The Buster + Punch Complete Dimmer Switch is made from solid metal with a diamond cut knurled knob available in White, Black, Steel, Smoked Bronze, or Brass. Dims halogen (10-600 watt) incandescent, and most LED (5-150 watt) loads. The Complete Dimmer includes push On/Off rotary dimmer module compatible with 3-way switching, wall plate, and detail kit. Note: Dimmable with leading edge (TRIAC) dimmers. Does not dim with MLV or 0-10V dimmers. See attached manufacturer spec for more information. Disclaimer: Only one dimmer should be used per 3-way circuit; 2 Gang Dimmers should not share a 3-way circuit.
Product Description Dim or brighten the room, toggle light scenes, or get the best light based on the time of day. The Hue dimmer switch attaches to walls or magnetic surfaces, but can also be used as a remote control anywhere in your home.
The Buster + Punch Complete Dimmer Switch is made from solid metal with a diamond cut knurled knob available in White, Black, Steel, Smoked Bronze, or Brass. Dims halogen (10-600 watt) incandescent, and most LED (5-150 watt) loads. The Complete Dimmer includes push On/Off rotary dimmer module compatible with 3-way switching, wall plate, and detail kit. Note: Dimmable with leading edge (TRIAC) dimmers. Does not dim with MLV or 0-10V dimmers. See attached manufacturer spec for more information. Disclaimer: Only one dimmer should be used per 3-way circuit; 2 Gang Dimmers should not share a 3-way circuit.
Experience the perfect fusion of functionality and classic design with Forbes & Lomax's Combination Rotary Dimmer and Toggle Switches. This elegant solution merges the timeless charm of 1930s brass and nickel switch designs with modern practicality. Each set features a smoothly adjustable rotary dimmer alongside a straightforward toggle switch, delivering both ease of use and a refined aesthetic. Designed for versatility, these combination switches cater to diverse lighting needs. The rotary dimmer is capable of managing up to 120 watts of LED lighting, ensuring smooth control over your lighting ambiance. The robust toggle switches are available in both 3-way and single pole configurations, rated at 15 amps for reliable performance. Standard sets include 3-way Toggles, with the option to wire them as single-pole. Additionally, 4-way Toggles are available on request. It's important to note that in 3-way or 4-way circuits, dimming is possible from one location only, with the remaining switches functioning as non-dimming Toggles. Toggles and Dimmers can be interchanged on the plates, allowing for customized configurations during installation to suit your specific needs. To ensure the combination switch seamlessly integrates with your lighting system, we recommend providing your light specifications before purchase, especially for lights with higher wattages or unique requirements. This proactive step guarantees the switch operates effectively with your lighting setup. For personalized configurations, email [email protected] any specifications/ plans/ schedules for a customized, efficient lighting solution tailored just for you. Specifications Switch Diameter: Ø 20 mm (0.79”)Knob Diameter: Ø 20 mm (0.79”) Plate Sizes:1 Gang Plate: W 70 mm (2.76”) X H 115 mm (4.53”)2 Gang Plate: 115 mm (4.53”) X 115 mm (4.53”)3 Gang Plate: W 162 mm (6.38”) X 115 mm (4.53”)4 Gang Plate: W 210mm (8.27”) X 115 mm (4.53”) Reminder: For plates combining toggle switches and rotary dimmers, the layout of elements can be adjusted on-site during installation to suit your requirements. Available for Line Voltage (For use in conventionally wired installations) 3-way, 15A (also works as Single-Pole) LED: Max. 120W LED or 300W Incandescent/Halogen Other options available by custom quote Custom Quote Options: Incandescent: Max. 500W Incandescent/Halogen MLV Max. 600VA Magnetic Low Voltage Halogen 0-10V (Linear): Max. 20 0-10V Dimmable Drivers Non-Dimming: Max. 720W Any load types (ON/OFF only) See full Technical Specification sheets below. Important Notes Toggle switches conform to UL 20 and are certified to CSA C22.2 No.111. Toggle Switches install into standard junction boxes but the boxes must be recessed below the finished wall surface by at least 1/8". Rotary dimmers conform to UL 1472 and are certified to CSA C22.2 No.184. LED dimmers are Forward Phase Triac dimmers, designed to control up to 120W of LED bulbs or 300W of incandescent bulbs. Please review and ensure all certifications are applicable for your local code. If unsure, please send our Sales Team full SPECS of lighting for a compatibility review. Must be installed by a licensed electrician. Areas of application: Light-duty Commercial, Residential Material(s) Unlacquered Brass Aged Brass Nickel Silver Brushed Stainless Steel Antique Bronze Note: materials will slowly age or oxidize over time. Wipe clean with a dry, non-abrasive microfiber cloth. Avoid use of chemical or alcohol based cleaners. Refer to the care guide below for best practices. Product Downloads Toggle Switch Product Sheet Toggle Switch Installation Guide Forbes and Lomax Brochure Forbes and Lomax Care Guide
Vintage Brass Finish Toggle & Dimmer Light Switch - 1 Gang Plate for Dual Lighting Control Elevate your home's lighting with our elegantly designed Toggle and Dimmer Light Switch, featuring a luxurious vintage brass finish. This versatile 1 Gang plate is expertly crafted to accommodate two separate lighting circuits, offering a seamless blend of functionality and style. Whether you're looking to create ambiance or need practical lighting solutions, our switch plate has got you covered. Key Features: Vintage Brass Finish: Adds a touch of sophistication to any room, complementing both traditional and modern decor. Dual Functionality: Equipped with one single-pole dimmer and one 3-way toggle, this switch plate offers versatile lighting options. The dimmer allows for smooth ON/OFF operations and dimming capabilities, perfect for setting the mood or reducing energy consumption. The toggle switch, certified with CE, can be wired as a single pole or 3-way, providing ON/OFF control for enhanced convenience. 1 Gang Plate Design: Specifically designed for a 1 gang box, this plate supports two separated lights, making it ideal for various room settings and lighting needs. Safety Certifications: With the dimmer featuring UL certification and the toggle switch boasting CE certification, you can trust in the safety and quality of your lighting control. Easy Installation: Designed for hassle-free installation, this switch plate is a perfect upgrade for DIY enthusiasts and professionals alike. Enhance your home's lighting with our Toggle & Dimmer Light Switch. Not only does it offer superior control and versatility, but its vintage brass finish also adds a timeless elegance to your space. Ideal for those who appreciate the blend of functionality and style, this switch plate ensures that your lighting solutions are both effective and aesthetically pleasing. Upgrade your home lighting with our Vintage Brass Finish Toggle & Dimmer Light Switch - the perfect blend of elegance, functionality, and safety.
Installing a dimmer switch is really pretty easy! See how we did it in this post about how to install a dimmer switch!
Here's a simple-but-illuminating electrical project that we took on to kick off the transformation of our third bedroom into a nursery.
There's more to these switches than "on" and "off." Select the right light switch for your space with our guide to the types to know.
Description Forbes & Lomax’s Rotary Dimmers push to switch on and off and rotate to dim and brighten. The dimmers are based on the elegant nickel and brass switches of the 1930s. These simple, timeless dimmers are a refined detail in any interior. Rotary Dimmers, Toggle Switches, and Push Buttons can be configured on the same plate for a customized control solution. To guarantee compatibility, especially with higher wattage lights, lights with transformers or drivers, or fixtures with non-replaceable LEDs, please email or upload the light specifications before purchase. Custom configurations can be facilitated by contacting customer support and uploading the specifications via the button above. Established in 1987, Forbes & Lomax is a UK based company with a reputation for high quality design amongst architects and designers. Specifications Knob: Ø 20 mm (0.79”) 1 Gang Plate: W 70 mm (2.76”) X H 115 mm (4.53”)2 Gang Plate: 115 mm (4.53”) X 115 mm (4.53”)3 Gang Plate: W 162 mm (6.38”) X 115 mm (4.53”)4 Gang Plate: W 210mm (8.27”) X 115 mm (4.53”) Available for: LED: Max. 120W LED or 300W Incandescent/Halogen Incandescent: Max. 500W Incandescent/Halogen MLV Max. 600VA Magnetic Low Voltage Halogen (contact us) 0-10V (Linear): Max. 20 0-10V Dimmable Drivers (contact us) Non-Dimming: Max. 720W Any load types (ON/OFF only) (contact us) See full Technical Specification sheets below. Important Notes: Rotary dimmers conform to UL 1472 and are certified to CSA C22.2 No.184. Please review and ensure all certifications are applicable for your local code. If unsure, please send our Sales Team full SPECS of lighting for a compatibility review. Must be installed by a licensed electrician. The dimmers are all supplied as 3-way and can also be used as single pole. A dimmer can only be wired at one locations on a three-way or four-way circuit. The other locations need to be non-dimming Toggle Switches. LED dimmers are Forward Phase Triac dimmers, designed to control up to 120W of LED bulbs or 300W of incandescent bulbs. If you are dimming any larger wattages, or dimming any lights that have transformers or drivers, or have permanently built-in LEDs, we recommend you email us specifications on the lights so we can make sure they are compatible. LED have on-board programming features to enable you to adjust the minimum and maximum dimming levels and adjust the dimming characteristics. This is often required when dimming LEDs. Once you install your dimmer, we recommend you follow the “optimizing your dimmer” instructions and then apply the “child lock” to retain the settings. It is important to note that the dimmers will not work with all LED light fixtures and bulbs. If you have any questions regarding the compatibility of our dimmers with the light fixtures you are using, please contact us. Incandescent dimmers can control up to 500W of incandescent or halogen bulbs. Rotary Dimmers install into standard junction boxes but the boxes must be recessed below the finished wall surface by at least 1/8". Please refer to the Wallbox Assemble Diagram in the Installation Guide below. If you are installing into existing junction boxes, you will probably find the boxes are already recessed by at least this much but please check to make sure before placing an order. Areas of application: Light-duty Commercial, Residential Material(s) Unlacquered Brass Aged Brass Nickel Silver Brushed Stainless Steel Antique Bronze Note: materials will slowly age or oxidize over time. Wipe clean with a dry, non-abrasive microfiber cloth. Avoid use of chemical or alcohol based cleaners. Refer to the care guide below for best practices. Product Downloads Rotary Dimmer Product SheetRotary Dimmer Installation GuideForbes and Lomax BrochureForbes and Lomax Care Guide
Dimmer Wheel Knob - Antique Copper Finish (other finishes available) We were looking at some old vintage electrical panels and instruments and decided to design a knob that accentuates the vintage feel of those switches of yesteryear. The knobs today are cheap, plastic, and boring. So we took a boring "knob" and replaced it with something pretty cool. We think you'll like this Dimmer Switch. Add some zing and nostalgic flair to your next project by using our Dimmer Switches. You don’t want your projects to look like everyone else’s do you? This listing includes a dimmer switch and a wheel knob. * 300W Rotary Base Dimmer * Great Quality Cast metal (not cheap plastic) * Size: 1-7/8"L X 1-1/8" W X 5/8" H. * Wheel Knob measures 1-1/2" Diameter, 5/16" Thick and "No. 57" is stamped on center hub in raised lettering * Available in three magnificent finishes: Antique Copper, Antique Nickel, Antique Brass (or you can put your own finish on it.) * These are not intended for permanent use in a home or on a wall. Do not meet code for in-home installation. The wheel knobs may include blemishes in the finish, scratches, dings, etc., all at no additional charge. **The pictures in this listing may contain other various parts/pieces. They are NOT included. They are for photographic purposes only to give you an idea of some things you can do with this wheel knob. It's like when someone is trying to sell a dress and you see a picture with a model wearing the dress. You don't get the woman with the dress, she's just for show.......same with the other stuff in our photos. This listing is for the Dimmer Switch and Wheel Knob only.
Item specificsCondition
Prep now for common household disasters you may (unfortunately) encounter
Make turning on the lights fun! This double-gang design controls two separate lights. It features a sillcock (garden hose knob) that you simply turn in order to dim or brighten your lights. It also features a gear shape with a lever that turns a toggle switch off and on (toggles are the kind you flick up and down with your finger). This light switch comes fully assembled with the electrical dimmer components already attached. It fits over any standard size double-gang electrical box. PLEASE NOTE THAT, UNLIKE MY OTHER LIGHT SWITCH COVERS, THESE DIMMERS REQUIRE SOME ELECTRICAL WIRING IN ORDER TO INSTALL THEM. Your order includes instructions for installation, although I recommend that installations be completed by a qualified electrician. The dimmer switches are rated for 150W LED, 150 CFL, 600W Incandescent and 120 AC, 60Hz. They are single pole Rotary Dimmers. If you also require a toggle switch, please let me know and I can include one at no extra cost. My lever system has a bolt and nut design that allows you to adjust the amount of torque required to pull the levers up and down. A small matching steel wrench is included with your purchase to help you adjust the tension in the bolts. It also comes with a steel spacer plate, which ensures a tight seal against the wall and prevents wobbling and unsightly gaps between the switch and the wall. When installing, a good option is to invert your existing toggle switch (turn it upside down) so that the on/off, up/down action of the levers is not reversed. Base plate measures 4 ¾ inches tall by 4 ¼ inches wide. Levers extend 4 ¾ inches from the wall. Built to last and made in the USA from CNC plasma-cut 1/4 inch steel plates.Please allow 3-5 business days before items ship. Custom orders or very large orders may take longer. I accept returns of this item. However, a 20% restocking fee will apply.
A collection of designer light switches, dimmers, power outlets, electricity plates. Made from solid metal and availble in a variety of finishes.
The E2 Classic Black is an iconic modern dimmer switch without any bells and whistles, but lots of timeless design appeal. Its well-proportioned geometric lines are enhanced by this matt black finish. The rotary dimmer units, made by ION in the Netherlands, are "universal" LED dimmers, meaning that they can work in both dimming principles (Leading Edge and Trailing Edge). They are available in load ratings of 200W or 350W.