Hello everybody. Just wanted to share my box. My uncle is an architect and one year when I was a young boy he made us all wooden boxes for Christmas. I thought that was so neat, I still have it on...
Learn how to use sandpaper to round the edges on a wooden hinge for your woodworking projects.
I built a small cabinet with a door so I needed some hinges so I thought I would try make some wood hinges for the door. They will be made all of wood including the hinge pin. They are very strong and work well. I will show you step by step how I built them. In my wood pile I had some Brazilian cherry stair treads. I like the look of cherry and since it is a hardwood I thought they would work well for the hinges. They will be cut to a width of 3.5". I used my table saw sled to cut the blocks to the right dimensions for the 2 mounting parts of the hinge. I had to glue a couple of pieces together, this will give me large blocks to work with. They will be cut and shaped later to make a nice looking hinge. I clamped them and set them a side overnight. The pieces are marked and notched out carefully with the band saw. The pieces are tested for fit. They are not bad but I could have done better, although this does not matter when the hinge is complete. The two pieces of the hinge are clamped together and holes are drilled for the hinge pin. The hinge pin will be a 1/2 wooden dowel. It is easier to drill them now and later round the ends of the blocks. In order for the hinge to rotate the block ends have to be rounded. I did this first using the band saw then a belt sander. To keep things as accurate as possible it is best to pencil mark the round end and clean up using a belt sander. To make the shape of the hinge it is first cut lengthwise and cleaned up with the belt sander. More shaping the hinge. When all the pieces are sanded a half inch dowel is pounded into the hinge. It feels very tight at this point but will rotate easier in time. I also use a little bit of lubrication which helped a lot. Five holes are drilled in each hinge, this will be for carriage bolts. See video I used spacers to center the door and then drilled and installed the carriage bolts. After the bolts were tightened I tested it out and it worked perfect. See Also: Tool Caddy Spline Jig
SKILOCKERS IN EIKENHOUT Art.nr. unique/limitedp.o.a. jaar 2019 afmetingen 41 x 41 x 210 cm materiaal eiken / messing IMPRESSIES This post is also available in: EN
View woodworking projects, furniture plans, and more from the magazine's history and experts.
You can use metal hinges on the box, but I prefer to make my own out of the woods I’m using. You can use scrap wood to make them, and it’s just a few more cuts with the scroll saw. But it’s worth it to have perfectly matching hinges for your box! Rough out the hinges. Start by making two photocopies of the right view h
Designed by Podmakers Ltd, The Escape Pod is an elliptical, organic, rotating pod. An engineered, unique outdoor space which can be used as a garden office, studio, snug or retreat.
Today, I received my long awaited custom tenkara fly box made by Rick Setina. It's even more beautiful in person than the pictures he sent me in advance lead on. The lid is Maple and has my name in Japanese (katakana alphabet) burned into the lower right corner. The bottom is Cherry which contrasts nicely
Mortising for hinges is normally no big deal. But if the hinges are round, it introduces a challenge. Here's a quick way to deal with that problem
Shop hinges are a great way to make a piece customized to look smooth and streamlined. We take a look at what it takes to make this interesting hinge in detail.
Shop-made holding device promotes safe carving techniques By LaVerne “Sid” Sidler I strongly encourage all woodcarvers to secure their carvings with the use of a holding device, such as a carving arm. Holding devices secure the carving allowing the woodcarver to use both hands on the tool. This technique provides …
This invisible hinge is ideal when a flush, smooth surface with no visible hinge is required. The brass finished zinc hinge opens a full 180º and has a laminated link construction which reduces friction for smooth operations. Use for wood 3/4" or thicker wood and light load bearing applications. Works for boxes and small cabinets and for longer, wider applications. Length of the plate measures 1-3/4". Installation instructions and mounting screws included. Sold in pairs. Invisible hinge For panels 3/4" thick 1-3/4" plates Brass finished zinc Sold in pairs
How to select the correct hinge for boxes, cabinets, cupboards, doors, units and wardrobes. A guide to the different types of hinges
Curated by Ignacio García Leñero. Risk it for the biscuit. Product designer 1987 Madrid Based in Madrid INSTAGRAM: @Iglenero