This wall mounted floating jewelry organizer is made with solid maple, cork board backed with a thin sheet of mdf, capped with a thin veneer of maple, and brass rods. This is a modern piece with a concept of the sun rising over the sea, representing hope and positive energy. It is dado and rabbet joined with no nails or screws, keeping the aesthetics of this piece, our number one priority. This organizer is a great platform to showcase your favorite jewelry pieces as well as an artistic piece for decor. All of our products are carefully designed and handmade in Los Angeles, California. All our lumber is first and second grade (FAS), highest quality, premium hard and exotic woods sourced and handpicked from local lumber yards. DETAILS - Hard wood: Maple *Check our shop for more wood options - Cork board for stud earrings - Three brass rods - Includes screws and drywall anchors for keyhole mounting - Length: 12 inches (30.5 cm) - Width: 2.5 inches (6.35 cm) - Height: 12 inches (30.5 cm) - Finished with a urethane gel wood finish - Wood grain and color may vary from the photograph. if you have a specific request, we will do our best to accommodate. - All knots and imperfections in the wood will be filled with casting resin. - Each product will arrive carefully packaged with the environment in mind. We use the least amount of plastic as protectively possible. - Plant for the planet, one tree at a time. This product will help us plant a tree together! MOUNTING There are two keyholes vertically aligned on the back of this piece. The two keyholes are vertically aligned so that if you wanted the extra sturdiness, you could mount it directly to a wall stud. If your wall stud is not conveniently located where you wish to mount this piece, we also include two drywall anchors that can support up to 22 lbs. Mounting this piece should be pretty straight forward since the two keyholes are perfectly, vertically aligned. However, if still uncertain, please refer to our open triangle jewelry organizer mounting instructions, as the methodology is the same. You can find them as a photograph under any of the listings. THANK YOU FOR VISITING OUR SHOP ♥ https://www.etsy.com/shop/FigureGrain CONNECT WITH US! Website: figuregrain.com Instagram: @figuregrain Facebook: @figuregrain Share with us: #figuregrain We are the original designers and makers of this product. We take intellectual property theft very seriously.
Are you in need of better jewelry organization? Display your jewelry where you can see it easily with a wall mounted jewelry organizer. Both brass bars are removable which allows for hanging earrings, bracelets, watches, etc. The top bar includes six S-hooks for hanging earrings that have ear wire hooks that are too small for the bar's diameter. Then the underside of the frame comes equipped with seven cup hooks for hanging necklaces! The depth of the frame also creates a small ledge at the bottom for storing accessories like sunglasses! The background of the frame features a hand painted texture art piece thereby combining art and function making it the perfect solution for organizing and displaying your jewelry. The brass fittings and hardware give it a lovely industrial chic vibe that will go with many different decor styles. Stay organized and trendy with a Copperluxe original Wall Mounted Jewelry Organizer! Dimensions: 16 x 8 x 1.5
These awesome DIY wall Jewelry Organizer ideas are perfect to display your necklaces, earrings, and bracelets like beautiful wall art!
Get the framed wall-mounted jewelery holder from Wayfair for $82.99 and driftwood hanging organizer from Curiographer on Etsy for $24.95+.
Buy the best Wall Mounted Jewelry Organizers selected and recommended by interior designers.
This wood, wall-mounted Jewelry Organizer includes FREE SHIPPING and features 8 glass knobs and 7 nickel-finish hooks for your necklaces and has a stationary bracelet bar. Includes two sawtooth hooks on backside for easy hanging. All of my jewelry organizers are handcrafted in my workshop in North Carolina. If you are looking for unique styles and designs, I have many to choose from! Dimensions: 12.5" wide x 5.75” tall. Multiple color finishes to choose from: White White-distressed Almond Almond-distressed Pewter Pewter-distressed Moss Moss-distressed Cascade Cascade-distressed Serene Blue Serene Blue-distressed Gray Cloud Gray Cloud-distressed Dusty Mauve Dusty Mauve-distressed Distressing is unique for each product and will vary from sample photos. Please message me for a color sample.
This wall mounted floating jewelry organizer is made with solid walnut, brass rods and brass hooks. This is a modern piece with an open triangle concept. It is dowel joined with no nails or screws, keeping the aesthetics of this piece, our number one priority. 100% solid walnut hardwood. There are absolutely no stains applied to our wood. We let the natural brilliance radiate with a urethane gel wood finish. This organizer is a great platform to showcase your favorite jewelry pieces as well as an artistic piece for decor. All of our products are carefully designed & handmade in Los Angeles, California. All our lumber is first and second grade (FAS), highest quality, premium hard and exotic woods sourced and handpicked from local lumber yards. DETAILS - Hard wood: Walnut *check our shop for more wood options - Three brass rods - 14 brass hooks - Includes screws and drywall anchors for keyhole mounting - Length: 12 inches (30.5 cm) - Width: 2.5 inches (6.35 cm) - Height: 10.75 inches (27.3 cm) - Finished with a urethane gel wood finish - Wood grain and color may vary from the photograph. if you have a specific request, we will do our best to accommodate. - All knots and imperfections in the wood will be filled with casting resin. - Each product will arrive carefully packaged with the environment in mind. We use the least amount of plastic as protectively possible. - Plant for the planet, one tree at a time. This product will help us plant a tree together! MOUNTING There are two keyholes vertically aligned on the back of this piece. The two keyholes are vertically aligned so that if you wanted the extra sturdiness, you could mount it directly to a wall stud. If your wall stud is not conveniently located where you wish to mount this piece, we also include two drywall anchors that can support up to 22 lbs. Unsure how to mount this piece? We provide mounting instructions as a photograph under this listing! *Helpful tip* The shorter the screw you use to locate the screw hole (in step 1), the more accurate your results. A half inch screw would work the best. THANK YOU FOR VISITING OUR SHOP ♥ https://www.etsy.com/shop/FigureGrain CONNECT WITH US! Website: figuregrain.com Instagram: @figuregrain Facebook: @figuregrain Share with us: #figuregrain Design patented :) We are the original designers and makers of this product. We take intellectual property theft very seriously.
Simple 1x2s and cup hooks come together to create a stunningly simple wall-mounted DIY Jewelry Organizer! See how to make your own here!
Explore our gallery of 25 most beautiful wall mounted jewelry holders you'll ever see. All shapes, sizes & styles included so you can find the right one!
What a beautiful way to display your earrings ! This wall mounted earring holder organizes your earrings and makes it easy to see what pair you want to wear ! Wall mounted organizer comes with all hardware to mount it to the wall . Hardware can be silver, brass or matte black Organizer is 15 1/2 inches tall and 10 1/2 inches wide ! Holder has 176 slots for earrings ! No exchange, cancellations or returns If you have a problem with your order please contact me so I can rectify it ! DO NOT USE MY PHOTOS AS YOUR OWN DO NOT STEAL MY PHOTOS TO USE AS YOUR OWN-YOU MAY NOT USE MY PICTURES OR ANY PART OF MY LISTINGS OR PICTURES AS YOUR OWN IN ANY WAY .NO PICTURES ON THIS POST CAN BE SHARED, RESOLD OR REDISTRIBUTED IN ANY FORM.COPYRIGHT NON-TRANSFERABLE WITH SALE. IF YOU PURCHASE A PRODUCT FEEL FREE TO TAKE YOUR OWN PICURES TO POST AND SHARE. DO NOT order product with intentions to copy ,distribute or resale as your own. Wall mounted earring display/wall mounted earring organizer/minimalist decor/ minimalist organizer/wall mounted earring holder/
Organize your jewelry collection in style with our versatile wood jewelry organizer, featuring ample space for necklaces, earrings, and more. Crafted to perfection, this wall-mountable holder not only keeps your accessories tangle-free but also adds a touch of rustic elegance to any room. Say goodbye to clutter and hello to effortless accessorizing with this must-have addition to your decor. The shelf allows for you to set earrings, rings, or even decorations on, and a metal rod for you to hang bracelets, earrings and rings! Or you can pick to have the organizer without the shelf and it will still include the brass hooks and brass rod to hang earrings from! Since these are handmade, no two organizers will look the same. Each piece of wood can have imperfections like knots or holes but this is what makes them unique! Keyhole on the back for hanging to the wall and hardware is included for hanging! Hanging instructions will be included to make sure the hanging process is as easy as possible for you! Command strips would works also for attaching to the wall if you don’t want to put holes in the wall! The gold metal rod is removable so you can easily add bracelets or rings to the rod. There are removable stops at the end of the rod to make sure the rod does not slide around at all! HOW TO ORDER: 1. PICK YOUR STAIN COLOR (REFER TO PHOTO) 2. PICK IF YOU WANT THE SHELF INCLUDED OR NO SHELF 3. PICK THE LENGTH OF THE SHELF. 12” organizer includes 15 brass hooks 18” organizer includes 23 brass hooks 24” organizer includes 31 brass hooks The shelf option will stick out about 3.5” from the wall. No shelf option will stick out about 1” from the wall. PICTURED IS DARK WALNUT STAIN! Please understand that each piece of wood takes stain differently so stain color may vary slightly. The backside of the shelf will be unfinished (not stained). There is no clear coat. Allow 1-2 weeks for item to be made. PLEASE NOTE: IF YOU PLACE AN ORDER FOR MULTIPLE SHELVES IT WILL CHARGE SHIPPING PER SHELF, I WILL REFUND OVERCHARGE ONCE LABEL IS PURCHASED. Thanks for looking! 😊 -———————————————————————- 1. Wood jewelry organizer 2. Necklace holder 3. Wall mount jewelry holder 4. Necklace hanger 5. Wood shelf organizer 6. Necklace and earring organizer 7. Jewelry storage solution 8. Handcrafted jewelry organizer 9. Rustic wood organizer 10. Space-saving jewelry holder 11. Decorative jewelry organizer 12. Wooden accessory organizer 13. Earring display stand
This beautiful jewelry holder is sure to help you keep all of your necklaces, earrings and bracelets in perfect order! Each piece is handcrafted from carefully selected solid pine wood and features high quality stains and materials. You can customize your piece by picking your desired length, colour, and either silver or gold hooks and a matching bar. DIMENSIONS (including hooks): 4.5” high 1.5” deep You choose the length - The bar comes with a very small elastic ring placed directly beside the hook so that it doesn’t move back and forth ensuring your jewelry stays where you put it! - Your jewelry holder comes with all of the necessary hardware to properly mount it on the wall. - Each piece of pine wood has its own unique grains, knots, dents, etc. which is what makes pine so beautiful. Because of this the stains can also turn out different from piece to piece. The pictures posted are from our display, so you’ll be receiving a one of a kind piece that suits all of your own preferences. STAIN INFO: - Whitewash - this is not painted white and you will see the knots, grain and potentially some of the yellow colour of the pine wood coming through the stain. - Natural pine – if you choose this option there are no stains, sealers or conditioners added to the wood. This also allows you to enjoy the natural feel and look of the pine or you can paint/stain the piece however you’d like! - All stains (with the exception of natural pine) are sealed with a protective matte coating. **Important SHIPPING info for P.O. Boxes and shipments to Newfoundland and Labrador, Yukon, Northwest Territories, Vancouver Island, Nunavut, Hawaii and Alaska: We do ship to these locations, however, additional shipping costs may be added to your order. Please contact me before placing your order and I will check the actual shipping costs. If you place an order before contacting me first, you will be charged the difference or otherwise your order will be canceled and you will receive a full refund. THANK YOU! I'm so glad you've stopped by. I truly appreciate every customer and each sale. Your support of my small shop means the world. Thank you for checking us out! **Feel free to check out more designs in my shop!**
Transform your messy jewelry pile into a functional work of art with a jewelry organizer set from Creatively Cluttered! 💠 This gorgeous set includes one necklace holder & one earring holder. The design features a vintage-style ornate frame in the color of your choice. 💠 Wall hanging frames include brackets on the back to allow you to hang on the wall. 💠 Frames measure 18 x 15 inches 💠 Necklace Holder Frame: ▪ 8 hooks are situated inside the top of the frame on wood bars to give your necklaces a cascading waterfall look. Below the frame is customizable to perfectly fit your jewelry collection. 💠 Earring Holder Frame: ▪ Wooden slats are spaced in increments to hold any length of earrings from studs to dangles. ▪ Five wooden slats are included to hold up to 50 pairs of earrings (please message me if you'd like to customize the number of slats) ▪ Spacing between slats is staggered. They begin close together to hold studs/shorter earrings on the top rows and get progressively further apart as they go down to accommodate longer earrings. If you'd prefer different spacing please let us know. 💠 We have three features to choose from for below your frames: ▪ Necklace Hooks: 9 gold hooks will hang below the frame to display your necklaces ▪ Bracelet Bar: an oak dowel with decorative ends, stained brown. The removable bar rests in two large gold hooks enabling you to easily access your bracelets. The hooks will be included but not installed when shipped. Ends of bar are fixed and do not unscrew; to remove bar simply lift out of hooks. ▪ Ring Bar: an oak dowel, stained brown. The removable bar rests in two large gold hooks enabling you to easily access your rings. The hooks will be included but not installed when shipped. To remove bar simply lift out of hooks & slide rings on and off. ********************************************** 💎 Don't have a coupon? Our VIPs are spoiled with discounts! Sign up for free at ➡ http://eepurl.com/gionbr
The Original All-in-One Space-Saving Wall Mounted Jewelry Organizer FEATURES: • Triple row of hooks - choice of Black, Silver or Gold • Cute and unique wires to hold dangle and hoop earrings • Cork panel holds stud earrings - backs stay on! • Bracelet bar won't slide off This hand-crafted jewelry holder adds a touch of charm to your room and makes it easy to display your jewelry in a way that is neat and easy to access. The color is rustic white and is coated to protect the finish. Each jewelry organizer has 3 rows of hooks that can be used for necklace or bracelet storage. It has four wires and a cork panel for easy organization of stud and hanging earrings. The small shelf is perfect for rings, watches, pins, decor, etc. Measurements: 10", 12", or 14" wide by 21" tall (including the hooks) and 3.25" deep. Hooks are staggered and large enough to hold 2 or 3 pieces of jewelry. The 10" length has 29 hooks, 12" has 35 hooks, 14" has 41 hooks. Each jewelry organizer has hangers mounted on the back for easy hanging on your wall. Need a different color or size? Message me and I can use other colors or customize the size to fit your space! Note: variations occur in each piece of wood used to make your one of a kind jewelry . Thank you for visiting my store! © 2017-2024. All Rights Reserved. Love For County. All products, images, and designs are copyrighted. jewelry organizer, jewelry organize, necklace organizer, jewelry organizer for women, jewelry organizer wood, custom jewelry organizer, wall jewelry organizer, jewelry organizer wall, jewelry organizer for wall, jewelry wall organizer, jewelry organizer wall mount, wall mount jewelry organizer, wall mounted jewelry organizer, hanging jewelry organizer, wall necklace, jewelry hanger, jewelry shelf, necklace display, jewelry holder wall, wall jewelry, jewelry holder, necklace holder, necklace hanger, jewelry display, jewelry holder wall, necklace shelf, jewelry storage, necklace holder wall, wall necklace holder, bracelet organizer, bracelet holder, jewelry tree stand, necklace rack, mother’s day gift, bridesmaid gift, housewarming gift, Christmas gift, Christmas gift for women, birthday gift for women, gift for women, birthday gift
This wall mounted floating jewelry organizer is made with solid white oak, brass rods and brass hooks. This is a modern piece with an open triangle concept. It is dowel joined with no nails or screws, keeping the aesthetics of this piece, our number one priority. There are absolutely no stains applied to our wood. We let the natural brilliance radiate with a urethane gel wood finish. This organizer is a great platform to showcase your favorite jewelry pieces as well as an artistic piece for décor. All of our products are carefully designed and handmade in Los Angeles, California. All our lumber is first and second grade (FAS), highest quality, premium hard and exotic woods sourced and handpicked from local lumber yards. DETAILS - Hard wood: White Oak *check our shop for more wood options - Three brass rods - 14 brass hooks - Includes screws and drywall anchors for keyhole mounting - Length: 12 inches (30.5 cm) - Width: 2.5 inches (6.35 cm) - Height: 10.75 inches (27.3 cm) - Finished with a urethane gel wood finish - Wood grain and color may vary from the photograph. if you have a specific request, we will do our best to accommodate. - All knots and imperfections in the wood will be filled with casting resin. - Each product will arrive carefully packaged with the environment in mind. We use the least amount of plastic as protectively possible. - Plant for the planet, one tree at a time. This product will help us plant a tree together! MOUNTING There are two keyholes vertically aligned on the back of this piece. The two keyholes are vertically aligned so that if you wanted the extra sturdiness, you could mount it directly to a wall stud. If your wall stud is not conveniently located where you wish to mount this piece, we also include two drywall anchors that can support up to 22 lbs. Unsure how to mount this piece? We provide mounting instructions as a photograph under this listing! *Helpful tip* The shorter the screw you use to locate the screw hole (in step 1), the more accurate your results. A half inch screw would work the best. VISIT OUR SHOP FOR MORE PRODUCTS! https://www.etsy.com/shop/figuregrain CONNECT WITH US! Website: figuregrain.com Instagram: @figuregrain Facebook: @figuregrain Share with us: #figuregrain Thank you for visiting our shop ♥ Design patented :) We are the original designers and makers of this product. We take intellectual property theft very seriously.