Get Insulating Mat free delivery all over UAE. Tested and certified for use in power stations, oil and gas factories, construction, and hotels. Contact for quotes.
A comparative study of 6 types of electrical insulating mats with technical specifications (CPRI/ERDA tested, ISI marked & BIS approved) & industrial applications.
3/6/10Mm Super Light Silica Aerogel Insulation Hydrophobic Cutting Mat Material Description Descriptions : Aerogel is a synthetic porous ultralight material derived from a gel, in which the liquid component of the gel has been replaced with a gas. The result is a solid with extremely low density and lowthermal conductivity. Nicknames include frozen smoke, solid smoke, solid air, or blue smoke owing to its translucent nature and the way light scatters in the material. It feels like fragile expanded polystyrene to the touch. Aerogels can be made from a variety of chemical compounds. Aerogel was first created by Samuel Stephens Kistler in 1931, as a result of a bet with Charles Learned over who could replace the liquid in ''jellies'' with gas without causing shrinkage. Aerogels are produced by extracting the liquid component of a gel through supercritical drying. This allows the liquid to be slowly dried off without causing the solid mould in the gel to collapse fromcapillary action, as would happen with conventional evaporation. The first aerogels were produced from silica gels. Kistler's later work involved aerogels based on alumina, chromia and tin dioxide. Carbonaerogels were first developed in the late 1980s. Specifications : Material : Fiberglass + Nano Silica Aerogel Color : White Density : 180-220kg/m3 Applicable Temperature : -200℃ ~ +1000℃ Hydrophobicity : Absolute Hydrophobicity (Below 350℃) Thermal Conductivity : 0.012 - 0.018w/m·k (At 25℃) Low Temperature Bending : ≤99% Breaking Elongation : 65% Bending Strength : 45KP Compressive Strength : 32N Application Scope : Various high temperature pipes Thickness : 3mm / 6mm / 10mm Size : (L)X(W) 140x30cm / 55.12''x11.81''(appr.) Features : Brand New and high quality. * Excellent heat insulation effect. * Reducing the thickness of insulation layer. A small loss of heat insulation, high space utilization rate. * Hydrophobicity and fire resistance to effectively prevent water entering the pipe, internal equipment. * Convenient construction, lightweight and easy to cut and sew to adapt to different shapes of pipes and equipment. * Mainly used for industrial pipelines, storage tanks, industrial furnace, power plant, lifesaving cabin, ship bulkheads, household appliances, etc. Notice: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures. Package included : 1 x Aerogel Insulation Mat
3/6/10Mm Super Light Silica Aerogel Insulation Hydrophobic Cutting Mat Material Description Descriptions : Aerogel is a synthetic porous ultralight material derived from a gel, in which the liquid component of the gel has been replaced with a gas. The result is a solid with extremely low density and lowthermal conductivity. Nicknames include frozen smoke, solid smoke, solid air, or blue smoke owing to its translucent nature and the way light scatters in the material. It feels like fragile expanded polystyrene to the touch. Aerogels can be made from a variety of chemical compounds. Aerogel was first created by Samuel Stephens Kistler in 1931, as a result of a bet with Charles Learned over who could replace the liquid in ''jellies'' with gas without causing shrinkage. Aerogels are produced by extracting the liquid component of a gel through supercritical drying. This allows the liquid to be slowly dried off without causing the solid mould in the gel to collapse fromcapillary action, as would happen with conventional evaporation. The first aerogels were produced from silica gels. Kistler's later work involved aerogels based on alumina, chromia and tin dioxide. Carbonaerogels were first developed in the late 1980s. Specifications : Material : Fiberglass + Nano Silica Aerogel Color : White Density : 180-220kg/m3 Applicable Temperature : -200℃ ~ +1000℃ Hydrophobicity : Absolute Hydrophobicity (Below 350℃) Thermal Conductivity : 0.012 - 0.018w/m·k (At 25℃) Low Temperature Bending : ≤99% Breaking Elongation : 65% Bending Strength : 45KP Compressive Strength : 32N Application Scope : Various high temperature pipes Thickness : 3mm / 6mm / 10mm Size : (L)X(W) 140x30cm / 55.12''x11.81''(appr.) Features : Brand New and high quality. * Excellent heat insulation effect. * Reducing the thickness of insulation layer. A small loss of heat insulation, high space utilization rate. * Hydrophobicity and fire resistance to effectively prevent water entering the pipe, internal equipment. * Convenient construction, lightweight and easy to cut and sew to adapt to different shapes of pipes and equipment. * Mainly used for industrial pipelines, storage tanks, industrial furnace, power plant, lifesaving cabin, ship bulkheads, household appliances, etc. Notice: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures. Package included : 1 x Aerogel Insulation Mat
A comparative study of 6 types of electrical insulating mats with technical specifications (CPRI/ERDA tested, ISI marked & BIS approved) & industrial applications.
Specially designed high voltage X-Volt electrical insulating mats with standard 2mm -3mm thickness. Get ready stocks of electrical insulation mats upto 33kv from top manufacturer & supplier in India. Connect today.
A detailed guide on IEC61111 Electrical Insulation Mats with class 0-4, 36000V working voltage. Get complete technical info on insulation matting now.
Item specificsConditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging ... Read moreabout the conditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab MPNNABrandUS ENERGY PRODUCTSCustom BundleNoCountry/Region of ManufactureUnited StatesModelNATypeNAEANDoes not apply
Heat Shield Car Sound Deadener 100% Brand New, PE with aluminum material, Thickness: 1/4"236mil/6mm Thick, High quality tri-layer, twin density lightweight foam laminate High noise reduction & thermal insulation properties Non-flammable, flame retardant The fire proofing grade with the mat is B1 and its distortion temperature is 200℃.High temperature resistance Easy to cut & fit, strong adhesive backing Audio Noise Insulation and dampening material Size:About 108"x39"x1/4" (236mil/6mm ) Raw Material:High Quality foam rubber with Aluminum sheet 1100(AA):0.1mm thickness pure aluminum / Smooth Function:Soundproof Stick:Best Self-adhesive Type:Car Deadening Material: Insulating alumina fiber &Sound insulation cotton Applications: Exterior bulkhead, firewall, hood, engine compartment, engine bays. boot, wheel arch, body panels, load floor, under seat, floor, interior bulkhead. Also ideal for under floor applications as it has great load resistance properties.
Description: Sound Proofing Foam Insulation Mat,Acting as a thermal insulation in dissipating heat and keeping your car cooler in summer and warmer in winter. Specification: Material: Rubber&Plastic Color: Black Size (L*W): 1x1m Thickness: 3mm / 6mm / 8mm / 10mm Features: - Reducing vibrations and rattles. - Blocking unwanted ambient wind, road noise and engine noise. - Acting as a thermal insulation in dissipating heat and keeping your car cooler in summer and warmer in winter. - Heavier and higher quality composition than competitors. Package Included: 1 x Sound proofing cell foam ,
Exquisite Hollow Pattern: The elegant hollow pattern not only adds a touch of style to your kitchen but also enhances the heat insulation properties of the pot mat. Concave-Convex Anti-Slip Design: The unique concave-convex surface prevents sliding, providing effective anti-slip protection for added safety in the kitchen. Dual-Sided Anti-Scalding Material: Made with high-quality silicone materials, this pot mat offers excellent heat insulation on both sides, protecting your table surfaces from scalding. Soft & Smooth Texture: Our pot mat features a comfortable, smooth texture that feels great to touch, ensuring a pleasant experience while handling hot pots and pans. Space-Saving Hanging Storage: Designed with hanging holes, this pot mat can be easily hung for storage, saving valuable counter space in your kitchen. Description: Introducing our premium pot mat - the perfect blend of style, functionality, and durability for your kitchen! We have crafted this pot mat to cater to all your cooking needs while adding a touch of elegance to your home. Our pot mat features a soft, smooth texture that is comfortable to touch and gentle on your hands. The unique concave-convex design ensures that it stays in place and does not slide around, providing effective anti-slip protection for your countertops and tables. Made from high-quality, selected silicone materials, this pot mat offers excellent anti-scalding properties on both sides. It effectively insulates heat, protecting your surfaces from hot pots, pans, and dishes. No more worrying about damaging your countertops or tables with hot cookware! Designed with convenience in mind, our pot mat can be easily hung for storage when not in use. This space-saving feature allows you to keep your kitchen organized and clutter-free. The exquisite hollow pattern adds a touch of sophistication to any kitchen decor, making it an ideal gift for friends and family who love cooking. Upgrade your kitchen experience with our premium pot mat - the ultimate combination of style, practicality, and protection. Order yours today and experience the difference. Item Name: Pot Mat Material: Silicone Features: Hollow, High Temperature Resistant, Non-slip Size Details: Diameter: 17cm/6.69" (Approx.) Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Package Includes: 1 x Pot Mat Color: Pink.
Kaiflex adhesive 494 is a great choice for applications like joining kaiflex insulation sheets, thermoset insulation sheets, flexible insulation matting, rubberised asphalt and more. It is specifically designed to ensure a reliable water vapour-tight seal and is ideal for installation in areas of high humidity.
1/2M Sound-Absorbing Mat Cotton Made Proof Deadener Thermal Heat Insulation Feature:1. Brand New and high quality.2. Reduces unwanted sound and most vibrations.3. Effectively blocks 97% of radiant heat transfer.4. Keeps your interior cooler in the summer and warmer in the winter.5. Can make the heat of the engine evenly distributed to avoid overheating the lid.6. Flexible, crush resistant, non-toxic & fragrance free, creates a mold and mildew resistant vapor barrier.Specification:Color SilverMaterial Aluminum Foil + RubberWaterproof & Fire Resistant YesRecommended Install Temperature -10°C ~ +60°CResistance Temperature Range -40°C ~ +149°CThickness 10mm / 0.39'' (appr.)Size (L)X(W) S 0.4x1m/15.7x39.4in, L 0.5x2m/19.7x78.7inInstallation:1. Clean the dust and oil which cover the place you want to.2. Trim engine cover size well before the coherence.3. Remove the isolation paper and stick the heatinssulation pad in the angine covers.4. Finally press it evently, especially pay attantion to nearby concave-convex position.Notice:Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.Please understand that colors may exist chromatic aberration as the different placement of pictures.Package Included:1 X Sound-absorbing Cotton
Description Corrugated Switchboard Matting is made from non-conductive PVC and nitrile rubber. These mats are designed to protect workers from electric shock in areas with high voltage equipment such as electrical panels and circuit breakers. Corrugated Switchboard Matting is a non-conductive 1/4" Nitrite rubber/PVC matting that was engineered to protect workers against electrical shock when working around high voltage apparatus within product specifications. This matting is Type II, Class 2 with a recommended maximum voltage use of 17,000 volts AC. This product meets optimal ASTM requirements of Ozone, Flame and Oil Resistance. Specifications Material Nitrile Rubber and PVC Face Style Ribbed Application Commercial Areas Custom Sizes Available Total Height 6mm (1/4") Roll Length 22.8m (75') Linear Feet 2',3',4' Type Type II, Class 2 Use Voltage Recommended Max 17,000 volts AC Custom Sizes WIDTH WT (lbs) PRICE 2' 3.0 lbs/sq.ft. $24.60/LNFT 3' 5.0 lbs/sq.ft. $31.50/LNFT 4' 7.0 lbs/sq.ft. $56.40/LNFT Corrugated Switchboard Mating is available in custom cuts
3/6/10Mm Super Light Silica Aerogel Insulation Hydrophobic Cutting Mat Material Description Descriptions : Aerogel is a synthetic porous ultralight material derived from a gel, in which the liquid component of the gel has been replaced with a gas. The result is a solid with extremely low density and lowthermal conductivity. Nicknames include frozen smoke, solid smoke, solid air, or blue smoke owing to its translucent nature and the way light scatters in the material. It feels like fragile expanded polystyrene to the touch. Aerogels can be made from a variety of chemical compounds. Aerogel was first created by Samuel Stephens Kistler in 1931, as a result of a bet with Charles Learned over who could replace the liquid in ''jellies'' with gas without causing shrinkage. Aerogels are produced by extracting the liquid component of a gel through supercritical drying. This allows the liquid to be slowly dried off without causing the solid mould in the gel to collapse fromcapillary action, as would happen with conventional evaporation. The first aerogels were produced from silica gels. Kistler's later work involved aerogels based on alumina, chromia and tin dioxide. Carbonaerogels were first developed in the late 1980s. Specifications : Material : Fiberglass + Nano Silica Aerogel Color : White Density : 180-220kg/m3 Applicable Temperature : -200℃ ~ +1000℃ Hydrophobicity : Absolute Hydrophobicity (Below 350℃) Thermal Conductivity : 0.012 - 0.018w/m·k (At 25℃) Low Temperature Bending : ≤99% Breaking Elongation : 65% Bending Strength : 45KP Compressive Strength : 32N Application Scope : Various high temperature pipes Thickness : 3mm / 6mm / 10mm Size : (L)X(W) 140x30cm / 55.12''x11.81''(appr.) Features : Brand New and high quality. * Excellent heat insulation effect. * Reducing the thickness of insulation layer. A small loss of heat insulation, high space utilization rate. * Hydrophobicity and fire resistance to effectively prevent water entering the pipe, internal equipment. * Convenient construction, lightweight and easy to cut and sew to adapt to different shapes of pipes and equipment. * Mainly used for industrial pipelines, storage tanks, industrial furnace, power plant, lifesaving cabin, ship bulkheads, household appliances, etc. Notice: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures. Package included : 1 x Aerogel Insulation Mat
Brand New Insulation Rubber Foam Mat Made by Imported High Quality Foam Self adhesive Insulation Foam Sound and Heat Insulation Oil and Petrol resistant. Waterproof and Moisture-proof Keeps Heat in and Cold out during winter. Keeps Cold in and Heat out during summer. Ideal for use in cars, factories, house, recording s
1/2M Sound-Absorbing Mat Cotton Made Proof Deadener Thermal Heat Insulation Feature:1. Brand New and high quality.2. Reduces unwanted sound and most vibrations.3. Effectively blocks 97% of radiant heat transfer.4. Keeps your interior cooler in the summer and warmer in the winter.5. Can make the heat of the engine evenly distributed to avoid overheating the lid.6. Flexible, crush resistant, non-toxic & fragrance free, creates a mold and mildew resistant vapor barrier.Specification:Color SilverMaterial Aluminum Foil + RubberWaterproof & Fire Resistant YesRecommended Install Temperature -10°C ~ +60°CResistance Temperature Range -40°C ~ +149°CThickness 10mm / 0.39'' (appr.)Size (L)X(W) S 0.4x1m/15.7x39.4in, L 0.5x2m/19.7x78.7inInstallation:1. Clean the dust and oil which cover the place you want to.2. Trim engine cover size well before the coherence.3. Remove the isolation paper and stick the heatinssulation pad in the angine covers.4. Finally press it evently, especially pay attantion to nearby concave-convex position.Notice:Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.Please understand that colors may exist chromatic aberration as the different placement of pictures.Package Included:1 X Sound-absorbing Cotton
Description Non-conductive matting is formulated to provide insulation for the worker. The non-conductive mat prevents the worker from being grounded, thereby preventing electrical shock. Each square foot of matting is tested in conformance with ANSI/ANSTM D-178 specifications. Specifications Insulative PVC matting is formulated to provide insulation to the worker from being grounded thus preventing electrical shock. Each square foot of this matting is tested in conformance with ANSI/ASTM D-178 specifications and meets or exceeds the following: Type 2 Compound: Polyvinyl Chloride Class 2 Di-electric Strength: 30,000 volts Proof test of 20,000 volts Recommend maximum useage of 17,000 volts Corrugated linear saw-tooth pattern. Overall thickness is 1/4".
Soft rock wool mat that has been quilted on one side of a galvanized wire mesh. It is used as insulation for the adjacent wall when building fireplaces and tiled stoves. It can also be wrapped around hot pipes or placed on hot surfaces as insulation. When building an oven, it is laid from the outside as an insulating mat on the fireclay dome. Only then does the plaster come. This ensures that the heat remains in the oven. It is used wherever non-combustible, flexible (flexible) insulation is required. This can be with ovens or inserts as well as with hot machines or their components. It can be individually tailored and can therefore be used flexibly in many projects. Dimensions: Mat length: 6 m Width of the mat: 0.5m Roll area: 3 m2 Mat thickness: 3 cm Diameter of the roll: approx. 0.5m Technical details: Application limit temperature: 700°C Non-flammable High temperature resistance Easy to edit Rot proof Resistant to ageing Low thermal conductivity Soundproofing Water repellent
Listing is for one (1) 9” x 9” hand quilted scrappy chicken insulated tea pot & mug mat. Made with fabric and scraps from family projects over the years and piecing by mycraftycorner. Hand-quilted cotton lined with Insul-Bright for your tea pot, mug, or soup bowl to rest upon. Both sides are insulated. Please note that Insul-Bright Insulated Batting is Heat Resistant NOT Heat Proof. Do not use these quilted mug mats as potholders or trivets for hot pans. !!DO NOT put it in the microwave as they contain metallic fabric!! Mug/teapot not included. **SHIPPING INCLUDED IN LIST PRICE**
3/6/10Mm Super Light Silica Aerogel Insulation Hydrophobic Cutting Mat Material Description Descriptions : Aerogel is a synthetic porous ultralight material derived from a gel, in which the liquid component of the gel has been replaced with a gas. The result is a solid with extremely low density and lowthermal conductivity. Nicknames include frozen smoke, solid smoke, solid air, or blue smoke owing to its translucent nature and the way light scatters in the material. It feels like fragile expanded polystyrene to the touch. Aerogels can be made from a variety of chemical compounds. Aerogel was first created by Samuel Stephens Kistler in 1931, as a result of a bet with Charles Learned over who could replace the liquid in ''jellies'' with gas without causing shrinkage. Aerogels are produced by extracting the liquid component of a gel through supercritical drying. This allows the liquid to be slowly dried off without causing the solid mould in the gel to collapse fromcapillary action, as would happen with conventional evaporation. The first aerogels were produced from silica gels. Kistler's later work involved aerogels based on alumina, chromia and tin dioxide. Carbonaerogels were first developed in the late 1980s. Specifications : Material : Fiberglass + Nano Silica Aerogel Color : White Density : 180-220kg/m3 Applicable Temperature : -200℃ ~ +1000℃ Hydrophobicity : Absolute Hydrophobicity (Below 350℃) Thermal Conductivity : 0.012 - 0.018w/m·k (At 25℃) Low Temperature Bending : ≤99% Breaking Elongation : 65% Bending Strength : 45KP Compressive Strength : 32N Application Scope : Various high temperature pipes Thickness : 3mm / 6mm / 10mm Size : (L)X(W) 140x30cm / 55.12''x11.81''(appr.) Features : Brand New and high quality. * Excellent heat insulation effect. * Reducing the thickness of insulation layer. A small loss of heat insulation, high space utilization rate. * Hydrophobicity and fire resistance to effectively prevent water entering the pipe, internal equipment. * Convenient construction, lightweight and easy to cut and sew to adapt to different shapes of pipes and equipment. * Mainly used for industrial pipelines, storage tanks, industrial furnace, power plant, lifesaving cabin, ship bulkheads, household appliances, etc. Notice: Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures. Package included : 1 x Aerogel Insulation Mat
Item specificsConditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging ... Read moreabout the conditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab BrandUnbranded
Description Switchboard Dielectric Anti-fatigue Matting is designed to protect and insulate workers in high voltage areas and used to reduce shock around high-voltage equipment. It comes in black color and is ozone, flame and oil resistant. Our Switchboard Dielectric Matting with its insulating Nitrile Rubber/PVC matting has been specifically engineered to protect workers against electrical shock when working around high voltage apparatus within product specifications. Keep your workers safe and your workspace accident free. Specifications Material Vinyl Face Style Fine Rib Application Industrial - Insulative Sizes Available Roll Sizes - 2', 3' & 4 ft - Roll Length: 75' Custom Sizes Available Class II Class III Di-electric Test Voltage 30,000 VAC 60,000 VAC Proof Tested Over Entire Surface a 20,000 VAC 30,000 VAC Recommended Maximum Use Voltage 17,000 VAC 26,500 VAC Custom Sizes Custom Cut Sizes are available in 2 ft., 3 ft., 4 ft. widths Switchboard 2 ft Class II Black 1/4" $34.99/LNFT Switchboard 3 ft Class II Black 1/4" $42.99/LNFT Switchboard 4 ft Class II Black 1/4" $71.99/LNFT Switchboard 3 ft Class III Black 3/8" $94.99/LNFT
Why we chose cork exterior insulation for our net-zero-energy house
Expert advice for a warm, dry and inviting space
Boom Mat Undercarpet™ (UC™) is a second layer sound deadening and insulation mat that will help you maintain a quality ride experience by preventing unwanted noise from being transferred into the vehicle’s interior. In addition to its sound deadening properties, this two layer acoustic material provides superior insulation keeping vehicles cool in the heat of summer, and warmer in cold temperature climates. UC is made up of a top layer of flexible, one pound per square foot mass loaded barrier material, and a bottom layer of high quality industrial acoustical marine grade foam. These combined materials offer the most ideal way to maintain a “new car” driving experience by eliminating squeaks, rattles, vibration and unwanted engine noise and heat. UC can be added under carpet, on fire walls, or anywhere in the interior of a vehicle where additional sound deadening or insulation is needed. For the ultimate experience in a quiet ride and interior comfort, Boom Mat recommends using UC over Boom Mat vibration dampening material. UC can be mechanically fastened or tacked in place with Boom Mat Hi-Temp Spray Adhesive (# 356-10490) including vertical and overhead surfaces. UC is 3/8” thick and available in two sizes: 24” X 54” (9 sq. ft.)under part number (356-50100) and, 48” X 54” (18 sq. ft.) 5.6 db(A) reduction... a 25% noise reduction over leading competitors product Perfect to use over Boom Mat Insulate your interior from heat and cold Provides additional sound deadening 3/8” thick Covers 18 square feet Note: For the quietest ride possible, DEi recommends using Under Carpet as a second layer over Boom Mat Damping Material . Boom Mat Reference Guide (PDF) Learn more about identifying and solving vehicle noise issues by reading Boom Mat's tech article. Science of Noise. Learn more about the advantages of Boom Mat insulation as well as proper installation by reading Super Chevy Magazine's tech article. Boom Mat Installation - Quiet Cabin.
The Ultra 1R sleeping mat is perfect for human-powered adventures such as trekking, long-distance hiking, bikepacking and alpinism, in warmer temperatures. When every ounce counts, EXPED Ultra series sleeping mats ensure super-compact and ultralight sleep comfort anywhere. AIRMAT TECHNOLOGY - air-insulated for use in warmer temperatures. Ultra is not only light, but supportive too: the 7 cm thick air cushion features EXPED cradle comfort design: air chambers run head to toe, fully supporting the body for an unrivaled night's sleep and giving maximum durability. The lighweight and compact Ultra sleeping mat features recycled 20 D ripstop face fabric. EXPED's Schnozzel Pumpbag is included: rapid, moisture-free mat inflation: lung power not required! Delivery contents Sleeping Mat Packsack Schnozzel Pumpbag UL Repair Kit Season - Summer Person Capacity - 1 PeopleTechnology - Airmat TechnologyPumpsystem - Schnozzel Pumpbag R-Value: 1.3 Temperature: 50 °F Style Size Dimensions (Length, Weight, Width) Weight Packed Rectangular M 72 in x 13.9 oz x 20.5 13.9 oz 11 x 3.9 in Rectangular MW 72 in x 13.9 oz x 25.6 in 15.9 oz 12.6 x 4.3 in Rectangular LW 77.6 in x 13.9 oz x 25.6 in 17.3 oz 12.6 x 4.3 in Materials- recycled 20 D ripstop polyesterbluesign® approved fabricTPU film laminateDWR free Insulation-Air
Item specificsConditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging ... Read moreabout the conditionNew: A brand-new, unused, unopened and undamaged item in original retail packaging (where packaging is applicable). If the item comes direct from a manufacturer, it may be delivered in non-retail packaging, such as a plain or unprinted box or plastic bag. See the seller's listing for full details. See all condition definitionsopens in a new window or tab BrandLifelookMaterialAluminium, EPETypeInsulation PadSuitable ForAttic/Loft, Basement, Ceiling, Cold Room, Floor, Garage, Interior Wall, RoofFeaturesHeat Retardant, Moisture Retardant, Water ResistantMPNDoes Not ApplyNumber in Pack1ColourSilverItem Length5/10MItem Width30cm/50cm
Specifications Listing Date: 12/29/2023, Photos
Thermal insulation boards recommended for use with underfloor heating mats for improved efficiency.• 3m² coverage• 600mm x 1000mm x 10mm• Easy to cut and shape• Fixings and joint tape included• Klima technical helpline: 01887 822020Technical advice available:Visit: www.klima.co.ukCall: 01887 822020Email:...
Item specificsCondition
We test out the Therm-a-Rest MondoKing 3D SIM on a cold winter camp.