I've been asked how we attach the wire to the ball chain in the large textured tube beads in my Textured Tubes & More tutorial. To make a ceiling fan/light pull you need some ball chain, couplings and adapters (in silver below right) that provide a way to connect your wire that is attached to your bead to the ball chain. We had a difficult time finding the adapters and so I improvised a little and will show you a method that I use. Supplies needed: * A large bead with a large hole or one that you can drill a hole in at the top * Ball chain * Heavy 18 or 16 gauge wire in the same color to match your chain * Two couplings that fit the ball chain * Strong metal bead or bead cap * Round nose pliers * Wire cutters (heavy duty type) * Drill bit - 5/32" or 4 mm (optional) 1. Cut a piece of wire long enough that will go through your bead plus extra for finishing at the bottom end. With your round nose pliers, make a small loop at the one end like you are making an eye pin. You want a nice tight loop that will fit inside one of the couplings. It doesn't have to look pretty as it won't be seen afterwards. 2. Insert your wire into one of the couplings from the inside going out as shown: 3. Attach the ball chain to the opposite end of the coupling 4. You can make a large hole at the top of your bead before baking or drill it larger afterwards, whichever you prefer. Make sure the hole is only large at the top part of your bead and not all the way through. It should also be deep enough to hide the coupling end of the ball chain. 5. Insert the wire through the top of the bead so the wire comes out the bottom end. 6. Pull it all the way through until the coupling is hidden inside the top making sure it is nice and snug. 7. Add a bead or bead cap to the bottom and then loop your wire. The bead acts as a "washer" to anchor your wire and your bead on. 8. Hang a decorative bead or dangle from the wire loop to finish it off. 9. Attach the other coupling to the opposite end of the ball chain and your fan/light pull is ready to hang! Have fun and enjoy!