Hello krafty friends! Krafty Girl Danielle here with a photo tutorial on the bokeh technique. WARNING - this is very photo intensive as I've not had much luck at all with videos of late. But it should be pretty easy to follow. Additional warning - a couple of my photos are blurry as I was trying to take the pic with my left hand while still demonstrating the step with my right - LOL. Boy did I miss my daughter that day for her help!! Anyhoo..... first let me show you the finished card - using the ADORABLE clown from the NEWEST release at Kraftin' Kimmie called "YOU'RE A SCREAM!" and then I'll start into the steps on how to make it. Products you need for this project are: watercolor paper or glossy cardstock paint brushes and water & papertowels masking/stencil/painter's tape watercolor paints or distress/regular ink refills ink pads (distress or regular) and white craft (or StazOn) circle template, sponges or sponge dauber, solid circle stamp in a couple sizes heat gun (preferable if you don't want to wait for project to dry) Step One: Start with a piece of watercolor paper. You can also use glossy cardstock but today I'm using watercolor paper. I'm using a panel sized 5 x 5 1/2" which I will trim down when I'm done. It's really helpful to secure your paper to the surface you're working on. I'm using painter's masking tape. The paper will buckle a bit as you are coloring it so the tape helps to keep it flat and in place. You can put a piece of wax paper under your panel to help with the watercolor seep-through that might occur (if you're kind of messy like I am - LOL). Step TWO: Prepare your watercolor supplies. I used 3 different shades of blue on my panel - Pool Party, Baja Breeze and Island Indigo. The amount of ink you use depends on how deep you want the color to be on the panel. Typically I use between 5 and 8 drops of ink one little well of this paint tray. Step THREE: Prepare your panel by using just clear water - give it a good generous coating all over. Step FOUR: Now start adding your base color(s) I first swoosh the lightest ink around and then go back and swoosh in some more of the darker shade in just a few areas. It's very subtle but does create more depth in the panel. Step FIVE: When you are happy with the base colors, dab it off with a paper towel (see how messy I am :o) ? ). Step SIX: Using a solid circle stamp or two (or circle stencil) add some darker spots to the panel. Note: I save the insides of my stamps that have pop out middles for this - works great as it's kind of hard to find solid circle stamps. I first used a larger circle rubber stamp in a few areas on the panel. Because the paper is a bit dry the ink will appear appear kind of dark so I will use the deeper shade of blue that I made and softly blur the circle and shape and edges later. Then I randomly stamped the smaller circle around the panel to fill in the spaces a bit more and add depth to the base. Then I take the lighter shade of blue and give it a final wash-over to blur and blend the circles. Step SEVEN: Once again dab off with a paper towel and then if you have a heat gun use it to dry the panel for the next steps. Note: if you don't have a heat gun you will want to wait about an hour before you start the next steps (longer if you're using glossy cardstock). Here's a photo of the different finishes you will get with a watercolor panel (left) and glossy cardstock (right) Step EIGHT: Now we are going to add the bokeh effect dots with white craft ink, a sponge dauber and a circle stencil. I've made my own circle stencil using various sizes of circle punches in a random pattern and a clear window sheet from some product packaging. You can also use the end of a pencil eraser, a sponge dauber, or a circle stamp for this step. Tip: I found it works best if you start at one end (corner or side) and work away from it as you fill in the circles as craft ink is pretty sticky and you can accidentally pick up the edges from the one before and and mess up your pattern. To create the bokeh effect you will fill in the different sizes of circles around the panel. The larger circles should have less ink on them and be a bit blurred as they are the farthest out of focus and the smallest circles will have the most saturated color (because they would be closest in the photo as spots of light). Step NINE: Craft ink is very sticky and takes a long time to dry (even on watercolor paper) so I use a heat gun again (I'll spare you that boring picture - hehe) to set the color again. StazOn ink will dry much faster but I like the results I get with the craft ink. When you've dried it you can take off your masking. and you get something that looks like this Step TEN: If you've done a really good job of masking (or not been really messy like me) you can trim the panel to leave a small white edge around it. I have taken the pane and trimmed it down to 4" x 5 1/4" with my paper cutter to get this Final Step(s): Take your bokeh panel and add your images (or sentiments) and adhere it to a mat and/or your card base to finish your project like I did here with the yellow card stock and add a few fun embellishments like the Doodlebug sprinkle dots (available in the Kraftin' Kimmie Shop) for extra pop to the project. Ta Dah - DONE!!! Easy peasy - right ? Thanks so much for sticking with me to see my tutorial. I hope it was clear and easy to follow and that I've inspired you to go get inky and give it a try too!