The Manticore is a mythological beast with a human face and a lion’s body, described as a malevolent creature with unmatched skills and abilities.
GRPerks View Our Feedback Visit Our eBay Store Add Us To Favorite Sellers Lion Brand 525-204 Mandala Yarn-Chimera (3Pk) With an exceptionally wide range of enchanting colors, from jewel tones, to bright children's colors, and even classic shades for men, one glimpse of this mystical new yarn will leave you spellbound. The ideal weight for crocheters, just one ball will allow you to conjure a scarf, small shawl, or even a sorcerer's cap! Weight category: 3. Content: 100% Acrylic. Put Up: 5.3oz/150g, 590yd/539m. Gauge: 22sx30r = 4in/10cm on size US5/3.75mm. Suggested crochet hook size H8. Dyelotted: we try but are not always able to match dyelots. Care: Machine wash, machine dry. Comes in a variety of colors. Each sold separately. Imported. Condition: New Brand: LION BRAND Category: YARN About Us Payment Shipping Terms Returns Welcome to GRPerks! Your source for quality arts and crafts supplies at reduced prices. Satisfaction guaranteed! We guarantee your satisfaction and stand behind everything we sell. Standa
People have long been intrigued by chimeras. Greek mythology – from whence the word originated – has provided numerous examples of fantastical chimeric creatures: the griffin (part eagle, part lion), the minotaur (part bull, part human), the centaur (part horse, part human), and Pegasus (part horse, part bird). Chimeras were broadly viewed as monstrous, foreboding creatures. Even before the development of genetic engineering,
Directed by: Alice Rohrwacher Starring: Josh O'Connor, Carol Duarte, Vincenzo Nemolato, Alba Rohrwacher, Isabella Rossellini
Northshire - Chimera Metal Wall Art Dimensions: 80 cm x 68 cm Dimensions: 31.5'' x 26.7'' inches Material: 1.5 mm steel Color: Textured, Black Paint Packing: Sturdy box suitable for transport and gift. Please note that the product stands 1cm away from the wall due to elevation screws and hanging attachments. Easy to hang each piece with one nail from the hanging attachment on the back of the product. The design is suitable for the outside but the nails and elevation screws could get rustier in a period of time if they expose too much rain or snow Chimera is a creature that existed in Greek mythology. Express and Free Shipping! (max. 3-5 days) CUSTOMIZABLE: Northshire metal wall decor comes in a set of four pieces that can be joined together, using the included clips, to create a set of Four Elements decor pieces. EYE-CATCHING MODERN WALL DECOR: Northshire Wall Decor is a set of wire geometric metal hanging wall decoration is inspirational wall art for living room, bedroom, dining room, kitchen, and for your entire home. EASY TO SET UP: Lightweight metal decor is easy to handle, mount, and ready to hang on your walls. You can hang it with a single nail from the hook on the back of the decor. Doesn't need any additional mounting process. DESIGNED BY NORTHSHIRE WITH : I love how these simple rods, when combined together define a mass of volume while remaining very visually light. Even on the wall, they look like primitive diamonds, half embedded within the wall but still occupying a volume and presence. With a few sets hanging from the top of a staircase, you will really create a beautiful impact as you climb the stairs. SATISFACTION GUARANTEED OR YOUR MONEY BACK: Northshire is committed to the highest levels of quality and excellence and stands behind every product we make. We know youre going to love your purchase but if youre not completely thrilled for any reason (or even no reason at all), simply contact us within 30 days of receiving your order and well happily resolve the matter or issue.
Slim fit and lightweight soft jersey t-shirt with double-needle hems for durability. Solid colors are 100% cotton, heather colors are cotton blend. Range of colors available, with the option to print on front or back. Sizes from S-3XL, suitable for men and women. Fullmetal Fusion Shirt, fullmetal fusion ha, fullmetal alchemist brotherhood, full metal alchemist, nina tucker, fusion, anime, chimera, fullmetal alchemist, geek, fullmetal, alchemist, nerd, nina, fusion fullmetal alchemist, fusion fullmetal alchemist funny, funny, manga, meme, full metal alchemist brotherhood, fusion full metal, fusion ha, fusion fullmetal alchemist lover, otaku, fullmetal alchemist nina, alexander fma, chimera fma brotherhood, nina and dog fusion, nina anime character, the unbeatable fusion, fullmetal alchemist movie
About the Book "After the shocking conclusion of the first volume, the remaining members of Chimera regroup, sullen. Vanessa confesses she heard Manny's prophecy, and says they have a destiny to fulfill... a sacrifice. Meanwhile, Regan is hesitant to tell Hannah about the prophecy, but before she can, she's overwhelmed by auditory pain, and Hannah hears a hauntingly familiar voice as she tries to help Regan.."-- Book Synopsis The haunting second arc from the critically acclaimed creators of Bone Parish. After the shocking conclusion of the first volume, the remaining members of Chimera regroup, sullen. Vanessa confesses she heard Manny's prophecy, and says they have a destiny to fulfill... a sacrifice. Meanwhile, Regan is hesitant to tell Hannah about the prophecy, but before she can, she's overwhelmed by auditory pain, and Hannah hears a hauntingly familiar voice as she tries to help Regan... New York Times bestselling horror writer Cullen Bunn (Harrow County, The Empty Man) reunites with his Bone Parish co-creator, artist Jonas Scharf (Avengers Of The Wasteland), to continue the second chapter of their hit rural horror series laced with supernatural fantasy rooted in the way we process the world--our senses. Collecting BASILISK #5-8. About the Author Cullen Bunn is an American comics writer, novelist, and short story writer, [1] best known for his work on comic books such as Uncanny X-Men , X-Men: Blue , Magneto and various Deadpool miniseries for Marvel Comics, and his creator-owned series The Damned and The Sixth Gun for Oni Press and Harrow County for Dark Horse Comics, as well as his middle reader horror novel Crooked Hills , and his short story work collection Creeping Stones & Other Stories . As of 2018, Bunn writes X-Men: Blue and Venomized for Marvel, PumpkinHead for Dynamite, Subspecies for Action Lab, Shadow Roads for Oni Press, Regression for Image, Unholy Grail , Brothers Dracul and Harrow County for Dark Horse, as well as comics for BOOM! Studios.
One Sling Per Customer Per Order: To ensure fairness and accessibility to all our customers, we kindly request that each customer selects only one sling per order. This way, we can share the love with as many adventurers as possible. Customers buying >1 will have their orders cancelled. No Returns Accepted: We are p
One Sling Per Customer Per Order: To ensure fairness and accessibility to all our customers, we kindly request that each customer selects only one sling per order. This way, we can share the love with as many adventurers as possible. Customers buying >1 will have their orders cancelled. No Returns Accepted: We are p
One Sling Per Customer Per Order: To ensure fairness and accessibility to all our customers, we kindly request that each customer selects only one sling per order. This way, we can share the love with as many adventurers as possible. Customers buying >1 will have their orders cancelled. No Returns Accepted: We are p
Chimera Bracelet TutorialJust like the mythical hybrid of multiple animals whose name we used for this stunner, our Chimera bracelet magically combines multiple jewelry techniques into one fantastic bracelet. The chimera bracelet is an advanced level project, seamlessly bringing together leather wrap & spanish knot techniques. .You will need:1.5mm leather (2 x 3 feet)4mm round swarovski crystals (28)4mm round Swarovski pearls or gemstones (56)Large hole button that fits 2 strands of leather (1)Nymo or Silamide thread (2 x 6 feet)GS Hypo Glue (Red)Size 10 NeedleNeedle nose pliersCutters for leatherScissorsBead mat.1. Gather all of your materials on a roll-proof work surface.2. Smash the end of the leather with your needle nose pliers so it will fit through the button.3. Put both pieces of leather through the button holes. You may need to use your needle nose pliers to pull the leather through.4. Place your button half way down on the leather.5. Start by tying a double Spanish Knot. Hold the leather under the button with your left thumb and finger. Take right strands of leather and place it under the left strands. Hold it with your right hand where it crosses, forming a 1 inch “D”.6. Let go of the button for a second, while you flip the same strand of leather over the top of the center strand. Again, hold it where it crosses under the button. Make sure the two strands remain uncrossed.7. Next, take the left strands of leather (still holding under the button with your left hand) and place them over the strand going out to the right.8. Then go under and pass through the loop to the left, towards you. Pull until you have formed two small loops that look like a pretzel.9. Still holding under the button pull each strand (left, then right) gradually reducing the size of the loops. Make sure the strands don’t cross! When the loops get to ¼ inch in size, pull on both strands at the same. Push up on knot with right finger and thumb. To make the knot tight, turn button to face you. Make sure you leave ¼ inch between the button and the double Spanish knot. (If you’d like your bracelet to be larger than 7 ½ inches, you can add additional space here to lengthen your bracelet).10. Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather a bit less than ½ inch away from the double Spanish knot.11. Place a pearl, crystal and pearl on your needle.12. Keeping the beads on the needle, place the needle and beads behind the four strands of leather. Push the beads up between the strands of leather.13. Take needle and pass it over the top of the leather cord and through the top bead, over leather through the middle bead, over leather, through the bottom bead, over leather. Pull the thread through and give it a tug to tighten the thread around the leather.14. Secure these first 3 beads by sewing up through the back of the leather through the beads and down the front of the leather and through the beads.15. Place a crystal, a pearl and a pearl on your needle.16. Repeat steps 12-13 to stitch in beads.17. Place a pearl, a pearl and a crystal on your needle.18. Repeat steps 12-13 to stitch in beads. You will notice a pattern starting to form with the pearls and crystals.19. Repeat pattern until you have completed 14 rows of 3 beads. (You can decrease the number of rows to make your bracelet smaller, if desired). To complete the first section of sewing, thread through the final row twice, like in step 14.20. Secure the end by passing the needle through the thread under the bottom of the bead and around leather.21. Repeat stitch twice, then trim the thread close to the leather.22. Place a small pin-sized drop of GS Hypo Glue (red) on the area where you cut the thread.23. Turn the bracelet so that the 4 strands of leather are coming down toward you. Separate the strands into the two right hand strands and the two left hand strands.24. Tie a regular Spanish knot using the two right hand strands: take the right strand and place it under the left strand creating a 1 inch “D”. Flip the same strand over the top of the center strand. Take the left strand and place it over the strand going out to the right. Then pass it through the loop, to the left, towards you.25. Pull the knot tight..26. Make another Spanish knot using the two left hand strands.27. Make a Spanish knot using the two center strands..28. Continue the Spanish knot pattern until you have tied eight Spanish knots in total. (If you want to add length to your bracelet, you can add 3 more knots in this section.) Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather.29. Repeat steps 11-14 to stitch in beads to begin the next stitched section.30. Tug on the thread to tighten it around the leather.31. Continue the pattern until you have 14 rows of 3 beads in the second stitched section. Finish the section by repeating steps 19-22.32. Repeat steps 5-9 to tie a double Spanish knot.33. Tug firmly to tighten the knot. Make sure to leave a bit less than ½ inch between the beads and the knot..34. Leaving plenty of room for your button, make another double Spanish knot.35. Your end knots should look like this.36. Using the GS Hypo glue (red), place the needle into both double Spanish knots from both sides. Once glued, pull knots securely.37. Leave to dry for 5 minutes, then cut the ends of the leather about ¼ inch away from the knot.The finished bracelet is shown below.We hope you enjoy this fun fusion of techniques!Happy Beading!!
Chimera Bracelet TutorialJust like the mythical hybrid of multiple animals whose name we used for this stunner, our Chimera bracelet magically combines multiple jewelry techniques into one fantastic bracelet. The chimera bracelet is an advanced level project, seamlessly bringing together leather wrap & spanish knot techniques. .You will need:1.5mm leather (2 x 3 feet)4mm round swarovski crystals (28)4mm round Swarovski pearls or gemstones (56)Large hole button that fits 2 strands of leather (1)Nymo or Silamide thread (2 x 6 feet)GS Hypo Glue (Red)Size 10 NeedleNeedle nose pliersCutters for leatherScissorsBead mat.1. Gather all of your materials on a roll-proof work surface.2. Smash the end of the leather with your needle nose pliers so it will fit through the button.3. Put both pieces of leather through the button holes. You may need to use your needle nose pliers to pull the leather through.4. Place your button half way down on the leather.5. Start by tying a double Spanish Knot. Hold the leather under the button with your left thumb and finger. Take right strands of leather and place it under the left strands. Hold it with your right hand where it crosses, forming a 1 inch “D”.6. Let go of the button for a second, while you flip the same strand of leather over the top of the center strand. Again, hold it where it crosses under the button. Make sure the two strands remain uncrossed.7. Next, take the left strands of leather (still holding under the button with your left hand) and place them over the strand going out to the right.8. Then go under and pass through the loop to the left, towards you. Pull until you have formed two small loops that look like a pretzel.9. Still holding under the button pull each strand (left, then right) gradually reducing the size of the loops. Make sure the strands don’t cross! When the loops get to ¼ inch in size, pull on both strands at the same. Push up on knot with right finger and thumb. To make the knot tight, turn button to face you. Make sure you leave ¼ inch between the button and the double Spanish knot. (If you’d like your bracelet to be larger than 7 ½ inches, you can add additional space here to lengthen your bracelet).10. Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather a bit less than ½ inch away from the double Spanish knot.11. Place a pearl, crystal and pearl on your needle.12. Keeping the beads on the needle, place the needle and beads behind the four strands of leather. Push the beads up between the strands of leather.13. Take needle and pass it over the top of the leather cord and through the top bead, over leather through the middle bead, over leather, through the bottom bead, over leather. Pull the thread through and give it a tug to tighten the thread around the leather.14. Secure these first 3 beads by sewing up through the back of the leather through the beads and down the front of the leather and through the beads.15. Place a crystal, a pearl and a pearl on your needle.16. Repeat steps 12-13 to stitch in beads.17. Place a pearl, a pearl and a crystal on your needle.18. Repeat steps 12-13 to stitch in beads. You will notice a pattern starting to form with the pearls and crystals.19. Repeat pattern until you have completed 14 rows of 3 beads. (You can decrease the number of rows to make your bracelet smaller, if desired). To complete the first section of sewing, thread through the final row twice, like in step 14.20. Secure the end by passing the needle through the thread under the bottom of the bead and around leather.21. Repeat stitch twice, then trim the thread close to the leather.22. Place a small pin-sized drop of GS Hypo Glue (red) on the area where you cut the thread.23. Turn the bracelet so that the 4 strands of leather are coming down toward you. Separate the strands into the two right hand strands and the two left hand strands.24. Tie a regular Spanish knot using the two right hand strands: take the right strand and place it under the left strand creating a 1 inch “D”. Flip the same strand over the top of the center strand. Take the left strand and place it over the strand going out to the right. Then pass it through the loop, to the left, towards you.25. Pull the knot tight..26. Make another Spanish knot using the two left hand strands.27. Make a Spanish knot using the two center strands..28. Continue the Spanish knot pattern until you have tied eight Spanish knots in total. (If you want to add length to your bracelet, you can add 3 more knots in this section.) Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather.29. Repeat steps 11-14 to stitch in beads to begin the next stitched section.30. Tug on the thread to tighten it around the leather.31. Continue the pattern until you have 14 rows of 3 beads in the second stitched section. Finish the section by repeating steps 19-22.32. Repeat steps 5-9 to tie a double Spanish knot.33. Tug firmly to tighten the knot. Make sure to leave a bit less than ½ inch between the beads and the knot..34. Leaving plenty of room for your button, make another double Spanish knot.35. Your end knots should look like this.36. Using the GS Hypo glue (red), place the needle into both double Spanish knots from both sides. Once glued, pull knots securely.37. Leave to dry for 5 minutes, then cut the ends of the leather about ¼ inch away from the knot.The finished bracelet is shown below.We hope you enjoy this fun fusion of techniques!Happy Beading!!
One Sling Per Customer Per Order: To ensure fairness and accessibility to all our customers, we kindly request that each customer selects only one sling per order. This way, we can share the love with as many adventurers as possible. Customers buying >1 will have their orders cancelled. No Returns Accepted: We are p
Atriz contracena com Josh O'Connor e Isabella Rossellini em filme italiano de Alice Rohrwacher, que a levou a Cannes
Chimera Bracelet TutorialJust like the mythical hybrid of multiple animals whose name we used for this stunner, our Chimera bracelet magically combines multiple jewelry techniques into one fantastic bracelet. The chimera bracelet is an advanced level project, seamlessly bringing together leather wrap & spanish knot techniques. .You will need:1.5mm leather (2 x 3 feet)4mm round swarovski crystals (28)4mm round Swarovski pearls or gemstones (56)Large hole button that fits 2 strands of leather (1)Nymo or Silamide thread (2 x 6 feet)GS Hypo Glue (Red)Size 10 NeedleNeedle nose pliersCutters for leatherScissorsBead mat.1. Gather all of your materials on a roll-proof work surface.2. Smash the end of the leather with your needle nose pliers so it will fit through the button.3. Put both pieces of leather through the button holes. You may need to use your needle nose pliers to pull the leather through.4. Place your button half way down on the leather.5. Start by tying a double Spanish Knot. Hold the leather under the button with your left thumb and finger. Take right strands of leather and place it under the left strands. Hold it with your right hand where it crosses, forming a 1 inch “D”.6. Let go of the button for a second, while you flip the same strand of leather over the top of the center strand. Again, hold it where it crosses under the button. Make sure the two strands remain uncrossed.7. Next, take the left strands of leather (still holding under the button with your left hand) and place them over the strand going out to the right.8. Then go under and pass through the loop to the left, towards you. Pull until you have formed two small loops that look like a pretzel.9. Still holding under the button pull each strand (left, then right) gradually reducing the size of the loops. Make sure the strands don’t cross! When the loops get to ¼ inch in size, pull on both strands at the same. Push up on knot with right finger and thumb. To make the knot tight, turn button to face you. Make sure you leave ¼ inch between the button and the double Spanish knot. (If you’d like your bracelet to be larger than 7 ½ inches, you can add additional space here to lengthen your bracelet).10. Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather a bit less than ½ inch away from the double Spanish knot.11. Place a pearl, crystal and pearl on your needle.12. Keeping the beads on the needle, place the needle and beads behind the four strands of leather. Push the beads up between the strands of leather.13. Take needle and pass it over the top of the leather cord and through the top bead, over leather through the middle bead, over leather, through the bottom bead, over leather. Pull the thread through and give it a tug to tighten the thread around the leather.14. Secure these first 3 beads by sewing up through the back of the leather through the beads and down the front of the leather and through the beads.15. Place a crystal, a pearl and a pearl on your needle.16. Repeat steps 12-13 to stitch in beads.17. Place a pearl, a pearl and a crystal on your needle.18. Repeat steps 12-13 to stitch in beads. You will notice a pattern starting to form with the pearls and crystals.19. Repeat pattern until you have completed 14 rows of 3 beads. (You can decrease the number of rows to make your bracelet smaller, if desired). To complete the first section of sewing, thread through the final row twice, like in step 14.20. Secure the end by passing the needle through the thread under the bottom of the bead and around leather.21. Repeat stitch twice, then trim the thread close to the leather.22. Place a small pin-sized drop of GS Hypo Glue (red) on the area where you cut the thread.23. Turn the bracelet so that the 4 strands of leather are coming down toward you. Separate the strands into the two right hand strands and the two left hand strands.24. Tie a regular Spanish knot using the two right hand strands: take the right strand and place it under the left strand creating a 1 inch “D”. Flip the same strand over the top of the center strand. Take the left strand and place it over the strand going out to the right. Then pass it through the loop, to the left, towards you.25. Pull the knot tight..26. Make another Spanish knot using the two left hand strands.27. Make a Spanish knot using the two center strands..28. Continue the Spanish knot pattern until you have tied eight Spanish knots in total. (If you want to add length to your bracelet, you can add 3 more knots in this section.) Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather.29. Repeat steps 11-14 to stitch in beads to begin the next stitched section.30. Tug on the thread to tighten it around the leather.31. Continue the pattern until you have 14 rows of 3 beads in the second stitched section. Finish the section by repeating steps 19-22.32. Repeat steps 5-9 to tie a double Spanish knot.33. Tug firmly to tighten the knot. Make sure to leave a bit less than ½ inch between the beads and the knot..34. Leaving plenty of room for your button, make another double Spanish knot.35. Your end knots should look like this.36. Using the GS Hypo glue (red), place the needle into both double Spanish knots from both sides. Once glued, pull knots securely.37. Leave to dry for 5 minutes, then cut the ends of the leather about ¼ inch away from the knot.The finished bracelet is shown below.We hope you enjoy this fun fusion of techniques!Happy Beading!!
Premier Houseboats are pleased to present Chimera, a tug in full working order that is now available on a residential mooring. She can be lived on as is and used to cruise, or if you require more living space you could clear the engine room to create a more spacious static home. She has been extremely well maintained and has been still working up until very recently. Chimera has plenty of character, and is mechanically in excellent condition. The galley is fitted with oven, microwave and fridge/freezer and has plenty of storage and seating. There are three single bunks with storage in three separate cabins, together with further storage areas. The well equipped wheelhouse offers panoramic views whether moored or cruising, and equipment includes Decca 2000 Navistar, Raethon 24 mile radar, depth sounder, Robertson autopilot, 2 vhf and Onwa 12" radar and plotter. There is alsoa good amount of usable outside deck space. The 400 hp BW Alpha engine offers plenty of power if kept as a cruising home, and she has a maximum speed of 8 knots. She is currently licenced as Cat D.This charming tug could be a wonderful and characterful home, whether used as a cruising boat or completely renovated as a static home. There is a secure residential mooring available for her in a small, family run marina on the river Medway at Hoo, Kent. Vessel name: Chimera Condition: Excellent Vessel type: Tug Constructed: 1880 Berths: 3 Cabins: 3 Heads: 1 No. of engines: 1 Engine model: BW Alpha Engine power: 400 Fuel type: Diesel Maximum Speed: 8 Knots Length over all: 63' Beam: 12' 5" Maximum draft: 7' 2" Hull material: Steel Hull type: Other Hull colour: Black Disclaimer Premier Houseboats offers the details of this advert in good faith as it was presented by the seller or his representative but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the described item within this advert. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. The Item described within this advert is offered subject to prior sale, price change, or withdrawal without notice.
One Sling Per Customer Per Order: To ensure fairness and accessibility to all our customers, we kindly request that each customer selects only one sling per order. This way, we can share the love with as many adventurers as possible. Customers buying >1 will have their orders cancelled. No Returns Accepted: We are p
One Sling Per Customer Per Order: To ensure fairness and accessibility to all our customers, we kindly request that each customer selects only one sling per order. This way, we can share the love with as many adventurers as possible. Customers buying >1 will have their orders cancelled. No Returns Accepted: We are p
Chimera Bracelet TutorialJust like the mythical hybrid of multiple animals whose name we used for this stunner, our Chimera bracelet magically combines multiple jewelry techniques into one fantastic bracelet. The chimera bracelet is an advanced level project, seamlessly bringing together leather wrap & spanish knot techniques. .You will need:1.5mm leather (2 x 3 feet)4mm round swarovski crystals (28)4mm round Swarovski pearls or gemstones (56)Large hole button that fits 2 strands of leather (1)Nymo or Silamide thread (2 x 6 feet)GS Hypo Glue (Red)Size 10 NeedleNeedle nose pliersCutters for leatherScissorsBead mat.1. Gather all of your materials on a roll-proof work surface.2. Smash the end of the leather with your needle nose pliers so it will fit through the button.3. Put both pieces of leather through the button holes. You may need to use your needle nose pliers to pull the leather through.4. Place your button half way down on the leather.5. Start by tying a double Spanish Knot. Hold the leather under the button with your left thumb and finger. Take right strands of leather and place it under the left strands. Hold it with your right hand where it crosses, forming a 1 inch “D”.6. Let go of the button for a second, while you flip the same strand of leather over the top of the center strand. Again, hold it where it crosses under the button. Make sure the two strands remain uncrossed.7. Next, take the left strands of leather (still holding under the button with your left hand) and place them over the strand going out to the right.8. Then go under and pass through the loop to the left, towards you. Pull until you have formed two small loops that look like a pretzel.9. Still holding under the button pull each strand (left, then right) gradually reducing the size of the loops. Make sure the strands don’t cross! When the loops get to ¼ inch in size, pull on both strands at the same. Push up on knot with right finger and thumb. To make the knot tight, turn button to face you. Make sure you leave ¼ inch between the button and the double Spanish knot. (If you’d like your bracelet to be larger than 7 ½ inches, you can add additional space here to lengthen your bracelet).10. Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather a bit less than ½ inch away from the double Spanish knot.11. Place a pearl, crystal and pearl on your needle.12. Keeping the beads on the needle, place the needle and beads behind the four strands of leather. Push the beads up between the strands of leather.13. Take needle and pass it over the top of the leather cord and through the top bead, over leather through the middle bead, over leather, through the bottom bead, over leather. Pull the thread through and give it a tug to tighten the thread around the leather.14. Secure these first 3 beads by sewing up through the back of the leather through the beads and down the front of the leather and through the beads.15. Place a crystal, a pearl and a pearl on your needle.16. Repeat steps 12-13 to stitch in beads.17. Place a pearl, a pearl and a crystal on your needle.18. Repeat steps 12-13 to stitch in beads. You will notice a pattern starting to form with the pearls and crystals.19. Repeat pattern until you have completed 14 rows of 3 beads. (You can decrease the number of rows to make your bracelet smaller, if desired). To complete the first section of sewing, thread through the final row twice, like in step 14.20. Secure the end by passing the needle through the thread under the bottom of the bead and around leather.21. Repeat stitch twice, then trim the thread close to the leather.22. Place a small pin-sized drop of GS Hypo Glue (red) on the area where you cut the thread.23. Turn the bracelet so that the 4 strands of leather are coming down toward you. Separate the strands into the two right hand strands and the two left hand strands.24. Tie a regular Spanish knot using the two right hand strands: take the right strand and place it under the left strand creating a 1 inch “D”. Flip the same strand over the top of the center strand. Take the left strand and place it over the strand going out to the right. Then pass it through the loop, to the left, towards you.25. Pull the knot tight..26. Make another Spanish knot using the two left hand strands.27. Make a Spanish knot using the two center strands..28. Continue the Spanish knot pattern until you have tied eight Spanish knots in total. (If you want to add length to your bracelet, you can add 3 more knots in this section.) Next, thread 5 feet of Silamide or Nymo onto a size 10 needle, double the thread and knot it at the end. Tie a larkshead knot onto the bottom strand of leather.29. Repeat steps 11-14 to stitch in beads to begin the next stitched section.30. Tug on the thread to tighten it around the leather.31. Continue the pattern until you have 14 rows of 3 beads in the second stitched section. Finish the section by repeating steps 19-22.32. Repeat steps 5-9 to tie a double Spanish knot.33. Tug firmly to tighten the knot. Make sure to leave a bit less than ½ inch between the beads and the knot..34. Leaving plenty of room for your button, make another double Spanish knot.35. Your end knots should look like this.36. Using the GS Hypo glue (red), place the needle into both double Spanish knots from both sides. Once glued, pull knots securely.37. Leave to dry for 5 minutes, then cut the ends of the leather about ¼ inch away from the knot.The finished bracelet is shown below.We hope you enjoy this fun fusion of techniques!Happy Beading!!
One Sling Per Customer Per Order: To ensure fairness and accessibility to all our customers, we kindly request that each customer selects only one sling per order. This way, we can share the love with as many adventurers as possible. Customers buying >1 will have their orders cancelled. No Returns Accepted: We are p
Justin Chang reviews “La Chimera,” the fourth feature by the Italian writer and director Alice Rohrwacher, starring Josh O’Connor and Isabella Rossellini.