I was given this hall table/sofa table quite some time ago. It was plain, made up of mostly MDF, and it just wasn't speaking to me. After scrolling through one…

Buy Once, Use Forever! Design your living space with Prima ❤️ RETIRED DESIGN! This mold has been discontinued. Once current stock is sold out, this design will no longer be available Wilderness Rose Decor Mould 5x8 These molds open up a whole new universe filled with possibilities! They are easy to use-dust with corn starch and press paper clay into the mold, or simply fill with resin and allow to harden then pop them out. Perfect detailed appliques every time! Additional Details: High quality silicone moulds perfect for use with clay, resin and many other materials. Heat resistant and food safe. Material: 100% Food grade silicone, non-toxic. BPA, PVC, and Phthalate free Oven, microwave, refrigerator and freezer safe. Oven safe up to 500°F (260°C) Freezer safe up to -100°F (-74°C) Easy to clean, non-stick, no coating. Deer Run Revamps is a one stop shop! We are located at the beautiful Jersey Shore 🏖️ We offer the revolutionary new product that can turn any hard surface into gorgeous stained wood, called Retique It. This brand offers the liquid wood, stains (gel stains, waterbased and oil based), brushes, wood graining tools and the "perfect every time", polyacrylic . And of course we also offer Redesign with Prima transfers and silicone moulds. If interested, you can follow my journey and see all of the unique pieces I create using these products on Facebook and Instagram https://m.facebook.com/deerrunrevamps/?ref=bookmarks https://www.instagram.com/deer_run_revamps

There are some nearly-perfect treasures to be found at thrift stores, but there are lots more pieces that need a little extra love and attention to become something great. This cabinet, found by DIYer Hana Sethi (@hanashappyhome), is a prime example. When Hana found it, one of its knobs was broken, its hinges were rusted, and the orangey color of its laminate finish wasn’t doing it any favors.

Flower Mold, forest, grassland, tundra, plant life, gardens, lawns, plants, flowering plants, Flower, wildflowers, ferns, sedges, moss, silicone mold, flowering plants, Tropical Evergreen Forests, Calla Lilies, Carnations, Chrysanthemums, Daisies, Florist, Resin mold, Clay mold, Epoxy molds, Food grade molds, Ultraviolet molds, Chocolate molds, Palm trees, Item size 2" Tall x 2" Wide X 1/2" Thick Mold size 2-1/2" Diameter x 5/8" Thick I want every customer to be completely satisfied with their purchase. This means all of my molds except Custom molds are fully refundable. If you have issues with your molds please message me within 14 days of receiving your mold(s) and I will gladly refund your purchase price of the mold(s) after they have been received at Salvatore’s Studio. A little about my process: To create the highest quality mold with the most intricate detail, I take the extra time to pour the silicone to create your mold. I don’t press the item into silicone putty since this method would not pick up detail. To ensure your mold is of the highest quality I use a vacuum system to remove any air from the silicone. My 20 years of experience in silicone mold making assures that the mold you purchase will yield perfect castings. Using only the finest American made silicone for your molds will guarantee quality reproductions for many years. I guarantee you will receive professional quality molds.

3d Rose bud silicone mold ms for soap Epoxy Resin etc… Flower craft Silicone mold Dimensions of rose flower made with soap: Diameter - #1 - 1.5". #2 - 1.5" Height - 2.5" Weight of soap: #1 - 1.7 oz. (48 gr.). #2 - 1.3 oz. (36 g.) PLEASE READ BEFORE PLACING YOUR ORDER: We use Food grade silicone that is odorless and designed for all uses, including food purposes. Color: Pink/Neon pink color. The tint can range from light to bright neon pink. Useful Temperature Range -65F to 400F. (-53C to 205C). Hardness - A0 or C15 Shore. (very soft and durable silicone). The mold is designed to work with liquid materials that are not brittle when hardened. Also consider the viscosity of your material. Too viscous material may not flow into the far corners of the mold. All the molds have been tested with M&P soap and epoxy resin . When using other materials such as wax, chocolate, & Jelly, concrete, cement, etc., they can be very tricky. Consider your material & skills in the materials you are working with. If you are working with resin, use a spray release. If you are working with wax, consider the fragility of your wax. Delicate and thin flower petals can break when released from the mold. If you are working with materials not listed above, please consider your knowledge and experience with your material. All molds are custom made to order. Time for manufacturing takes 1-5 working days. Silicone undergoes vacuum treatment to remove air bubbles, as well as to increase service life of molds. All 3d forms have 1-3 cuts on the sides of Molds. It is necessary for extraction of the finished product without cracking or breaking. All 3d molds have a positive keyed alignment feature on the cuts (the cuts are made in the form of a semicircular groove). The new silicone sticks together and the slits become invisible. You just need to stretch the mold from the middle in different directions and the mold will open. Do not make cuts yourself, you can ruin your mold. If you have any questions, feel free to text me. We are always ready to help and respond with a few hours. PLEASE NOTE: the vertical cut is not allowed to be straight, since the cut with the knife is made by pressing on the silicone, and not by cutting, sawing when using a conventional straight knife. Cleaning Your Silicone Mold: Wash your silicone mold with warm/hot water and mild liquid dish soap. Pat dry thoroughly and then let the mold air-dry fully. Never use any type of abrasive soap, cleaner or pad to clean your silicone mold! Directions for soap making: 1. Spray (mist) inside surface of the silicone mold with alcohol (70-99 %) 2. Fasten the mold with elastic bands (if there are slits on the mold) 3. Pour soap base into the mold. 4. Shake the mold and gently tap on outside walls the mold to release air bubbles. 5. Place the mold with soap in the room with the cool temperature until the soap completely cooled off and hardened. 6. Gentle separated the edges of the mold from the soap and apply pressure on the bottom of the mold to release the soap from the mold. 7. Place your soap in a dry environment for 12-24 hours and when pack.

beautiful 3d rose flower mold of regular size soap Pink design diameter 7.5 cm and height 5 cm Approx And white design diameter 6 cm and height 5 cm Approx listing is for 1 rose mold its a heavy silicone designer mold for soap making , candle making . clay crafts, resin etc Please note I only sell silicone molds to make a design like in picture. So when you buy understand that it is a " silicone mold " and not a made product. .

3d Dahlia silicone Mold for soap making Size of dahlia flower made with soap: Width: approx 3.5" Height: approx 2" Weight of soap: 2.9 oz. (82 gr.) PLEASE READ BEFORE PLACING YOUR ORDER: We use Food grade silicone that is odorless and designed for all uses, including food purposes. Color: Pink/Neon pink color. The tint can range from light to bright neon pink. Useful Temperature Range -65F to 400F. (-53C to 205C). Hardness - A0 or C15 Shore. (very soft and durable silicone). The mold is designed to work with liquid materials that are not brittle when hardened. Also consider the viscosity of your material. Too viscous material may not flow into the far corners of the mold. All the molds have been tested with M&P soap and epoxy resin . When using other materials such as wax, chocolate, & Jelly, concrete, cement, etc., they can be very tricky. Consider your material & skills in the materials you are working with. If you are working with resin, use a spray release. If you are working with wax, consider the fragility of your wax. Delicate and thin flower petals can break when released from the mold. If you are working with materials not listed above, please consider your knowledge and experience with your material. All molds are custom made to order. Time for manufacturing takes 1-5 working days. Silicone undergoes vacuum treatment to remove air bubbles, as well as to increase service life of molds. All 3d forms have 1-3 cuts on the sides of Molds. It is necessary for extraction of the finished product without cracking or breaking. All 3d molds have a positive keyed alignment feature on the cuts (the cuts are made in the form of a semicircular groove). The new silicone sticks together and the slits become invisible. You just need to stretch the mold from the middle in different directions and the mold will open. Do not make cuts yourself, you can ruin your mold. If you have any questions, feel free to text me. We are always ready to help and respond with a few hours. PLEASE NOTE: the vertical cut is not allowed to be straight, since the cut with the knife is made by pressing on the silicone, and not by cutting, sawing when using a conventional straight knife. Cleaning Your Silicone Mold: Wash your silicone mold with warm/hot water and mild liquid dish soap. Pat dry thoroughly and then let the mold air-dry fully. Never use any type of abrasive soap, cleaner or pad to clean your silicone mold! Directions for soap making: 1. Spray (mist) inside surface of the silicone mold with alcohol (70-99 %) 2. Fasten the mold with elastic bands (if there are slits on the mold) 3. Pour soap base into the mold. 4. Shake the mold and gently tap on outside walls the mold to release air bubbles. 5. Place the mold with soap in the room with the cool temperature until the soap completely cooled off and hardened. 6. Gentle separated the edges of the mold from the soap and apply pressure on the bottom of the mold to release the soap from the mold. 7. Place your soap in a dry environment for 12-24 hours and when pack.

I came across this plain, dark floor mirror and decided I just had to give it a makeover!I used Renaissance Chalk Paint in the colors Ivory Tower and Misty Rive…

Learn easy way how to dry flowers for your next resin project. Simple steps plus the pro tips to having beautiful flowers for epoxy.

One of the largest sola wood flowers we offer. At 6" wide, this flower is magical! Features: 6 inches wide  Soft, pliable, and easy to dye. Unique designs in every bouquet. Sold in groups of 3  Please note these wood flowers are handmade and there can be a slight difference in size and shape from flower to flower. Sola

If you love ornate furniture pieces like I do, and finding them is difficult or near impossible in your area, the next best thing is to create your own raised details for a piece with your own custom design. It immediately adds beauty onto an otherwise plain piece. There are many kinds of moulds available…

I love how dainty these DIY Plaster Dipped Dollar Store Flowers came out! So easy and so inexpensive! Give them a try!

Material: Soft Silicone Flower diameter: 15cm Height: 5cm Reference: K382 1G950 Beautiful High Precision RTV-2 silicone mould. Mold your own objects in as many copies as you wish using Polymer Clay, Fimo, Plaster, WEPAM, cement, Soap, Wax, resin, polyester, cement...

Extra Large Rose Silicone mold 4.5 oz for Soap Wax Candles Resin Dimensions of rose flower made with soap: Diameter - 3.8" Height: approx 2.5" Weight of soap: 4.5 oz (130 gr.) PLEASE READ BEFORE PLACING YOUR ORDER: We use Food grade silicone that is odorless and designed for all uses, including food purposes. Color: Pink/Neon pink color. The tint can range from light to bright neon pink. Useful Temperature Range -65F to 400F. (-53C to 205C). Hardness - A0 or C15 Shore. (very soft and durable silicone). The mold is designed to work with liquid materials that are not brittle when hardened. Also consider the viscosity of your material. Too viscous material may not flow into the far corners of the mold. All the molds have been tested with M&P soap and epoxy resin . When using other materials such as wax, chocolate, & Jelly, concrete, cement, etc., they can be very tricky. Consider your material & skills in the materials you are working with. If you are working with resin, use a spray release. If you are working with wax, consider the fragility of your wax. Delicate and thin flower petals can break when released from the mold. If you are working with materials not listed above, please consider your knowledge and experience with your material. All molds are custom made to order. Time for manufacturing takes 1-5 working days. Silicone undergoes vacuum treatment to remove air bubbles, as well as to increase service life of molds. All 3d forms have 1-3 cuts on the sides of Molds. It is necessary for extraction of the finished product without cracking or breaking. All 3d molds have a positive keyed alignment feature on the cuts (the cuts are made in the form of a semicircular groove). The new silicone sticks together and the slits become invisible. You just need to stretch the mold from the middle in different directions and the mold will open. Do not make cuts yourself, you can ruin your mold. If you have any questions, feel free to text me. We are always ready to help and respond with a few hours. PLEASE NOTE: the vertical cut is not allowed to be straight, since the cut with the knife is made by pressing on the silicone, and not by cutting, sawing when using a conventional straight knife. Cleaning Your Silicone Mold: Wash your silicone mold with warm/hot water and mild liquid dish soap. Pat dry thoroughly and then let the mold air-dry fully. Never use any type of abrasive soap, cleaner or pad to clean your silicone mold! Directions for soap making: 1. Spray (mist) inside surface of the silicone mold with alcohol (70-99 %) 2. Fasten the mold with elastic bands (if there are slits on the mold) 3. Pour soap base into the mold. 4. Shake the mold and gently tap on outside walls the mold to release air bubbles. 5. Place the mold with soap in the room with the cool temperature until the soap completely cooled off and hardened. 6. Gentle separated the edges of the mold from the soap and apply pressure on the bottom of the mold to release the soap from the mold. 7. Place your soap in a dry environment for 12-24 hours and when pack.

Large Rose Silicone Mold for furniture onlays , pediments, scrapbooking , wall deco, doors, hardware, cabinets, dressers. Flower Size : 29 x 9 x 2 cm // 11.4 x 3.5 x 0.8 inch -= Perfect use for poli crafts, resin crafts, gypsum and clays, cement, concrete * Ideal furniture upcycle, door decoration, walls, cabinets, furniture pediments .... any art projects *This flexible molds no need releasing agent Very good flowability Hardness (A°) 30 Can be used at temperatures from -50 to +200 degrees Celsius Keep in Dark place. Wash with soap and Water. For many other new molds please check out our shop Handmade from Riga,Latvia

3D Rose flower Mold Chocolate Cake Decoration Silicone Mold for Wedding Cake Decorating tools Candle Mold, Resin Mold ,soap mold size:7.8*7.8*4.5cm weight:102g Material: food grade silicone Size: see picture

Exquisite Flower Mold - Add Elegance to Your Creations Elevate your baking with our Flower Mold. Crafted for perfection, this silicone mold brings artistry to your desserts. Product Details Cake Tools Type: Moulds Type: Cake Tools Material: Silicone Certifications: CE / EU, CIQ Unleash your creativity and design stunning floral-themed cakes. Get your Flower Mold today!