Of late I've been getting 2kg 300 metre 3mm rolls of PLA (from Lybina in Bayswater). No reel holder would come close to holding a reel so wide so

Very basic adapter to mount two 2.5" SSD drives in a common 5.25" drive bay.You can use the modifier mesh to remove top and bottom surfaces

These are the STL files of the great Clock of TheGoofy.I rotated some models for an easy print.

Amazon.com: AMOLEN 3D Printer Filament Bundle, PLA Filament 1.75mm, Dual Color Filament, Silk Red Gold, Silk Red Green, Silk Red Blue, Silk Blue Green, 3D Printing Filament 200gX 4 Spools : Industrial & Scientific

This is a universal paste extruder for RepRap and other 3D printers.It allows you to experiment with various pastes on your 3D printer without the nee

update 2(2016/11/25) added printable spacers and a motor mount plate for 20mm npm motorupdate 1(2015/2/6) : added assembly sequence sheet . this is

Sullivan Delanoe printing chocolate using a 3D bioplotter. This was his project while on a 9 week internship at WCPC. Sullivan is currently studying at Pagor...

At normal listening distances, an array of twelve speakers arranged on the faces of a dodecahedron is a very good approximation of a point sound source,

Part 2 - https://youtu.be/uBfMoOqCgPcPart 3 - https://youtu.be/4jk6kZIwsQAPart 4 - https://youtu.be/EQJfDLENYnUMy Shop: https://www.scottyujan.comAll music b...

3d printed ceramicsvase lamp digital design

We went through the designs on Thingiverse and found some cool and useful free 3d models for printing which can be used to improve the quality of everyday life.

Printed CR10s 200 nozzle degrees, 65 bed, .8mm nozzle, .3 layer height, 20% infill, tuned out great. The top of the hands have little holes. I used

This is an improved X-End Clamp for the allready improved X-Ends by nophead.Together with the Z-Min-Endstop mount you can use a M4 screw to adjust you

This is a universal paste extruder for RepRap and other 3D printers.It allows you to experiment with various pastes on your 3D printer without the nee

Overview This is same Walt's Fully Printed Glider model, but optimized for 0.2mm nozzle to reduce weight and tweaked a little bit to improve pr

3D Print and 3D printers (@namu3d) • Instagram photos and videos

This is the stock gear that comes on the Ultimaker Stepper motor. Modified for printing in ABS. If you are like me you have to mash your first print l

After trying to install PLA printed LM8UU bearings on the prusa i3 rework by emotion techsX carriage I noticed the X carriage wasn't fitting corr

Vulcanus MAX - CoreXY Aluminum Frame 3D Printer Scale UP: On May 11, 2015 vulcaman published the Vulcanus V1 3D printer on his instructables channel. Coincidentally reprapalgarve was working on a coreXY project and when we saw Vulcanus V1 we immediately jumped on to the wagon. With the experience we had s…