𝘽𝙡𝙖𝙘𝙠 𝙙𝙧𝙖𝙜𝙤𝙣 𝙛𝙚𝙢𝙖𝙡𝙚 𝙝𝙤𝙤𝙙𝙞𝙚, 𝙥𝙚𝙧𝙛𝙚𝙘𝙩 𝙛𝙤𝙧 𝙘𝙤𝙨𝙥𝙡𝙖𝙮 𝙖𝙣𝙙 𝙚𝙫𝙚𝙧𝙮𝙙𝙖𝙮 𝙪𝙨𝙚! Do you love dragons? Are you HTTYD fan? ME TOO! That why i created this hoodie! Imagine how it is to be a dragon. Cute one or dangerous one. Do you feel it? And how it is to be just "normal human being"? Boring right? So let's back to be a dragon! Grab your dragon hoodie! 𝗠𝗔𝗟𝗘 𝗢𝗣𝗧𝗜𝗢𝗡 𝗛𝗘𝗥𝗘: https://www.etsy.com/listing/832577431/black-dragon-hoodie-for-man?ref=shop_home_active_3 WHAT WILL YOU RECEIVE? ♥ High quality and well detailed hoodie. ♥ Cute ears on the hood ♥ durable print of the scales ♥ sleeves ended with a glove with thumb hole ♥ It has detachable wings and detachable tail. So you can take it of if you need! 𝗙𝗔𝗕𝗥𝗜𝗖: Cotton fabric with flex print 𝗦𝗜𝗭𝗘: Please, check the size chart! You can find at the last photo, but i can sew a custom hoodie with your measurements. Time of making is longer. CUSTOM SIZE? Write to me! 𝗠𝗢𝗗𝗘𝗟: Model a the photo is wearing t-shirt in size XS Models height and weight: 158cm/47kg (5′ 2/128pounds) 𝗧𝗜𝗠𝗘 𝗢𝗙 𝗠𝗔𝗞𝗜𝗡𝗚 Sewing take about 20 days. 𝗧𝗜𝗠𝗘 𝗢𝗙 𝗦𝗛𝗜𝗣𝗣𝗜𝗡𝗚: Europe about 7-14 days Worldwide 21-42 days 𝗤𝗨𝗘𝗦𝗧𝗜𝗢𝗡𝗦? If you have any questions or concerns, feel free to ask me and I can help you out! 𝗠𝗬 𝗦𝗛𝗢𝗣: https://www.etsy.com/shop/PixelStrix 𝙂𝙒𝙀𝙉 𝙃𝙊𝙊𝘿𝙄𝙀: https://www.etsy.com/listing/540054273/pink-spider-hoodie?ref=shop_home_feat_4
Halloween is fast approaching! So I thought I might share this fast costume idea :D It’s an add-on of sorts to my cosplay hoodie pattern, but it works just as well with other hoodie patterns or eve…
Unisex How to Train Your Dragon Toothless Cosplay Hoodie 3D Printed Sweatshirt Men Women Casual Pullover Streetwear Material: Polyester, breathable and comfortable to wear The hoodie can make you fantastic and outstanding when you wear it to take part in activities. Occasion: Halloween, cosplay, carnival, comic-con, party, Christmas, Xmas, masquerade, role play, fancy-dress, as well as for daily life. Ready to ship. It can be shipped within 24 hours.
Jumping up the schedule by popular demand: Toothless! I made this Toothless kigurumi (onesie) to wear to Atomic Lollipop this past July. To be honest, I had been contemplating buying a kigu for the longest time, but I had never seen a design that I really loved. So long story short, I decided to make my own. I picked Toothless because I really love the movie How to Train Your Dragon--Toothless is the most adorable dragon ever. Of all time. An added bonus here is that because it was summer, all this fleece was on sale! Definitely worth it with the amount I had to buy. My recommendation is to never under any circumstance buy fleece in fall/winter. You will pay 3 times as much as you do in summer. For reference, I bought my fleece at Fabricland in July for 6$/meter, now (September) they are selling the exact same product for 17$/meter. Yikes! I looked at kigu patterns online, but eventually decided to draft my own from scratch. It took me 2 tries to get the onesie itself looking how I wanted it and 5 tries to get the hood right. Lots and lots of mockups. Below you can see the onesie version 1 and 2 side by side. The first sleeves totally didn't work, and my hood problems were always that it was too big and floppy. After finally getting a pattern I was happy with, I moved on to cutting out all the pieces. Here are the hood pieces complete with fins, below you can see the wings and tail. I changed my initial design for the sleeve, ending up with a sleeve style similar to my Katamari cousin pattern. It is a mitten sleeve with a slit on the underside of the sleeve to slip the hand covers on and off. This means the sleeve top is made of one piece, and the under sleeve is made of 2 pieces. The bodysuit is in 2 pieces, with each half (right and left) being cut on the fold along the sides. (Meaning there are no side seams on this garment!) On each of these I first sewed up the leg and shoulder seams, then I basted the center back-crotch-front seam, stopping where the opening for the buttons would go. I hemmed the edges of the opening, then the sleeve top and bottom pieces were sewed right sides together then flipped right way out. I made sure the hand cover was on the outside. I sewed the wings and tail fins right sides together, then clipped the excess in the corners and flipped them right way out. I top stitched on the details. (Not pictured here is the red fin!) It took much deliberation, but I decided to line the hood in pink, to look like the inside of Toothless' mouth, as opposed to making it black to match the rest. I sewed the hood lining together; first I stitched the whole front together, then the back, lastly the side seam that divided the two. I sewed all of the fins right sides together, then clipped and flipped them right way out. I made a whole bunch of triangle shaped ones in varying sizes that would go up the center back seam. Carefully spacing the spines, I sewed the 2 tail pieces right sides together, then flipped it right way out. (I had to make sure the spines ended up on the correct side during this process.) Next I attached the front pieces of the out hood together. While I was at it, I put two small spines on his forehead in the center seam. While looking at reference images I carefully arranged the fins around his face, pinned them in place then sewed the side seam, completing the outer hood. The reason why the hood is made of 6 pieces is partially because it made the shape better, but also because I needed seams that I could easily attach all the fins/spines into. Next was detailing. Using leftover green fabric from Isabelle, I cut 2 ovals. Using black fabric paint leftover from Vaporeon I painted on the pupils. I pinned the eyes in place and then zig-zag stitched around the edges. This made the fabric ripple a bit, which I am not so happy about. I also zig-zagged on some nostrils while I was at it. Right sides together, I attached the hood lining to the outside along the front edge. Blarg! What is this monstrosity? Looks like Dr. Finkelstein. D; The hood was not so thrilling at first, it took some cleverly hidden stitching to keep the lining tacked in its proper place, because it wanted to curl outward. Pulling the hood lining back inside the hood so that the outside over-hanged slightly I pinned it in place. Then I stitched the two layers together along the lower edges of the eyes and on the sides of the hood opening. Trust me when I say this helped a lot. Next I put cuffs on the pant legs. I also sewed the arms into the armholes at this point. With some difficulty I put a rectangle on each side of the opening for the placket. I painted the viking skull on the red fin with white fabric paint. Way cool! Once this was dry I hand stitched these directly to the tail, which I had stuffed by this point. Then I marked for the tail placement and spaced the spikes in the back seam according, picking it out to put the spikes in, and then going over the whole thing with a permanent stitch. I measured and attached the wings, which were then tacked up with velcro so that they wouldn't flop down. I pulled the kigu over an ironing board so that I could pin the tail to the back without accidentally catching the front. Making sure the tail was extra stuffed, I pinned it in place, then stitched around the raw edge with a zig-zag stitch to keep the tail firmly in place. Lastly I added buttons and button holes to the front! 1 excellent kigu that made everyone at APop jealous. Sorry all! This kigu is one of a kind, but if someone were to commission me, I might consider making a second one. But not right now, because fleece is crazy expensive again!
Get your product How to Train Your Dragon 3 Hidden World Lightfury Toothless Pullover Hoodie, T-Shirt, Sweatshirt
You can order women's and men's custom embroidered hoodies or crewneck sweatshirts here. Add your fav embroidered picture on clothes: - cartoon characters - comics - anime - animals and flowers - lol mem pictures from the Internet etc ! We can embroider only vector/cartoony pictures, NOT real photos in this listing ------------------------------------------------------ • ORDER INFORMATION • 1) You can see the price for 1 item in the listing. 2) To order the couple set - put 2 items with their individual parameters to the cart separately, please. Also, you can order just one item - leave a note about the chosen picture to the order. ------------------------------------------------------ • HOODIE or SWEATSHIRT (CREWNECK) • Material: ∘ 70% cotton ∘ 30% polyester Size: ∘women: S, M, L ∘man: S, M, L • T-SHIRT • Material: ∘ 95% cotton ∘ 5% elastane Size (oversized): ∘women: S, M, L ∘ man (oversized): S, M, L ------------------------------------------------------ WE ARE WAITING FOR YOUR FANTASTIC EMBROIDERY IDEAS, DEAR ^^ LET'S DISCUSS AND MAKE IT REAL <3
Light fury and toothless zippered hoodie, perfect for Valentine's Day or a birthday gift, we have all sizes available
DISNEY Light How To Train Your Dragon Toothless 3D All-over Printed T-shirt Hoodie Sweater Tank. 100% premium polyester, feels as
Lightweight and comfy pullover hoodies for men and women. Preshrunk cotton blend french terry ringspun for softness. Range of colors available. Size range XS-3XL. Stitch And Toothless Change Uniform Costume Uniform
IMPORTANT NOTICE. The default color is as shown in the picture, but if you want another color (the other available color is Black, White, and Grey), please write in the note the color that you want in the bottom of the order form when you make an order, if there is no note written, we will sent the default color as shown in the picture. Buy Baby Toothless and Baby Stitch Hoodie This hoodie is Made To Order, one by one printed so we can control the quality. We use newest DTG Technology to print on to Baby Toothless and Baby Stitch Hoodie Pre-Shrunk 100% cotton, fully machine washable. Washing Instructions: – When washing your item, please turn the hoodie inside out and wash on a COLD cycle. – Do not use bleach or any fabric softener to help the overall life of your hoodie. SIZE CHART PLEASE READ CAREFULLY THE SIZE CHARTS BELOW, IT’S REFER TO UNISEX SIZE CHARTS Available size : S, M, L, XL,2XL UNISEX HOODIE: Measurement in inches : S -Width = 19.7″, Length = 25.6″ M -Width = 19.7″, Length = 26.8″ L -Width = 20.9″, Length = 28.3″ XL -Width = 23.2″, Length = 28.7″ 2XL-Width = 25.2″, Length = 29.0″ Note : Width = armpit to armpit About DTG Direct to garment printing, also known as DTG printing, digital direct to garment printing, digital apparel printing, and inkjet to garment printing, is a process of printing on textiles and garments using specialized or modified inkjet technology. The two key requirements of a DTG printer are a transport mechanism for the garment and specialty inks (inkjet textile inks) that are applied to the textile directly and are absorbed by the fibers. Most direct to garment printers are descendants of the desktop inkjet printer, therefore many DTG printers, such as the Spectra DTG, Anajet Sprint, and the BelQuette Mod1 utilize some parts from preexisting printers. Some companies, such as BelQuette, DTG Digital, AnaJet, Oprintjet, Brother, MAPI Digital, Kornit and Mimaki have printers which utilize similar technology, but are manufactured without the exact parts from any other brand machine. Buy it no! because for this product we use Kornit for best result. Digital printing technologies are non-contact, meaning that media is printed on without hand contact, allowing for a more precise image. This prevents the image distortion that takes place in screen printing. PLEASE CHECK OUR SHOP FOR MORE UP TO DATE FASHION! Please feel free to contact us, thank you for visiting!
