This is a print cooling fan upgrade for the MTW Minimax. You'll need to swap out the 40mm axial fan that comes with the kit for a 4020 (40mm x 2

My QU-BD extruder was stopping a lot so I made some modifications. The primary problem was the way they push the filament against the drive gear with

Holder for MXL 6-7mm belt (use on Simple Tower XL)

J - Head extruder mount for a Da Vinci 1.0 printer. e3d v5 - v6. m3 30mm screws will be needed. To get a more secure fit with the E3d-v6 I put 1 la

The macroline fittings on the stock replicator extruder bracket began to weaken and flex. (see picture of my stock part.) This caused an annoying crea

Case for OLED 3D Board TOPIC: http://spainlabs.com/foro/viewtopic.php?f=34&t=3686

Occasionally having trouble with small tall objects, I decided to make http://www.thingiverse.com/thing:4442 which is adding a fan to cool down small

I started with the modified paste extruder available on thingiverse, but quickly found I needed a more accurate extruder.I moved to a modified syringe

This is notionally based on the Printruder II extruder body. I like the basic design, but I had problems with filament getting kinked in the empty ai

A better box for my Arduino/RAMPS combination with a 60mm fan on my MendelMax, with easy clip-on mount. Note: new4b should fix the sticking_out prob

Similar mounts slip under the hot-end mounting plate. My mount bolts directly to the extruder body (assuming yours has holes like mine) I used the du

Note: Prototype 3 is available: http://www.thingiverse.com/thing:454584 Also, I am selling a limited number of pc board kits for prototype 3 at:http:

Heater block and M3 stud thermistor from this hotend design were published before as DIY parts. Now, whole hotend is available for 3mm and 1.75mm fila

I needed a Z-stop which only requried the m2 bolts, that already held the Z-stop in place. I'am using this with a 4mm glass plate, and the Z-Stop

Ultimaker2 rail system (U2RS) , if you ever publish something compatible with these rails please TAG it with "U2RS".A printable back plate t

Check out the power of spray paint with these fun and frugal DIY transformations!

I'm obsessed with 3D Printing. Let's be friends!Contact me at: [email protected]

This builder grade mirror update is an easy project for you. This flexible molding will make a huge difference and take your mirror to another level!

Adding that custom feel to our builder grade home…little by little 🤎 We love finding ways to add warmth, texture and a custom touch to our basic, builder grade home…and doing it on a budget! DIYs that we have done that you could do too: -Ceiling Treatment of some kind! -Adding Cabinets for extra storage (or creating desks like we did) -Painting existing cabinets + update your cabinet hardware -Update light fixtures -Faux beams (these add so much warmth & texture) 🤩 -Wall treatment (shipla...