When I made my Named clothing Helmi dress, I decided I needed to make the blouse version as well. The original pattern has some trench coat inspired details but I wanted really to find a good pattern for a loose fitting shirt. For the fabric, I chose this simple black and white stripy viscose fabric. I had written down that the dress I made was a bit tight across the bust. So, for the first time in my life, I made a full bust adjustment. I didn’t want to go up to the next size since the pattern otherwise fitted pretty well. The full bust adjustment made my side seams different lengths and I tried to correct this. However, I miscalculated and the back piece ended up being an inch longer. Rather than correcting it, I decided that it looked good and left it like it was. Then there was the fact that I wanted proper cuffs for the shirt. Since this was a Named pattern I figured out that I could probably use the sleeve from another Named pattern. The Saraste dress from the book Breaking the pattern had the sleeve I needed, except that it had the seam at an unusual position. I took the length of the sleeve, the vent and the cuff and otherwise left the original sleeve as it was. I paid attention to the pattern matching, so I could use the stripy pattern to help me to press the front buttoning placket. That really helped since the viscose was really shifty. I like the finished Helmi blouse but there are some little things that I want to correct for the next version. I think that the collar could be a bit more snug and just a tiny bit smaller. I could also improve the drape of the sleeve cap that gets wrinkly when I lower my arms. An inch more length might also be nice. This is all for today. I hope you liked this post and subscribe if you want to follow me on my sewing adventures! Happy sewing! Katja