Jesus dizia, pois, aos judeus que criam Nele: Se vós permanecerdes na minha palavra, verdadeiramente sereis meus discípulos; E conhecereis...

Who is it for? Developed especially for babies, toddlers and children, this friendly bacteria supplement contains a unique blend of 3 of the most scientifically researched strains for children from 0 to 12 years, as well as FOS fibres and added vitamin D3 to help maintain immune health.   Optibac Probiotics Strains Bif

Heading Manufactured to the highest standards of potency and purity. Purpose Dietary Supplement Manufacturer Pharmavite Active Ingredients 1 packet: Total Carbohydrate < 1 g; Sugars 0 g; Vitamin A 20% as Beta Carotene 5,000 IU; Vitamin C 560 mg; Vitamin D3 400 IU; Vitamin E 45 IU; Vitamin K 10 mcg; Thiamin 1.5 mg; R

Discover the power of mental health with these inspiring quotes that promote well-being and 0 d3 self-care. Take a moment to prioritize your mental well-being and find strength in these words of wisdom. #MentalHealth #Quotes #SelfCare #Wellbeing #Mindfulness #SelfLove #PositiveVibes #Inspiration #Motivation #Healing #InnerStrength #SelfAcceptance #Gratitude #SelfReflection #Empowerment #MentalWellness #MentalHealthMatters #EmotionalWellbeing #SelfCompassion #MindBodyConnection #SelfGrowth. Pin t

Lowongan Kerja Staff Admin Center di Sicepat 2024 Si Cepat merupakan  perusahaan ekspedisi di Indonesia yang didirikan pada 2014.Saat ini Sicepat sedang membuka lowongan kerja staff admin center dengan kualifikasi sebagai berikut : Deskripsi Pekerjaan Melakukan screening kandidat yang sudah masuk databaseAnalisa data terkait fulfillmentValidasi berkas calon Man Power Input data Man PowerKualifikasi : Min D3 (semua jurusan)Pengalaman 0-3 tahun dibidang terkaitMahir mengoprasikan Ms. Office  Bersedia diproses melalui pihak ketiga (outsourcing) Penempatan JakartaJika anda berminat dengan lowongan kerja ini, segera kirimkan lamaran anda ke email : [email protected] : ( Name ) - ( Position ) Untuk update informasi lowongan kerja terbaru, silahkan akses halaman https://nugasin.com/loker

The first RCT demonstrated improved outcomes of those with COVID when given vitamin D. ⚡️ The study included 76 patients with COVID-19. ⚡️ 50 of 76 patients were treated with vit D. ⚡️ 1 out of 50 patients (2%) with vit D were admitted to the ICU (2%) and 0 died. ⚡️ 13 out of 26 patients (50%) not given vit D were admitted to the ICU and 2 died. Ask your dr to test your 25-hydroxy vit D levels. Sources: sunshine, wild canned salmon, egg yolks, mushrooms, & a quality supplement (D3 + K1/K2)

Shop shopkathyco's closet or find the perfect look from millions of stylists. Fast shipping and buyer protection. Lilly Pulitzer Caw Me Bird Print Newport Dress New With Tags 100% Silk Size 0 Shift Dress Adorable shift dress with love bird style birds and a fun pattern. New with tags, retails for $268. 100% stretch silk. Square neckline. Classic and sophisticated silhouette in a fun print in green, navy, turquoise, and white with 3/4 sleeves. Modest, relaxed style. Shipped fast from a smoke free, pet free home! Feel free to ask questions or make an offer :) SKU: D3 Date night wedding guest vacation cruise going out party club vacation cruise dinner sorority event dance engagement bachelorette

TLDR: Creating weather radials with highcharter and ggplot2. I was surfing by the deep seas of the web and I found the Brice Pierre de la Briere’s blocks and I saw the weather radials which originally are a poster collection. Brice uses D3 and he used D3 very well and I love D3 but I’m in a rookie level to do something like him. D3 is not for everybody and surely not for me, I would love to lear more but family, work and R has priority over D3 so how can I do something like that. Well… We have R & highcarter. So let’s try. We’ll use the same data as Brice [https://www.wunderground.com/]. df % str_replace("\s+", "_") df % mutate(id = seq(nrow(df)), date2 = as.Date(ymd(date)), tmstmp = datetime_to_timestamp(date2), month = month(ymd(date))) dsmax % select(x = tmstmp, y = max_temperaturec) %>% list.parse3() dsmin % select(x = tmstmp, y = min_temperaturec) %>% list.parse3() First try Here we test and chart the data in the most simple way. A line time. hc % hc_chart( type = "line" ) %>% hc_xAxis( type = "datetime", tickInterval = 30 * 24 * 3600 * 1000, labels = list(format = "{value: %b}") ) %>% hc_yAxis( min = 0, labels = list(format = "{value} C") ) %>% hc_add_series( data = dsmax, name = "max" ) %>% hc_add_series( data = dsmin, name = "min" ) %>% hc_add_theme( hc_theme_smpl() ) hc open Everything seems fine. Second Step We’ change the type to column, stack and see what is the result hc % hc_chart( type = "column" ) %>% hc_plotOptions( series = list( stacking = "normal" ) ) hc open Not so close. Final Step If you see the previous chart we stacked so we sum the min and max and the data don’t reflect the value (min,max) what we want. So we need to create the difference between the max and min, and plot them with the min value and hiding using a transparent color. And set polar = TRUE obviously. dsmax % mutate(color = colorize_vector(mean_temperaturec, "A"), y = max_temperaturec - min_temperaturec) %>% select(x = tmstmp, y, name = date, color, mean = mean_temperaturec, max = max_temperaturec, min = min_temperaturec) %>% list.parse3() # Some tooltips to make it a little *intercative* x % hc_yAxis( max = 30, min = -10, labels = list(format = "{value} C"), showFirstLabel = FALSE ) %>% hc_add_series( data = dsmax ) %>% hc_add_series( data = dsmin, color = "transparent", enableMouseTracking = FALSE ) %>% hc_add_theme( hc_theme_smpl() ) %>% hc_tooltip( useHTML = TRUE, headerFormat = as.character(tags$small("{point.x:%d %B, %Y}")), pointFormat = tltip ) hc open Yay :D! A beautiful chart same as the d3 version and only using R. So sweet! I’m happy with the result. This is not a standar chart but is a king of artistic. What do you think? Any other examples to test this type of chart? Bonus Track: ggplot2 version It’s really really easy to do this type of chart in ggplot2 using geom_linerange and geom_polar: library("ggplot2") library("viridis") library("scales") ggplot(df, aes(date2, ymin = min_temperaturec, ymax = max_temperaturec, color = mean_temperaturec)) + geom_linerange(size = 1.3, alpha = 0.75) + scale_color_viridis(NULL, option = "A") + scale_x_date(labels = date_format("%b"), breaks = date_breaks("month")) + ylim(-10, 35) + labs(title = "San Francisco Wather Radial", subtitle = "It would be nice if someone do this with the animation package", caption = "Other example for ggplot2 vs base #boring but #fun", x = NULL, y = NULL) + coord_polar() + theme_jbk() + theme(legend.position = "bottom") Nice! Searching I found someone do this: Always exist someone who did what you did before you. At least I share the code! :D. source

****** A lot of people land on this page. Welcome. There are a few updates on this project (the last being here.) so it's worth checking through the blog for updates. Thanks ****** It's been a great summer here in the UK. I built myself something I'd always wanted. A bit of a water feature in my garden. The sound of trickling water whilst relaxing in the garden ... ahhhh ! Well, I didn't like the thought of the pump running all night, wasting all that precious energy, so a solution was required.... The usual thoughts of a photodiode (even an led works as a photodiode, try it!) or LDR and comparator were soon dispelled, as I'd done such things as a kid, and it's a horrible thing to set up. Clouds causing shadows, neighbours outside lights switching it on etc etc ... no , we need something a little more sophisticated. Now, a guy called Paul had done the same thing, but backwards (switching something on at dusk, and off at dawn), and his website here shows a rather nice unit built using recycled bits and pieces. "Just the job".. except I need more coding experience, so I blatantly copy some of Paul's thoughts and the use of the Timelord library. Although I love the idea of recycling the display, I just don't have anything to recycle at present, other than the usual 2 x 16 LCD I've removed from a DAB radio, and a nice rotary encoder, so we'll go with those. Now, keeping time.... This is a DS1307 module, purchased at very little expense (but a bit of a wait) on eBay. It's a fully fledged real-time clock, which sends it's data via an I2C interface. Just the job. On the rear of this fella is a button cell holder. Just beware. Order yours with the battery. You can get a version which takes an ordinary 2023 Lithium coin cell, or an LIR2023 Lithium-ion coin cell, which charges off the supplied 3.3 or 5 volts. Don't try and charge an ordinary 2023 cell. It won't be pretty. OK, so that's our time keeping sorted. So, time to conjure up some hardware.... My 5v supply is a little buck converter, which is driven from the 24VAC from the pond transformer. The Arduino (Nano in this example) is mounted on a bit of perf board, along with a relay module and the DS1307 RTC board. Now copy the code into your IDE, and alter the LATITUDE and LONGITUDE constants to your position on the planet. Google maps comes in handy here, or just pop outside with a GPS. Upload the code (below) and your display should show something like this. American users may wish to note the date is in the UK standard (DD/MM/YYYY), you can, of course, alter the code to suit your own preferred format. Now, if that's not UTC (and unless you're in the UK in winter, or your PC is set to UTC, it won't be) press and hold the button for 5 seconds. When you release the button the display will show "Set Year". You can alter this using the rotary encoder. If the encoder works back to front, reverse the wires to pins D2 & D3 on the Arduino board. Pressing the button moves the menu on to set Month. Pressing again, set the day, then hour and then minute. Once the minute is set the RTC is set, and the clock display will revert after 1 second. Excellent. The clock is now set and running. Pressing and releasing the button once will display the current calculated sun rise and sunset time. If you wait the display will revert back to the clock after a few seconds. Pressing again whilst the sunrise and sunset times are display will allow you to alter the mode of the clock. Auto switches the output on when the sun rises, and off when it sets. On switches the output on permanently. Finally off leaves the output off. Finally, mount the whole shooting match on the wall, make it neat and go for a pint or two to celebrate! Here's the code: // Dawn & Dusk controller. // 16th August 2014. // (C) A.G.Doswell 2014 // // Date and time functions using a DS1307 RTC connected via I2C and Wire lib // // Designed to control a relay connected to pin A3. Pin goes low during daylight hours and high during night. Relay uses active low, so is // "On" during the day. This is connected to the fountain pump in my garden. // // Time is set using a rotary encoder with integral push button. The Encoder is connected to interrupt pins D2 & D3 (and GND),  // and the push button to pin analogue 0 (and GND) // The RTC is connections are: Analogue pin 4 to SDA. Connect analogue pin 5 to SCL. // A 2 x 16 LCD display is connected as follows (NOTE. This is NOT conventional, as interrupt pins are required for the encoder) //  Arduino LCD   //  D4      DB7 //  D5      DB6 //  D6      DB5 //  D7      DB4 //  D12     RS //  D13     E // // Use: Pressing and holding the button will enter the clock set mode (on release of the button). Clock is set using the rotary encoder.  // The clock must be set to UTC. // Pressing and releasing the button quickly will display the current sun rise and sun set times. Pressing the button again will enter the mode select menu.  // Modes are AUTO: On when the sun rises, off when it sets. //           ON: Permanently ON //           OFF: Permanently OFF (Who'd have guessed it?) // // Change the LATTITUDE and LONGITUDE constant to your location. #include  #include "RTClib.h" // from https://github.com/adafruit/RTClib #include  #include  // from http://www.pjrc.com/teensy/td_libs_Encoder.html #include  // from http://swfltek.com/arduino/timelord.html. When adding it to your IDE, rename the file, removing the "-depreciated" RTC_DS1307 RTC; // Tells the RTC library that we're using a DS1307 RTC Encoder knob(2, 3); //encoder connected to pins 2 and 3 (and ground) LiquidCrystal lcd(12, 13, 7, 6, 5, 4); // I used an odd pin combination because I need pin 2 and 3 for the interrupts. //the variables provide the holding values for the set clock routine int setyeartemp; int setmonthtemp; int setdaytemp; int sethourstemp; int setminstemp; int setsecs = 0; int maxday; // maximum number of days in the given month int TimeMins; // number of seconds since midnight int TimerMode = 2; //mode 0=Off 1=On 2=Auto int TimeOut = 10; int TimeOutCounter; // These variables are for the push button routine int buttonstate = 0; //flag to see if the button has been pressed, used internal on the subroutine only int pushlengthset = 3000; // value for a long push in mS int pushlength = pushlengthset; // set default pushlength int pushstart = 0;// sets default push value for the button going low int pushstop = 0;// sets the default value for when the button goes back high int knobval; // value for the rotation of the knob boolean buttonflag = false; // default value for the button flag const int TIMEZONE = 0; //UTC const float LATITUDE = 51.89, LONGITUDE = -2.04; // set YOUR position here int Sunrise, Sunset; //sunrise and sunset expressed as minute of day (0-1439) TimeLord myLord; // TimeLord Object, Global variable byte sunTime[] = {0, 0, 0, 1, 1, 13}; // 17 Oct 2013 int SunriseHour, SunriseMin, SunsetHour, SunsetMin; //Variables used to make a decent display of our sunset and sunrise time. void setup () {     //Serial.begin(57600); //start debug serial interface     Wire.begin(); //start I2C interface     RTC.begin(); //start RTC interface     lcd.begin(16,2); //Start LCD (defined as 16 x 2 characters)     lcd.clear();     pinMode(A0,INPUT);//push button on encoder connected to A0 (and GND)     digitalWrite(A0,HIGH); //Pull A0 high     pinMode(A3,OUTPUT); //Relay connected to A3     digitalWrite (A3, HIGH); //sets relay off (default condition)          //Checks to see if the RTC is runnning, and if not, sets the time to the time this sketch was compiled.     if (! RTC.isrunning()) {     RTC.adjust(DateTime(__DATE__, __TIME__));   }         //Timelord initialisation     myLord.TimeZone(TIMEZONE * 60);     myLord.Position(LATITUDE, LONGITUDE);     CalcSun (); }             void loop () {        DateTime now = RTC.now(); //get time from RTC     //Display current time     lcd.setCursor (0,0);     lcd.print(now.day(), DEC);     lcd.print('/');     lcd.print(now.month());     lcd.print('/');     lcd.print(now.year(), DEC);     lcd.print(" ");     lcd.setCursor (0,1);     lcd.print(now.hour(), DEC);     lcd.print(':');     if (now.minute() <10)       {         lcd.print("0");       }     lcd.print(now.minute(), DEC);     lcd.print(':');     if (now.second() <10)       {         lcd.print("0");       }     lcd.print(now.second());     lcd.print(" ");          //current time in minutes since midnight (used to check against sunrise/sunset easily)     TimeMins = (now.hour() * 60) + now.minute();          // Calculate sun times once a day at a minute past midnight     if (TimeMins == 1) {       CalcSun ();     }     if (TimerMode ==2) {       if (TimeMins >= Sunrise && TimeMins <=Sunset-1) { //If it's after sunrise and before sunset, switch our relay on           digitalWrite (A3, LOW);           lcd.setCursor (13,1);           lcd.print ("On ");         }         else { //otherwise switch it off           digitalWrite (A3, HIGH);           lcd.setCursor (13,1);           lcd.print ("Off");         }       }        if (TimerMode ==0) {          digitalWrite (A3, HIGH);          lcd.setCursor (13,1);          lcd.print ("Off");        }              if (TimerMode ==1) {          digitalWrite (A3, LOW);          lcd.setCursor (13,1);          lcd.print ("On ");        }          pushlength = pushlengthset;     pushlength = getpushlength ();     delay (10);          if (pushlength pushlengthset) {          lcd.clear();          DateTime now = RTC.now();          setyeartemp=now.year(),DEC;          setmonthtemp=now.month(),DEC;          setdaytemp=now.day(),DEC;          sethourstemp=now.hour(),DEC;          setminstemp=now.minute(),DEC;          setclock();          pushlength = pushlengthset;        }; } //sets the clock void setclock (){    setyear ();    lcd.clear ();    setmonth ();    lcd.clear ();    setday ();    lcd.clear ();    sethours ();    lcd.clear ();    setmins ();    lcd.clear();        RTC.adjust(DateTime(setyeartemp,setmonthtemp,setdaytemp,sethourstemp,setminstemp,setsecs));    CalcSun ();    delay (1000);     } // subroutine to return the length of the button push. int getpushlength () {   buttonstate = digitalRead(A0);        if(buttonstate == LOW && buttonflag==false) {               pushstart = millis();               buttonflag = true;           };                   if (buttonstate == HIGH && buttonflag==true) {          pushstop = millis ();          pushlength = pushstop - pushstart;          buttonflag = false;        };        return pushlength; } // The following subroutines set the individual clock parameters int setyear () {    lcd.setCursor (0,0);     lcd.print ("Set Year");     pushlength = pushlengthset;     pushlength = getpushlength ();     if (pushlength != pushlengthset) {       return setyeartemp;     }     lcd.setCursor (0,1);     knob.write(0);     delay (50);     knobval=knob.read();     if (knobval < -1) { //bit of software de-bounce       knobval = -1;     }     if (knobval > 1) {       knobval = 1;     }     setyeartemp=setyeartemp + knobval;     if (setyeartemp < 2014) { //Year can't be older than currently, it's not a time machine.       setyeartemp = 2014;     }     lcd.print (setyeartemp);     lcd.print(" ");     setyear(); }    int setmonth () {    lcd.setCursor (0,0);     lcd.print ("Set Month");     pushlength = pushlengthset;     pushlength = getpushlength ();     if (pushlength != pushlengthset) {       return setmonthtemp;     }     lcd.setCursor (0,1);     knob.write(0);     delay (50);     knobval=knob.read();     if (knobval < -1) {       knobval = -1;     }     if (knobval > 1) {       knobval = 1;     }     setmonthtemp=setmonthtemp + knobval;     if (setmonthtemp < 1) {// month must be between 1 and 12       setmonthtemp = 1;     }     if (setmonthtemp > 12) {       setmonthtemp=12;     }     lcd.print (setmonthtemp);     lcd.print(" ");     setmonth(); } int setday () {   if (setmonthtemp == 4 || setmonthtemp == 5 || setmonthtemp == 9 || setmonthtemp == 11) { //30 days hath September, April June and November     maxday = 30;   }   else {   maxday = 31; //... all the others have 31   }   if (setmonthtemp ==2 && setyeartemp % 4 ==0) { //... Except February alone, and that has 28 days clear, and 29 in a leap year.     maxday = 29;   }   if (setmonthtemp ==2 && setyeartemp % 4 !=0) {     maxday = 28;   }       lcd.setCursor (0,0);     lcd.print ("Set Day");     pushlength = pushlengthset;     pushlength = getpushlength ();     if (pushlength != pushlengthset) {       return setdaytemp;     }     lcd.setCursor (0,1);     knob.write(0);     delay (50);     knobval=knob.read();     if (knobval < -1) {       knobval = -1;     }     if (knobval > 1) {       knobval = 1;     }     setdaytemp=setdaytemp+ knobval;     if (setdaytemp < 1) {       setdaytemp = 1;     }     if (setdaytemp > maxday) {       setdaytemp = maxday;     }     lcd.print (setdaytemp);     lcd.print(" ");     setday(); } int sethours () {     lcd.setCursor (0,0);     lcd.print ("Set Hours");     pushlength = pushlengthset;     pushlength = getpushlength ();     if (pushlength != pushlengthset) {       return sethourstemp;     }     lcd.setCursor (0,1);     knob.write(0);     delay (50);     knobval=knob.read();     if (knobval < -1) {       knobval = -1;     }     if (knobval > 1) {       knobval = 1;     }     sethourstemp=sethourstemp + knobval;     if (sethourstemp < 1) {       sethourstemp = 1;     }     if (sethourstemp > 23) {       sethourstemp=23;     }     lcd.print (sethourstemp);     lcd.print(" ");     sethours(); } int setmins () {    lcd.setCursor (0,0);     lcd.print ("Set Mins");     pushlength = pushlengthset;     pushlength = getpushlength ();     if (pushlength != pushlengthset) {       return setminstemp;     }     lcd.setCursor (0,1);     knob.write(0);     delay (50);     knobval=knob.read();     if (knobval < -1) {       knobval = -1;     }     if (knobval > 1) {       knobval = 1;     }     setminstemp=setminstemp + knobval;     if (setminstemp < 0) {       setminstemp = 0;     }     if (setminstemp > 59) {       setminstemp=59;     }     lcd.print (setminstemp);     lcd.print(" ");     setmins(); } int setmode () { //Sets the mode of the timer. Auto, On or Off     lcd.setCursor (0,0);     lcd.print ("Set Mode");     pushlength = pushlengthset;     pushlength = getpushlength ();     if (pushlength != pushlengthset) {       return TimerMode;     }     lcd.setCursor (0,1);     knob.write(0);     delay (50);     knobval=knob.read();     if (knobval < -1) {       knobval = -1;     }     if (knobval > 1) {       knobval = 1;     }     TimerMode=TimerMode + knobval;     if (TimerMode < 0) {       TimerMode = 0;     }     if (TimerMode > 2) {       TimerMode=2;     }     if (TimerMode == 0) {     lcd.print("Off");     lcd.print(" ");     }     if (TimerMode == 1) {     lcd.print("On");     lcd.print(" ");     }     if (TimerMode == 2) {     lcd.print("Auto");     lcd.print(" ");     }     setmode (); } int CalcSun () { //Calculates the Sunrise and Sunset times     DateTime now = RTC.now();     sunTime[3] = now.day(); // Give Timelord the current date     sunTime[4] = now.month();     sunTime[5] = now.year();     myLord.SunRise(sunTime); // Computes Sun Rise.     Sunrise = sunTime[2] * 60 + sunTime[1]; // Sunrise returned in minutes past midnight     SunriseHour = sunTime[2];     SunriseMin = sunTime [1];     sunTime[3] = now.day(); // Uses the Time library to give Timelord the current date     sunTime[4] = now.month();     sunTime[5] = now.year();     myLord.SunSet(sunTime); // Computes Sun Set.     Sunset = sunTime[2] * 60 + sunTime[1]; // Sunset returned in minutes past midnight     SunsetHour = sunTime[2];     SunsetMin = sunTime [1]; } void ShortPush () {   //This displays the calculated sunrise and sunset times when the knob is pushed for a short time. for (long Counter = 0; Counter < 604 ; Counter ++) { //returns to the main loop if it's been run 604 times                                                      //(don't ask me why I've set 604,it seemed like a good number)   lcd.setCursor (0,0);   lcd.print ("Sunrise ");   lcd.print (SunriseHour);   lcd.print (":");   if (SunriseMin <10)      {      lcd.print("0");      }   lcd.print (SunriseMin);   lcd.setCursor (0,1);   lcd.print ("Sunset ");   lcd.print (SunsetHour);   lcd.print (":");     if (SunsetMin <10)      {      lcd.print("0");      }   lcd.print (SunsetMin);        //If the knob is pushed again, enter the mode set menu   pushlength = pushlengthset;   pushlength = getpushlength ();   if (pushlength != pushlengthset) {     lcd.clear ();     TimerMode = setmode ();   }    } }

What an amazing June 2023 release! Scrappy Boy Stamps released three new stamp sets.  Two are amazing heroes stamps sets: Heroes of the Universe and Champions and the third set is Cute Girls Camping. Available for all sets  are coordinating outline dies, coordinating stencils, paper packs, and pre-colored die cuts!  In addition, Scrappy Boy Stamps released two new mini album dies: 1) Suitcase Mini Album Die, and 2) Hiking Boot Mini Album Die. These dies can be used to create fun mini albums, cards, scrapbook pages, and party decorations.  Check out the Scrappy Boy webstore for all the goodies! I have two cards to share with you today. One card using multiple stamps from both heroes stamp set and the other card using Cute Girls Camping.  Listed below are the projects, Copic colors used, and supplies used. Project 1: There is a Hero in All of Us! Scrappy Boy Products used: Heroes of the Universe stamps & outline dies Champions stamps & outline dies Champions Comic Builder Stencil Champions Paper Pack Slimline Stitched Quilted Die Other products used: Copper colored cardstock for slimline card base Black cardstock for sentiment White embossing powder Copic markers used: Hero 1 Skin: E27, E25, E23, E13 Hair: C9, C7, C5, C3 Gold: E25, Y38, Y35, YR21 Black: C9, C7, C5, C3 Green: G28, G05, G03, G00 Silver: C5, C3, C1 Blue: B16, B14,B12 Hero 2 Black: C9, C7, C5, C3 White: C3, 0 Hero 3 Skin: E04, E11, E21, E00, E000 Cheeks: R20 Lips: R29, R24, R22 Hair: E18, E08, YR18, YR14 Yellow: YR27, YR24, YR21 Black: C9, C7,C5, C3 Hero 4 Skin: E04, E11, E21, E00 Cheeks: R20 Hair: C9, C7, C5, C3 Blue: B39, B37, B34, B32 Gray: N7, N5, N3, N1 Yellow: YR14 Hero 5 Gold: E23, Y35, YR21 Blue: BG05, BG02, BG01 Red: R39, R29, R24, R22 Project 2: Keepin' it Reel! Happy Birthday Scrappy Boy products used: Cute Girls Camping stamp & outline die Cute Girls Pre-colored die cuts (trailer and girl) I Love Camping Scene Builder Stencil Other products used: Distress Oxides in Tumbled Glass, Faded Jeans, Mowed Lawn, and Evergreen Bough A6 white cardstock Kraft cardstock Copic Markers used: Skin: E04, E11, E21, E00, E50 Hair: E13, E34, E11, YR20 Pink: N1, RV23, R02, RV00 Blue: B02, B00, B000 White: N3, N1, 0 Gray: N7, N5, N3 Brown: E44, E43, E42 This month's release is so amazing! Many stamps could be used to make masculine cards.  Thank you so much for stopping by. Have a creative day!

I am sharing a card using the Future Family stamp set from Scrappy Boy Stamps. I had a family member request a birthday card using the adorable images from this set and to make sure I included "the boss." This set was released in August 2021 and is one of my favorites from Scrappy Boy Stamps!  I first colored all the images with Copic markers, then I cut it out using the coordinated outline dies. I also stamped the sentiments at this time. Copic markers used: Father Skin: E13, E11, E21, E00, E000 Hair: E18, E08, R24, R22 White (Shirt): W5, W3, W1, W00 Turquoise (Pants): BG07, BG05, BG01 Mother Skin: E15, E13, E11, E21, E01, E000 Hair: E18, E08, YR18, YR14 Red: RV66, RV55, RV52 Purple: V95, V93, V91 White: W3, W1, W0 Robot Aqua: BG06, BG04, BG01, BG000 Blue: BG24, BG23, BG21 Black: T9, T7, T5, T3 White: T5, T3, T0, 0 Red: R29, R22 The Boss Skin: E13, E11, E21, E00, E000 Turquoise: BG07, BG05, BG01 Green: G09, G05, G02 Black: T7, T5, T3 I created the galaxy background by ink blending the following Distress Inks on watercolor paper: Squeezed Lemonade, Worn Lipstick, Seedless Preserves, Peacock Feathers, Blueprint Sketch, Chipped Sapphire, and Black Soot. I then used water to splatter some "stars." Then I used a white gel pen to create more darker stars. I masked off the top and bottom of the paper since I only wanted the galaxy in center of my card.  I used a die from Gina Marie Designs and cut out some geometric shapes from glitter cardstock I got from Jo-Anns. I used the same glitter paper to mat the card and the sentiment.  I adhered all the images using double-sided adhesive foam tape. To finish the card, I added a few rhinestones I had in my stash. Such a fun and cute card to make. I hope you give it a try! Thank you for stopping by and have a creative day!

Протокол питания при раке 👉 скачать БЕСПЛАТНО https://online.drberg.ru/protokol ИНТЕРВАЛЬНОЕ ГОЛОДАНИЕ. Бесплатное руководство ⏰ https://online.drberg.ru/if Рак: лечение, которое помогло полностью исцелиться от рака 4-ой стадии. Альтернативное лечение рака существует. Питание при раке особенное. Противораковые продукты должны быть в ежедневном рационе человека с онкологическим заболеванием. Длительное голодание, без которого не обойтись. Потому что голодание против рака – мощнейший инструмент. Но это еще не все. _____ Электролиты от Доктора Берга 💊 http://drberg.eu/produkciya/64-elektrolity-limonad-plyus.html?utm_source=youtube&utm_medium=opisanie&utm_campaign=video1304 Натуральные ВИТАМИНЫ D3+К2 💊 http://drberg.eu/produkciya/6-vitaminy-d3-k2.html?utm_source=youtube&utm_medium=opisanie&utm_campaign=video1304 Пищевые дрожжи (натуральный источник витаминов группы В) 💊 http://drberg.eu/produkciya/21-pisshevye-drozhzhi.html?utm_source=youtube&utm_medium=opisanie&utm_campaign=video1304 Читайте полезные статьи в блоге 📃 https://drberg.ru/blog КЕТО-МЕНЮ на 2 недели 👉 https://drberg.ru/menu Книга Доктора Берга 📗 https://drberg.ru/book Курсы Доктора Берга 🧑‍🎓 https://drberg.ru/dr-berg-courses Пройти ТЕСТ на ТИП ТЕЛОСЛОЖЕНИЯ ⚖️👉 https://test.drberg.ru/ Витамины и БАДы 💊 https://drberg.eu/ Кто такой Доктор Берг 👨‍⚕️ 👉 https://drberg.ru/o-doktore _____ ССЫЛКИ, которые упоминал Доктор Берг: 1) Исцеление от рака 4-ой стадии: история успеха. https://www.youtube.com/watch?v=A0t0puxpE6w 2) Результаты исследования рака готовы🙌 https://www.youtube.com/watch?v=a1gY7pZxg8M 3) Исследование про рак 👉 http://jscholaronline.com/full-text/JOCR/3_104/Inhibition-of-Scot-and-Ketolysis-Decreases.php 4) Книга Ги Таненбаума: https://www.amazon.com/MY-BATTLE-AGAINST-CANCER-Survivor-ebook/dp/B09GLBWBYY 5) Канал Ги Тененбаума на английском: https://youtube.com/c/SurviveFromCancer 6) Канал Ги Тененбаума на французском: https://youtube.com/c/CancerTherapy 0:00 - приветствие Ги Тененбаума; 1:10 - история рака Ги; 4:56 - длительное голодание против рака; 6:30 - блокировка SCOT; 9:18 - полное отсутствие раковых клеток; 10:21 - про научное исследование рака; 14:06 - какую пищу ел Ги; 18:26 - про удаление лимфоузлов. ‼️Поговорите с вашим лечащим врачом, прежде чем следовать нижеописанным советам. Интервью с Ги Тененбаумом – человеком, которому удалось полностью исцелиться от рака 4 стадии. Врачи говорили, что он умрет через 3 месяца. Сейчас у Ги нет опухоли и метастазов. Что делал Ги, чтобы добиться такого фантастического исцеления от рака? Первое – это голодание. Длительное голодание, которое помогло исцелиться от рака. Ги голодал до 45 дней! Он готов был на многое, чтобы выздороветь. Также Ги придерживался протокола питания, в котором были продукты, блокирующие ингибиторы SCOT. Ги ел много продуктов, которые убивают раковые клетки: брокколи, проростки брокколи, чеснок, лук. Чтобы не убивать нутриенты в этих продуктах, Ги ел их сырыми. В качестве источников белка были органические яйца, сардины, рыба, которая не провоцирует воспаление. Ги всегда следил за тем, чтобы есть больше омега-3 и меньше омега-6 жирных кислот. Невозможно выделить один фактор, который сделал всю работу. Вся информация указывает на то, что: → голодание – самый эффективный способ; → ингибиторы SCOT – самый перспективный способ; → продукты с противораковыми свойствами действуют с разных сторон. _____ Этот ролик в оригинале на английском 🇺🇸 - https://youtu.be/6JD_JzprK5U Опубликован 16 ноября 2022 года РЕКЛАМА на канале 📩 [email protected] ВКОНТАКТЕ https://vk.com/dr.berg ИНСТАГРАМ https://www.instagram.com/drberg.ru ТЕЛЕГРАМ https://t.me/drBerg ЯНДЕКС ДЗЕН https://zen.yandex.ru/drberg ❗️Этот видеоматериал представлен исключительно в информационных целях. Он не должен использоваться для самодиагностики или как замена медицинскому обследованию, диагностике, лечению, назначениям или рекомендациям врачей. Факт просмотра не устанавливает отношений «врач-пациент» между ...

" Alufelgen Sommerkompletträder OZ SUPERTURISMO AERO 8J x 18 5/108 ET 45 STAR GRAPHITE mit Sommerreifen 235/40R18 für Volvo C70 M Sommerkompletträder mit ABE 18 Zoll passend für Volvo C70, Typ M Sommerkompletträder mit OZ Alufelgen inkl. ABE (allgemeine Betriebserlaubnis): Sie montieren die Räder ohne jegliche Veränderung am Fahrzeug und eintragungsfrei. Renommierter Hersteller. 24 Monate gesetzliche Gewährleistung Persönliche und telefonische Beratung unseres Teams, auch nach dem Kauf OZ SUPERTURISMO AERO 8J x 18 5/108 ET 45 STAR GRAPHITE passend für folgende Fahrzeuge: Hersteller Typ Motorisierung KW / PS ccm Baujahr Volvo C70 Cabrio D3 110 / 150 1984 ab 2010/10 bis 2013/06 Volvo C70 Cabrio D4 130 / 177 1984 ab 2010/10 bis 2013/06 Volvo C70 Cabrio 2.4L 103 / 140 2435 ab 2006/03 bis 2009/10 Volvo C70 Cabrio 2.4i 125 / 170 2435 ab 2006/03 bis 2009/10 Volvo C70 Cabrio T5 162 / 220 2521 ab 2006/03 bis 2007/02 Volvo C70 Cabrio D5 132 / 180 2400 ab 2006/03 bis 2013/06 Volvo C70 Cabrio T5 169 / 230 2521 ab 2007/0 356596404371 https://i.ebayimg.com/images/g/NXoAAeSwbBtnuJa4/s-l1600.jpg https://www.ebay.de/itm/356596404371?norover=1&siteid=77&mkevt=1&mkcid=16&chn=psoc 2050.9 EUR 4x Sommerräder Oz Superturismo Aero Für Volvo C70 M Abe 18 Zoll Felgen 235 Auto & Motorrad > Teile > Autoteile & Zubehör > Autoreifen & Felgen > Kompletträder 008 new in stock Dicke Fußmatten - Qualität EXKLUSIV Kompatibel mit Seat Ibiza IV 5 Türen hatchback, 3 Türen Sport coupe 2008-2017 Fußmatten Schwarz mit 14 farbiger Kettelung  zur Auswahl Das dickste auf dem Markt erhältliche Material. - Die Ware ist neu und wird von uns selber Hergestellt. - Sehr dickes Material - Wasserdichtigkeit garantiert. - Die Unterseite ist Gummiert um ein Verrutschen der Matte zu verhindern. - Passgenau für Ihr Fahrzeug. Schreiben Sie uns, wir antworten auf JEDE Frage! 226458603201 https://i.ebayimg.com/images/g/FqcAAOSw4FtnPgVg/s-l1600.jpg https://www.ebay.de/itm/226458603201?norover=1&siteid=77&mkevt=1&mkcid=16&chn=psoc 71.0 EUR Dicke Autoteppiche, Fußmatten Schwarz Für Seat Ibiza Iv 5t H/b, 3t Coupe 2008-20 Auto & Motorrad > Teile > Autoteile & Zubehör > Innenausstattung > Fußmatten, Teppiche & Laderaumwannen 008 new Carmel in stock Navigation Shop Verkäuferprofil Bewertungen Shop speichern Kontakt Werkzeugakkus Ersatzteile Gartengeräte Staubsauger Notebook Motorkohlen Li-Ion Akku 18V / 2500mAh für Yard Force Rasenmäher Mähroboter wie Amiro 400 Technische Daten: Hochleistungs Li-Ion Akku, 18V / 2500mAh / 45Wh kann mit jedem Standard oder Originalnetzteil aufgeladen werden Überhitzungsschutz, Überladungsschutz und kurzschlusssicher kein Originalprodukt, 100% kompatibel zum Original-Akku kein Memoryeffekt dank Qualität und der neuesten Li-Ion Technologie Ersetzt folgende Akkutypen: Yard Force 1920726 GMBE-SP10283 GMBE-SP11571 baugleiche Passend für folgende Geräte: Yard Force Amiro 400 Amiro 400i Amiro 350 Amiro 350i Compact 280R Compact 400Ri Compact 400RiS EasyMow 260B und baugleiche Wissenswertes zu unseren Hochleistungs Li-Ion Akkus Unsere Akkus werden nach höchsten europäischen Qualitätsstandards hergestellt und garantieren eine maßgefertigte Passform. Die erstklassigen A-Grade Zellen gewährleisten eine sehr hohe Anzahl von Lade- und 356255407555 https://i.ebayimg.com/images/g/yucAAOSwrGxnNIJa/s-l1600.jpg https://www.ebay.de/itm/356255407555?norover=1&siteid=77&mkevt=1&mkcid=16&chn=psoc 56.9 EUR Li-ion Akku 18v / 2500mah Für Yard Force Rasenmäher Mähroboter Wie Amiro 400 Heimwerker > Werkzeuge > Elektrowerkzeug- & Druckluftgerät-Zubehör > Elektrowerkzeug-Akkus 008 new Tradeshop in stock Kontakt Zum Speicher-Shop Datenschutz Impressum Speicher-Hotline +49 9721 784678 Montag- Freitag: 9:00 - 12:00 und 13:00 - 17:00 Uhr Arbeitsspeicher für ... Dell Dell Workstation Dell Precision Notebook Dell Precision 7530 Speicher nicht gefunden? weitere Arbeitsspeicher anderer Hersteller ... Informationen Versand / Lieferzeiten Qualität Kontakt Rücksendung Impressum Dell Workstation Precision 7530 16GB RAM DDR4 passend für Dell Precision 7530 SO DIMM ECC 2666MHz Workstation- Beschreibung Arbeitsspeicher für Workstation Dell Precision 753016GB Arbeitsspeicher für den Dell Precision 7530. Das Speichermodul besitzt 260 Pin DIMM und eine Spannung von 1,2 Volt. Dieser Arbeitsspeicher wurde von uns für den Dell Precision 7530 geprüft. So ist sichergestellt, dass diese Speichererweiterung auch zusammen mit den bereits im Precision 7530 verwendeten Arbeitsspeichern eingesetzt werden kann. Information zur Speicherbestückung Welche Speicher können Sie einsetzen, wenn Sie einen Xeon E3 v5 oder einen Core i5/i7 Prozess 292677991467 https://i.ebayimg.com/images/g/cJUAAOSwsOZiSbKV/s-l1600.jpg https://www.ebay.de/itm/292677991467?norover=1&siteid=77&mkevt=1&mkcid=16&chn=psoc 109.18 EUR 16gb Ram Ddr4 Passend Für Dell Precision 7530 So Dimm Ecc 2666mhz Workstation- Computer, Tablets & Netzwerk > Computer-Komponenten & -Teile > Arbeitsspeicher (RAM) 007 new Elektronik > Elektronisches Zubehör > Computerkomponenten > Speichergeräte > Netzwerkspeichersysteme PHS-memory in stock MENU eBay Shop Bewertungsprofil Kontakt Über uns Artikelbeschreibung:   1 Stk. TYC 325-0160-1 Spiegelglas   Einbauposition: links  Außen-/Innenspiegel: konvex, beheizbar  Andere Kategorien:       Zahlungen: Versand: 266620988967 https://i.ebayimg.com/images/g/SyIAAOSw3QVlpqED/s-l1600.jpg https://www.ebay.de/itm/266620988967?norover=1&siteid=77&mkevt=1&mkcid=16&chn=psoc 30.09 EUR Spiegelglas Links Für Opel Oe 95183200 Auto & Motorrad > Teile > Autoteile & Zubehör > Karosserie-, Anbauteile & Zubehör > Außenspiegel & Teile 007 new TYC in stock BMW Drosselklappe A2C83004100 VDO  Es handelt sich um Demontageware von Neumotoren. Es können leichte Demontage und Lagerspuren vorhanden sein. Fahrzeug verwendungsliste muss nicht zwingend zutreffend sein,bitte Vergleichen sie unbedingt die Teilenummer A2C83004100  Hinweis Unsere Teile sind sichtbar und unsichtbar markiert und werden vor Versand fotografiert! Keine Rücknahme bei Beschädigung des Siegels oder fehlender Markierung. 284873220456 https://i.ebayimg.com/images/g/4ysAAOSwovRiuajK/s-l1600.jpg https://www.ebay.de/itm/284873220456?norover=1&siteid=77&mkevt=1&mkcid=16&chn=psoc 199.0 EUR Bmw Drosselklappe A2c83004100 Vdo Neu Auto & Motorrad > Teile > Autoteile & Zubehör > Luft- & Kraftstoffversorgung > Drosselklappen 007 new Fahrzeuge & Teile > Fahrzeugersatzteile & -zubehör > Kfz-Teile > Rahmen- & Karosserieteile VDO in stock AUTODOC Bremsanlage Luftfilter Ölfilter Innenraum-/Pollenfilter Federung Startseite Luftfilter PURFLUX A973 Luftfilter passend für PEUGEOT 106 II Schrägheck (1A, 1C) PURFLUX A973 Luftfilter passend für PEUGEOT 106 II Schrägheck (1A, 1C) Artikelnummer: A973 AUTODOC reference: 7851561 AUTODOC_Shop Produktbewertugen PURFLUX A973 Luftfilter passend für PEUGEOT 106 II Schrägheck (1A, 1C) Artikelnummer: A973 AUTODOC reference: 7851561 AUTODOC_Shop Produktbewertugen Austauschartikel (zzgl. 0 € Pfand / inkl. 19% MwSt) wird dem Kunden bei der Rücksendung des Altteils zurückerstattet Filterausführung:Filtereinsatz Höhe [mm]:163 Außendurchmesser [mm]:141 Innendurchmesser [mm]:119 Durchmesser 3 [mm]:103 Durchmesser 4 [mm]:81 Austauschartikel (zzgl. 0 € Pfand / inkl. 19% MwSt) wird dem Kunden bei der Rücksendung des Altteils zurückerstattet Gratis-versand auf diesen artikel in Deutschland 30 Tage Rückgaberecht Produkt Hersteller: PURFLUX Achtung! Hinweise Bitte beachten Sie, dass die abschließende Überprüfung der Kompatib 387247117582 https://i.ebayimg.com/images/g/cyAAAOSwFS5nfAN7/s-l1600.jpg https://www.ebay.de/itm/387247117582?norover=1&siteid=77&mkevt=1&mkcid=16&chn=psoc 13.3 EUR Purflux A973 Luftfilter Passend Für Peugeot 106 Ii Schrägheck (1a, 1c) Auto & Motorrad > Teile > Autoteile & Zubehör > Luft- & Kraftstoffversorgung > Luftfilter 008 new Purflux in stock Gravity, Geoid and Height Systems Proceedings of the IAG Symposium GGHS2012, October 9-12, 2012, Venice, Italy Taschenbuch von Urs Marti Details Redaktion: Urs Marti Herausgeber: Urs Marti EAN: 9783319385334 Einband: Kartoniert / Broschiert Inhalt: xii / 346 S. / 219 s/w Illustr. / 346 p. 219 illus. Ausstattung / Beilage: Paperback Auflage: Softcover reprint of the original 1st ed. 2014 Sprache: Englisch Seiten: 360 Reihe: International Association of Geodesy Symposia Maße: 279 x 210 x 19 mm Erschienen: 06.10.2016 Schlagworte: Geologie / Geophysik / Geowissenschaften / Geographische Informationssysteme / GIS / und Fernerkundung / Verstehen Beschreibung This volume inclu*es a selection of papers presented at the IAG international symposium "Gravity, Geoid and Height Systems 2012" (GGHS2012), which was organized by IAG Commission 2 ¿Gravity Field¿ with the assistance of the International Gravity Field Service (IGFS) and GGOS Theme 1 ¿Unified Global Height System¿. The book summarizes the latest results on gravi

Description TECHNICAL FIELD This invention relates to a method and apparatus for energy production and spacecraft propulsion from nuclear fusion reactions and in particular to a controlled nuclear fusion reactor relying on electrostatic and magnetic confinement. BACKGROUND ART Nuclear fusion takes place when light atomic nucleus with sufficient kinetic energy collides with each other to combine, overcoming electrostatic force repulsion, to form a heavier atomic nucleus releasing a tremendous amount of energy. Nuclear fusion reactions have an energy density many times greater than nuclear fission. The nuclear fission involving uranium-235 and plutonium-239 produce more radiation hazards and radioactive waste than the conventional neutronic nuclear fusion involving deuterium and tritium. Both release millions of times more energy than the chemical reactions. The development of a workable, self-sustaining, highly efficient and controlled nuclear fusion reactor for energy production has been tried for several decades. To date, no practical nuclear fusion reactor was able to, at the same time, confine and keep the reactants with enough kinetic energy until they fuse at expressive rates and, mainly, release more energy than they consume. Some reactors with different approaches have been tried: Tokamak, Levitated Dipole, Riggatron, Field-Reversed Configuration, Reversed Field Pinch, Magnetic Mirror Fusion Reactor, Spheromak, Laser Fusion, Z-machine, Focus Fusion, Farnsworth-Hirsch Fusor, Bussard Polywell, Muon-catalyzed Fusion, Heavy Ion Fusion, Magnetized Target Fusion, Colliding Plasma Toroid Fusion, Cold Fusion, Sonofusion, Pyroelectric Fusion and others. The most promising nuclear fusion reactor design currently being developed and tested is a Tokamak type called ITER (International Thermonuclear Experimental Reactor) which relies on toroidal magnetic field to confine usually a mix of deuterium and tritium. The Tokamak reactors are giants and require a considerable amount of energy, much more than it produces, to maintain the magnetic field and the reactants with enough kinetic energy to fuse. The toroidal magnetic fields confines efficiently in two dimensions, i.e. only radially, allowing plasma rotate longitudinally in a closed path generating loss by electromagnetic radiation (synchrotron radiation) decreasing the plasma kinetic energy lowering the probability of fusion reactions and generates a plasma instability problem due to centrifugal force of particles moving along the curved toroidal magnetic field. Thus, it is inefficient for now due to its technical feasibility, high investment costs and long development time. Most of that one skilled in the area states that, likely, it will not be available before 2050. The other types of reactor generate nuclear fusion at inexpressive rates (e.g., Cold Fusion) or consume more energy than they produce (e.g., Laser Fusion). Most of the conventional reactors, e.g. Tokamak, usually are designed to fuse a mix of deuterium and tritium, which gives off 80% of its energy in the form of fast neutrons making the apparatus relatively radioactive. The energy of fast neutrons is collected by converting their thermal energy to electric energy, which is very inefficient (less than 30%). The Field-Reversed Configuration or Magnetic Mirror Reactor have an unburned fuel leakage problem and the method of direct energy conversion to electricity (e.g.: U.S. Pat. Nos. 6,628,740, 6,664,740 and 6,888,907), although the best at moment, is relatively very complex and inefficient. The Farnsworth-Hirsch Fusor (U.S. Pat. Nos. 3,258,402, 3,386,883, 3,530,036, 3,530,497, 3,533,910, 3,655,508 and 3,664,920) take advantage of electrostatic acceleration consuming low energy to reach great kinetic energy about 170 KeV (2 billion ° C.) against 10 KeV (100 million ° C.) of Tokamaks which uses inefficient methods like ohmic heating. The Farnsworth-Hirsch Fusor, which relies on electrostatic fields for acceleration and confinement, has an unsolvable grid-loss problem, where injected ions form a positively charged cloud around the negative central grid obstructing the remaining of positive ions to reach full kinetic energy leading to a saturation of the reactor. The magnetic cusps is a common technology among some plasma confinement devices: Magnetic well for plasma confinement (U.S. Pat. No. 4,007,392), Multicusp plasma containment apparatus—Limpaecher (U.S. Pat. No. 4,233,537), Plasma confining device (U.S. Pat. No. 4,430,290), Bussard Polywell (U.S. Pat. No. 4,826,646) and others. The Bussard Polywell (U.S. Pat. No. 4,826,646) is similar to the Multicusp plasma containment apparatus—Limpaecher (U.S. Pat. No. 4,233,537) in injecting charged particles through magnetic cusps. The Bussard Polywell (U.S. Pat. No. 4,826,646—Oct. 29, 1985) wherein method steps, in summary, are generating magnetic cusps, injecting electrons through the magnetic cusps to create a negative potential, injecting positively charged particles toward the negative potential, and maintaining the number of electrons greater than the number of positively charged particles. The required excess of electrons leads to a saturation of the reactor limiting its energy production, also the excess of electrons causes excessive electromagnetic radiation (bremsstrahlung) lowering the kinetic energy of the plasma decreasing the nuclear fusion rate. In a summary, most of the current nuclear fusion reactor approaches have no technical feasibility; some of them are giant and expensive; most of them are relatively radioactive due of using exclusively deuterium-tritium as fuel; most of them consume more energy than it produces; some of them generate fusion at inexpressive rates; some of them are relatively very complex and inefficient; therefore, no practical solution and no foreseeable end in sight to a practical power plant for all of them at present moment. SUMMARY OF THE INVENTION The present invention was made in view of the prior art drawbacks described above, and the object of the present invention is to provide a workable method and apparatus to fuse charged particles releasing more energy than it consumes in a way to become self-sustainable. To solve the problem, the present invention provides an apparatus and method for confining and fusing charged particles. The charged particles comprise positive and negative ions from neutronic and aneutronic fuels. For confining radially the charged particles, at least two, preferably six, magnetic fields to form a cusp region for a continuous injection of charged particles. An electric field (first electric potential) at the cusp region for accelerating the charged particles during the injection, and an opposite electric field (second electric potential) for trapping longitudinally the charged particles allowing only charged products to escape. The charged products are worthwhile for spacecraft propulsion and direct electricity conversion. The electric field (second electric potential) acts as an electrostatic lens focusing (converging) the particles as they approach to it. The magnet, preferably comprised by independent winding groups, act as a set of magnetic lens achieving a best focal length. At the magnetic cusp region, the charged particles are confined by the magnetic reconnection phenomenon, and the continuous injection becomes the confinement more efficient yet. The electrostatic acceleration method can reach great kinetic energy, about 600 KeV (7 billion ° C.), at low energy consumption. The preferred embodiment achieves a true three-dimensional confinement plus a three-dimensional charged particles injection giving a higher probability of fusion reactions. Further comprising an elementary resonance method for increasing the fusion rate, a high efficient direct electricity conversion by neutralization process, and a system for recycling magnets bore heat energy for generating electricity, becoming self-sustaining. OBJECTS AND ADVANTAGES Accordingly, it is an object of this invention to provide a method and apparatus for fusing charged particles releasing more energy than it consumes becoming self-sustaining. It is a further object of this invention to provide a method and apparatus for confining radially charged particles in magnetic fields and trapping them longitudinally in electrostatic fields, allowing or not the charged products of nuclear fusion escape longitudinally overcoming the electrostatic fields, thereby represents a true three-dimensional confinement with an adequate escape mechanism. It is still another object of this invention to provide a method or apparatus for fusing either positive ions or negative ions allowing a choice between reducing bremsstrahlung radiation and increasing energy production. It is another object of this invention to provide a method for accelerating ions in an electrostatic way to reach great kinetic energy at inexpressive energy consumption. It is another object of this invention to provide a preferred embodiment comprised by six magnets representing the true three-dimensional confinement plus a three-dimensional ion injection, and a basic embodiment comprised by two magnets representing the true three-dimensional confinement plus a bi-dimensional ion injection. It is another object of this invention to provide a method and apparatus for converting energy of charged products from aneutronic nuclear fusion directly to electricity with efficiency exceeding 95%. It is another object of this invention to provide a method and apparatus for focusing the charged particles by a set of built-ins magnetic lens increasing fusion rate. It is another object of this invention to provide an elementary resonance method for increasing fusion rates by oscillations on magnetic flux transferring energy radially to plasma and by oscillations on confinement electric voltage transferring energy longitudinally to plasma, the elementary resonance plus the escape mechanism and keeping plasma in a quasi-neutral state solve the saturation problem. It is another object of this invention to provide a method and apparatus allowing a multidirectional energy flow which can, for example, be used to recycle energy stored in magnets back to a battery bank. It is another object of this invention to provide a method and apparatus for bending exhausting charged products from nuclear fusion which will be useful for spacecraft propulsion. It is another object of this invention to provide a method and apparatus for cooling the magnets and recycling its heat energy for electric energy generation using a steam turbine, a coolant, a condenser, a heat sink, a pump and an electrical generator. It is another object of this invention that the method and apparatus are able to fuse aneutronic fuels, in special boron hydrides and helium-3, which represents low radiation hazards and efficient conversion of their charged products to electricity. It is another object of this invention to provide a workable nuclear power plant suitable for a feasible spacecraft. It is another object of this invention to provide consistent calculations to consolidate its technical feasibly. It is another object of this invention to provide an example of bore coating capable to reflect back to plasma most of the electromagnetic radiation (bremsstrahlung) recycling its energy and increasing the fusion rate and keeping low the bore temperature. These and other objects and features of the invention will become apparent from the following description in connection with the appended drawings illustrating preferred embodiment of the invention. It is to be understood, however, that these are given by way of illustration and not of limitation and that changes may be made in the detailed construction, materials, form and size of the parts, without affecting the scope of the invention. DRAWINGS FIGURES FIG. 1 is an illustration of a basic embodiment comprised of two magnets, core electrical insulators and a circular ion injection belt; FIG. 2 is an illustration of a preferred embodiment comprised of six magnets, core electrical insulators and an arc-shaped ion injection belt; FIG. 3 is a cross-section taken of one the magnets of FIG. 2 to clarity the injection openings and the preferred windings; FIG. 4 is an illustration of the preferred embodiment of FIG. 2 further including an armature, magnet bending, output insulator, with a partially exploded view to clarify the assembly; FIG. 5 is an illustration of the preferred embodiment of FIG. 4 further including a fuel reservoir and a base; FIG. 6 is an illustration of the preferred embodiment of FIG. 5 hiding magnet bending, insulators in order to show an electrical transformer, battery bank, a heat exchanger and a vacuum system; FIG. 7 is an illustration of the electrical transformer having a multidirectional energy flow; FIG. 8 is an illustration of the heat exchange system used for recycling heat energy from magnets; FIGS. 9A and 9B is an illustration of an exploded assembly view of the preferred embodiment; FIG. 10 is an illustration of a spacecraft comprised by the base, landing pads, hull, MPD thruster and output covering; FIG. 11 is an illustration of the alternative embodiment of FIG. 1 further including an armature, output electrical insulators and output covering; FIG. 12 is an illustration of the alternative embodiment of FIG. 11 further including a fuel reservoir and a base; FIG. 13 is an illustration of an electronic schematic diagram used in explaining the multidirectional energy flow and the electricity conversion. REFERENCE NUMERALS IN DRAWINGS 1 magnet 2 magnet 3 circular injector belt 4 ion injector 5 core insulator 6 core insulator 7 bolt 8 cold coolant inlet 9 magnet 10 core insulator 11 bolt 12 arc-shaped injector belt 13 cold coolant inlet 14 hot coolant outlet 15 winding groups 16 injector openings 17 magnet bore 20 armature 21 hot coolant pipe 22 bolts 23 magnet bending 24 cold coolant pipe 25 neutralizer top 26 output insulator 27 deflector 28 neutralizer middle 29 neutralizer bottom 30 neutralizer top 31 optical fiber 32 neutralizer bottom 33 magnet bending 34 output insulator 35 optical fiber 36 electrical transformer 37 vacuum pump 38 fuel reservoir 39 base 40 air breathing 41 landing pad 42 battery bank 43 steam turbine 44 output covering 45 low voltage power supply 46 acceleration power supply 47 confinement power supply 48 cold coolant pipe 49 hot coolant pipe 50 electrical generator 51 condenser 52 cold pipes branching 53 hot pipes merging 54 MPD thruster 55 spacecraft hull 56 air breathing 57 exhaust output 60 extra insulator 61 output insulator 62 extra confinement 63 armature 64 neutralizer top 65 neutralizer middle 66 neutralizer bottom 67 output covering 68 deflector 69 electrical transformer 70 steam turbine 71 base 72 air breathing 73 landing pad 74 ground wire 80 optical fiber 81 control system DESCRIPTION OF INVENTION In the following will be described at least two different practical workable embodiments of this invention. Preferred Embodiment A preferred embodiment, comprised by six magnets, is shown in FIG. 2, however, for a better understanding, a basic embodiment, comprised by two magnets, is shown in FIG. 1, in where is illustrated a magnet 1 and a magnet 2 joined forming an angle of 180° between each other, and a circular ion injector belt 3 with the output of its ion injectors 4 between the intersection (region of magnetic cusps). The circular injector belt 3 is comprised by twenty ion injector 4 disposed concentrically and equally spaced around the intersection of the magnets. An electrical insulator 5 is attached to magnet 1 and an electrical insulator 6 is attached to magnet 2, both by four bolts each one (see bolt 7). The ideal structure is illustrated in FIG. 2 in where there are six magnets, each one similar to magnet 9, joined forming angles of 90° at adjacencies, and an arc-shaped injector belt 12 with the output of its ion injector between the intersections (region of magnetic cusps). The arc-shaped injector belt 12 is comprised by twelve arcs of arccos (⅓)≈70.52878°, and by sixty eight ion injectors disposed concentrically and equally spaced around the intersection of the magnets. An electrical insulator 10 is attached to magnet 9 by four bolts (see bolt 11), similarly to others set of magnet and electrical insulator. A cold coolant inlet 8 (FIG. 1), a cold coolant inlet 13 and a hot coolant outlet 14 belongs to a heat exchange system and will be further explained. The intersection of two or more magnets bore forms the reactor chamber. In the ion injector 4, several types of ion sources can be used (e.g., RF ion source due to its long life), however, it is preferably a duoplasmatron ion source having a low beam angle dispersion in order to produce either positive or negative ions in a well focused beam. A measurement of electron current between the ion source and the ground electric potential (common electric potential), using a conventional ammeter plus a fuel flow meter, can be used to determine specific ionization of the plasma. The output of the ion injector is comprised by an electrical insulated material preferably boron nitride. In case of using solid fuels, like decaborane (200° C.), then a pre-heating mechanism must be provided for heating the fuel until it vaporizes. Both the circular injector belt 3 and arc-shaped injector belt 12 can have its ion injectors as described above. The magnet coils can be wound as a conventional magnet in a single multilayer winding of enameled copper wire, however, FIG. 3 illustrates a cross-section taken of magnet 9 to clarity a preferred winding 15 in where is comprised by multiple flat pancake coils (sixteen as illustration) coaxially disposed along the longitudinal axis of the magnet. The flat pancake coils are grouped, preferably in four groups, having each group an independent electrical current source in order to be acting as an independent magnetic lens. A superconducting magnet winding is preferably, typically niobium-titanium (e.g., multifilamentary NbTi copper in epoxy), niobium-tin or copper oxide ceramics (e.g., YBCO, TBCCO, HgBCCO, BSCCO), cooled below a critical temperature by liquid helium, performing a magnetic flux of 4.5 Tesla or better, at low power consumption. A magnet bore 17 is preferably coated with a hard and dense metal alloy, tungsten or depleted uranium covered by a layer of a dielectric material like silicon dioxide or titanium dioxide, in order to reflect electromagnetic radiation keeping low the bore temperature, and more preferably that the coating be done in an electrical insulated annular way or using a powder compound of the metal alloy in order to keep an electrical insulation along the longitudinal axis of the magnet, thereby a voltage produced by inductive reactance of the pancake coils, due to an electrical current variation, can be transferred axially to plasma. Magnet 1 can be done in some way as magnet 9, only differing on openings 16 for the ion injectors and shape of the intersections. The magnets intersection (region of magnetic cusps) is where an acceleration electric potential (first electric potential) is applied. A continuation of the preferred embodiment of FIG. 2 is shown in FIG. 4, further illustrating a partial assembly view (lines of mounting shown as dashed lines) in where the magnet 9 is connected to the electrical insulator 10 by bolts 11. A magnet bending 23 fastened by bolts 22 to an armature 20, fixing the insulator 10 by pressing it inward the armature. The armature, preferably a metal alloy like titanium or stainless steel, sustains the six magnets and its respective electrical insulators, and the magnets are pressed to sustain each other at the intersection region. The assembly described above is repeated, equally spaced at an angle of 120° to the others magnet bending top 23 and as well to a magnet bending bottom 33 equally spaced at angle of 120° to the others magnet bending bottom, where magnet bending top and magnet bending bottom are in an angle of 60°. The armature 20 keeps the reactor components together, providing support to magnets, insulators, ion injector belt 12 and bending magnets. The armature is where a confinement electric potential (second electric potential) is applied. The magnet bending is useful to bend the exhausting products of nuclear fusion, the magnet bending top 23 has a bending angle of (90°+(arccos (⅓)/2))≈125.26439°, and the magnet bending bottom 33 has a bending angle of (90°−(arccos (⅓)/2))≈54.73561°. The magnet bending coils can be a single multilayer superconducting magnet winding, much simpler than aforesaid for magnet 9. Continuing with the embodiment shown in FIG. 4 in where each magnet bending top 23 is connected to an output electrical insulator 26, as well each magnet bending bottom 33 is connected to an output electrical insulator 34. An electrostatic deflector 27 comprised by three plates disposed around the output electrical insulator 26 is to deflect the charged products in order to align its trajectory giving some steering. A hot coolant pipe 21 belongs to a heat exchange system and will be further explained. The neutralizers 25, 28, 29, and 32 are electrons guns and duoplasmatron ion sources used for electricity conversion by neutralization process and will be further explained. An optical fiber top 35, as well an optical fiber bottom 31, is to control and monitor the neutralizers and other components of the reactor which are at different electric potential, thereby optical fiber is preferably due to its high electrical insulation and immunity to an electromagnetic interference. The electrical insulators for the present invention can be made from several materials types like polytetrafluoroethylene (60MV/m), acrylic glass, ceramic, porcelain, nylon (14 MV/m), polyester, polystyrene (24MV/m), neoprene rubber (12MV/m), but the two recommended is boron nitride due to its excellent thermal properties and a dielectric strength of 6MV/m, and the polycarbonate due to its physics properties and dielectric strength of 15MV/m. A continuation of the preferred embodiment of FIG. 4 is shown in FIG. 5, further illustrating a fuel reservoir 38, preferably made of graphite-epoxy or carbon fiber reinforced plastic. An electrical transformer 36, and below that a vacuum pump 37, preferably an oil diffusion pump or better, to keep the whole reactor system, preferably including electric and electronic components, in a very low pressure of 10−6 Torr or lower, in order to provide a high electrical insulation of a dielectric strength of 1GV/m, meaning an optimum short circuit preventing. A base 39 is preferably an aluminum alloy to act as a heat sink. The output electrical insulators 26, 34 and so forth are fixed on the base. An air breathing 40 and a landing pad 41 are parts of a spacecraft and will be further described. A continuation of the preferred embodiment of FIG. 5 is shown in FIG. 6, hiding the magnet bending, output insulators and so on, for illustrating electrical transformer 36, and below that the vacuum pump 37, and further illustrating a battery bank 42, preferably comprising a hydrogen fuel cell. A heat exchange system 43 and a cold coolant pipe 24. An output covering 44 and an exhaust output 57 will be further described. The electrical transformer 36 is illustrated in FIG. 7, better illustrating a low voltage power supply 45 of about 250 Volts, an acceleration power supply 46 (first electric potential), and a confinement power supply 47 (second electric potential). The power supplies have a custom bidirectional switching-mode full bridge mosfet technology. The electrical transformer windings no overlap each other, primary and secondary windings are defined dynamically allowing a multidirectional energy flow as will be further described. The heat exchange system is illustrated in FIG. 8, in where a coolant, preferably liquid helium due to its low tendency to absorb neutrons, circulates towards a branching 52 by a pipe 48, then towards a magnet coolant inlet 13 (FIG. 2) by a pipe 24 (FIG. 6). The heated coolant circulates from a magnet coolant outlet 14 (FIG. 2) towards a merging 53 by a pipe 21 (FIG. 4), then to a steam turbine 43 by a pipe 49, and then to a conventional internal serpentine of a condenser 51. The steam turbine rotates and transfers its mechanical energy to an electrical generator 50 recycling the heat excess to electricity. The condenser 51 transfers the remaining heat excess to the base 39 (FIG. 6) which is acting as a heat sink. A condenser internal pump circulates the coolant from the serpentines toward the pipe 48 continuing the cycle. The liquid helium, for superconducting magnet requirements, must be cooled down to temperatures of approximately 4.2 Kelvin. A continuation of the preferred embodiment of FIG. 2 is shown in FIG. 9A and an exploded assembly view is shown in FIG. 9B (lines of mounting shown as dashed lines), illustrating arc-shaped injector belt 12 and armature 20, in order to clarify the assembly of the set of magnet 9, electrical core insulator 10, one of the bolts 11, the openings 16 for the ion injectors, cold coolant inlet 13 and hot coolant outlet 14. The six magnet assemblies will sustain each other concentrically to the arc-shaped injector belt by being pressed against the armature by the magnets bending already described in FIG. 4. The magnets intersection (region of magnetic cusps) is where the acceleration electric potential (first electric potential) is applied. The armature 20 is where the confinement electric potential (second electric potential) is applied. The ion injectors exchange its electrons with the ground electric potential (common electric potential) to ionize the nuclear fusion fuel. A spacecraft (weigh: 500000 Kg, height: 22 m, diameter: 15 m) using the preferred embodiment of FIG. 5 as power plant is shown in FIG. 10, in where three landing pads 41 are equally spaced at an angle of 120° to sustain the base 39 which sustain a hull 55, preferably made of an aluminum alloy of at least 10 cm of thickness to protect against outer space radiation. Three electric thrusters 54, preferably a magnetoplasmadynamic (MPD) thruster, positioned near the center of mass of the spacecraft or a little above and disposed around the hull equally spaced at an angle of 120°. The electric thruster is preferably moveable around its axis in order to give some steering for stabilization during the launching, re-entry and landing, and some maneuverability in the space. The MPD thrusters must operate during short periods due to its low lifetime. To keep the spacecraft aligned straight ahead for a long time is used the electrostatic deflector 27 as already described in FIG. 4. A six output covering 44 is to cover the six exhaust output 57 during startup of the reactor in order to maintain the vacuum, after the reactor startup, all six outputs covering open letting the products of nuclear reaction, already neutralized by neutralizers, thrust the spacecraft. An air breathing 40, 56, there are six disposed equally spaced around the base at angle of 60°, is to increase the reaction mass when the spacecraft is in an atmospheric environment doing the products of the nuclear reaction heat incoming atmospheric gases expanding it to give more thrusting for the spacecraft. The landing pads 41 are preferably moveable or retractile in order to reduce the aerodynamic drag. Alternative Embodiment A continuation of the basic or alternative embodiment of FIG. 1 is shown in FIG. 11, further illustrating an armature 63 which keeps the reactor components together, providing support to core insulator 5 and 6, magnet 1 and 2, circular ion injector belt 3. The magnets intersection (region of magnetic cusps) is where the acceleration electric potential (first electric potential) is applied. The armature is where a confinement electric potential (second electric potential) is applied. An extra confinement insulator 60 and a disc 62 are for applying an extra confinement electric potential in order to confine both reactants and products of the nuclear fusion reaction at the top end. The products can only escape at bottom end passing by output insulator 61. An electrostatic deflector 68 comprised by three plates disposed around the output electrical insulator 61 is to deflect the charged products to align its trajectory. The neutralizers 64, 65 and 66 are electrons guns and duoplasmatron ion source used for electricity conversion by neutralization process. An output covering 67 is to cover the exhaust output during startup of the reactor in order to maintain the vacuum. Most of the components are similar to that already cited in FIG. 4, except that there is only one output. A continuation of the alternative embodiment of FIG. 11 is shown in FIG. 12, further illustrating a fuel reservoir 68 similar to that previously described in FIG. 5. A base 71 is preferably an aluminum alloy to act as a heat sink. An electrical transformer 69 similar to that previously described in FIG. 7 except that there are an extra electrical voltage for apply an electric potential at disc 62 providing the extra confinement in one of the ends. A heat exchange system 70 similar to that previously described in FIG. 8, an air breathing 72 and a landing pad 73 are similar to that previously described in FIG. 10. A ground wire 74 (common electric potential) for the ion injectors exchange its electrons for ionizing the nuclear fusion fuel. Most of the components are similar to that already cited for the preferred embodiment. Operation of Invention A basic operation can be better understood from the FIG. 1 in where magnet 1 and magnet 2 generates a magnetic field of same polarity, preferably south, at the intersection between them forming magnetic cusps. The acceleration electric potential (first electric potential) is applied at the region of magnetic cusps. The confinement electric potential (second electric potential), of opposite polarity to the first, is applied to armature 63 (FIG. 11) generating electric fields. The electrical insulators 5 and 6 provide an electrical gap between the armature and the magnets. For trapping positively charged particles (positive ions) the acceleration electric potential (first electric potential) must have a negative voltage, and the confinement electric potential (second electric potential) must have a positive voltage. Otherwise, for trapping negatively charged particles (negative ions) the acceleration electric potential (first electric potential) must have a positive voltage, and the confinement electric potential (second electric potential) must have a negative voltage. The confinement electric potential can be adjusted for trapping only the reactants allowing the charged products of the nuclear fusion to escape longitudinally overcoming the confinement electric potential. The ion injectors 4 of the circular injector belt 3, ionizes a nuclear fusion fuel exchanging electrons with the ground electric potential (common electric potential), and the ionized fuel, that is charged particles or ions, is accelerated in a electrostatic way towards the intersection (region of magnetic cusps) reaching the interior of the magnets after passing through the region of magnetic cusps. The charged particles become confined radially by magnetic fields and trapped longitudinally along the axis of the magnets by the electric fields generated by the first and second electric potentials. The armature electric fields, of same polarity of the charged particles, act as an electrostatic lens focusing (converging) the particles as they approach to it and defocusing (diverging) them as they move away from it. The magnetic fields act as a magnetic lens focusing (converging) the charged particles. If the magnets are similar as the previously described in FIG. 3, comprising of a set of independent winding groups, then each group can have its electric current varied independently from the others in order to change the magnetic flux shaping the magnetic field to achieve a best focal length increasing the fusion rate. The charged particles move longitudinally describing a circular and helical orbit around the magnetic field lines keeping away from the magnet walls. At the region of the magnetic cusps, the magnetic field lines are curved forcing the charged particles to describe a more elliptical and eccentric orbit increasing electrostatic pressure at the region of the magnetic cusps creating a great difficulty to them to escape overcoming this region (magnetic reconnection phenomenon), and the continuous injection of the charged particles by the ion injector belt become it more difficult yet. The charged particles are confined radially by magnetic fields and trapped longitudinally by first and second electric field in the interior of the magnetic fields and confined by magnetic cusp by magnetic reconnection phenomenon, until the charged particles fuse and their charged products may escape longitudinally overcoming the second electric field. Thereby represents a true three-dimensional confinement with an adequate escape mechanism. Inducing variations preferably by pulses on electrical current of the magnets results in oscillations on magnetic flux transferring radially energy to plasma (pinch effect) increasing the fusion rate. If the magnets are similar as the previously described in FIG. 3, coated with a hard and dense metal alloy, tungsten or depleted uranium, then most of the electromagnetic radiation (bremsstrahlung) can be reflected back to the plasma recycling its energy increasing the fusion rate. If the coating is done in an electrical insulated annular way or using a powder compound of the metal alloy in order to keep an electrical insulation along the longitudinal axis of the magnet, and if the magnet windings are comprised by multiple flat pancake coils (FIG. 3), then a voltage produced by inductive reactance of the pancake coils, producing an alternating electric field in the bore due to an electrical current variation, can be transferred axially to the plasma increasing a little more the fusion rate. Inducing oscillations on electric voltage of the first or second potentials, preferably both, most of the energy of the electric oscillations will be transferred longitudinally to the charged particles increasing the fusion rate. The oscillations described above can be comprised by a modulation and multiplexing of frequencies: a cyclotron rotation at frequency ω+, a magnetron rotation at frequency ω−, and an axial “trapping” oscillation at frequency ωz. The higher frequency is the cyclotron that can be estimated f=qB/(2πm), and the others is by measuring energy production and adjusting the oscillations to reach a maximum synchronization of phase and frequency with the plasma resulting in an increase of the fusion rate. For that, can be a conventional RF generator via a pulse transformer connected in series with the power supplies. Adjusting and measuring the energy production is a simple way to determine the frequencies and can be understood as an elementary resonance method. An excess of electric charge in the reactor chamber can lead to a saturation wasting fuel and reducing the energy production, however, using oscillations for increasing the fusion rate will decrease the electric charge in the reactor chamber allowing injection of more of the charged particles increasing the energy production. Thoughtfulness about the preferable polarity of the magnetic fields at the intersection between the magnets forming the magnetic cusps region: an electric current on magnet windings develops an electric voltage on its terminals due to resistivity, and a pulse, positive or negative, on electric current develop an electric voltage on its terminals due to inductive reactance. The electric voltage due to resistivity can be too little to take some advantage. Thus the magnetic south polarity is only a predilection, but could be magnetic north polarity if desirable. The most efficient method of transferring kinetic energy to the charged particles is by electrostatic acceleration, doing this from a ground potential (common electric potential) and allowing the charged particles fall to the acceleration electric potential (first electric potential) exchanging its potential energy to kinetic energy, represents great kinetic energy at low energy consumption (P=V×I; V=0→P=0). A measurement of electron current between the ion source and the ground electric potential can be used to determine specific ionization of the plasma. A duoplasmatron is one of the ion sources that can be used in the ion injector 4, and its advantage is to produce either positive or negative ions. For ionizing the nuclear fusion fuels to the positively charged particles is by extracting electrons from them and sending electrons to the common electric potential, otherwise for ionizing to the negatively charged particles is by extracting electrons from the common electric potential and adding the electrons to the nuclear fusion fuel. Fusing positively charged particles represents a normal energy production and low bremsstrahlung radiation, otherwise fusing negatively charged particles represents a high energy production and high bremsstrahlung radiation, however, for a highest energy production, the specific ionization must keep as low as possible, that is the plasma charged particles must be a quasi-neutral plasma resulting in a high density, which implies in a higher magnetic flux and a higher acceleration and confinement voltage, as will be further understood by calculations. The nuclear fusion fuel can be composed of light atomic nucleus like hydrogen, deuterium, tritium, helium, lithium, beryllium, boron, and their various isotopes. Some isotopes like hydrogen-1, helium-3, lithium-6, lithium-7 and boron-11 are the interest for aneutronic nuclear fusion (low neutron production), in special boron hydrides and helium-3. The fuel specific energy and specific ionization are essential for dimensioning the magnet bore, magnetic flux and electric voltages, as will be further understood by calculations. The injector belt 3 of the basic embodiment (FIG. 1) injects the charged particles only in radial ways, representing a bi-dimensional ion injection plus the true three-dimensional confinement. The injector belt 12 of the preferred embodiment (FIG. 2) injects the charged particles in three orthogonal axes, representing a three-dimensional ion injection plus the true three-dimensional confinement, having higher probability of fusing atomic nucleus. The six magnet bending 23 and 33 is useful to bend the exhausting products of the nuclear fusion, as previously described for the preferred embodiment in FIG. 4. The alternative embodiment (FIG. 11), comprised by two magnets, dispense the magnet bending, but require an extra confinement potential in order for the exhausting charged products escape through only one of its ends, however, it increases the probability of secondary reactions. The preferred embodiment (FIG. 4) can have its three magnet bending top 23 suppressed and applied an extra confinement electric potential, then the charged products can only escape by its others three magnet bending 33, this can simplify the assembly but increase the secondary fusion reactions meaning more radiation hazards. Thus, more output for the charged products will result less the undesirable secondary fusion reactions. The base 39 (FIG. 5), as well 71 (FIG. 12), is connected to the ground electric potential (common electric potential). The output electrical insulators 26 and 34 (FIG. 5), as well 61 (FIG. 11), is to provide an electrical insulation between the armature and the base. Surrounding the outputs there are the electrostatic deflector plates 27 (FIG. 5), as well 68 (FIG. 11), to deflect the charged products in order to align its trajectory giving some steering. The neutralization is essential to prevent that the charged products, after passing through the outputs, turn around and collide back eroding the base and others components, for that, the sum of the electron current of the neutralizers 25, 28, 29, 30, 32 and so forth (FIG. 5) must be equaled to the sum of the electron current of the ion injector belt 12 (FIG. 2). This rule must be applied for the neutralizers 64, 65, 66 and so forth (FIG. 11) and the circular injector belt 3. The electricity conversion by neutralization process will be further explained. A special power supply system is required to generate voltages for the acceleration electric potential (first electric potential), the confinement electric potential (second electric potential), and for the other components of the nuclear fusion reactor. Its main feature is to allow a multidirectional energy flow used to recycle energy stored in magnets (E=½LI2) and capacitors (E=½CV2) back to a battery bank or to the others power supplies. A continuation of the FIG. 7 is illustrated as an electronic schematic diagram in FIG. 13 to clarity the multidirectional energy flow, in where the battery bank 42 and a capacitor C1 has electric energy stored, circuit CI1 switches between on and off states the MOSFET transistors T1 and T4, T2 and T3, alternating the electric current to the electrical transformer 36. The diode bridge, comprised by diodes D5 and D8, D6 and D7, convert the alternating electric current from transformer 36 to direct current to supply a capacitor C2 storing the energy in it. This process is well known in a conventional switching-mode power supply having a full bridge technology using either MOSFET or IGBT transistors. The energy stored in capacitor C2 can be sent back to battery bank 42 and capacitor C1 if circuit C12 switches between on and off states the MOSFET transistors T5 and T8, T6 and T7, alternating the electric current to the electrical transformer 36, and the diode bridge, comprised by diodes D1 and D4, D3 and D2, convert the alternating electric current from transformer 36 to direct current to supply battery bank 42 and capacitor C1 restoring the energy to it. The power supplies 45 and 46 have a bidirectional energy flow between them, the transformer 36 have others power supplies attained to it, and, with a suitable control, perform the multidirectional energy flow. To invert the output polarity of the power supply 46, worthwhile for confining and fusing either positively or negatively charged particles from a duoplasmatron ion source, a circuit CI3 switch on the relays K2 and K3, and switch off the relays K1 and K4, then the terminal V1 have a positive voltage relative to V2, otherwise will have a negative voltage. To achieve high voltages for acceleration and confinement potentials, several power supplies, similarly as described above, must be connected in series from the ground electric potential (common electric potential). Some power supplies have a high electric voltage between them (millions Volts). For that, and to control and monitor the whole system, an optical fiber 80 is the most recommended due to its high electrical insulation and immunity to an electromagnetic interference. The control system 81 controls and monitors the power supplies and other reactor components via the optical fiber 80, as well 31 and 35 (FIG. 4), using a semi-duplex protocol. Before explaining the electricity conversion from the charged products, is useful to remember some physics electric concepts: extracting electrons from a positive terminal of a charged capacitor will increase its voltage and consequently increase its stored energy (E=½CV2), otherwise extracting electrons from a negative terminal of the charged capacitor will decrease its voltage and consequently decrease its stored energy. Another way to think is allowing electrons towards to the positive terminal of the charged capacitor will decrease its voltage and consequently decrease its stored energy (E=½CV2), otherwise pushing electrons towards to the negative terminal of the charged capacitor will increase its voltage and consequently increase its stored energy. The method of converting kinetic energy from charged products in electricity is by neutralization process, where neutralizer particles comprise either electrons or positive ions. If the products of the nuclear fusion reaction are positively charged then the positive confinement electric potential forces the positively charged products to exchange its kinetic energy to potential energy, and the positively charged products attract easily electrons from the neutralizer 25 (FIG. 4) which is at the positive confinement electric potential. The electron extraction from the positive potential will increase the voltage of the capacitor C2 of the switching-mode power supply (similar to FIG. 13). The charged products lose kinetic energy and will not reach full acceleration to the ground electric potential after being neutralized. The circuit CI2 can send the energy received from the charged products to the transformer 36 allowing the flow of electrons from its ground to reduce the positive voltage, for that must switch its transistors, as previously described in FIG. 13, sending excess of energy to the electrical transformer, and the power supply 45 can receive the energy by its diode bridge and then supply the battery bank 42 or other power supply. The whole process is controlled, in a synchronized mode, by the control system 81. The received electric power is calculated by formula: P=V×I, that is, the electric potential versus flow of electrons equals to the energy flow received from the charged products. Otherwise, if the products of the nuclear fusion reaction are negatively charged then the negative confinement electric potential forces the negatively charged products to exchange its kinetic energy to potential energy, and the negatively charged products attract easily positive ions from the neutralizer 25 (FIG. 4), preferably a duoplasmatron, which is at the negative confinement electric potential. The neutralizer electrons pushed towards to the negative potential will increase the voltage of the capacitor C2 of the switching-mode power supply (similar to FIG. 13). The charged products lose kinetic energy and will not reach full acceleration to the ground electric potential after being neutralized. The energy stored in the capacitor C2 can be sent to others power supplies as previously described. The method of transferring electric energy to increase the kinetic energy of the charged products is also by ion neutralization. This method is useful for spacecraft propulsion purposes like stabilization. If the products of the nuclear fusion reaction are positively charged then a negative electric potential, can be applied to the deflector 27 (FIG. 4), increasing the kinetic energy of the positively charged products, and the positively charged products attract easily electrons from the neutralizer 28 (FIG. 4) which is at the negative electric potential. The electron extraction from the negative potential will decrease the voltage of the capacitor C2 of the switching-mode power supply (similar to FIG. 13). The charged products gain more kinetic energy reaching an extra acceleration to the ground electric potential before being neutralized. The power supply 45 must send more energy to the power supply 46 via transformer 36 to restore the voltage of the capacitor C2. The transferred electric power is calculated by formula: P=V×I, as previously described. Otherwise, if the products of the nuclear fusion reaction are negatively charged then a positive electric potential, can be applied to the deflector 27 (FIG. 4), increasing the kinetic energy of the negatively charged products, and the negatively charged products attract easily positive ions from the neutralizer 28 (FIG. 4), preferably a duoplasmatron, which is at the positive electric potential. The neutralizer electrons pushed towards to the positive potential will decrease the voltage of the capacitor C2 of the switching-mode power supply (FIG. 13). The charged products gain more kinetic energy reaching an extra acceleration to the ground electric potential before being neutralized. The power supply 45 must send more energy to the power supply 46 via transformer 36 to restore the voltage of the capacitor C2, similarly as previously described. After accomplished desired conversions of energy as described above, which can excess 95% of efficiency using aneutronic fuels like boron hydrides and helium-3, the remaining of the charged products must be fully neutralized, for that, there are neutralizer like 29 and 32 (FIG. 4) at the ground electric potential. As previously described, the sum of the electron current of the neutralizers must be equaled to the sum of the electron current of the ion injector belt. The heat exchange system, previously described in FIG. 8, can recycle the magnet bore heat energy, due to electromagnetic radiation, to generate electricity. It is also worthwhile for recycling heat energy from fast neutrons if using neutronic fuels like deuterium. The operation of the alternative embodiment FIG. 11 and FIG. 12 are similar to the preferred embodiment. Calculations As aforesaid, the nuclear fusion fuel for this disclosure can be composed of light atomic nucleus like hydrogen, deuterium, tritium, helium, lithium, beryllium, boron, and their various isotopes. Some isotopes like hydrogen-1, helium-3, lithium-6, lithium-7 and boron-11 are the interest for aneutronic nuclear fusion (low neutron radiation hazards), as example: 1H+26Li→4He+(3He+6Li)→34He+1H+20.9 MeV (153TJ/Kg≈42GWh/Kg) 1H+7Li→24He+17.2 MeV (204TJ/Kg≈56GWh/Kg) 3He+3He→4He+21H+12.9 MeV (205TJ/Kg≈57GWh/Kg) 1H+11B→34He+8.7 MeV (66TJ/Kg≈18GWh/Kg) Boron hydrides (plentiful in the Earth) and helium-3 (plentiful in the lunar regolith) are special aneutronic fuels, due to its primary reaction produce less than 0.2% of the total energy as fast neutrons, meaning that a minimum of radiation shield is required for a spacecraft, and the products kinetic energy is directly convertible to electricity with a high efficiency, more than 95%, as previously described. With hydrogen, boron forms a series of chemical compounds called borane or boron hydrides, as example, decaborane (B10H14) which have low toxicity and high density (950 Kg/m3), and relatively inexpensive taking account that it is clean and its specific energy is higher than the fossil fuels (18×106 KWh/Kg versus 13 KWh/Kg). The following calculations take decaborane (B10H14) as example: 1H+11B+123 KeV→34He+8.68 MeV (66TJ/Kg≈18GWh/Kg) Electronvolt (eV) is a unit of energy and a Volt (V) is a unit of electric voltage. Electronvolt to Joule: 1 eV=1.60218×10−19J Electronvolt to temperature: 1 eV=11604.505 Kelvin→1 eV=11604.505 K−273.15=11331.355° C. Electronvolt to mass: 1 eV=1.782662×10−36 Kg→1 MeV=1.782662×10−30 Kg Charge: proton=+1.60218×10−19 C, electron=−1.60218×10−19 C Particles mass: proton=1.67262×10−27 Kg, neutron=1.67493×10−27 Kg, electron=0.00091×10−27 Kg 11B mass=5 protons+5 electrons+6 neutrons=5×1.67262×10−27+5×0.00091×10 −27+6×1.67493×10−27=18.41723×10 −27 Kg 1H mass=1 proton+1 electron=1×1.67262×10−27+1×0.00091×10−27=1.67353×10−27 Kg Decaborane (B10H14) mass: 10×18.41723×10−27+14×1.67353×10−27=207.60172×10−27 Kg Specific energy of decaborane (eV/Kg): 10×(8.68 MeV−123 KeV)/(207.60172×10−27 Kg)=4.12183×1032 eV/Kg Specific energy of decaborane (J/Kg): 4.12183×1032×1.60218×10−19=66.03921×1012 J/Kg Specific energy of decaborane (GWh/Kg): 66.03921×1012/(3.6×106)=18.34422×106 KWh/Kg=18.34422 GWh/Kg Extracting 14 electrons from decaborane to produce positively charged particles: 207.60172×10−27−14×0.00091×10−27=207.58898×10−27 Kg Specific ionization of decaborane (C/Kg) after extracting 14 electrons: 14×1.60218×10−19/207.58898×10−27=+10.80525×106 C/Kg The specific energy and specific ionization are essential parameters to define the magnetic flux and electrical potentials. Using the specific energy to find velocity of products from nuclear reaction: E=½mv 2→=((E/m)×2)0.5 →v=((66.03921×1012 J/Kg)×2)0.5 →v=11.49254×106 m/s Specific impulse: 11.49254×106/9.80665=1.17191×106 s Defining the magnet bore about 1 meter (0.5 meter of internal radius) and using the specific ionization to find magnetic flux: r=mv/qB→r=(v/B)×(m/q)→r=(v/B)/(q/m)→B=v/(r×(q/m))→B=11.49254×106/(0.5×10.80525×106)=2.12721 Tesla A superconducting magnet of 4.5 Tesla or higher and about 1 meter of bore is sufficient to confine radially the plasma (reactants and products). The reactants (1H+11B) needs at least 123 KeV of kinetic energy for fusing, however 600 KeV is considered the best, nevertheless, in theory, only 123 KeV is consumed by the reaction. Losses caused by electromagnetic radiation (bremsstrahlung) are considered a fail of the coating of the magnet bore responsible to reflect the electromagnetic radiation back to plasma. Calculation of a negative electric potential (first electric potential) for electrostatic acceleration of the positively charged particles to gain enough kinetic energy to fuse: E=q×V→V=E/q→V=(E/m)/(q/m)→V=((10×600 KeV×1.60218×10−19)/207.58898×10−27)/10.80525×106=428.57165×103 Volts Temperature: 600×103×(11604.505 K−273.15)=6.79881 billion ° C. An electric potential (first electric potential) of −430 KV is enough to the charged particles gain the required energy kinetic of about 7 billions ° C. Calculation of a positive potential (second electric potential) to confine longitudinally the reactants allowing the charged products (helium-4) escaping. A kinetic energy choice between reactants 600 KeV and products 8.68 MeV would be something about 1.4 MeV: E=q×V→V=E/q→V=(E/m)/(q/m) V=((10×1.4 MeV×1.60218×10−19)/207.58898×10−27)/10.80525×106=928.57191×103 Volts V=928.57191×103−430 KV=498.57191×103 Volts A positive electric potential (second electric potential) of +500 KV is enough to confine the reactants allowing the products to escape. As aforesaid, fusing positively charged particles represents a normal energy production and low bremsstrahlung radiation, otherwise fusing negatively charged particles represents a high energy production and high bremsstrahlung radiation, however, for highest energy production, the specific ionization must keep as low as possible, that is the plasma charged particles must be a quasi-neutral plasma resulting in a high density, which implies in a higher magnetic flux and a higher acceleration and confinement voltage. The consumption of the reactor at power of 200MWatts using a fuel with specific energy of 66.03921×1012 J/Kg: 200 MW=200×106 J/s→200×106 J/s/66.03921×1012 J/Kg=3.02850×10−6 Kg/s A fuel consumption of 3.03 milligrams per second is enough for producing 200MWatts. Ion source current: 3.02850×10−6 Kg/s×10.80525×106 C/Kg=32.72374 C/s The ion injector belt must provide a current of at least 32.8 Amperes for producing 200MWatts. Cyclotron frequency: f=qB/(2πm)=(q/m)×(B/2π)=10.80525×106×4.5/(2×3.14159)=7.73869 MHz Magnetic pressure: pm=B2/2μ°=4.52/(2×4π×107)=8.05721×106 J/m3 8.05721×106/101325=79.51848 atmospheres Acceleration of a spacecraft of 500000 Kg (500 tons) at power of 200MWatts: 200 MWatts in 1 s→200×106 Joule→E=½mv 2→200×106=½×500000×v 2 →v=28.28427 m/s a=Δv/Δt→a=28.28427 m/s2→g-force=28.28427/9.80665=2.88419 g f=ma→f=500000×28.28427→f=14.14223×106N The formula E=½mv2 refers to the action and reaction (Newton's third law) between the spacecraft and the exhausting products and not between the spacecraft and the origin point or launching site. In the outer space, half of the energy goes to the exhausting products: ½E=½ mv2 →E=mv 2→200×106=500000×v2→v=20 m/s→a=Δv/Δt→a=20 m/s2→g-force=2.0 g A power of 200MWatts is enough for a spacecraft of 500000 Kg (500 tons) reach an acceleration of 28.2 m/s2 (2.8 g-force) in the Earth's atmosphere and 20 m/s2 (2 g-force) in the outer space. A travel between Earth and Mars (closest=55758006 km and farthest=400000000 km) at an acceleration of 20 m/s2 (2 g-force): Midway: s=(103×(55758006+400000000)/2)/2=113.93950×109m s=s 0 +v 0 t+½at2→113.93950×109=0+0+½×20×t2→t=106.74244×103 s→t×2≈3 days v=v 0+at→v=0+20×106.74244×103→v=2.13485×106 m/s→v=7.68546×106 Km/h v 2 =v 0 2+2aΔs→v 2=0+2×20×113.93950×109 →v=2.13485×106 m/s→v=7.68546×106 Km/h Fuel consumption: 3.02850×10−6×(2×106.74244×103)=0.64653 Kg Mass converted into energy: 4.12183×1032×0.64653×1.782662×10−36=0.000475 Kg (0.073%) The travel between Earth and Mars, including acceleration and deceleration, will take 3 days and a decaborane consumption of 0.647 Kg, reaching a maximum velocity of 7.68×106 Km/h at the midway. A travel between Earth and Moon (perigee=348200 km and apogee=402100 km): Midway: s=(103×(348200+402100)/2)/2=187.575×106m s=s 0 +v 0 t+½at 2→187.575×106=0+0+½×20×t 2 →t=4.33099×103 s→t×2≈3 hours v 2=v0 2+2aΔs→v 2=0+2×20×187.575×106→v=86.61986×103 m/s→v=311.83149×103 Km/h Fuel consumption: 3.02850×10−6×(2×4.33099×103)=0.026232 Kg Mass converted into energy: 4.12183×1032×0.026232×1.782662×1036=0.0000193 Kg (0.073%) The travel between Earth and Moon, including acceleration and deceleration, will take 3 hours and a decaborane consumption of 0.027 Kg, reaching a maximum velocity of 311.83×103 Km/h at the midway. Time to overwhelm the speed of light barrier (299792458 m/s) at an acceleration of 20 m/s2 (2 g-force): v=v 0+at→299792458=0+20×t→t=14.98963×106 s→t≈5 months and 25 days Fuel consumption: 3.02850×10−6×14.98963×106=45.39072 Kg Mass converted into energy: 4.12183×1032×45.39072×1.782662×10−36=0.033356 Kg (0.073%) The time for overwhelming the speed of light barrier is about 5 months and 25 days at an acceleration of 20 m/s2 with decaborane consumption about of 45.4 Kg. A travel between Earth and Alpha Centauri star (4.365 light years≈1.338 parsec≈41.28666×1015 m): Midway: s=41.28666×1015/2=20.64333×1015 m s=s 0 +v 0 t+½ at2→20.64333×1015=0+0+½×20×t 2 →t=45.43493×106 s→t×2≈2 years and 11 months v 2 =v 0 2+2aΔs→v 2=0+2×20×20.64333×1015 →v=908.69862×106 m/s→v=3.27131×109 Km/h≈3.031c Fuel consumption: 3.02850×10−6×(2×4.33099×103)=275.19937 Kg Mass converted into energy: 4.12183×1032×275.19937×1.782662×10−36=0.202212 Kg The travel between Earth and Alpha Centauri star, including acceleration and deceleration, will take 2 years and 11 months and a decaborane consumption of 275.2 Kg, reaching a maximum velocity of 3.27131×109 Km/h, about three times the speed of light, at the midway. Global Warming Problem: World energy consumption per year is about 500 EJ (500×1018 Joule 138.889 TWh) Specific energy of the fossil fuels: 13 KWh/Kg=46.9×106J/Kg Fossil fuel consumption: 500×1018/46.9×106=10.66098×1012 Kg That is about 10.66 billion tons of carbon dioxide (CO2) and other toxic gases going to atmosphere each year increasing the greenhouse effect. Global Warming Solution: Specific energy of the decaborane: 18×106 KWh/Kg=66×1012J/Kg Decaborane consumption: 500×1018/66×1012=7.57575×106 Kg That will be only 7576 tons of clean, inert, safe and light helium gas ascending above the ozone layer per year. Some helium gas may escape to the outer space and be swept by the solar wind. Deforestation for Food Production Solution: For save the biodiversity and to reduce the destruction of forested areas to be used as arable land and pasture for food production. This disclosure as energy source and an improvement in food technology is possible to synthesize carbohydrates, monounsaturated fats, proteins and vitamins, using electrochemical process, without toxic elements (e.g., mercury, lead), without radioactive elements (e.g., carbon-14, potassium-40), without animal corpse consumption (e.g., foot-and-mouth disease, mad-cow disease, avian influenza). The electrochemical food production will be worthwhile for outer space travels too. This disclosure has no technical drawbacks, no environmental damage, and is more feasible than any other renewable energy like wind power, solar energy, hydroelectricity, and biofuels; all of them have low energy density requiring a lot of hectares. CONCLUSION, RAMIFICATIONS, AND SCOPE OF INVENTION Accordingly, the reader will see that the nuclear fusion reactor of this invention evolve an improved fusion energy concept, that can be used to generate electricity at high efficiency; to thrust a spacecraft at very high performance levels, exceeding conventional means by specific impulse (propellant efficiency) factors of 2600-4680 at an inexpressive radiation hazards requiring insignificant shielding; most of fusion product is the helium that is safe and a non toxic waste; and as alternative source of energy can reduce the global warming problem; and also is relatively inexpensive and have abundant fuel supply, has scalability of size and power, easier engineering and maintainability. While my above description contains a lot of specificities, these should not be construed as limitations on the scope of the invention, but rather as an exemplification of one preferred embodiment thereof. Many other variations are possible. For example, it can be comprised by two, three, four, five, six, seven, height magnets, and so on, varying form and size of the parts. It will be appreciated by those of ordinary skill in the art that various changes can be made in the parts and steps of the apparatus and method without departing from the spirit and scope of the invention. Accordingly, the scope of the invention should be determined not by the embodiments illustrated, but by the appended claims and their legal equivalents.