• RESISTANT - Polyethylene jug resistant to oil, fuel and most acids. • COMPACT - Removable flexible spout allows for easy storage when not in use. • WATERTIGHT - Screw cap and lid enable jug to be watertight and used as a container; ensuring safer handling of liquids and prevents spillages. • MEASURING SCALE - Scale for indication purposes only, not intended for 100% accuracy. • CAPACITY - 3L.

UNC 1/2" (13 T.P.I.), Coarse Pitch, A2/ 304 Stainless Steel, Allen/ Hexagon Socket, Cap Head, Allen Bolt, DIN 912, ISO 4762, BS 2470 Fixaball sells all lengths of 1/2" UNC, socket cap screws/ bolts. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.   UNC, 1/2" A2/ 304 Stainless Steel, Allen Socket, Cap Head Screw/ Bolt lengths available: (FT - Fully Threaded, PT - Partially Threaded) Size Description Item Description 1/2"-13x7/8",(FT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 1/2"-13x1",(FT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 1/2"-13x1 1/4",(FT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 1/2"-13x1 1/2",(FT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 1/2"-13x2",(FT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 1/2"-13x2 1/4",(PT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 1/2"-13x3",(PT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 1/2"-13x4",(PT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2 *1/2"-13x4 1/2",(PT) SOCKET HEAD CAP SCREWS UNC 1936-60 S/STEEL A2   *Request size   Material: A2/ 304 Stainless Steel Material/ Finish Appearance Level of Corrosion Resistance Typical Application Self Colour A2/ 304 Stainless Steel Dull Shine, Grey High -          External Weathering not prone to chemical exposure e.g. salt water UNIFIED THREAD STANDARDS  The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads. Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms.   Image is for illustrative purposes only.

M16, 16mm Diameter (2.0mm Pitch) Standard Coarse Thread, Allen/ Hexagonal Socket, Cap Head, Screw/ Bolt, A2/ 304 Stainless Steel, DIN 912 Fixaball sells all lengths of M16 x 2.0mm Pitch (Standard Coarse Thread), A2/ 304 Stainless Steel, Allen Socket Cap Screw/ Bolts. Descrcription: M16 socket cap screw/ bolts.Material: A2/ 304 Stainless Steel.Coating/ Finish: None.Thread: Threads are metric coarse M16 x 2.0mm pitch.Head diameter: 24mm.Head height: 16mm.Allen key size: 14mm.Standard: DIN 912.Note: Bolt lengths do not include the head. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.   M16, Socket Screw, Cap Head, A2/ 304 Stainless Steel, DIN 912 descriptions: M16 X 30 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 35 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 40 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 45 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 50 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 55 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 60 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 65 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 70 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 75 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 80 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 85 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 90 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 95 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 100 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 110 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M16 X 120 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL   Red = request lengths FIXABALL – Specialist Fixings and Fasteners Suppliers Hexagon/ Allen Key Sizes METRIC – Allen Socket, Cap Head, Screw Bolts Allen Socket, Cap Head Screw Size Diameter Allen/ Hex/ Hexagon Key Required to tighten and loosen M3 2.5 M4 3 M5 4 M6 5 M8 6 M10 8 M12 10 M14 12 M16 14 M18 14 M20 17 M22 17 M24 19   Available Materials:  A2/ 304 Stainless Steel. Material/ Finish Appearance Level of Corrosion Resistance Typical Application A2/ 304 Stainless Steel Dull Shine External Intermittent weathering   Metric Threads. Metric Coarse and Metric Fine threads are in millimetre (mm) units and referes to the distance between the helical coils. The Metric measurement system was developed to simplify the imperial systems. Europe moved to this system but the Americans choose Imperial as their default. A coarse thread has less helical coils per mm and a fine one has more. Standard (most commonly used) Coarse Threads are used for heavier loads e.g. Fabricating the Eiffel Tower and Fine Threads are used for lighter loads prone to vibrations e.g. motor and machine applications. Coarse threads are the, 'normal', most common versions.  Image is for illustrative purposes only.

Buy Harmonic Arts Cordyceps Mushroom Extract - Tincture online at YesWellness.com. Free shipping available on all orders within Canada over $89 before tax.

M14, 14mm Diameter (2.0mm Pitch) Standard Coarse Thread, Allen Socket, Cap Head, Screw/ Bolt, A2/ 304 Stainless Steel, DIN 912, Fixaball sells all lengths of M14 x 2.0mm Pitch (Standard Coarse Thread), A2/ 304 Stainless Steel, Allen Socket Cap Screw/ Bolts . Descrcription: M14 socket cap screw/ bolts.Material: A2/ 304 Stainless Steel.Coating/ Finish: None.Thread: Threads are metric coarse M14 x 2.0mm pitch.Head diameter: 21mm.Head height: 14mm.Allen key size: 12mm.Standard: DIN 912.Note: Bolt lengths do not include the head. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.   M14, Socket Screw, Cap Head, A2/ 304 Stainless Steel, DIN 912 descriptions: M14 X 30 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 35 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 40 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 45 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 50 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 55 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 60 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 65 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 70 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 75 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 80 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 85 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 90 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 95 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M14 X 100 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL   Red = request lengths FIXABALL – Specialist Fixings and Fasteners Suppliers Hexagon/ Allen Key Sizes METRIC – Allen Socket, Cap Head, Screw Bolts Allen Socket, Cap Head Screw Size Diameter Allen/ Hex/ Hexagon Key Required to tighten and loosen M3 2.5 M4 3 M5 4 M6 5 M8 6 M10 8 M12 10 M14 12 M16 14 M18 14 M20 17 M22 17 M24 19   Material: A2/ 304 Stainless Steel. Material/ Finish Appearance Level of Corrosion Resistance Typical Application A2/ 304 Stainless Steel Dull Shine External Intermittent weathering   Metric Coarse and Metric Fine threads are in millimetre (mm) units and were developed to simplify the imperial systems. Europe moved to this system but the Americans choose Imperial as their default. A coarse thread has less helical coils per mm and a fine one has more. Coarse is used for heavier loads and fine is used for lighter loads prone to vibrations. Coarse threads are the, 'normal', most common versions.  Image is for illustrative purposes only.

Buy Harmonic Arts St. John's Wort Tincture online at YesWellness.com. Free shipping available on all orders within Canada over $89 before tax.

UNC 1.1/4" x 2.1/2", Cap Head, Socket Screw/ Allen Bolt, High Tensile (12.9), BS 2470 Fixaball sells all lengths of 1.1/4", UNC, socket cap screws. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.   Fixaball – Specialist Fixings and Fasteners UNC/ UNF Socket Cap Screws Conforming to ASME/ ANSI B18.3 1960 Series All measurements in Inches   Pitch TPI Head Diameter Shank Diameter Head Height Hex Key Size Diameter UNC UNF Max Max Max Nom 1.1/4 7 12 1.75 1.25 1.25 ¾   Listing is for High Tensile – 12.9 Grade. Available Materials: Black/ Self Colour  Material/ Finish Appearance Level of Corrosion Resistance Typical Application High Tensile Steel Self-Colour (black with no surface treatment) Low, without further surface treatment -          No exposure to moisture -          Often Greased/ Oilied   UNIFIED THREAD STANDARDS  The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardisation of thread form, diameter-pitch combinations, and limits of size. Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads. Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms. Image is for illustrative purposes only.

UNF 5/16", Cap Head, Socket Screw/ Allen Bolt, High Tensile (12.9) BS 2470, ZINC Fixaball sells all lengths of zinc, 5/16" UNF hexagon/ allen cap screws.   What is a socket cap screw/ bolt? The ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.   5/16", UNF hexagon/ allen cap screw lengths available FT - Fully Threaded PT - Partially Threaded Description 5/16"-24x3/4",(FT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3 5/16"-24x1",(FT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3 5/16"-24x1 1/4",(FT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3 5/16"-24x1 1/2",(FT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3 5/16"-24x1 3/4",(PT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3 5/16"-24x2",(PT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3 5/16"-24x2 1/4",(PT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3 5/16"-24x2 1/2",(PT) SOCKET HEAD CAP SCREW UNF 1960 ZINC-BAKE CR+3   Fixaball – Specialist Fixings and Fasteners UNC/ UNF Socket Cap Screws Conforming to ASME/ ANSI B18.3 1960 Series All measurements in Inches   Pitch TPI Head Diameter Shank Diameter Head Height Hex Key Size Diameter UNC UNF Max Max Max Nom 5/16 18 24 0.44 0.31 0.31 7/32   High Tensile – 12.9 Grade. Available Materials: BZP Zinc Plated. Material/ Finish Appearance Level of Corrosion Resistance Typical Application High Tensile Steel - Zinc Bright Shine – Blue to Yellow Internal Low exposure to moisture UNIFIED THREAD STANDARDS  The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardization of thread form, diameter-pitch combinations, and limits of size Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads. Unified National Fine (UNF) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a smaller thread pitch than an equivalent diameter UNC thread.   Image is for illustrative purposes only

PRICES MAY VARY. ✈️ On The Go – Large enough to store your supplements, small enough to bring with you. Toss it in your gym bag or clip to your backpack and bring it with you wherever you're working out: in the gym, on the trails, on the field. 🎉 Functional & Fun – The patented dual screw cap and funnel design allows an easy and mess free pour into any water bottle or shaker to mix your supplements, protein powder, or pre-workout of choice. ⏱️ Fastest funnel on the market – We've redesigned and perfected the funnel design of the Double Scoop for optimal speed and fluidity. The new funnel design is engineered for optimal flow: nearly 2.5x faster than our original keychain and faster than any other supplement funnel we've tested. 💪 Large Size – At over twice the size of our flagship OnMyWhey single scoop and at a massive 180cc capacity, this OnMyWhey Double Scoop has plenty of room to fit 2 full scoops of your favorite supplement. 📐 Easy Measuring – The hash marks on the inside of the bottle let you easily fill your supplement keychain with the perfect dose. OnMyWhey's NEW Double Scoop bottle is over twice the size of the Classic single scoop! At a massive 180cc capacity, the Double Scoop has plenty of room to fit 2 full scoops of your favorite supplement. We’ve redesigned and perfected the funnel design for optimal speed and fluidity. The new funnel design is engineered for optimal flow: it's nearly 2.5x faster than our original keychain! All of this in the same cleverly designed patented dual screw cap that everyone loves! 3 easy steps: 1. Scoop - Unscrew the bottom cap to create a scoop with the barrel of the keychain. 2. Carry - Use the easy clip carabiner to store 2 full scoops of your supplement until ready to use. 3. Funnel - Unscrew the top cap to funnel the supplement into a water or drink bottle.

Deze ergonomische halterset heeft een totaal gewicht van 15 kg. De halters hebben anti-slip kunststof handvatten zodat je kunt trainen zonder dat je je zorgen hoeft te maken dat de halters uit je handen glijden of vallen. De schroefdoppen hebben sterbouten om ervoor te zorgen dat de gewichtsschijven altijd stevig en veilig op de stang bevestigd zijn. De halterstang is gemaakt van sterk metaal. Het gripoppervlak is ongeveer 14,5 cm. De gewichtsschijven zijn bedekt met robuust, vloervriendelijk kunststof, waardoor de gewichten geen vervelende aanraakgeluiden maken.

M5, 5mm Diameter, 0.8mm Pitch, Standard Coarse Thread, Cap Head, Hexagon Socket Screw/ Allen Bolt, A2 / 304 Stainless Steel Fixaball sells lengths of M5 x 0.8mm Pitch (Standard Coarse Thread), A2/ 304 Stainless Steel, Allen Socket Cap Screw/ Bolts. Descrcription: M5 socket cap screw/ bolts.Material: A2/ 304 Stainless Steel.Coating/ Finish: None.Thread: Threads are metric coarse M5 x 0.8mm pitch.Head diameter: 8.7mm.Head height: 5mm.Allen key size: 4mm.Standard: DIN 912.Note: Bolt lengths do not include the head. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus. M5, Socket Screw, Cap Head, A2/ 304 Stainless Steel, DIN 912 descriptions: M5 X 8 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 10 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 12 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 14 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 16 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 20 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 25 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 30 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 35 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 40 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 45 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 50 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 55 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL M5 X 60 SOCKET CAP SCREW DIN 912 / ISO 4762 A2-70 STAINLESS STEEL     FIXABALL – Specialist Fixings and Fasteners Suppliers Hexagon/ Allen Key Sizes METRIC – Allen Socket, Cap Head, Screw Bolts Allen Socket, Cap Head Screw Size Diameter Allen/ Hex/ Hexagon Key Required to tighten and loosen M3 2.5 M4 3 M5 4 M6 5 M8 6 M10 8 M12 10 M14 12 M16 14 M18 14 M20 17 M22 17 M24 19 Material: A2/ 304 Stainless Steel. Material/ Finish Appearance Level of Corrosion Resistance Typical Application A2/ 304 Stainless Steel Dull Shine External Intermittent weathering   Metric Coarse and Metric Fine threads are in millimetre (mm) units and were developed to simplify the imperial systems. Europe moved to this system but the Americans choose Imperial as their default. A coarse thread has less helical coils per mm and a fine one has more. Coarse is used for heavier loads and fine is used for lighter loads prone to vibrations. Coarse threads are the, 'normal', most common versions.  Image is for illustrative purposes only.

BSF, 1/4", douille Allen/hexagonale, tête cylindrique, vis/boulon, haute résistance (12,9), BS 2470. Vis d'assemblage à douille | pouces ANSI/BS 1936 | Fixaball , vend des longueurs de BSF, 1/4", douille Allen/hexagonale, tête cylindrique, vis/boulon, haute résistance (12.9), BS 2470 Qu'est-ce qu'une vis/un boulon à tête creuse ? Le terme « vis à capuchon/boulon Allen » est utilisé pour décrire une fixation qui est entièrement ou partiellement fileté. Une vis est entièrement filetée et un boulon est partiellement fileté. Certains ingénieurs peuvent les appeler des vis si la personne utilise la gamme de tailles la plus courte. Le fil reste de la même longueur à mesure que l'attache s'allonge et la longueur maximale du fil est égale à 2,5 fois le diamètre (ou environ). « Douille » fait référence à l'indentation en forme d'hexagone trouvée sur le dessus de la tête des attaches. Ici, vous pouvez utiliser une clé hexagonale (clé Allen) pour serrer et desserrer la fixation. « Cap » fait référence à la tête de forme cylindrique. Les commandes passées avant 14h sont expédiées le même jour (du lundi au vendredi). La livraison standard et gratuite est Royal Mail, 2e classe (2 à 5 jours, probablement 2 jours). Pour un délai de livraison plus rapide, sélectionnez 1ère classe ou coursier à la caisse. S'il vous plaît faites votre 'Non. d'articles dans le paquet', 'Longueur' et 'Quantité' de packs, sélection dans les menus déroulants. Longueurs de vis/boulons à douille à douille BSF 1/4" disponibles ( Entièrement fileté -FT, Partiellement fileté -PT) 1/4"-26x3/8",(FT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x5/8",(FT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x3/4",(FT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x7/8",(FT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x1",(FT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x1 1/4",(FT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x1 1/2",(PT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x1 3/4",(PT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR VIS À TÊTE CHC 1/4"-26x2",(PT) BSF RC39-43 AUTOCOULEUR 1/4"-26x2 1/4",(PT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x2 1/2",(PT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x2 3/4",(PT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR VIS À TÊTE CHC 1/4"-26x3",(PT) BSF RC39-43 AUTOCOULEUR 1/4"-26x3 1/2",(PT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR 1/4"-26x3 3/4",(PT) BSF VIS À TÊTE CHC CHC RC39-43 AUTOCOULEUR Matériaux disponibles : Haute résistance (grade 12,9) - Noir/auto-coloré Matériau/Finition Apparence Niveau de résistance à la corrosion Application typique Acier à haute résistance (12,9) Noir Utilisez de l'huile/graisse sur la fixation pour la résistance à la corrosion Environnements à faible humidité Amende standard britannique (BSF) British Standard Fine (BSF) est une forme de filetage, comme alternative à pas fin au filetage British Standard Whitworth (BSW). Il était utilisé pour les boulons et écrous en acier sur de nombreuses machines britanniques, y compris les voitures, avant l'adoption des normes unifiées, puis métriques. Pour les conditions très sollicitées, en particulier dans les motos, un fil plus fin, le British Standard Cycle (BSC), a également été utilisé. BSF a été développé par REB Crompton et son assistant George Field. Les filetages BSF utilisent la forme de filetage Whitworth à 55 degrés. Il a été introduit par la British Engineering Standards Association en 1908.

Robust, square-edged profile. Supplied with screw caps.

BSW, Whitworth 1/4", Allen/ Hexagon Socket, Cap Head, Screw/ Bolt, High Tensile (12.9), BS 2470. Socket Capscrews | Inch ANSI/BS 1936  Fixaball sells lengths of BSW, 1/4", Allen/ Hexagon Socket, Cap Head, Screw/ Bolt, High Tensile (12.9), BS 2470  What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.   1/4" BSW Socket Cap Screw/ Bolt Lengths Available (Fully Threaded - FT, Partially Threaded - PT) 1/4"-20x1/4",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x3/8",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x1/2",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x5/8",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x3/4",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x7/8",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x1",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x1 1/4",(FT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x1 1/2",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x1 3/4",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x2",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x2 1/4",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x2 1/2",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x2 3/4",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x3",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x3 1/4",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR 1/4"-20x3 1/2",(PT) BSW SOCKET HEAD CAP SCREW RC39-43 SELF COLOUR     Available Materials: High Tensile (12.9 Grade) - Black/ Self-Colour Material/ Finish Appearance Level of Corrosion Resistance Typical Application High Tensile Steel (12.9) Self-Colour (black with no surface treatment) Low, without further surface treatment - No exposure to moisture - Often Greased/ Oiled to prevent oxidisation/ rusting   UNITS OF MEASUREMENT FOR THREAD TYPES British Standard Whitworth (BSW) A thread form developed by Sir Joseph Whitworth in 1841. The thread form has rounded roots and crests, a thread angle of 55 degrees, the thread form is specified in BS 84: 1956   Image is for illustrative purposes only.

Students explore the inhalation/exhalation process that occurs in the lungs during respiration. Using everyday materials, each student team creates a model pair of lungs.

Harmonic Arts Turkey Tail Mushroom Extract - Tincture Harmonic Arts Turkey Tail is one of the most researched medicinal mushrooms in the world. In China and Japan, it is traditionally used to restore digestive balance, and fortify immune health. Dual-extracted from mycelium and concentrated fruiting body.* Features & Benefits  Mushroom Extract Gut Health Deep Immunity 50/100ml bottles come with dropper tops 500/1L bottles come with screw caps Source of fungal polysaccharides with immunomodulating properties. Use of Turkey Tail Mushroom Extract Rich in antioxidants, anti-inflammatory, and antibacterial properties, there are powerful immune-boosting abilities that can come from this supplement; preventing oxidative stress, cell damage, and growth of bacteria.  Directions Adults: 1.5 Mililitre(s) 2 time(s) per day Cautions and Warnings If you are pregnant or breastfeeding, consult a health care practitioner prior to use. Ingredients Medicinal Ingredients: *Turkey Tail (Trametes versicolor, Fruiting body) ….................. 1mL (1:5, QCE 1.075g) Non-Medicinal Ingredients: *Organic Cane Alcohol, Pure Spring Water. *Organic Dual extracted in hot water and alcohol *Disclaimer* These statements have not been evaluated by Health Canada or the FDA. This product is not intended to diagnose, treat, cure, or prevent any disease. Halo Healthcare offers a wide range of Vitamins and Supplements in Canada and the US, so you can choose the one that suits your needs. We also carry a wide range of other products as well.

UNC 1.1/4" x 2.1/2", Cap Head, Socket Screw/ Allen Bolt, High Tensile (12.9), BS 2470 Fixaball sells all lengths of 1.1/4", UNC, socket cap screws. What is a socket cap screw/ bolt? The, ‘Socket Cap Screw/ Allen Bolt,’ term is used to describe a fastener that is either fully or partially threaded. A screw is fully threaded and a bolt is partialy threaded. Some engineers may call them screws if the person uses the shorter length range of sizes. The thread stays the same length as the fastener gets longer and the maximum length of thread is equal to 2.5 times the diameter (or thereabouts). ‘Socket,’ refers to the hexagon shaped indentation found on the top of the fasteners’ head. Here, you can use a hexagon key (Allen Key) to tighten and loosen the fastener. 'Cap' refers to the cylindrical shaped head.   Orders placed before 2pm are dispatched same day (Mon-Fri). Standard, Free Delivery is Royal Mail, 2nd Class (2-5 days, most likely 2 days). For a faster delivery time, select 1st class or courier at checkout.  Please make your 'No. of Items in Pack', 'Length' and 'Quantity' of packs, selection from the drop down menus.   Fixaball – Specialist Fixings and Fasteners UNC/ UNF Socket Cap Screws Conforming to ASME/ ANSI B18.3 1960 Series All measurements in Inches   Pitch TPI Head Diameter Shank Diameter Head Height Hex Key Size Diameter UNC UNF Max Max Max Nom 1.1/4 7 12 1.75 1.25 1.25 ¾   Listing is for High Tensile – 12.9 Grade. Available Materials: Black/ Self Colour  Material/ Finish Appearance Level of Corrosion Resistance Typical Application High Tensile Steel Self-Colour (black with no surface treatment) Low, without further surface treatment -          No exposure to moisture -          Often Greased/ Oilied   UNIFIED THREAD STANDARDS  The basic American standards for fastening screw threads as agreed upon by standard bodies of Canada, the United Kingdom, and the United States. They are a complete and integrated system of threads for fastening purposes. Their outstanding characteristic is general interchangeability of threads achieved through the standardisation of thread form, diameter-pitch combinations, and limits of size. Unified National (UN) thread form with a rounded root contour, applies only to external threads. (The UN thread form has a flat, or optionally, a rounded root contour.) The majority of fasteners with a Unified thread form (UNC UNF) have a rounded root contour i.e. are UNR threads. Unified National Coarse (UNC) is a thread form with a 60 degree flank angle rounded roots and flat crests. For a given diameter it has a larger thread pitch than an equivalent diameter UNF thread. The unified thread is based on inch sizes and was first standardised in 1948 unifying the Whitworth and American standard thread forms. Image is for illustrative purposes only.