I've been making these aprons forever. My kids use them ALL the time - in fact, if you've visited this blog more than a couple times, you've probably seen my kids wearing a variety of these things. I've made so many that I hardly even have to think about it anymore while I'm doing it. So it was a bit of a challenge to put a tutorial together as I made one - but I think it was worth it! At least, I hope it was! This is a great, quick project - and it's perfect for gift giving. I hope you enjoy it! (And if you blog about it or Pin it, be sure to link back to here! Thanks!) Here we go... Toddler Apron Sewing Tutorial (by Theresa @ ordinarylovely.blogspot.com) Materials NOTE: I am sorry. This pattern is no longer available. two coordinating fabrics, 1/2 yard of each 10 inches of coordinating ric-rac set of 3/4 inch D rings coordinating thread scissors, straight pins steam iron self-healing cutting mat and ruler, rotary cutter (helpful, but optional) NOTE: Seams are sewn at 1/4 inch except where noted. (1) Prewash and iron fabrics (2) Print out pdf pattern. Tape bottom of paper to the top of another 8 1/2 x 11 inch sheet. Cut along pattern lines. (3) Fold fabric for the front of the apron in half lengthwise. Place the side of the pattern labeled "FOLD" on the fold and pin in place. This is the fabric I used for the back. Please don't get confused by this. It's the only pic I got of the pinned pattern. (4) Cut out around the pattern. Do the same for the fabric your are using for the back of the apron. (5) From the "back" fabric, cut a 9 x 12 inch rectangle that will become the pocket. (6) Also from the "back fabric, cut these pieces: 3 rectangles 2 1/2 in. x 17 in. each 1 rectangle 2 1/2 in. x 5 in. here's everything cut out (7) Make the pocket. Fold the 9 x 12 rectangle in half, right sides together, so that it's 9 x 6. Press the fold. Sew around the three open edges, leaving 3 in. open at one end. Clip the corners. Turn the pocket right side out. Press the seams flat and press the opening in 1/4 inch, so that the side of the pocket is straight. Pin the opening so that you have a visual reminder of where it is. the opening pressed in with 1/4 in. seam Pin the ric-rac across the folded top of the pocket. Attach with a top stitch, being careful to tuck the excess under each of the ends so that it's caught by the stitches underneath. top - the ric-rac pinned on / middle - sewn on, front view / bottom - sewn on, back view (8) Make the neck and waist ties. On each of the 4 rectangle pieces, press down the top and bottom 1/4 inch each - I just eyeball the 1/4 inch. Then fold them in half, and press. On each of the three long pieces, open them back up and press one end like this... Fold it back up and press again, so that each long piece has one finished end. Sew all of the rectangle pieces closed. Sew along the open edges as close to the edge as possible - I'm usually at about 1/8 inch. Press all of them again to neaten them up. (9) Put together the neck piece with the D rings. Slide the D rings onto the shortest piece, approx 1 1/2 inches from the end. Fold the end in once and then twice as shown. Press and sew a strong line, backstitching at either end. (10) Attach the pocket to the front of the apron. Center the pocket one inch down from where the "arm" curvature ends - I used the ruler to measure both the inch down from the curve and to find the middle of the apron and pocket. Pin in place and sew the non-ric-rac sides to the apron, at 1/8 of an inch, backstitching at the beginning and end for strength. (10) Assemble the apron! Yeah, it goes that fast! Place the front of the apron face up on the table. Begin placing the neck straps and waist straps as shown. The parts that will eventually be visible when the apron is done, will be laying across the front of the apron. If you've never sewn something that you'll turn rightside out, this could be confusing. Just use the photos as a guide. It's a good idea to pin the straps in the center as well as on the sides to hold them in place while you're sewing. The waist ties may be so long that they need to be folded and then pinned out of the way. The bottom photo shows this, it's just a different apron so the material is different. Don't be thrown off! waist straps folded and pinned in center to keep them out of the way while sewing Next, lay the back of the apron on top of the front piece right sides together. Pin around the edges and top, but not the bottom. sorry, not a great photo Using the above picture as a guide, you will start sewing (using a 1/2 inch seam) in the bottom left corner. Sew up the side, around the "arm" area, across the top and down the other arm area and side. Backstitch at the beginning and end. Turn the apron rightside out through the bottom. Remove all pins, pull out the corners and press the seams. At the bottom, press the front and back in 1/2 in each, as shown. Now you will top stitch around the entire apron, starting across the bottom to close it up and going around the entire thing. I stitch in about 1/4 inch in. Be sure you don't accidentally sew any of the straps to the apron. Keep them pulled out to the right as they pass by the needle. Press the whole thing again, and YOU'RE DONE!! Make a couple more, put em on your kiddos and then head to the kitchen to make cookies or pumpkin pie with your cuties! Please let me know if anything is unclear or if you have any questions about the pattern or instructions. And of course, let me know how it turns out when you try it! Again, I'm happy for anyone to use the pattern and tutorial, but it sure would be nice if you'd link back to me here! Happy sewing! ps - I'm working on a tutorial for an easy baby quilt - but writing the tutorial doesn't seem to be as easy as sewing the quilt itself... check back soon to see if I get it all sorted out!