This is a huge 2m diameter white concrete finished dining table with a 75mm top thickness. Finished with a 90mm x 90mm custom steel powder coated base. These tables can be used indoor or outdoor. 1.8m - $4950 1.7m - $4100 1.6m - $3450 Also shown, we hand make and do custom sizes with concrete bases and hardwood timber bases and matching bench seats too. Each concrete product is unique. When removing pieces from their moulds, they may have minor pinholes or bubbles along with other voids or character markings. These are not considered manufacturing defects, more a reflection of the handmade process of the concrete product; rather aesthetic. Care - like timber and stone, care is required for your concrete products. Our pieces are sealed with the best concrete products on the market but there are still substances that will impact the sealer and concrete surface, if they are not looked after correctly. Oil based or acidic products left on the concrete tops for some time, will eventually penetrate the sealer and subsequent concrete finish, possibly leaving a stain or blemish. Moisturiser, cleansers and sunscreen are known to be oil based and we suggest eliminating these products from your concrete surface. Spills must be wiped up after use on our surfaces. Do not scrub the concrete to clean the surface, a warm cloth should be sufficient. Please look under our 'tables' tab for our full range of dining tables. Freight - Pick up from Traralgon $300 delivery to Melbourne - conditions apply. Please contact us for interstate delivery costs, we use a removalist and it varies from state to state. Shipping Policy below. https://www.etsy.com/au/shop/KyashCubes/policy?ref=shopinfo_policies_leftnav Please note, images are stock photos and colour variations will occur as they're made to order.