How To Adjust The Time Of Your Grandfather Clock of your grandfather clock. Regulate the grandfather clock if it is too fast or too slow.

My Clock has Stopped. There are 4 things that you can check to see if the problem is something that you can fix yourself.

North Coast Imports is the best solution to providing cuckoo clocks of the best quality with the best service. We have 53 years experience. We go on to prove our excellence by providing the following answers to frequently asked questions. For further reference take a look at the sketch below. "My cuckoo calls three times and it's four o'clock." or "How can I get my cuckoo to call the correct amount of times on the hour?" ANSWER: This is a really simple fix. 1. Slowly turn the minute hand clockwise until the clock calls. If it calls once, let it finish and then proceed until it calls again. Count the number of times the cuckoo calls. 2. Carefully move the hour hand to the correct hour according to how many calls you just heard. For example, if it chimed 3 times, move it to the 3:00 position. 3. The hour hand is a friction fit on the hour-hand cannon. Press down on the base of the hand to firmly fix it in place. 4. When setting the clock, remember not to touch the hour hand again. Just move the minute hand counterclockwise to the correct time. In other words, it is better to move the minute hand backwards until you reach the correct time. If you only move the minute hand, the hour hand will follow along slowly. "My hour hand is always pointing to the six." or "Why won't my hour hand move?" ANSWER: The hour hand simply came loose and you will have to secure it more firmly onto the hour-hand cannon. Follow the instructions above to make sure you have the hour hand pointing to the correct number. Be sure to slide the hour hand back (towards the dial of the clock) so that it fits snuggly. It is best to use your thumbnails on the round part of the hour hand. Don't push on the tip of the hour hand as this may cause breakage. "My cuckoo calls multiple times on the half hour and only once on the hour." or "How can I correct the way my cuckoo clock chimes?" ANSWER: You will need to loosen the threaded hand nut on the end of the hand shaft. The minute hand is sandwiched between this nut and the locking nut. Carefully loosen or remove the hand nut so that you can freely move the minute hand without turning the locking nut. Turn the minute hand to a point 180 degrees ahead (or behind) and refasten the hand nut.

How to move a grandfather clock by following these easy steps and you are on your way to moving your Grandfather clock

If your grandfather clock chimes the wrong hour, this will be a quick fix to set it correctly and your clock will be in perfect hour sync.

Putting a clock in beat Ticks then stops No ticking at all Working with Mainsprings Chiming the wrong time Setting up quarterly chime Cleaning without

The torque supplied by the weights attached to the chains of a grandfather clock is necessary to operate the time, strike and chime features.

Putting a clock in beat Ticks then stops No ticking at all Working with Mainsprings Chiming the wrong time Setting up quarterly chime Cleaning without

With over 550 black-and-white illustrations and an approach that assumes no prior watch-repairing experience, Donald de Carle's classic book is essential for any beginner or experienced horologist. It's been called the best illustrated book on practical horology ever written--Horological Journal The absorbing and everlasting subject of watch repairing has been dealt with in books in many languages throughout the years. But when Practical Watch Repairing was first published in the middle of the twentieth century, he intended to create a book that a watchmaker can understand, even if he can't read. For the readers in his audience, de Carle has provided well-informed discourse on every topic a watchmaker, or aspiring watchmaker, needs to know. He covers: Workshop and WorkbenchEssential ToolsCase, Dial, and HandsBarrel and MainspringHand Cleaning and OilingSpringing and TimingFriction JewellingAnd much more With Practical Watch Repairing, even a layman can become a watch-repair specialist. Author: Donald De Carle Publisher: Skyhorse Publishing Published: 09/17/2008 Pages: 336 Binding Type: Paperback Weight: 0.95lbs Size: 8.90h x 6.00w x 1.00d ISBN: 9781602393578

A Tempus Fugit Grandfather clock is made like any other Grandfather clock, only they were made in Asia, and not in America or Germany. The mechanisms within the clock are the same, for they have a pendulum, chimes, face, hands and inner mechanisms that work in synchronized order within the clock allowing it to ...

Description Our clock hands and motor kit is made of aluminum and plastic materials, durable and safe to use. They have a good manufacturing process and have long service life. They are easy to use, easy to DIY install, and very suitable for helping you DIY repair or making a wall clock. Features -Color: Light Green. -Material: Aluminum, plastic. -Size: About 13.50X12.50X4.00cm/5.31X4.91X1.57in. - Note: not included battery. - Made of aluminum and plastic, safe and durable, lightweight, can be applied for a long time. - Clock hands and mechanism kit, perfect for clock replacement, repairing all kinds of clocks. - Not only can be used for DIY clocks, but also an excellent repair and replacement, very practical. - The simple and stylish design makes it fashionable and versatile, which can be applied to your DIY design very well. - Suitable for repairing, replacing the broken parts of a clock or serving as good handwork material to make a clock by yourself. - Suitable for craft clocks, frame-less wall clocks, especially for DIY wall clock to replace for using. Size: 13.5X12.5CM. Color: Multicolor.

Putting a clock in beat Ticks then stops No ticking at all Working with Mainsprings Chiming the wrong time Setting up quarterly chime Cleaning without

Putting a clock in beat Ticks then stops No ticking at all Working with Mainsprings Chiming the wrong time Setting up quarterly chime Cleaning without

Grandfather clock weights are the engine driving the timing mechanism. Clocks have three weights. They must be installed in their correct order. Drop weights to their lowest level by not winding the clock or advance the minute hand until the weights are at the bottom of the case.