Shaker Wall Panelling Strips and Kits make it a breeze to achieve this classic and elegant design in your home. Really easy installation- simply glue and cut to size to fit to your walls. Each panelling kit covers 1.2m2 so measure your space and purchase the correct number of kits accordingly! To calculate the strips you required, measure the width of the wall, and divide this number by the length of the strip (1200mm).If your wall was 4 meters wide, you would need 3 full strips (1200mm each) plus another strip which you would cut down to size. You would need this twice (for the top & bottom. The number of upright strips is a personal preference, but a 4 meter wall would suit 6 uprights. Therefore the total number of strips required would be the pack of 13.
Ready Assemble Wall Molding Kit, Pre-Cut 4 cm Modern Frame Mouldings Wainscoting - Resistant Half Wall Panel - Peel&Stick, Customisable Wall Model: AD-020-S1 Get ready to give your home a fantastic makeover with our amazing Wall Moldings! These special decorations will easily transform any room and make it look super elegant. We offer different variety of styles and sizes for you to choose from. Whether you prefer a classic or modern design, we've got you covered! These moldings are made from strong and eco-friendly materials, so they won't get damaged easily. Do you have a bathroom or basement that needs a little love? No problem! Our paintable wall moldings are built to handle bumps and humidity, making them perfect for those tricky spaces. You can trust them to stand strong and beautiful for years to come. Worried about installation? Don't be! It's super easy. You can easily peel and stick these moldings to the wall and watch your walls come to life! For added durability, you can support it with silicone adhesive. After sticking, don't forget to strengthen the remaining gaps with mastic. If you want go ahead and paint them with any color you like. They'll happily wear their new look and match your room perfectly. And guess what? They'll arrive quickly if you're in the USA or Europe! These stunning paintable wall moldings will be the star of your room and your home will look so beautiful and stylish. So what are you waiting for? It's time to start transforming homes with our wall moldings today! Step into the world of elegance and style - shop now and make magic happen on your walls! For baseboard models see our models: https://www.etsy.com/shop/DekorosHomeDesign?ref=shop-header-name&listing_id=1531411076§ion_id=44022351
DIY Wall Molding Kit - Ready For Assembly Wall Paneling Kit - Wall Trim Kit - DIY Wall Molding - Wainscot Panels Decorative wall molding is an increasingly popular type of wall cladding. Such wall decorations look beautiful and are very universal. It is easy to assemble. It can be painted together with the wall. You can use them in a living room, bedroom and even in a hallway. Do you like this form of interior design? You can also use it in your home or apartment. Choose from our ready-made packages. Let's design it together if you want. Get inspired and let's create a beautiful wall covering. Our products; • Painted • Easy to clean • Waterproof • Flexible 10 pieces 62.99in 6pcs 55.12in 6pcs 23.62in 6pcs 15.75in 8pcs 31.50in 8pcs 23.62in 4pcs 70.87in a total of 12 rectangles, 6 large and 6 small The wall molding packages are ready for assembly. We will send it by cutting the edges that will be joined at the right angles. You will easily mount it on your wall with the installation instructions that will come out of the package. We are numbering each part of the patterns to help you understand how to follow the steps to get the final look. ***Self-adhesive wall is not molding. *****Pictures are examples of wall coverings made before To order in the size and shape you want; 1- Send us a photo of the wall where you will install your wall paneling, 2- Then let us know by accurately measuring the height and width of the wall, 3- Describe the style you like and send a corresponding explanatory picture, 4- According to the information and photo you send, we will prepare your project and send you a draft. after you confirmed the draft, we will prepare your order carefully and send it to you. ♥ Happy Shopping ♥