Have you ever noticed how the world of art keeps expanding all the time to accommodate new aspects as well as keeping faith with the old ones? If you have not, we request you to think on this now. That is both the beauty and mystery of art that keeps drawing people to enhance and enjoy it. Music is an art form that knows no boundaries and limits and when you combine the visual art of decorating an instrument that is used to make music, then it becomes doubly charming. The sight of a young man strumming on a guitar is a great sight and is good for the ears too. And when the guitar in question is creatively done up like an artwork, then the attraction doubles. One could almost be forgiven for likening this to different forms of dancing, an art form that is pleasing to the eyes and the ears.
NO GUITAR IS INCLUDED IN THE AUCTION! THIS AUCTION IS FOR THE SKULL PARTS ONLY!!! SEE MY OTHER AUCTIONS IF YOU ARE INTERESTED IN A SMALLER PACKAGE OF PARTS FOR A LES PAUL. ALL THE METAL SKULL PARTS YOU SEE CAN BE FOUND IN MY OTHER AUCTIONS SEPERATE. SO IF YOU ARE NOT INTERESTED IN THE FULL PACKAGE AND JUST WANT 1 OR 2 PARTS, YOU CAN BUY THEM INDIVIDUALLY IN MY LIST OF AUCTIONS. I ALSO CARRY A SKULL TRUSS ROD COVER FOR LES PAULS NOT IN THIS AUCTION. THOSE ARE SOLD SEPERATLY IN MY AUCTIONS DUE TO SOME PEOPLE HAVE A REGULAR GIBSON AND SOME HAVE A gibson EPIPHONE LES PAUL. I ALSO CARRY A BUNCH OF SKULL PARTS FOR OTHER BRAND GUITARS. these are not gibson epiphone guitar companies parts. these are custom made aftermarket parts, hand made to fit gibson epiphone.THESE WILL FIT BOTH, THE REGULAR GIBSON AND THE EPIPHONE MADE BY GIBSON LES PAUL.THIS AUCTION IS FOR THE METAL SKULL GUITAR PARTS ONLY. THE GUITAR IS NOT INCLUDED.ALL SKULL PARTS ARE CAST IN METAL AND ARE HAND SCULPTED, HAND CAST AND HAND FINISHED. HIGH QUALITY! GREAT DETAIL! SEE MY PICS FOR THE DETAIL OF THESE PARTS! WITH THIS AUCTIONS YOU GET THE FOLLOWING.1. 2 SKULL HUMBUCKER PICKUP RINGS. (rings come flat but, bend easy for fitting the curve of your les pauls body. comes with bending instruction sheet and 8 black mounting screws)2. SKULL PICKGUARD (does not come with mounting bracket. you would use your existing bracket to mount.)3. 4 SKULL KNOBS. (attaches using a set screw inside the knob. 1/4 hole size. if you have the smaller metric stems just wrap stems with masking tape for a snug fit and tighten set screw)4. SKULL TOGGLE SWITCH COVER. (comes with 4 screws but, if you don't want to drill your guitar, it can still be installed just using your toggle switch's nut to hold it inplace)5. JACK COVER. (comes flat and would need slight bending to fit curve of your guitar body) 6. SKULL STOP BAR TAIL PIECE (just remove your tail piece and discard and attach mine. super easy!)PLEASE SEE MY FEEDBACK TO SEE WHAT OTHERS THINK OF MY HANDMADE SKULL GUITAR PARTS.THANKS ALOT FOR LOOKING AND FEEL FREE TO ASK ANY QUESTIONS IF YOU HAVE ANY.Gibson, Epiphone, and les paul are Registered Trademarks. These parts are being sold as aftermarket parts. My parts are not endorsed by, or affiliated with Gibson® Epiphone® guitars in any way. The mention of the brand is only to inform the buyer which guitar these will fit.
Two pieces to make your Telecaster style guitar really stand out from the crowd and make it individual ! Flower Vines design hand engraved. I offer two versions, humbucker or single coil neck pickup, please select correct one when ordering. These have been hand crafted from 1.5mm black anodised aluminium, and hand engraved, real bespoke custom items, no two will be the same as the design is hand drawn 'every' time ! These are 8 hole scratchplates which are common on the vast majority of modern Fender® USA & Mexican Telecaster® guitars. They will fit Genuine Fender® USA Teles® that were built from the year 1959 right up to their 2017 models, and genuine Fender® Mexican Teles® built between 2002 up to the current year, without you having to re-cut the pickguard or re-drill new holes in your body, as you'd have to on other generic size Import parts. NOTE - WILL NOT FIT FENDER MODERN PLAYER TELECASTERS AS THEY ARE MADE IN CHINA AND HOLE SPACING IS DIFFERENT, PLEASE SEND A TRACING AND I WILL MAKE ONE FROM THAT FOR YOU These scratchplates have 2 holes next to the pickup cavity so you can adjust the height of the neck pickup without removing the scratchplate. Control plates have regular 3-way switch slot and potentiometer holes at 3/8 regular Fender size. WHAT ABOUT OTHER GUITAR MAKES ? If you have a Squier, Harley Benton, Glarry or a G&L , or any other type of Telecaster styled guitar I will be happy to make a design for you, but you would need maybe need to supply me with a template to ensure correct line up of pick ups and screw holes etc.. Or if you need a LEFT HANDED version, no problem. Please note these are made to order, so allow 1-2 weeks for production.
With a little thought into how you store and display your guitars, you can keep them in optimal shape, ready to receive your ideas when inspiration strikes.
As you can see, the Steampunk Guitars Culture is alive and well in the guitar world. It appears many guitar players also have a toe in the steampunk cult...
THIS AUCTION IS FOR THE SKULL GUITAR PARTS ONLY! NO GUITAR IS INCLUDED IN THIS AUCTION! PARTS ONLY! I HAVE MANY OTHER SKULL PARTS THAT WILL FIT A BC RICH AS WELL AS MANY OTHER BRAND GUITARS IN MY AUCTIONS. YOU CAN ALSO BUY ANY OF THESE ITEMS BY THEMSELVES INDIVIDUALLY IN MY AUCTIONS." READ AUCTION DISCRIPTION FULLY BEFORE BUYING!! " these are not bc rich items. they are after market custom made parts made to fit bc rich guitars. ALL PARTS ARE HAND SCULPTED, HAND CAST AND HAND FINISHED IN SOLID METAL! SEE MY FEEDBACK TO SEE WHAT MY CUSTOMERS THINK ABOUT MY HAND MADE PARTS.THIS AUCTION IS FOR MY FULL PACKAGE OF SOLID METAL SKULL PARTS FOR A BC RICH WARBEAST BEAST GUITAR. 7 PARTS TOTAL. 1. SKULL HUMBUCKER PICKUPS RINGS (2 RINGS) (FITS STANDARD AND EMG'S PICKUPS).2. SKULL TRUSS ROD COVER.3. 2 SKULL KNOBS.4. SKULL JACK COVER.5. SKULL TOGGLE SWITCH COVER (COMES WITH SCREWS IF YOU WANT TO DRILL BUT, NOT NEEDED TO INSTALL IF YOU DON'T WANT TO SCREW. YOUR TOGGLES NUT WILL HOLD IT IN PLACE JUST FINE)IF YOU HAVE A 6 TO ONE SIDE TUNERS, MY TRUSS COVER WILL NOT WORK. THE SKULL STICKS OUT AND WOULD HIT YOUR STRINGS. YOU NEED TO HAVE A SPLIT 3 TO A SIDE TUNERS LIKE IN THE PICTURE.IF YOU ARE INTERESTED IN MY PARTS BUT, ONLY WANT CERTAIN ONES, THEY ALL CAN BE BOUGHT SEPERATE IN MY AUCTIONS. THE FREE SHIPPING ONLY APPLIES TO THIS SKULL PARTS FULL PACKAGE. THANKS ALOT FOR LOOKING AND IF YOU HAVE ANY QUESTIONS AT ALL, I'M ALWAYS HERE TO HELP. BUY WITH CONFIDENCE! I ALWAYS TAKE 100% GOOD CARE OF MY CUSTOMERS AS YOU CAN SEE FROM MY FEEDBACK.
This carved walnut electronic guitar, designed and crafted by sculptor William Jeffrey Jones, features a mermaid motif.
This auction is for one set of 2 skull humbucker rings only! No other parts or guitar is included! The other parts you see can be found in my other auctions.Up for sale is a set of hand made solid metal skull humbucker rings. Hand sculpted, hand cast and hand finished. High quality! These rings will fit any guitar with 2 standard or 2 EMG humbucker pickups. Unless you guitar does not already have rings. Please note that because of the neck rings skull with wings part, some guitars pickguards would not fit. You would either have to trim your pickguard to make room or remove your pickguard. If you have a les paul, I also sell a skull pickguard designed to fit with my rings.The rings come flat, but they also come with directions on how to bend them for arched top guitars like les pauls. Super easy to do. The rings come with 8 black mounting screws. You would use your pickups stock adjustment screws for adjusting.If for any reason you are not 100% happy, I do accept returns for a refund. But, you will be happy! These rings are sweet! This is not a gibson or epiphone item. These are after marker items custom made to fit many guitars including Gibson and epiphones. Gibson and Epiphone are trade marked names and the names are only used to show a few of the guitars my rings will fit.
Only seven have ever existed. Andy Battaglia reports from Norway on an extremely rare performance.
custom angel guitars by esp company
Marc De Waey makes some guitars in the style of other instruments. Here's one that resembles violin construction. It has some interesting ideas. However,
Zager Guitars is a instrument manufacturer based out of Lincoln, Nebraska. Designed by master guitar builder Denny Zage...
Check your calendar and your watch, because it's that time once again folks! Time to put the day on pause for a few moments as you take some time for yourself to have a look through this big batch of pics. Your school work or "work work" isn't going anywhere so give yourself the break you so deserve and take a virtual field trip through the internet without ever having to leave your seat.So tune everything out, let your brain rest for a few moments and bring your stress levels back down to normal. How you ask? Why with the perfect collection of odd, interesting, and funny photos for your enjoyment! These awesome pics and funny randoms were hand selected with you in mind to help break up the mundaneness of another long day.Check out the previous batch of the Daily Dose of Randoms just incase you missed it!
Report Listing to Reverb
Solid, hardwood rack for all of your guitar and/or banjo cases. NOTE: other woods/colors are available either in our shop or shoot us a message! Your instruments are valuable, and important to you. They are safest when in their case, and should always be stored vertically. Our guitar/banjo case racks are made of solid Walnut wood (other woods are available in our shop) and will last for generations. There is NO external hardware and all seams and edges are rounded and smooth. This beautiful case rack will keep your cases safe and free from scratches. The rack is shipped in 7 pieces (to keep shipping costs low) and can be assembled without any tools. The pieces simply slide together. The inside width of the rack is 28" which will fit 4 standard size hard guitar cases. Overall, it is 30" wide, 35" tall, and 14" deep. However, we make custom racks all the time. Racks for Ukuleles, violins, and most other instruments can be made for a similar cost. We even make racks for multiple instrument types! Just shoot us a message if you need something special, and don't see it in our shop! When assembled the rack is sturdy enough for constant, daily use and can be broken down easily for travel. We sometimes have scratch-or-dent racks for sale in our shop, too!
