To set up printing of pattern N521 on A4 sheets, use "Test Square No.2"! The test square is located on the first sheet in the pattern file. Coat pattern. Coat of a free cocoon-shaped silhouette, lined. Single cut sleeve on the front and back, the shape of sleeve along the upper seam is slightly rounded. The front is with cross cutting refilet pockets with two facings. The back is with an average seam. There is no collar. The garment is with a removable belt. The button standing clasp is central on two buttonholes and buttons. The stands have a wide overlap in the upper part and are oblique figured to the bottom of the garment. The length of ready-made garment by the average back seam without neckband and collar in size 44 at growth 164-170 is 85 cm. Total stitches shaping: by the chest is 36 cm, by hips is 21 cm. Fabric suggestion: Soft and thick coat fabrics; lining fabrics. Fabric consumption: Fabric width is 1,4m: fabric consumption of the top fabric is 2,8 m – 3,3 m, pattern pieces should be in expanded form; fabric consumption for lining is 1,8 m – 2,1 m, pattern pieces of lining should be in expanded form for economy of fabric. Pattern is given with seam allowances. Degree of difficulty - "Advanced Beginner" Sewing instruction is attached to the pattern (description of the tailoring and the necessary consumption of fabric, materials and accessories). The pattern in your order is in two print options: 1. For printing on A4. It is necessary to print out a pattern on an ordinary printer on A4 sheets, then glue the sheets, cut out the pattern and you can sew! 2. For printing on a large-scale plotter. The patterns of top are located on a 2 sheet measuring 60*155 cm. The patterns of lining are located on a sheet measuring 60*119 cm. Presented a photo from Internet for visual demonstration of pattern №521 To create this pattern, we were inspired by photos from the Internet. These photos were "inspired" for us, because we are not pursuing the goal of completely repeating what we saw: on the contrary, our goal is the creation of a unique product. The model of the product may differ from the photo from the original source, the exact image of the model is shown in the technical drawing.
