#GUNPLA #gundam #AMURORAY #νGUNDAM #3Dプリンター #逆襲のシャア

Scribing is my favorite customization technique. It lets you add a ton of detail to an otherwise boring kit in a very small amount of time. Adding a few basic shapes to a blank armor panel can make it more interesting to look at. But don't let the term "basic" fool you. If you think freehand drawing a perfect circle is difficult, scribing one onto plastic is next to impossible without the help of a proper tool. That is where templates come in. More after the jump! I acquired this scribing template set by Hasegawa a few months back and it quickly became my favorite tool. Scribing templates are very similar to those drawing templates/stencils used by architects and engineers for tracing small shapes, except a template meant for scribing is usually made of thin, flexible metal. This allows you to trace shapes onto the surface of your kit using a sharp pointed object, such as a scriber or compass needle without damaging the template itself. Allow me to demonstrate how it is used: You will need a few more tools for this activity - a compass needle or something similar, a hobby knife for straight edges, a few strips of masking tape, sandpaper, and of course, the part you want to detail. Choose the pattern you want to use and determine where you want to put it. In this example, I'll be adding some vertical capsule shapes. To keep everything straight, I align the edge of the template with the edge of the part, and use masking tape to help hold it in place... Now comes the tricky part - With my left hand, I hold the template firmly against the part, making sure it doesn't move, and then use the needle to trace along the inside of the template. I start with light strokes and gradually increase the pressure as I go around the shape several times. You don't need to scribe deep at this point. Just make sure you've traced the shapes onto the part. Some plastic dust building up around the shape is a good indication that the you've done enough. Once I'm confident I've traced the shapes well enough, I remove the template. Note how shallow the scribed shapes look at this point. Now it's time to deepen the panel lines. I take a compass needle and run it along the scribed shapes, using just enough pressure to dig a little bit deeper as the needle tip traces along the shape. I don't want to dig too deep because this will make the panel line look thicker. This is the step where I usually get a lot of unwanted scratches, but scratches are fixable and I'm willing to risk it to get nice solid panel lines. A hobby knife can be used in this step if the shape you are making has lots of straight edges. Once I'm happy with the depth of the lines, I do progressive sanding (using increasing grits of sandpaper) to smooth everything out and to eliminate the raised edges on the shapes created by the scribing tools. Minor scratches are also dealt with. ...And I'm done! The blank panel now has a bit more detail to draw the eye. These will look nice and sharp after a panel wash, and they can also be masked for some color separation. The best part - this was done in a little over 10 minutes. Imagine how much detail you can add to your kit in a day! Until the next tutorial...keep building plamo!

“WIP HG Gabthley legs details!! I always have the MOST safisfaction on a detail part when it's the legs. They just look soooo cool! Now onto painting! @joshuadarrah #gunpla #zetagundam #gbwc #ガンプラ #ガンプラビルダー大フォロー祭り”

對剛普拉進行刻線，有人說是「增加資訊量（搔頭）」，有人說「偽裝甲線」；前者太深奧，我不太懂真正的意涵為何，但後者倒是形容的不錯。對我來說，刻線就是「線」，不論是直線、弧線、怪怪線，這些都是用來裝飾、修飾零件上過大的留白處，進而豐富視覺的感受；就如同我們會在空盪盪的牆壁上掛幅...

“WIP HG Gabthley legs details!! I always have the MOST safisfaction on a detail part when it's the legs. They just look soooo cool! Now onto painting! @joshuadarrah #gunpla #zetagundam #gbwc #ガンプラ #ガンプラビルダー大フォロー祭り”

A wonderful idea to detail up your GunPla! It is really smart and resourceful to use those embossed characters on your GunPla runners. J...

Details, details, details! 😁👍#gundam #gbwc #gbwc2022 #plamo

안녕하세요? 루피입니다. 오랜만에 루리에 킷을 올리게 되었네요.어딘가에 올리려다 말고 묵혀둔지 1년쯤 된 HGUC 마라사이입니다. 발매된지는 오래되었지만 프로포션이나 기본모습이 매우 훌륭한 제품입니다. - 킷의 인상을 좌우하는 머리입니다.- 먼저 자전거 헬멧처럼 생긴 마라사이 특유의 두부 장갑부터 손을 봅니다.(그냥 통칭으로 헬멧이라 하겠습니다.) 많이들 하는 모노아이 윗부분 연장작업을 합니다. 유격훈련장에 빨간모자 조교들이 카리스마를 올리기 위해 잘 하는 ‘모자눌러쓰기’라고 보시면 되겠습니다. 눈과 헬멧 사이가 좁아져서 좀 더 날카로운 느낌을 주기 위해 자주 쓰는 방법입니다. 다만 마라사이는 가운데에 특유의 돌기가 있어 매의 부리와 같은 느낌을 주는데, 이 부분 때문에 프라판을 붙이기엔 까다로운 면이 없지 않습니다. 프라판과 퍼티를 이용해서 연장과 함께 돌기를 살리는 작업을 합니다. 중심이 틀어지지 않도록 비교해가면서 연장을 해주면 되겠...

■前回、カメラのバッテリー切れで途中となってしまいましたので、再度詳しい解説も含めてジムスナⅡ完結編とさせて頂きます。ＭＧジムスナⅡ改修製作の総まとめ・・・・…

I worked and had a great time modding these outer vents hey. Oh man! I wanted angles galore. @joshuadarrah #gunpla #ガンプラ #ガンプラビルダー大フォロー祭り

我從沒在 wormxtoy.com 分享過「寬線」的刻線技巧，主要因素是沒有方便、好用的工具；自幾個月前我有了MAD寬刀後，我便開始準備分享這一切。在科幻類的模型上（尤其是鋼普拉）刻「寬線」，最常用且最基本的應用大致上有三種（上如圖）。 寬線單獨呈現或與細線相互搭配，可...

1/144 GAT-X105AZ Strike Azzurro - Custom Build Modeled by shunneige Base Kit Used: RG 1/144 Aile Strike Gundam CLICK HERE TO VIEW FULL POST...

■高い難易度フリーダムは今まで何機か作ってきましたが、いつも悩む部分が翼の部分なのです。キットでのフリーダムの翼はとてもシンプルで、それが正解なのかもしれませ…

部分的で #これを見た人は加工前と加工後を貼れ

PG 1/60 Unicorn Gundam + Full Armor Part Set - Customized Build Modeled by 冥夜

■高い難易度フリーダムは今まで何機か作ってきましたが、いつも悩む部分が翼の部分なのです。キットでのフリーダムの翼はとてもシンプルで、それが正解なのかもしれませ…

對剛普拉進行刻線，有人說是「增加資訊量（搔頭）」，有人說「偽裝甲線」；前者太深奧，我不太懂真正的意涵為何，但後者倒是形容的不錯。對我來說，刻線就是「線」，不論是直線、弧線、怪怪線，這些都是用來裝飾、修飾零件上過大的留白處，進而豐富視覺的感受；就如同我們會在空盪盪的牆壁上掛幅...