The penny floor template is your key to success when creating your penny floor or penny project. With the penny floor template you can use your floors while setting your pennies onto mosaic sheets and avoid the back-breaking work of being hunched over pushing pennies into the floor.
Some of the best DIY flooring projects found on Pinterest!
Who knew you could get such a rich-looking floor β¦ for pennies?!
If youβve been following this blog for a while, you might remember that when I lived in my condo I tiled my bathroom floor with pennies. Well, I loved that floor so much that I decided to tilβ¦
In the post "Today Is My Birthday", I gave you a sneak peek of a project I believe has changed me more than any other project we have completed, during the house build. Here is the Heads Up on how it all went down! From the day we set down with my Uncie, to draw up the new house plan, I have had a vision of a Heads Up Penny Floor in Flower Boy's Shower! I wanted to use the slate tile we already had on hand. I wanted three, yes 3, shower heads in that shower. I wanted a clear glass shower door. I wanted that shower to be 4 feet wide and 5 feet long. I wanted the pennies to be ALL heads up. I wanted to grout the pennies with black grout. I wanted to seal the pennies with a water proof sealer to protect them. Of course, with all the visions I have had going into this house build, I had no idea how to do the project. Flower Boy stood with me on my vision. He and I have researched, called, talked to professionals and reviewed different scenarios in our heads. There were so many nay sayers, with only a few understanding my vision. Pinterest became our best resource. I found a photo, there, of a shower with the slate tile and the penny floor. We spent countless hours attempting to track down the original shower. We never found THAT shower, but did find a person who did a mosaic shower with a penny floor. We followed those instructions. The glue we used is WeldBond. And boy does it work! The bottle says it "Bonds Most Anything!" AGREED! I smeared some on a pair of pants and it is still there after several washings. All it takes is one single drop! Flower Boy set the pattern with the pennies. Then it was smooth sailing! For me, this is where everything CHANGED. I realized with each penny I was picking up, I was focusing on their placement. Each penny would slide into place without hesitation or problems seating. I would pick up each penny, making sure to place the drop of glue on the tails side, then push it onto the floor. As I worked, I was focusing more on the "In God We Trust" than I was on the actual Heads Up of the penny. There is a reason I wanted the pennies all Heads Up. I thought it was due to the fact that Flower Boy WILL NOT pick up a penny unless it is Heads Up. Now, I KNOW it is because of the words written on the Heads Up side. "In God We Trust" says it ALL! Through our entire journey, from the day of the house fire, We have placed our faith and trust in God to guide, protect and direct us, to where we are today and into our future. The placement of all 5382 pennies was my confirmation. Not one single penny was cut to be placed on the shower floor. After all the pennies were put in place, we allowed it to set for a few days to insure the glue dried and the pennies were set. We then applied black sanded grout to the floor. Then we wiped it clean. You will notice around the drain there are four pennies above and four pennies below. These stand alone for a reason. The top four are the birth years of My Daddy, Our Big Kids and Drewman. My Daddy's birth year is 1941. This is the only wheat penny on the floor. The lower four are a 2012, Flower Boy's birth year, my birth year and a 2013. 2012 and 2013 signifying the loss of the old house and the birth of the new house. The floor will be sealed with a two part epoxy after all the construction is finished in the house. We want the house to be dust free when the epoxy is applied. No one wants dust particles or dirt affecting the look of this amazing floor. We will also add a small bit of grit to the top of the epoxy. It will prevent slipping but you won't be able to see the grit. During this project I was reminded of a poem titled "Pennies from Heaven" I found a penny today just laying on the ground But itβs not just a penny this little coin Iβve found βFoundβ pennies come from heaven thatβs what my Grandpa told me He said angels toss them down oh, how I loved that story He said when an angel misses you they toss a penny down Sometimes just to cheer you up make a smile out of your frown So donβt pass by that penny when youβre feeling blue It may be a penny from heaven that an angel tossed to you The poem has added to what CHANGED me. No other words are needed here. My Daddy is My Angel HEADS UP!!
Are you looking for something new in your bathroom or kitchen? Do you consider installing new flooring? If you have lots of spare pennies, then perhaps you
Jordan Darian stuck all of the coins to her bathroom floor, giving the room a complete makeover
Ready to see my mystery office desktop? The one John and I have been working so hard on for the past few weeks? And learn how we did it? I mean, I know *I'm* excited. Here, I'll ease you in slowly. It all started....[dramatic pause]...WITH THESE: DUN DUN DUUUUUNNNN!! And it became...[more dramatic pausing]...THIS: Ta-DA! Ok, that's not the best shot. Here, try this one: Oooh. Aaaah. Now, on to the photo-intensive tutorial/progress shots! If you want to try this yourself, or just see how insane *we* are, keep scrolling. First, if you want your top to have any shine to it, you're going to need to polish up some of the pennies you're using. Here's a quick way to do that: Fill your bowl about a quarter of the way with pennies, pour in a little Tarn-X, and then swish and shake the bowl around over the sink (in case of splashes) to evenly expose the coins to the liquid. This only takes a matter of seconds. When they seem evenly shined up, dump the lot into a colander in the sink and rinse well. From there, dump the batch onto an old towel to dry them: I polished roughly half of the pennies I planned to use, so there would still be plenty of color variation. Still, it would also look amazing to have the entire surface polished, so the choice is up to you. Next you're going to need a surface to adhere the pennies to. John built this desktop out of plywood, and then painted it flat black: This fits in a cubby between two bookshelves, so only the front edge is rounded prettily. (Routers: very useful.) Oh, and those pennies aren't glued down; we were just testing out the pattern. To begin, start with the oh-so-important front edge: John clamped a long metal ruler down to use as a straight edge, which I used as a guide to glue on the rounded pennies. And how do you round those pennies, you ask? Well, we used these: That's an old titanium ring of John's with a bit of electrical tape wrapped inside. After a bit of trial and error, John found that clamping a penny inside the ring with pliers made just the right curve to fit the desk edge: However, be warned, ye of lesser hand strength: this is HARD. I tried with all my might and couldn't get the penny to budge, much less bend. Even John wore a heavy work glove to protect his palm while working. NOTE: If you don't want to (or can't) bend pennies for the edge, you still fill the flat top of your surface with pennies. So don't get hung up on the bending thing: it adds a nice touch, but is not really necessary. Once the first line of bent pennies are glued down (ah, Gorilla glue, my old friend...) it's a simple, if time-consuming, matter to fill the rest of the desktop: This wouldn't have taken me quite so long if I weren't arranging the pennies in a non-random random arrangement. That is to say, it *looks* random, but only by design. I mixed the various colors and designs just so, to get it all consistent. I kept a small bowl of "special" pennies on hand to mix in at regular intervals. These included wheat pennies, prettily corroded pennies, and the various new back designs from 2009 and '10. I even have a few Canadian pennies in there, plus one from the Bahamas (which has the prettiest penny design, really) almost smack in the middle. To keep the coins from shifting, you really do need to glue each and every one down. However, it doesn't take much glue to do it: I was about to apologize for the blur when I realized John took this shot. (John! Get in here and apologize!) Almost done! The pennies hanging off the edge were for John to trim off with a Dremel later. At this point John took over with the Dremel and heavy-duty snips. He trimmed the edges and cut penny slivers to fill in the small spaces. As you can see, for the corners he had to cut the pennies on the seam *and* bend them to fit the curve. Not easy. This all took him about two nights. (By the time the desktop was completely covered with pennies, we'd been working on it for about 6 nights.) Next comes the scariest part of all: covering your top in bartop epoxy. We set our desk on sawhorses in a small room with the floor covered in heavy plastic sheeting. Because the epoxy takes a few days to cure, you need an area with minimal dust, bugs, and pet hair blowing around (close your room's air vent, if you can). The plastic covering the floor is also *extremely* important. You'll see why in a sec. Here goes nothin'... You may notice our epoxy is tinted a golden orange. This is not intentional: it's just old. Heh. However, since the stuff is so expensive (well over $100), we decided to use it anyway. Waste not, save money, right? Besides, the tint just makes the pennies slightly more golden, which actually looks rather nice: Once all the epoxy is poured on, it's time to start tipping the desk slightly to get the epoxy to spread out to all the edges. See why that plastic is important? You really, REALLY don't want this stuff on your carpet. "Somebody blows their nose and you want a sample?" Ahem. Once all the edges are coated, you can use a small spoon or spatula to scoop some of the epoxy off the plastic on the floor and back onto the top: The epoxy self-levels, but we had to go over that curved edge several times to make sure it filled in all the gaps. (Even so, our front edge is not perfectly smooth; it has ripples over all the coins. I think it feels kinda cool, though.) But wait, we're not done yet! Next, get out your BLOW TORCH: And you thought I was kidding. The torch is to get rid of bubbles in your epoxy. And believe me, there are going to be lots and lots of bubbles. Keeping the flame about 6 inches away from the surface, pass it over the surface and watch those bubbles magically lift up and away, leaving behind a nice, glass-smooth skin. And NOW...we wait. For about two days. (I think it's dry to the touch after one, though.) And then... Voila! An ΓΌber cool penny desk! Here's a close-up: It looks amaaazing, if I do say so myself. I'm letting it cure an extra few days before putting anything heavy on it, though - like a vintage typewriter, perhaps? We'll see. Also, once the desk was installed I realized I need something equally amazing to go on the wall *over* it. (Currently that's the only blank wall left in my entire office.) Which means: yup, another project! John and I are already eight hours into it, and I'm typing this completely covered in sawdust. So. Fun. But, that's for another day. In the meantime, I hope to pick up more with posts; I know they've been a bit sparse lately. John helped me catch up on e-mail, so now I have tons of goodies to share. You guys send in the best stuff - keep it up! In fact, I think I'll feature some of your crafty triumphs next, so stay tuned for that! ***** Want more DIY goodies? Come see ALL of my craft projects on one page, right here!
This brilliant solution is quickly going viral.
Small laundry room ideas with a sink can be hard to come by since utility-based spaces are difficult to decorate. The most important thing to remember is that
Can you say that title 5 times fast?? A few weeks ago we finished our pantry floor and today I want to give you a peek and it and share the inspiration behind it. So weβve been working on aβ¦
When starting a renovation at home, itβs important to make every last cent count. This DIY renovation literally puts no penny to waste, and the results are stunning! Tonya Tooners took advantage of every lucky penny she found. After acquiring 13,000 of them, Tooners, a DIY enthusiast, decided to put them to use in a...
If you want to make your home look more luxe, start with these easy tips. They're guaranteed to instantly elevate your home to luxury level!
Cordwood floors are natural flooring that uses actual reclaimed wood, which is eco-friendly and cheap. Build this unique flooring with our guide!
Are you looking for something new in your bathroom or kitchen? Do you consider installing new flooring? If you have lots of spare pennies, then perhaps you