I had several people ask how my scalloped round card for CPS Sketch 66 was made, so I made another card and took some pictures for you. Hope this helps! First, I measured across my largest Spellbinders large petite scalloped circle die at its center point (measured its diameter). It was 4" across, so I knew that to get a gate-fold card that was hinged on the scallops, I would need to cut a piece of cardstock slightly smaller than double the width of the die-- 7-7/8" x about 4-1/4". (The same principles work at any size. If you are using a Coluzzle circle template, measure your circle, then cut your cardstock about 1/8" less than your circle diameter if you want to have a gate-fold hinge.) My cardstock was scored at approximately 1-15/16" in from both sides. You can see the score marks in the picture above. I folded...