Last year, the great folks at Elegoo sent me one of their great Arduino Robot Kit Version 1.0. I already posted Assembly Instructions, and some tutorials on programming it. Couple of month later, they introduced improved Smart Car Arduino Robot KIT Version 2.0 , and also sent me one :-). I posted Assembly Instructions for it too :-). I also mapped the Shield in Visuino , and started work on tutorials. Elegoo did not stop there however, and few weeks ago I received the Latest Version 3 Arduino Robot Kit donated for the Visuino development! I already posted: Unboxing video Step 1: Installing the Motors on the Chassis Step 2: Installing and Connecting The Motor Driver Board Step 3: Installing The Line Tracking Sensor Board on the Chassis Step 4: Installing The Arduino and Sensor Shield Boards on the Chassis Step 5: Installing The Battery Box on the Chassis Step 6: Installing the Servo turning the Ultrasonic Ranger Step 7: Assembling and Installing the Obstacle Avoidance Ultrasonic Ranger Step 8: Connecting the boards, and joining the 2 layers of the Chassis together Step 9: Installing the Wheels Here is the 10th Assembly Video - Charging and Installing the Batteries: I am preparing the rest of the Assembly videos and will post them in the following days. I have also started mapping the Robot's Shield functionality in Visuino, and hope to have improved support in few days. After that I will try to make some Visuino tutorials for the Robot. Cheers, Boian #Visuino #Arduino #Elegoo #Robot