Chair caning instructions on how-to cane chairs by hand, strand caning or lace cane to make your DIY chair caning project a success!
Learning how to fix a cane chair seat or back is easier than you’d think!
Chair caning instructions on how-to cane chairs by hand, strand caning or lace cane to make your DIY chair caning project a success!
Hello beautiful friends! Have you ever passed on a chair because it had a damaged seat? Well, today I am getting together with my Furniture Fixer Upper girls to share furniture flips, and I have one such chair to share! I picked this up at the thrift store last week at the bargain discount price
I was browsing craigslist one afternoon when I saw a listing for a pair of vintage cane chairs on sale at the local (okay, not local, I ...
Easy chair seat idea with 2 inch cotton or nylon webbing cut into strips and then woven across the seat and secured with a staple gun.
Caning a chair is a fun and easy project. Just get a cane-ready chair and measure the holes to determine what sort of gauge you need. Thread the cane through the chair from the center to the right side, then from the center to the left....
Thank you, Gail, for having me on My Repurposed Life! I found this chair at a local antique store for $8. I was so cheap and cute, I figured I could easily fix it up. My original plan was to redo the caning in the seat since I’ve done that before and had all the...Read More
Chair caning instructions on how-to cane chairs by hand, strand caning or lace cane to make your DIY chair caning project a success!
Edited: Last April I did a tutorial for Miss Mustard Seed to show how to replace caning. At the time I wrote the post, I was a little unfamiliar with Blogger and I scheduled the post to run on my blog a year later and…
A month or so ago we were perusing a local thrift store when I noticed this chair. The left armrest was pretty wobbly, but other than that it was in great shape. The seat was dirty but in good condition and there were no cracks in the wood. I could see that it was a Louis XV reproduction, probably made in the early 80's, and once I found the price tag I knew I had to grab it right away! After about 20 mins of finagling, we fit it in my car and took it home. First, I removed the seat by unscrewing the 4 screws attaching it to the frame. The next hurdle was to de-wobble the armrest. For that I simply flipped the chair over, pre-drilled and countersunk a hole, and screwed in a heavy-duty 3 inch screw.That took care of 90% of the wobble. So, I also added a couple 2 inch finish nails to the back of the frame where the armrest meets. No more wobble! I wanted some paint resistance, so I chose not to prime the frame. I lazily roughed up the surface with some 150 grit sandpaper, just to make sure the whole thing didn't peel off. I then brushed on 2 coats of white, latex, semi-gloss paint. The paint I used is supposed to be a "one coat paint" because of it being a "paint and primer in one", but clearly I needed more than one coat. Two coats covered nicely. I then applied the glaze. I used Martha Stewart faux effects glaze (not my favorite, but not terrible) mixed with about 10% raw Umber and 10% Burnt Umber. I didn't do a heavy concentrated glaze because I wanted the frame to still look white. I just wanted to bring out some of the detail in the piece. That's part of the reason why I used semi-gloss. I wanted the glaze to only minorly darken the paint color. Had I gone with a satin finish, the paint would have absorbed too much color. The semi-gloss finish allowed the glaze to slip right off it. Using some 100 grit sandpaper I went around and distressed the raised areas, causing some chippyness. I then sealed it with two coats of my favorite, Polyacrylic in satin. Although it's super smooth and even, it did turn out a bit more shiny than I like due to the semi-gloss paint underneath. Oh well. Time to upholster! The seat went quickly. I'm sure most of you have re-covered a seat before, or at least watched someone do it, so I wont go into an explanation on that unless someone asks. Time to address the caning! I really debated on what I should do with the caned back. Most people these days see caning and think of their grandma's house and cats. Well, due to the large amount of caned furniture in the mid 20th century, I can see that. It really is beautiful and functional though. It can stretch over curves, and it gives great texture. In fact, just the other night I was flipping through the most recent Restoration Hardware Children's catalog where I spotted 2 different caned cribs! Maybe it's making a comeback? A lot of the caned chairs you come across second-hand are in bad shape, but this one was intact, making my decision even harder. I ultimately decided to upholster over it for two reasons. I wanted to try something new, and I figured it would be a usefully tutorial to most of you. I first grabbed some old newspaper and made a template. I kept the caning intact because it would be easier than removing it and having to create some kind of sub-structure. Had the caning been removed, it would have made tracing my template much easier. I then transfered the shape to some 1 inch thick foam (sorry, no photos for this step, my battery was charging and I was impatient). I had to reshape the foam a small amount, but it fit pretty well. I then secured the foam with some spray adhesive. I repeated the same process to fill the recessed space in the back of the chair. Next, I cut a piece of batting and a piece of fabric larger than the area I was going to cover, layering the batting first, and the fabric on top. I then went around the opening, stapling to the frame, making sure to pull the batting and fabric taught. With some help from the husband pulling, I secured both layers all around. I then trimmed off the excess, cutting close to the staples, but making sure to stay within the recessed grove. This step probably would be easier with a sharp utility knife, instead of bulky scissors. I repeated the steps to the other side and now the chair had an upholstered back. You have some options to cover the staples. I wanted this chair really look like a french Louis XV chair, so I went with braided trim. For a more contemporary or simple look, I would use double-welting (if you don't know what that is or can't find it, look it up online. There are a few good tutorials on how to make your own). This chair took about 5 1/2 yards of trim. Simply lay down a thin bead of hot glue over your staple line and smooth the trim over the border. Make sure to seal the ends of the trim with a bit of the glue so they don't fray. And that's it! I now have a beautifully upholstered arm chair. I love the fabric! It has some texture but still feels soft, and the color is a perfect, neutral beige. Let's be friends! Follow along so you don't miss a thing!
You don't have to give up on your old, broken chairs just yet!
I've had a few folks ask me if I can re-cane chairs and with some materials in hand, I thought I might give it a try. Alas, I soon found that I lacked the necessary tools to successfully rip out the old cane and add in the new. Instead, I decided to do what I know (upholstery, of
If you're looking for white painted furniture inspiration, I've got you covered! Today, I'm sharing 21 white painted furniture Ideas!
Follow along as we show you how to repurpose this thrift store ceiling light fixture into a Steampunk styled table lamp!
This French Cane Chair redo was so easy just be removing the old broken caning and replacing with a plywood seat and new upholstery!
A French style armchair, non-distressed, in Sweet-Pea Green. This color is similar to my Victorian Moss color, but the amber hue of the moss color is toned down, giving it a more silvery-pale appearance. Customer requested no distressing. Original caned back was painted over.
