aFe Catback 49-44116-P 4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Polished Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter polished 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility. Apollo GT Series 4 IN 409 Stainless Steel Cat-Back Exhaust System w/ Polish Tip Apollo GT Series 4 IN 409 Stainless Steel Cat-Back Exhaust System w/ Polish Tip GM Silverado/Sierra 1500 14-18 V8-6.2L aFe Apollo GT Series 4in 409SS Cat Back Exh System Polished Tip 14-18GM Silverado 1500 V8-6.2LVehicle Fitments: Year Make Model Submodel 2014 - 2016 Chevrolet Silverado 1500 Base 2016 - 2018 Chevrolet Silverado 1500 Custom 2015 - 2018 Chevrolet Silverado 1500 LS, SSV 2014 - 2018 Chevrolet Silverado 1500 LT, WT, LTZ, High Country 2014 - 2018 GMC Sierra 1500 Base, SLT, Denali, SLE
Fuel Pump GM Small Block | Sierra 18-7260GM Small Block Fuel Pump | Sierra 18-7260Mechanical fuel pump for GM small block marine engines.Sierra fuel pumpFits GM V8 283, 307, 327, 350 and 409 cu. in. enginesFlange ID #40155Includes mounting gasketReplaces Holley 716-40155
Powerful and Clear Sound: Experience exceptional audio with 660 watts of maximum power and 220 watts RMS power. Wide Frequency Response: Covers a broad range from 40Hz to 6.3kHz for accurate sound reproduction. High Sensitivity: With a sensitivity of 95dB, every detail of your music is reproduced with clarity. Durable Construction: Built with high-quality materials including a steel basket and ferrite magnet for longevity. DS18 Pro Series 10" 660W Max 8-Ohm Mid Range Loud Speaker PRO-GM10 This Listing Includes: (1) 10" 660W 8-Ohm Mid range Loud Speaker Elevate your sound system with the DS18 10" 660W Mid-Range Speaker. With a maximum power of 660 watts and RMS power handling of 220 watts, this speaker delivers powerful and clear sound reproduction. Its wide frequency response from 40Hz to 6.3kHz ensures accurate reproduction of every note, providing an immersive listening experience. Featuring a sensitivity of 95dB, this speaker captures every detail of your music with clarity. Built with high-quality materials including a steel basket and ferrite magnet, the DS18 10" Mid-Range Speaker is designed for durability and longevity. Upgrade your sound system effortlessly with DS18's premium audio solutions. Features: Maximum power of 660 watts and RMS power handling of 220 watts Wide frequency response: 40Hz to 6.3kHz High sensitivity of 95dB for clear sound reproduction Durable construction with steel basket and ferrite magnet Technical Specifications: Nominal Diameter: 10" Nominal Impedance: 8 Ohms RMS Power Handling: 220 Watts Max Power Handling: 660 Watts Sensitivity: 95 dB Frequency Response: 40 Hz ~ 6.3 kHz Recommended Hi Pass Crossover: 90 Hz Voice Coil Diameter: 2" (50.8mm) Cone Material: Paper Surround Material: Cloth Basket Material: Steel Magnet Material: Ferrite Dimensions: Overall Diameter: 10.1" (256mm) Overall Depth: 4" (103mm) Front Mount Baffle Cutout: 9" (230mm) Mounting Depth: 3.7" (96mm) Motor Diameter: 4.72" (120mm)
4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Polished Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter polished 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2018 Chevrolet Silverado 1500 High Country 2014-2018 Chevrolet Silverado 1500 LTZ 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLT
557) Sony SLT-A77V w/Sony 18-250 (27-375)/3.5-6.3 @ 18.00 (27.00)mm, 1/60 @ F19.00, ISO400; exposed: 19-Aug-2013 16:09; GPS: 39.872887, -75.672781; alt: 420 ft; posted: 06-Oct-2013 {Panoramio271} [GM]
Image 1 of 25 from gallery of Encuentro Guadalupe Winery / graciastudio. Photograph by Edgar Lima
Powerful and Clear Sound: Experience exceptional audio with 660 watts of maximum power and 220 watts RMS power. Wide Frequency Response: Covers a broad range from 40Hz to 6.3kHz for accurate sound reproduction. High Sensitivity: With a sensitivity of 95dB, every detail of your music is reproduced with clarity. Durable Construction: Built with high-quality materials including a steel basket and ferrite magnet for longevity. DS18 Pro Series 10" 660W Max 8-Ohm Mid Range Loud Speaker PRO-GM10 This Listing Includes: (1) 10" 660W 8-Ohm Mid range Loud Speaker Elevate your sound system with the DS18 10" 660W Mid-Range Speaker. With a maximum power of 660 watts and RMS power handling of 220 watts, this speaker delivers powerful and clear sound reproduction. Its wide frequency response from 40Hz to 6.3kHz ensures accurate reproduction of every note, providing an immersive listening experience. Featuring a sensitivity of 95dB, this speaker captures every detail of your music with clarity. Built with high-quality materials including a steel basket and ferrite magnet, the DS18 10" Mid-Range Speaker is designed for durability and longevity. Upgrade your sound system effortlessly with DS18's premium audio solutions. Features: Maximum power of 660 watts and RMS power handling of 220 watts Wide frequency response: 40Hz to 6.3kHz High sensitivity of 95dB for clear sound reproduction Durable construction with steel basket and ferrite magnet Technical Specifications: Nominal Diameter: 10" Nominal Impedance: 8 Ohms RMS Power Handling: 220 Watts Max Power Handling: 660 Watts Sensitivity: 95 dB Frequency Response: 40 Hz ~ 6.3 kHz Recommended Hi Pass Crossover: 90 Hz Voice Coil Diameter: 2" (50.8mm) Cone Material: Paper Surround Material: Cloth Basket Material: Steel Magnet Material: Ferrite Dimensions: Overall Diameter: 10.1" (256mm) Overall Depth: 4" (103mm) Front Mount Baffle Cutout: 9" (230mm) Mounting Depth: 3.7" (96mm) Motor Diameter: 4.72" (120mm)
Introducing Flowmaster's new line of FlowFX Cat-back exhaust systems for the 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 Crew Cab and Double Cab models with 5.3L V8 gas engine. NOTE: Does not fit crew cab 2WD with 2 piece driveshaft. This dual 2.50 inch dual tailpipe system is perfect for the person looking for a moderate to aggressive exterior and interior sound level with all of the performance benefits that you would expect from Flowmaster. Features include 409S stainless steel mandrel bent tubing flowing into a FlowFX straight-through performance muffler for maximum power and a deep aggressive sound. The system is then finished off with dual 4.00 inch black ceramic coated 304 stainless steel tips showing off the Flowmaster logo and exits in front of the rear tire. Designed for easy installation, this system includes all necessary parts, hardware and detailed instructions. Dyno-Tuned For Maximum Performance Stainless Steel Mandrel Bent Tubing Moderate/Aggressive Sound Easy Installation
aFe Catback 49-44116-B 4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Black Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter black 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility. Apollo GT Series 4 IN 409 Stainless Steel Cat-Back Exhaust System w/ Black Tip Apollo GT Series 4 IN 409 Stainless Steel Cat-Back Exhaust System w/ Black Tip GM Silverado/Sierra 1500 14-18 V8-6.2L aFe Apollo GT Series 4in 409SS Cat Back Exh System w/Blk Tip 14-18 GM Silverado/Sierra 1500 V8-6.2LVehicle Fitments: Year Make Model Submodel 2014 - 2016 Chevrolet Silverado 1500 Base 2016 - 2018 Chevrolet Silverado 1500 Custom 2014 - 2018 Chevrolet Silverado 1500 High Country, WT, LT, LTZ 2015 - 2018 Chevrolet Silverado 1500 SSV, LS 2014 - 2018 GMC Sierra 1500 Base, Denali, SLE, SLT
Powerful and Clear Sound: Experience exceptional audio with 660 watts of maximum power and 220 watts RMS power. Wide Frequency Response: Covers a broad range from 40Hz to 6.3kHz for accurate sound reproduction. High Sensitivity: With a sensitivity of 95dB, every detail of your music is reproduced with clarity. Durable Construction: Built with high-quality materials including a steel basket and ferrite magnet for longevity. DS18 Pro Series 10" 660W Max 8-Ohm Mid Range Loud Speaker PRO-GM10 This Listing Includes: (1) 10" 660W 8-Ohm Mid range Loud Speaker Elevate your sound system with the DS18 10" 660W Mid-Range Speaker. With a maximum power of 660 watts and RMS power handling of 220 watts, this speaker delivers powerful and clear sound reproduction. Its wide frequency response from 40Hz to 6.3kHz ensures accurate reproduction of every note, providing an immersive listening experience. Featuring a sensitivity of 95dB, this speaker captures every detail of your music with clarity. Built with high-quality materials including a steel basket and ferrite magnet, the DS18 10" Mid-Range Speaker is designed for durability and longevity. Upgrade your sound system effortlessly with DS18's premium audio solutions. Features: Maximum power of 660 watts and RMS power handling of 220 watts Wide frequency response: 40Hz to 6.3kHz High sensitivity of 95dB for clear sound reproduction Durable construction with steel basket and ferrite magnet Technical Specifications: Nominal Diameter: 10" Nominal Impedance: 8 Ohms RMS Power Handling: 220 Watts Max Power Handling: 660 Watts Sensitivity: 95 dB Frequency Response: 40 Hz ~ 6.3 kHz Recommended Hi Pass Crossover: 90 Hz Voice Coil Diameter: 2" (50.8mm) Cone Material: Paper Surround Material: Cloth Basket Material: Steel Magnet Material: Ferrite Dimensions: Overall Diameter: 10.1" (256mm) Overall Depth: 4" (103mm) Front Mount Baffle Cutout: 9" (230mm) Mounting Depth: 3.7" (96mm) Motor Diameter: 4.72" (120mm)
aFe Catback 49-44116-B 4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Black Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter black 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility. Apollo GT Series 4 IN 409 Stainless Steel Cat-Back Exhaust System w/ Black Tip Apollo GT Series 4 IN 409 Stainless Steel Cat-Back Exhaust System w/ Black Tip GM Silverado/Sierra 1500 14-18 V8-6.2L aFe Apollo GT Series 4in 409SS Cat Back Exh System w/Blk Tip 14-18 GM Silverado/Sierra 1500 V8-6.2LVehicle Fitments: Year Make Model Submodel 2014 - 2016 Chevrolet Silverado 1500 Base 2016 - 2018 Chevrolet Silverado 1500 Custom 2014 - 2018 Chevrolet Silverado 1500 High Country, WT, LT, LTZ 2015 - 2018 Chevrolet Silverado 1500 SSV, LS 2014 - 2018 GMC Sierra 1500 Base, Denali, SLE, SLT
This DPF-back exhaust system is constructed of 5" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 6" diameter black 304 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability. This system fits: Double Cab / Short-Bed - 149.4" Wheelbase, Crew Cab / Short-Bed - 158.9" Wheelbase, Double Cab / Long-Bed - 162.4" Wheelbase, Crew Cab / Long-Bed - 172" WheelbaseThis Part Fits: Year Make Model Submodel 2021-2024 Chevrolet Silverado 2500 HD Custom 2020-2024 Chevrolet Silverado 2500 HD High Country 2020-2024 Chevrolet Silverado 2500 HD LT 2020-2024 Chevrolet Silverado 2500 HD LTZ 2020-2024 Chevrolet Silverado 2500 HD WT 2024 Chevrolet Silverado 2500 HD ZR2 2020-2024 Chevrolet Silverado 3500 HD High Country 2020-2024 Chevrolet Silverado 3500 HD LT 2020-2024 Chevrolet Silverado 3500 HD LTZ 2020-2024 Chevrolet Silverado 3500 HD WT 2020-2024 GMC Sierra 2500 HD AT4 2024 GMC Sierra 2500 HD AT4X 2020-2021 GMC Sierra 2500 HD Base 2020-2024 GMC Sierra 2500 HD Denali 2024 GMC Sierra 2500 HD Denali Ultimate 2022-2024 GMC Sierra 2500 HD Pro 2020-2024 GMC Sierra 2500 HD SLE 2020-2024 GMC Sierra 2500 HD SLT 2020-2024 GMC Sierra 3500 HD AT4 2020-2021 GMC Sierra 3500 HD Base 2020-2024 GMC Sierra 3500 HD Denali 2024 GMC Sierra 3500 HD Denali Ultimate 2022-2024 GMC Sierra 3500 HD Pro 2020-2024 GMC Sierra 3500 HD SLE 2020-2024 GMC Sierra 3500 HD SLT
DS18 PRO-GM10 10" Mid-Range Loudspeaker 660 Watts 8-Ohm During the focused R&D period of perfecting the PRO-EXL line, DS18 identified the opportunity to spawn off another line since there was a division amongst competition audiophiles and concert/"voceteo" audiophiles. Therefore, DS18 created the PRO-GM audio line, which features a wide variety of midranges the produce concert-like sounds that will knock the wind out of you. A midrange driver is called upon to handle the most significant part of the audible sound spectrum, the region where the most fundamentals emitted by musical instruments and, most importantly, the human voice, lie. This region contains sounds which are the most familiar to the human ear, and where discrepancies from faithful reproduction are most easily observed. It is therefore paramount that a midrange driver of good quality be capable of low-distortion reproduction. Highlights DS18's highly popular series of High Powered pro audio. Great DS18 design of high durability parts including strong ferrite magnet, pressed paper cone, and CCA voice coils to get you maximum loudness with great sound quality. These mids come with a solid cone design and are pure midrange speakers and will be greatly complemented with a not included tweeter. Technical Details PRO-GM10 Product Manual Model: PRO-GM10 Type: Midrange Loudspeaker Size: 10" RMS Power: 220W MAX Power: 660W Frequency Response: 40Hz-6.3KHz Impedance: 8 Ohms Sensitivity: 95dB Materials Surround: Cloth Surround Frame: Black Stamp Steel Basket Cone: Black Paper Woofer Cone Magnet: Ferrite Voice Coil Wire: Kapton Measurements Voice coil size: 2" Magnet weight: 30 oz. Mounting Depth: 3.7" (86mm) Cut-Out Dimension: 9" (230mm) Fs 67 Hz Re 6.2 Ohm Qes 1.13 QMS 11.409 Qts 1.13 Vas 75.76L / 2.67ft3
4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Polished Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter polished 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2018 Chevrolet Silverado 1500 High Country 2014-2018 Chevrolet Silverado 1500 LTZ 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLT
Powerful and Clear Sound: Experience exceptional audio with 660 watts of maximum power and 220 watts RMS power. Wide Frequency Response: Covers a broad range from 40Hz to 6.3kHz for accurate sound reproduction. High Sensitivity: With a sensitivity of 95dB, every detail of your music is reproduced with clarity. Durable Construction: Built with high-quality materials including a steel basket and ferrite magnet for longevity. DS18 Pro Series 10" 660W Max 8-Ohm Mid Range Loud Speaker PRO-GM10 This Listing Includes: (1) 10" 660W 8-Ohm Mid range Loud Speaker Elevate your sound system with the DS18 10" 660W Mid-Range Speaker. With a maximum power of 660 watts and RMS power handling of 220 watts, this speaker delivers powerful and clear sound reproduction. Its wide frequency response from 40Hz to 6.3kHz ensures accurate reproduction of every note, providing an immersive listening experience. Featuring a sensitivity of 95dB, this speaker captures every detail of your music with clarity. Built with high-quality materials including a steel basket and ferrite magnet, the DS18 10" Mid-Range Speaker is designed for durability and longevity. Upgrade your sound system effortlessly with DS18's premium audio solutions. Features: Maximum power of 660 watts and RMS power handling of 220 watts Wide frequency response: 40Hz to 6.3kHz High sensitivity of 95dB for clear sound reproduction Durable construction with steel basket and ferrite magnet Technical Specifications: Nominal Diameter: 10" Nominal Impedance: 8 Ohms RMS Power Handling: 220 Watts Max Power Handling: 660 Watts Sensitivity: 95 dB Frequency Response: 40 Hz ~ 6.3 kHz Recommended Hi Pass Crossover: 90 Hz Voice Coil Diameter: 2" (50.8mm) Cone Material: Paper Surround Material: Cloth Basket Material: Steel Magnet Material: Ferrite Dimensions: Overall Diameter: 10.1" (256mm) Overall Depth: 4" (103mm) Front Mount Baffle Cutout: 9" (230mm) Mounting Depth: 3.7" (96mm) Motor Diameter: 4.72" (120mm)
558) Sony SLT-A77V w/Sony 18-250 (27-375)/3.5-6.3 @ 18.00 (27.00)mm, 1/60 @ F19.00, ISO400; exposed: 19-Aug-2013 16:05; GPS: 39.872747, -75.673173; alt: 471 ft; posted: 06-Oct-2013 {Panoramio272} [GM]
DS18 PRO-GM10 10" Mid-Range Loudspeaker 660 Watts 8-Ohm During the focused R&D period of perfecting the PRO-EXL line, DS18 identified the opportunity to spawn off another line since there was a division amongst competition audiophiles and concert/"voceteo" audiophiles. Therefore, DS18 created the PRO-GM audio line, which features a wide variety of midranges the produce concert-like sounds that will knock the wind out of you. A midrange driver is called upon to handle the most significant part of the audible sound spectrum, the region where the most fundamentals emitted by musical instruments and, most importantly, the human voice, lie. This region contains sounds which are the most familiar to the human ear, and where discrepancies from faithful reproduction are most easily observed. It is therefore paramount that a midrange driver of good quality be capable of low-distortion reproduction. Highlights DS18's highly popular series of High Powered pro audio. Great DS18 design of high durability parts including strong ferrite magnet, pressed paper cone, and CCA voice coils to get you maximum loudness with great sound quality. These mids come with a solid cone design and are pure midrange speakers and will be greatly complemented with a not included tweeter. Technical Details PRO-GM10 Product Manual Model: PRO-GM10 Type: Midrange Loudspeaker Size: 10" RMS Power: 220W MAX Power: 660W Frequency Response: 40Hz-6.3KHz Impedance: 8 Ohms Sensitivity: 95dB Materials Surround: Cloth Surround Frame: Black Stamp Steel Basket Cone: Black Paper Woofer Cone Magnet: Ferrite Voice Coil Wire: Kapton Measurements Voice coil size: 2" Magnet weight: 30 oz. Mounting Depth: 3.7" (86mm) Cut-Out Dimension: 9" (230mm) Fs 67 Hz Re 6.2 Ohm Qes 1.13 QMS 11.409 Qts 1.13 Vas 75.76L / 2.67ft3
Our new FlowFX cat-back exhaust system is manufactured using durable 409 stainless steel throughout and features a 3.00 inch inlet pipe leading to a single inlet/dual outlet FlowFX "straight-through" muffler for great sound and maximum performance. The dual 2.50 inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50 inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance FlowFX sound. The system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home. Notes: Fits 2wd and 4wd models and 2019 Classic models. Does not fit Crew Cab 2WD with 2 pc driveshaft or 2019 New Body Style. Features: • Easy at Home Installation • Full Stainless Steel Construction • Large 4.5 inch Black Ceramic Coated Stainless Tips • Deep Powerful Tone Inside and Outside the Vehicle Specifications California Proposition 65 Chemical Name: Chromium (hexavalent compounds); Nickel (Metallic) California Proposition 65 Required: Yes Catalytic Converter Included: No Emission Code: 5 Exhaust Series: FlowFX Exit Position: DOS Heat Shield: No Mount Type: Uses Factory Hangers Muffler Body Length (in): 18 Muffler Color: Natural Muffler Finish: Brushed Muffler Inlet Diameter (in): 3 Muffler Inlet Location: Centered Muffler Material: 409S Stainless Steel Muffler Outlet Diameter (in): 2.5 Muffler Outlet Location: Dual Outlet Muffler Overall Length (in): 24 Muffler Part Number: Kit Only Muffler Quantity: 1 Muffler Series: FlowFX Muffler Shape: Oval Muffler Type: Absorption Product Type: Exhaust Systems / Kits Single Dual: Dual Sound Level: Moderate/Aggressive System Type: Cat-back Tip Cut: Angle Tip Diameter (in): 4.5 Tip Edge Style: Cut Tip Finish: Black Ceramic Tip Length (in): 11 Tip Logo: Embossed Tip Material: 304 Stainless Tip Quantity: 2 Tip Shape: Round Tip Style: Single Wall Tubing Diameter (in): 2.5 Tubing Material: 409S Stainless Steel
Welcome to our listing for a stunning Diamond Ring that will leave you truly mesmerized! We are blessed with 50000+ satisfied customer with great response. Our branch: India, Hong kong, Thailand, Canada, USA. Ring-409 ✥ 𝐌𝐚𝐢𝐧 𝐒𝐭𝐨𝐧𝐞 𝐃𝐞𝐭𝐚𝐢𝐥𝐬 ↣ Shape : Radiant & Round Cut ↣ Type: CVD/HPHT ↣ Weight- 1.39 TDW- 47 Diamonds (1.26 ct F.P. Radiant E VS-1 Diamond) (0.0028 ct Round E VS - 46 Diamonds) ↣ Gold Weight (White Gold) : 10 K -1.10 gm 14 K -1.25 gm 18 K -1.40 gm ✥ R𝐢𝐧𝐠𝐬 𝐃𝐞𝐭𝐚𝐢𝐥𝐬 ↣ Metal Purity: Solid Gold (10KT, 14KT, 18KT) ↣ Metal Tone: Yellow, White, Rose ↣ Stamp/Hallmark: Yes Company Name- Lab Stone (Group Of Brahmani Exports) From Surat Gujarat (INDIA). We Manufacture Lab-grown Diamonds (Cvd And Hpht) in Round And All fancy shapes And sizes and can also take order as per requirement arise's as well as on time delivery to your door. We manufacture 0.01 to 7.00 ct size in all shapes and sizes if you're interested in certified lab-grown diamonds you can move to this link https://labstone.net/Diamond or demand page link -https://labstone.net/Demand Whatsapp number- +918000058070 Thank You Group Of Brahmani Exports Note : Keep visiting our website every day to get the latest Certified Stock https://labstone.net/Diamond
Flowmaster Chevrolet, GMC (6.2) Exhaust System Kit71788514-18 GM 1500 6.2L FFX CB SOS;Fits Crew Cab with 5.75' bed and Double Cab with 6.6' bed trucks with 143.5" wheelbases.;flowmaster; flowfx; gm; chevrolet; gmc; silverado; sierra; 1500; truck; 6.2l; cat; back; exhaust; system; kit; exit; stainless; single; side;;Flowmaster FlowFX Cat-Back Exhaust System;Fits...
Flowmaster Chevrolet, GMC (6.2) Exhaust System Kit71798811-18 GM 1500 TRUCK 6.2L FFX CB DOS;2011-2018 GM 1500 trucks with 6.2-liter engines. Fits 2 & 4-wheel drive, All Wheelbases.;flowmaster; flowfx; gm; chevy; Chevrolet; gmc; Silverado; sierra; 1500; truck; 6.2l; cat; back; exhaust; system; kit; exit; stainless; dual; side; duals; black; off; road;...
Introduction: Happy new year everyone! This is the final collab from 2020. It was a rough year, but the collabs were (mostly, looking at you...
Please note I only deliver to UK destinations Due to high postage costs to other countriesMoonlight cove lilliput lane cottage Good condition But doesn't have the label on the bottom 1991 409gm in weight 3.5" wide 4" tall No deeds or box Will be carefully wrapped for its postage Reduced to £18
Electronic Marine Distributor GM V8 | Sierra 18-5494-2Sierra Electronic Marine Distributor Mallory magnetic breakerless ignition for GM small and big block marine engines.GM V8 electronic distributorFits most GM V8 marine enginesNot for 348, 409, and tall deck big block enginesSAE J1171 certified for use in marine applicationsMagnetic type ignition moduleFor longer module life use 18-29716 .7 ohm coil and 18-5450 ballast resistorReplacement cap P/N 18-5376Replacement rotor P/N 18-5404-1Replacement ignition module P/N 18-5488Replaces Mallory YLM624AV and 9-26306Replaces Crusader RA107039MReplaces PCM RA107039M SIERRA has a 56-year history as a top global producer of marine industry aftermarket engine and drive parts. In 2022, Sierra broadened the brand's appeal to encompass a variety of items for the aftermarket boating industry in addition to items for use on land.In addition to the extensive maritime brands formerly known as Shields and Moeller, the SIERRA brand includes the whole SIERRA Marine product ranges. The Prime Line brand for ATV/UTV and outdoor power equipment markets, as well as additional aftermarket parts and accessories for land-based applications, will also fall under the new SIERRA Brand umbrella.The SIERRA name is synonymous with high-quality, time-tested aftermarket goods that are backed by the best customer service and support in the market throughout all land and maritime markets. To anticipate and address client needs, we are always developing new products and technology.Being in charge of your boat means having all the information at your fingertips. We have what you need to stay in control, whether you're determining wind direction, speed, or water depth.Without a well working engine, there is no adventure on the water. Stock up on all the parts you'll need to keep yours running smoothly and conserving fuel so you can relax and enjoy the water.We take giving the appropriate gear for the job seriously since we know how serious you are about maintaining your vessel to keep it in top condition. Browse our selection of products to easily complete any repairs or assembly.
Apollo GT Series 3 IN Cat-Back Exhaust System w/ Dual Rear Exit w/ Black Tips GM Trucks 09-18 V6-4.3L/V8-4.8/5.3L\nThis system produced gains of up to +14 HP and +17 lbs. x Ft. TQ., as measured on our in-house dyno. This cat-back exhaust system is constructed of 3\" mandrel-bent 409 stainless steel tubing for maximum strength and durability. This system features a high-flow 409 stainless steel muffler, producing a aggressive sound. Finishing off this exhaust system are dual 4-1/2\" diameter black 304 stainless steel clamp-on exhaust tips. The tips features an aFe POWER logo plate riveted on for a unique style. This system produces an aggressive sound unleashing all available horsepower and torque. Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability.
GM V8 Point Type Marine Distributor | Sierra 18-5313-1Sierra Mallory breaker point style distributor for GM small and big block marine engines.GM point type distributor with mounting gasketFor most GM V8 small and big block enginesNot for 348, 409, and tall deck big block enginesSAE J1171 certified for use in marine applicationsReplacement tune up kit P/N 18-5251Replacement tune up kit with cap P/N 18-5271Replacement cap P/N 18-5376Replacment rotor P/N 18-5404-1Replacement contact set P/N 18-5314Replacement condenser P/N 18-5338Replaces Mallory YL624AVReplaces Mercury 17177A1, 91823A3, 816148A1, 74905A3, 68521A4, 68521A3, & 13447A1Replaces OMC 985560
Our new FlowFX cat-back exhaust system is manufactured using durable 409 stainless steel throughout and features a 3.00 inch inlet pipe leading to a single inlet/dual outlet FlowFX "straight-through" muffler for great sound and maximum performance. The dual 2.50 inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50 inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance FlowFX sound. The system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home. Notes: Fits 2wd and 4wd models and 2019 Classic models. Does not fit Crew Cab 2WD with 2 pc driveshaft or 2019 New Body Style. Features: • Easy at Home Installation • Full Stainless Steel Construction • Large 4.5 inch Black Ceramic Coated Stainless Tips • Deep Powerful Tone Inside and Outside the Vehicle Specifications California Proposition 65 Chemical Name: Chromium (hexavalent compounds); Nickel (Metallic) California Proposition 65 Required: Yes Catalytic Converter Included: No Emission Code: 5 Exhaust Series: FlowFX Exit Position: DOS Heat Shield: No Mount Type: Uses Factory Hangers Muffler Body Length (in): 18 Muffler Color: Natural Muffler Finish: Brushed Muffler Inlet Diameter (in): 3 Muffler Inlet Location: Centered Muffler Material: 409S Stainless Steel Muffler Outlet Diameter (in): 2.5 Muffler Outlet Location: Dual Outlet Muffler Overall Length (in): 24 Muffler Part Number: Kit Only Muffler Quantity: 1 Muffler Series: FlowFX Muffler Shape: Oval Muffler Type: Absorption Product Type: Exhaust Systems / Kits Single Dual: Dual Sound Level: Moderate/Aggressive System Type: Cat-back Tip Cut: Angle Tip Diameter (in): 4.5 Tip Edge Style: Cut Tip Finish: Black Ceramic Tip Length (in): 11 Tip Logo: Embossed Tip Material: 304 Stainless Tip Quantity: 2 Tip Shape: Round Tip Style: Single Wall Tubing Diameter (in): 2.5 Tubing Material: 409S Stainless Steel
FlowFX Cat-Back Exhaust System; Single Out Side Exit; Incl. 3 in. Tubing/Straight Through Mufflers/4.5 in. Round Black Ceramic Coated Tips; 409 Stainless Steel;Introducing the new FlowFX Cat-back exhaust system for 2014-18 GM Silverado/Sierra 4.3L and 5.3L engines. This performance exhaust system fits both 2 and 4-Wheel drive models with 143.5...
Powerful and Clear Sound: Experience exceptional audio with 660 watts of maximum power and 220 watts RMS power. Wide Frequency Response: Covers a broad range from 40Hz to 6.3kHz for accurate sound reproduction. High Sensitivity: With a sensitivity of 95dB, every detail of your music is reproduced with clarity. Durable Construction: Built with high-quality materials including a steel basket and ferrite magnet for longevity. DS18 Pro Series 10" 660W Max 8-Ohm Mid Range Loud Speaker PRO-GM10 This Listing Includes: (1) 10" 660W 8-Ohm Mid range Loud Speaker Elevate your sound system with the DS18 10" 660W Mid-Range Speaker. With a maximum power of 660 watts and RMS power handling of 220 watts, this speaker delivers powerful and clear sound reproduction. Its wide frequency response from 40Hz to 6.3kHz ensures accurate reproduction of every note, providing an immersive listening experience. Featuring a sensitivity of 95dB, this speaker captures every detail of your music with clarity. Built with high-quality materials including a steel basket and ferrite magnet, the DS18 10" Mid-Range Speaker is designed for durability and longevity. Upgrade your sound system effortlessly with DS18's premium audio solutions. Features: Maximum power of 660 watts and RMS power handling of 220 watts Wide frequency response: 40Hz to 6.3kHz High sensitivity of 95dB for clear sound reproduction Durable construction with steel basket and ferrite magnet Technical Specifications: Nominal Diameter: 10" Nominal Impedance: 8 Ohms RMS Power Handling: 220 Watts Max Power Handling: 660 Watts Sensitivity: 95 dB Frequency Response: 40 Hz ~ 6.3 kHz Recommended Hi Pass Crossover: 90 Hz Voice Coil Diameter: 2" (50.8mm) Cone Material: Paper Surround Material: Cloth Basket Material: Steel Magnet Material: Ferrite Dimensions: Overall Diameter: 10.1" (256mm) Overall Depth: 4" (103mm) Front Mount Baffle Cutout: 9" (230mm) Mounting Depth: 3.7" (96mm) Motor Diameter: 4.72" (120mm)
Our new FlowFX cat-back exhaust system is manufactured using durable 409 stainless steel throughout and features a 3.00 inch inlet pipe leading to a single inlet/dual outlet FlowFX "straight-through" muffler for great sound and maximum performance. The dual 2.50 inch mandrel-bent tailpipes exit out the side at an angle behind the rear wheels directing exhaust away from your boat or travel trailer when towing. The system is finished off with a pair of large 4.50 inch diameter black ceramic coated 304S stainless steel tips, giving your truck a custom look that goes hand in hand with that deep performance FlowFX sound. The system uses all the existing factory hanger locations and includes an additional hanger to install the new left side tailpipe. Includes installation instructions and all necessary hardware for an easy installation that you can do at home. Notes: Fits 2wd and 4wd models and 2019 Classic models. Does not fit Crew Cab 2WD with 2 pc driveshaft or 2019 New Body Style. Features: • Easy at Home Installation • Full Stainless Steel Construction • Large 4.5 inch Black Ceramic Coated Stainless Tips • Deep Powerful Tone Inside and Outside the Vehicle Specifications California Proposition 65 Chemical Name: Chromium (hexavalent compounds); Nickel (Metallic) California Proposition 65 Required: Yes Catalytic Converter Included: No Emission Code: 5 Exhaust Series: FlowFX Exit Position: DOS Heat Shield: No Mount Type: Uses Factory Hangers Muffler Body Length (in): 18 Muffler Color: Natural Muffler Finish: Brushed Muffler Inlet Diameter (in): 3 Muffler Inlet Location: Centered Muffler Material: 409S Stainless Steel Muffler Outlet Diameter (in): 2.5 Muffler Outlet Location: Dual Outlet Muffler Overall Length (in): 24 Muffler Part Number: Kit Only Muffler Quantity: 1 Muffler Series: FlowFX Muffler Shape: Oval Muffler Type: Absorption Product Type: Exhaust Systems / Kits Single Dual: Dual Sound Level: Moderate/Aggressive System Type: Cat-back Tip Cut: Angle Tip Diameter (in): 4.5 Tip Edge Style: Cut Tip Finish: Black Ceramic Tip Length (in): 11 Tip Logo: Embossed Tip Material: 304 Stainless Tip Quantity: 2 Tip Shape: Round Tip Style: Single Wall Tubing Diameter (in): 2.5 Tubing Material: 409S Stainless Steel
From the modeler... Kit used: Master Grade 1/11 GM Sniper II Paints used: Mr primer surfacer 1000 Mr surfacer 1200 Mr color c129 Mr color c126 Mr color
Flowmaster Chevrolet, GMC (6.2) Exhaust System Kit71798811-18 GM 1500 TRUCK 6.2L FFX CB DOS;2011-2018 GM 1500 trucks with 6.2-liter engines. Fits 2 & 4-wheel drive, All Wheelbases.;flowmaster; flowfx; gm; chevy; Chevrolet; gmc; Silverado; sierra; 1500; truck; 6.2l; cat; back; exhaust; system; kit; exit; stainless; dual; side; duals; black; off; road;...
Powerful and Clear Sound: Experience exceptional audio with 660 watts of maximum power and 220 watts RMS power. Wide Frequency Response: Covers a broad range from 40Hz to 6.3kHz for accurate sound reproduction. High Sensitivity: With a sensitivity of 95dB, every detail of your music is reproduced with clarity. Durable Construction: Built with high-quality materials including a steel basket and ferrite magnet for longevity. DS18 Pro Series 10" 660W Max 8-Ohm Mid Range Loud Speaker PRO-GM10 This Listing Includes: (1) 10" 660W 8-Ohm Mid range Loud Speaker Elevate your sound system with the DS18 10" 660W Mid-Range Speaker. With a maximum power of 660 watts and RMS power handling of 220 watts, this speaker delivers powerful and clear sound reproduction. Its wide frequency response from 40Hz to 6.3kHz ensures accurate reproduction of every note, providing an immersive listening experience. Featuring a sensitivity of 95dB, this speaker captures every detail of your music with clarity. Built with high-quality materials including a steel basket and ferrite magnet, the DS18 10" Mid-Range Speaker is designed for durability and longevity. Upgrade your sound system effortlessly with DS18's premium audio solutions. Features: Maximum power of 660 watts and RMS power handling of 220 watts Wide frequency response: 40Hz to 6.3kHz High sensitivity of 95dB for clear sound reproduction Durable construction with steel basket and ferrite magnet Technical Specifications: Nominal Diameter: 10" Nominal Impedance: 8 Ohms RMS Power Handling: 220 Watts Max Power Handling: 660 Watts Sensitivity: 95 dB Frequency Response: 40 Hz ~ 6.3 kHz Recommended Hi Pass Crossover: 90 Hz Voice Coil Diameter: 2" (50.8mm) Cone Material: Paper Surround Material: Cloth Basket Material: Steel Magnet Material: Ferrite Dimensions: Overall Diameter: 10.1" (256mm) Overall Depth: 4" (103mm) Front Mount Baffle Cutout: 9" (230mm) Mounting Depth: 3.7" (96mm) Motor Diameter: 4.72" (120mm)
Image 12 of 15 from gallery of BanQ / Office dA. Plan
4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Polished Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter polished 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2018 Chevrolet Silverado 1500 High Country 2014-2018 Chevrolet Silverado 1500 LTZ 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLT
4" 409 Stainless Steel Construction: This cat-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability.High-Flow 409 Stainless Steel Muffler: This system features a high-flow 409 stainless steel muffler, producing a deep sound. 5" Diameter Polished Intercooled Exhaust Tip: Finishing off this exhaust system is a 5" diameter polished 409 stainless steel intercooled clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Interlock Flex Pipe: This cat-back exhaust system uses a heavy duty flex pipe with an internal interlock liner for added strength and durability.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.This item fits: Crew Cab/Short Bed ( 69.3" Box), 143.5" Wheelbase, Crew Cab/Long Bed (78.8" Box), 143.5" Wheelbase, Extended Cab/Long Bed (78.8" Box) 153" WheelbaseEmissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.This Part Fits: Year Make Model Submodel 2014-2018 Chevrolet Silverado 1500 High Country 2014-2018 Chevrolet Silverado 1500 LTZ 2014-2018 GMC Sierra 1500 Denali 2014-2018 GMC Sierra 1500 SLT
Powerful and Clear Sound: Experience exceptional audio with 660 watts of maximum power and 220 watts RMS power. Wide Frequency Response: Covers a broad range from 40Hz to 6.3kHz for accurate sound reproduction. High Sensitivity: With a sensitivity of 95dB, every detail of your music is reproduced with clarity. Durable Construction: Built with high-quality materials including a steel basket and ferrite magnet for longevity. DS18 Pro Series 10" 660W Max 8-Ohm Mid Range Loud Speaker PRO-GM10 This Listing Includes: (1) 10" 660W 8-Ohm Mid range Loud Speaker Elevate your sound system with the DS18 10" 660W Mid-Range Speaker. With a maximum power of 660 watts and RMS power handling of 220 watts, this speaker delivers powerful and clear sound reproduction. Its wide frequency response from 40Hz to 6.3kHz ensures accurate reproduction of every note, providing an immersive listening experience. Featuring a sensitivity of 95dB, this speaker captures every detail of your music with clarity. Built with high-quality materials including a steel basket and ferrite magnet, the DS18 10" Mid-Range Speaker is designed for durability and longevity. Upgrade your sound system effortlessly with DS18's premium audio solutions. Features: Maximum power of 660 watts and RMS power handling of 220 watts Wide frequency response: 40Hz to 6.3kHz High sensitivity of 95dB for clear sound reproduction Durable construction with steel basket and ferrite magnet Technical Specifications: Nominal Diameter: 10" Nominal Impedance: 8 Ohms RMS Power Handling: 220 Watts Max Power Handling: 660 Watts Sensitivity: 95 dB Frequency Response: 40 Hz ~ 6.3 kHz Recommended Hi Pass Crossover: 90 Hz Voice Coil Diameter: 2" (50.8mm) Cone Material: Paper Surround Material: Cloth Basket Material: Steel Magnet Material: Ferrite Dimensions: Overall Diameter: 10.1" (256mm) Overall Depth: 4" (103mm) Front Mount Baffle Cutout: 9" (230mm) Mounting Depth: 3.7" (96mm) Motor Diameter: 4.72" (120mm)