One size fits all same size Doll, and curvy to. Super in trendy now white boots! Get your dolls fashionable with this amazing collection! Includes all optional! Doll and other accessories are not included!
Bezoek het bericht voor meer.
I Finally purchased this from Australia Ebay and it was only $25.00 + $5.00 postage!!! They never released this 18 pair shoe pack in Australia and black shoes so don't stand out on a black doll! I can't wait to get the Camel Accessory Pack for my Black Barbie basics dolls!
Después de ver estos mini zapatos, posiblemente termines envidiando a Barbie.
Explore emmalou ♥'s 27 photos on Flickr!
Yayyy finally real shoe's for our dolls! All fit dolls mentioned! Pick a pair!
Fashion doll size platform shoes, fits most 11.5” dolls, BJD, ankle strap, fits poppy Parker, These fit most but may not fit your specific doll We ship same day if ordered by 1 PM Check out more in our shop: Partydollfashionshop.Etsy.com
Explore Trotilla's 349 photos on Flickr!
Barbie doll has a shoe collection to step out in style -- whatever the look or occasion. With five pairs of shoes in each of these accessory packs (doll sold separately), it's easy to find the right pair to style a doll and explore a dream. Young imaginations will love finding the perfect pieces to fit their style and tell their stories! Includes five pairs of shoes fitted to Barbie dolls of original/petite body type; doll not included. Each shoe pack sold separately, subject to availability. Flat shoes fit dolls with articulated ankles or flat feet. Colors and decorations may vary.
Barbie Doll Shoes - Where to find Designer Barbie doll shoes and clothing online
Explore **BarbieLover**'s 137 photos on Flickr!
Después de ver estos mini zapatos, posiblemente termines envidiando a Barbie.
I haven't been making any shoes for months due to too much work, too hot weather in summer and a general lack of energy and motivation. However, I am trying to continue writing the book, so there will probably be some blog postings as well. The shoes I made this time are made of silver-colored leather. As leather is thick material, making a neat toe part requires some stretching, so I decided to use polymer clay to make fillers for the toe parts to help them keep their shape. The leather pieces for the toe parts were easy to cut as only one edge need to be finished at the cutting stage. The rest goes under the insole and will be trimmed during the gluing process. When gluing the uppers in place, the first parts to glue are the tip and the first flaps on the sides. Then cut flaps in the middle of the sides and glue them in place. These will anchor the uppers in place and the rest of the flaps will be easier to cut and glue. Here all flaps are glued in place. The most important thing is to ensure there is no overlapping as that will show as bumps in the outer soles. The heels are pieces of round wooden strips covered with the same leather and enough excess left to reach to the edges of the insoles. Usually there is no need to have this much excess, but these heels were a lot narrower than the width of the sole. The only way to find out the right amount is to try the heels in place, cut a little, try again, cut more if necessary, and repeat as many times as needed. Here the heels are in place. The seam is a bit higher than I would normally place it, but I had to cover some unevenness in the part where the upper was turned under the insole. I used leftover pieces of the leather to fill the underside of the insole. This ensures that the outer soles will be even. The leather I used for the outer soles was fairly thin, so any depressions would have shown if I hadn't done this. The finished shoes have a hole in the strap and a small bead in the opposite part to close the strap.
At last! I made shoes, complete and functional, and there are two of them! My quest for doll shoes began eight years ago, when mom bought my first Barbie. It was from a beach series and didn't have shoes, so I wanted very much to make them myself. These were my attempts: - court shoes from paper, with nail polish and silver thread (disintegrated) - velvet boots with no heel and no shape, assembled in 5 minutes (terrible) - boot from a fake leather belt, almost finished but couldn't get the second to match and I didn't like it anyway (in the garbage) - proper boot, first successful footwear, but I have yet to make the other one... I will dedicate a detailed post to these, especially that last boot. Now let's see how my MH shoes came to life. MH was a good choice for two reasons. One, the feet are quite big and easy to work with, and two, I find them really ugly. I mean, what is with the splayed toes? My Draculaura had beach sandals. I have a thing against footwear with open toes. Especially on feet like that. Grrr. Needed new shoes asap. I opted for these rounded ones with an ankle strap, which I decided would be simple enough to make and worked with the Lolita vibe I'm getting from this doll. I was familiar with this wonderful blog about shoes and I was very eager to apply some of the things I learned from there. Tarja’s method of making shoes was very different from anything I had tried before. All the things I was doing wrong were causing a lot of frustration. I used to cut all the details and try to piece them together on the foot, shaping the sole and everything at the same time. Tarja makes stiff insoles and outsoles beforehand, which seems like common sense, right? When you start gluing tiny stubborn details to each other, you run out of hands and having the soles nice and ready really helps! Seriously, if you want to make doll shoes and don’t know how, just go to her blog already. I’ll forgive you if you forget to return. Here is the link again. You’re welcome. Edit 22/01/2014: I can't believe I found the very first pair of shoes I made for Barbie! The heel was cut from a matchstick and due to the bumpy surface of the sole (I didn't realise it could be sanded) I couldn't get it to stick securely. Instead of widening the contact point somehow, I kept piling more glue. It fell off. See for yourselves and learn from my mistakes: Now, back to my shoes. I didn’t copy Tarja’s method. There are many things I made up as I went, and I didn’t take pictures of the process. In fact, I was surprised to see it worked. I’ll describe what I did in a few words, and a proper tutorial will follow in a different post. I do have a pattern and intructions for the strap closure, which can be adapted for chokers and clothes as well. First, I drew the sole pattern by sticking masking tape to the foot and outlining right there on the sticky side. I made the insole with cardboard and paper glued to each other with PVA. Before the glue set, I bent it to the curve of the foot. My sole was longer at the toes to allow for a rounded tip. When the insole dried, I attached it to the foot with more masking tape on which I drew the upper part. Now my pattern was complete: This image is exactly 10cm at 300dpi. I drew an inch too. I hope this helps because I have no idea how printers work. The triangles mark the parts that are glued under the sole. I cut these details from thin leather, like for gloves. It was really stretchy and messed with my pattern; I had to cut a piece twice. I glued these with PVA as well, as advised by Tarja. Ideally, the sole should be secured to the foot during this step, but I honestly can't remember if I did so. The centre is glued first, then the next triangles on each side. I filled the gaps on the sole with leather scraps to make it level. Then I used bits of cotton wool soaked in PVA to stuff the toes. I made outsoles a little bigger than the insoles, but when I tried one on a shoe, I hated it. The edge stuck out way too much, Doc Martens style. After some trimming, I ditched them altogether and decided to use the insole pattern for the outsole as well, and it looked fine. Next time I'll just make it a bit longer. I glued paper to the cardboard sole and shaped it on the foot. As I was assembling the shoe, I had a lightbulb moment. The paper layer was on the underside of the sole; I bent the hanging edges up towards the shoe, and the resulting paper "cup" wrapped all the messy cardboard! I glued the edges and let it dry. To make the heel, I used a piece of a bamboo skewer. I wanted the upper part of the heel to be fatter. I tried to fill it with wood putty, then cotton wool with glue. Neither worked. In the end, I did it with just 4 strips of paper and glue... I will explain how to do this in another post with pictures, I promise! (update: here it is: sole tutorial) When everything was dry, I adjusted the heel and sanded the bumps with a nail file. I smoothed with glue, then painted everything with two coats of acrylic paint. If I had matte varnish, I would have used that too. The hook closure For the strap, I wanted an elastic with seed beads on it. I tried and it didn't look good. I had to make a strap that closed. I set for a hook-and-loop. The hook is a bent piece of thin wire. Mine are leftovers from head pins. Like this: I bent it really well with pliers: The straps are leather strips with tapered ends. Getting them even was a major pain. Next time I'll make them wider because one of them ripped when I inserted the hook. The hook goes into a hole near the end: Do not use your thumb like this :) I pushed the hook so the ends came out on the wrong side and bent them in a "T" shape: Ignore my nails. Different day. I snipped the excess wire and glued the end of the strap over. I used a rubbery glue that dries flexible. I bent the wire towards the wrong side to create the hook: I measured the strap on the doll and marked the place for the loop. My loops are simply 3mm jump rings through which I threaded and glued to the strap. I forgot to take a picture, but here is what they look like on the finished shoes: The thin part of the heel piece is folded to the inside and glued over the ankle strap. For some reason, it took me at least ten tries to get the correct placement. I even managed to glue a strap upside down twice. The picture shows the shoes after I painted and varnished a part of the insole that is visible while on the doll. I was so excited to have finished that I smudged some varnish and had to reapply it -_- Aaaanyway, time for showoff! As you see, the shoes fit well and the doll can stand unaided in them. The thin leather stretches like crazy and is already pretty loose after all the handling, especially the heel. I will have to look into ways to stop it from stretching (fusible interface maybe?). Regardless, I'm happy with how these turned out. So what do you think? Are you interested to find out how I made the heels? Do you have suggestions for improvement? I'd love to hear back from you. Love, The BlackKitty (^^)~
The next video is now in YouTube and this time things didn't go as planned, because I was using new material. The first experiment with it w...
Melissa Posh + Barbie Rosa 35703R . Compre com segurança, parcelamos sua compra em até 10x sem juros. Aproveite o Frete Grátis*.
Item specificsConditionUsed: An item that has been previously used. See the seller’s listing for full details and ... Read moreabout the conditionUsed: An item that has been previously used. See the seller’s listing for full details and description of any imperfections. See all condition definitionsopens in a new window or tab BrandMattelTypeShoesClothing TypeBoots, ShoesOccasionWeddingSet IncludesShoesFranchisebarbie
Fisdy – Barbie Doll Heads Embellished Vintage Chunky Heel Mary Jane Shoes
Explore Trotilla's 349 photos on Flickr!
Explore Daga Mara's 644 photos on Flickr!
