Minimalist Wood PC: Hi! For my first Instructables, I want to share with you my process behind the creation of a wooden PC. This was my first attempt at woodworking and PC building, so I wasn't expecting much for my first project. At the end, it turned out quite amazin…
SSUPD Meshlicious and Meshroom S Meshroom D custom vented Top and Front panels! These complete replacements offer more airflow and a unique look to you SSUPD case. Made of real wood or matte acrylic. Custom designs available by request. This listing is for TWO panels, a front and top panel come with every order. FEATURES: - Complete replacements - Installs like the original panels - Multiple designs and colors available - Compatible with the Meshlicious and Meshroom S - Each order is for one top and front panel - Each pair is made from one solid piece of material, so the grain flows to each piece COLORS: - Walnut (wood) - Cherry (wood) - Maple (wood) - Solid matte black (acrylic) - Solid matte white (acrylic) *All acrylic panels are shipped with the paper still attached to prevent scratches during shipping. *This listing is for a front and top panel only, case is not included, side panel not included. Materials: Walnut,maple,cherry,acrylic
Wood Carved Computer Case: Here is a project I have been working on the last 3 weeks. I have carved a computer out of MDF, stained it with my own mix of acrylic paint and linseed oil then finished off with a varnish. I hope you enjoy.
High Airflow Wood Texture Front Panel Design for maximum airflow and cooling performance 4x pre-installed black fans for optimal cooling. Compact mid-tower design with up to E-ATX motherboard support Easy accessibility to I/O featuring 1x USB 3.0, 1x USB-C Charging port, Mic/Headphone combo, Power button, Up to 360mm Radiator support for liquid cooling builds and vertical GPU mounting with optional bracket (sold separately)
Building a wooden home theater PC computer case.
Inspired by Japanese Kumiko woodworking, Nick Falzone made this exquisite wooden scratch-build with a custom hard-tube water-cooling system.
Building a wooden home theater PC computer case.
We've seen PC cases, peripherals, and lots of other electronic devices made of wood before, but this redwood PC case, keyboard, mouse and monitor take the new crown as the best yet. We noticed, too, that the maker of this PC case has taken ventilation into account, with slots on the two visible sides, and probably…
Inspired by the classic Zenith radios of the 1920s and 1930s, featuring a strong Art Deco style, this scratch built mod reaches the heights of the modding masters, thanks to integrated watercooling and parts from a classic radio to complete the design.
After running a much-loved-but-aging desktop with a GTX 660 and a CPU over a decade old, it was finally time for an upgrade. I got a great deal on a desktop with a middle-aged i5 and an AMD RX 580 graphics card - still nothing top shelf, but doubling the cores and over doubling the graphics processing power is nothing to scoff at. Problem is, it might have had the speed, but it didn't have any style (that, and it sounded like a 747 about to take flight in my bedroom). Buying a better case and fans was the obvious choice, but this seemed like an opportunity to be unnecessarily thrifty and add some personality to the build. Before I launch into the build details, a quick rundown of the specs and budget: Intel Core i5 3550 quad core CPU - definitely on the old side, but extremely stable and usable RX 580 GPU - Still arguably the best mid-tier graphics unit for the money 8 gigs RAM - 16 would certainly be nice, but 8 will suffice. 480 GB SSD, 1 TB HDD Antec 650w PSU Stylish, quiet form factor Performance: UserBenchmark score of "Destroyer" for gaming, "Yacht" for desktop use, and "Jet ski" for workstation use ~50 FPS in AC Odyssey, 1080p ultra ~90 FPS in DOOM, 1080p ultra ~100 FPS in Fortnite, 1080p high/ultra All in all, not a top tier rig, but better than most consoles and more than good enough for my needs. The total budget? Less than $300. A quick Google search pulls up no shortage of creative PC cases, plenty from glass and metal, a decent amount made of wood, and a surprising amount of fire hazards cardboard cases. I didn't go for anything really wild, and stuck to a pretty traditional desktop design, but with some practical aesthetic choices and minimized as much as possible. The goal from the start, as usual, was to build on as small a budget as possible. Including overbought materials, fans, sandpaper, and full cans of stain that I only used a little bit of, the costs are a little under $50. Including just the box and only as much stain and hardware as was actually used, the cost was under $15! To make the entire case, I needed exactly one 2' x 4' x 3/8" piece of sanded plywood. I bought two because I wasn't sure beforehand if I could finesse all the pieces onto it. You could also use thicker wood for a little more strength and soundproofing, but it'll be a tad more expensive, harder to work with, and heavier, your call. Measure 3 times, cut once. This way I only messed up a couple things instead of a lot of things! A cheap table saw made swift work of the thin panels. Clamping supports to attach the sides to the bottom securely. I highly recommend Titebond II for most woodworking projects. Starting the test-fitting process Clamping the sides together was possibly the easiest part to mess up and attach everything skewed, but if you measure carefully and put interior supports in the right places it's not too bad. Test-fitting the PSU. Because the power supply is pretty heavy, this was one of the more important parts to get just right (you certainly don't want it crashing down on your GPU and motherboard!). Fortunately after gluing large supports underneath and bolting it to the back, it's rock solid. For a slightly easier build, you could always put it on the bottom instead. I built the top front panel at an angle to make the power button extra accessible, eliminate a little deadspace for marginally better airflow, and give it a little more personality than just a plain ol' box. Time to fill the edges with trusty wood filler. Once the wood filler dries, I sanded all the corners to give it a more finished look. This helped tremendously, more than the pictures show. I designed it so that the side panel would swing open for easy access to the internals, and gave it a stylish lil curve. I stained the main body walnut and the door a darker espresso to give it +5 to style. Mounting the door with hinges went smoothly. I planned to add a latch to the bottom but the fit is snug enough when closed there was no need. Side-by-side comparison to the old case: both micro ATX, so the old one wasn't a particularly large case to begin with. This one, however, eliminated the majority of the unused space, at no cost except for the DVD drive. Mounting the motherboard was easier than expected: I cut rings out of a cheap pen to use as motherboard spacers and screwed it directly into the wood. It's quite secure, although I still don't know if I'd entrust it to FedEx and expect it to survive perfectly. The GPU was somewhat trickier, because of the way PCIE devices mount to the rear of the case. I ended up with a somewhat janky block tacked on to the rear, but hey, it works. Added a hard drive and fans and turned it on with a screwdriver. It didn't work. Panic began to set in. I realized the PSU was still off, sheepishly flipped the switch, and it worked fine. While waiting for the new switch to arrive in the mail, I got tired of turning it on with a screwdriver, took off the front panel of the old case, and used that power switch for a couple weeks in an exceedingly odd setup, but it worked fine. It looked like a birdhouse with the hole in it and all, but hey, it worked! Finally got the power switch and a second Arctic F12 Silent fan to install, and it was pretty much complete. The switch works like a charm and the fans keep it very quiet. It's not quite silent, but it's about a quarter as loud as the previous case/fans combo, which is great for recording music. The LED switch at night looks pretty alright, and is the only exception to the otherwise "non-RGB-ness" of this build. I finally caved and got a 480gb SSD drive, which was just large enough to migrate everything from the previous drive to. It makes it just a tad quieter and makes it approximately twice as fast at bootup and opening files, which is a lovely upgrade, and when I fill it up I can always add the 1tb HDD back to store files. To recap the budget, here's a quick rundown: $15 or so for supplies to build the case $15 for two Arctic fans $60 for the 480 gb SSD $250 for the original PC, which included everything else, as well as a nice router and a subpar monitor (worth at least $50 for the two) $250-$300 is comfortably within console budget, but with all the triumphs and headaches that come with being a PC instead. It's not quite as compact, but it's a lot quieter and more unobtrusive than most gaming computers out there, while still being a competent all-around machine that definitely punches above its weight class in terms of performance per dollar. Hope you've enjoyed the read, and maybe that my build will help or inspire someone else's in a little way as well!
In Win experimenting with wood covers on PC cases
When I see an ornate cabinet or a beautifully sculpted chair, I often forget how much design and hard work must have gone into creating it. Every detail required precision and care. It can be easy to take for granted how accessible wooden goods are, but behind every elaborately crafted piece is an enthusiast who devoted time, energy and passion into it. To recognize some of these artists, we at Bored Panda have compiled this list of some of the most unique and impressive woodworking projects proud craftsmen have shared on the subreddit r/Woodworking. From cutting boards to cabinets to nightlights, we hope you will enjoy appreciating these designer pieces as much as we did.
