Twisted Stripe Light Grey wallpaper Pattern Repeat: 237.1 mm wide by 887mm tall Bespoke self adhesive, removable and reposition-able fabric wallpaper. Get the look and feel of a traditional wallpaper without the fuss! No water, paste, or tradesman required. We recommend that you measure the height and width of your wall to check how much wallpaper is needed, before placing an order. Please don't hesitate to contact us if you are unsure, we are happy to help. It is best to add an extra 2 centimetres to each measurement as some walls aren't 100% straight. Then you can easily trim the wallpaper with a craft knife. Sizes available: 28" wide x 96" tall panel 28" wide x 100" tall panel Or order a sample (8" x 11"). Limit of 5 samples per customer please :) Choose from the sizes above or request a custom order if you require: Custom Size: Each wallpaper panel can be made to fit the height of your wall. Provide us with the height and width of the wall that requires wallpapering and we can make custom sized panels. We recommend adding an extra 2 centimetres to each measurement as some walls aren’t 100% straight. Then you can easily trim the wallpaper with a craft knife. Panels are usually made to approximately 70cm wide, so that they are easy to apply. We are happy to provide free quotes. Custom Colour: Select from our colour chart the colours that you would like the pattern to be made in. All of our wallpaper patterns can be made in custom colour ways as the wallpaper is made to order. We can change both the background colour and pattern colour/s. See our colour chart on each wallpaper patterns listing. Contact us via Etsy's messaging system to request a pattern mock-up or to order a custom coloured physical sample. Waterproof Coating: We can apply a clear, matte waterproof coating to the wallpaper. This allows the wallpaper to be wiped with a damp cloth. Without the waterproofing coat any cleaning product or water may damage the print. Although we don’t recommend using any cleaning products on it. Contact us via Etsy's messaging system to request a quote on waterproofing. Material: Our wallpaper is made with 100% polyester fabric and has a low-tack adhesive backing. Designs are printed with non-toxic ink. It is Class A1 fire rated in the US, non-toxic, green and phthalates free. Environmentally safe and bio-degradable over time. Vegan and cruelty free. UV protected. The wallpaper is not waterproofed. We can apply a waterproof coating during production for an additional cost. If you would like to cover existing wallpaper that is textured or walls that have ‘wash and wear’ 'low sheen’, ‘eco friendly’, ‘low VOC’ or ‘eggshell’ paint we highly recommend using our stronger wallpaper. This wallpaper is adjustable throughout the installation but will become permanent over time. If you need this option please send us a message and we will give you a quote. Colour Variance: We recommend that you order the full amount needed in one order. As with traditional wallpaper there can be slight variances in colour between batches. Installation: BC Magic Wallpaper is DIY friendly. It is quick and easy to apply or remove. Just peel and stick. The only tool you need is a pair of hands. For the best result ensure that the wall has been properly primed and painted before installing the wallpaper. Allow freshly painted walls to dry for a minimum of 1 month before applying BC Magic Wallpaper. Make sure that the wall is dry and free of dust and dirt. Avoid applying closely to any source of heat. We do not recommend applying the wallpaper to textured walls. We cannot guarantee that the adhesive will adhere correctly and the wall's texture may show through the material. Returns & Exchanges: Because BC Magic Wallpaper is custom made to order, they cannot be returned or refunded unless there is a manufacture fault present. We recommend ordering an A4 sized sample if you would like to see a small piece first.