You're just about to makes your home to stand out from the neighborhood ! *** If your street name is longer than 12 letter+spaces message me for validation and maybe price adjustment. Good reasons to order this sign ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ - Thin and lean modern mid century minimalist style - Fully hidden automatic built-in dusk till dawn daylight sensor option available - Powerfull DOTLESS COB lights - Fully weatherproofed design ans strips - Long lasting (50 000+ hrs) LEDs - Great floating look with less notaceable light diffuser on the back - Easy to install especially with the Toolkit option - Hidden hardwire - It never rust and color doesn't fade under the sunlight - It can easily be painted - It can be tested on arrival with an included battery - Customizable How does the order process go ? ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ Easy ! After you've placed your order, I send a follow up message to discuss about your power setup and if you need one, I will offer you the ideal power adapter for your need (not included). At the ame time, I will show you the template with it's size, and make sure you get everything you need to fit your setup. You have three days to confirm, change or cancel your design and settings, or default settings will be applied. These are the same as in the main poduct picture and are listed bellow. Customizable settings ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ - Light color · Warm white 3000 K is the default color as seen in the first picture · 3700K, 3000K, 4000K (like last picture) and 6500K are also available · Red, gree, blue, yellow, orange, pink and even RGB options may be possible. Please message me. - Bar style · Extended to the left (default) · Extended to the right · Adjusted to the numbers · Bar on top also available - Sign color · Black (default) · Silver-like light gray - Font weight · Normal (Default) · Bold - Custom font can be submited, for a fee - Street name under the bar -> an extra fees will be charged if the lengh exceed 12 characters including spaces - Other nice options are available Options available from the drop down menu ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ - [Sensor] It comes built-in, already working and hidden inside your sign (highly recommended) - [Toolkit] Installation kit with helping tools and hole marking stencil (recommended) - Combined options. For example [Sensor + Toolkit] is the built-in daylight sensor and the toolkit. See more details about the toolkit there : https://www.etsy.com/DelleMaison/listing/925471248/ See more details about the sensor here : https://www.etsy.com/listing/822786282 Option available from other listings ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ - Power adapters, for all possible power setup (not included) - Longer wires (4 feet already included) - Extra standoffs/legs (nice to have for the 7" sign, included in 8" and larger signs) - Return bar for wall corner, backlit or not, at custom lengh. - Shapes addition like palm three, pineaple or something custom. Power requierement and configuration ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ The sign can accept 11 V to 12 V ***DC*** (ideally 11.5 V) and does not include any power adapter. It comes with a small testing battery to let you test the unit prior to install. I sell all necessary devices to adapt this to any power sources. We can discuss about the proper model for your specific setup. I also have dimmable solutions ! It can't be powered with betteries as these will be drained each one to three nights. A solar module with batteries inside is available and special lights are used inside the sign when that option is purchased with it. It works becasue the batteries are charged daily by the sun. ** Note that the built-in daylight sensor option is not the same thing as a solar power source. It's a small device sensing the presence of daylight and acting like a switch to turn ON or OFF the sign. Also, keep in mind that testing your sign with the sensor must be done in the dark or with a dark shadown casted on the sign (ex. with a cardbord placed over it). Installation ¯¯¯¯¯¯¯¯¯¯¯¯¯ Try your sign with the included testing battery. If you have the sensor, test it indoor not too far from a window play with the sign to make it see the daylight and then see the sensor working. Then, proceed to the installation. Put both included stainless steel screws in your wall. Let the unthreaded part (~½") out. Slide the sign over them, holding the sign by each underline bar ends. Do not exhert forces through a digit. In order to get your sign straight ans secured, the screws must be at the correct distance, leveled and straight. The Toolkit (optional) is made to help there. At the end, some force should be needed to slide the sign over the screws. Don't hesitate to contact me if you need help ! If you have extra standoffs/legs, there will be a paper sencil included for hole marking. The two main sliding legs, use raw screws, and flexible extra legs use cupped screws. Put all these screws on the wall. Slide the sign over the raw screws and verify everything else fits. Complete the wiring management and at when all is good then push/clip the flexible dilation friendly legs in the screw cups. No glue needed ! Also, keep in mind that testing your sign with the sensor must be done in the dark or with a dark shadown casted on the sign (ex. with a cardbord placed over it). Warranty ¯¯¯¯¯¯¯¯¯¯¯ There is a one year warranty that comes with the sign and it's conditional to the use of a proper DC voltage. Extend your warranty to 2 years by ordering one of my power adapter or module. Electricians decision to use miswiring or improper power adapter will void the warranty. Shipping ¯¯¯¯¯¯¯¯¯¯¯ Tracked packet 1-2 weeks for small to medium package, and Expedited ~1 week is used to ship to North America. Faster shipping method is available. Oversea shipping can vary in time depeding of the country. Other questions ? Feel free to ask, I usually answer fast. :) Communication ¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ This is a custom made product and communication between the seller and the buyer is mendatory. Follow up on your order will and must be made here though the Etsy messaging system. I can't call, or use your email address externally. After three days without answer, the process will through with default value shown in this description.
