~ Ben Cribb (South African, current), circa 2014
The new Honda Marine engine 100 hp
LHT Performance in Pinellas Park, Florida has made a name for themselves by being the first to swap a Honda K-series engine into a Honda Insight and then a Honda CR-Z. We wrote about their first K20 powered Honda Insight back in 2009. Back then it was a stock K20 making 217 horsepower to the...
How Did Mercedes Do THIS To Their Engine?
There isn't just one path to a great engine. Different companies have different approaches to evoking emotion and performance from their heavily engineered powerplants. These are the 10 engines that captured the hearts and minds of car nuts everywhere.
Honda Tradition on Instagram: "One of the best Honda engines of all time? #hondacivic #hondacivictyper #civictyper #typer #civicsi #civic @civicsination @hondaracing_hpd @hondaracingcorporation @hondaracingbtcc @honda @bridgewater_acura @mlasko #hondaracing #honda #vintagehonda #hondalifestyle #hondalife #hondanation #hondalove #thepowerofdreams #nsx #acuransx #accord #hondaaccord #prelude #hondaprelude #engine #vtec #hondapower #kseries #turbo #Hondas2000 #bseries #kseries #fk8"
PARA DEJAR DONACIONES AQUÍ TE DEJO EL link👇👇👇👇👇👇https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=Y9U6Z5Y3MLERW&source=urlHola que t...
Specs: 2.5 block, 2.7 crank, 2.5 rods, custom 85mm Wiseco pistons, 885 2.5i head, stock cam (for now), Supersprint headers and exhaust, Bosch Motronic 1.3, custom chip, custom wiring from Motronic to the E21 fuse box. June, 2014: This BMW M20 engine was offered to me and the deal was too good to pass up. Supposedly it was taken from a parts car with 88k miles. It's from a 1988 325is. I know it's an 88 because it has the later style coolant system with the metal coolant pipe across the front. And it's an is because it has a oil filter housing set up for an oil cooler. I got lucky! Or did I? As I dismantle it I'm finding someone has been through this engine quite a lot. Nearly every bolt I touch is loose already. The timing cover is held on with one bolt, there are hoses missing, and the exhaust manifolds are already removed. And the kicker - the cylinder head is new/fresh. There's not a smudge anywhere inside and half the rocker arms are new! But I can't be so lucky - the timing marks between the cam sprocket and the crank pulley are off. It's off by 1.5 teeth on the cam mark. Since the M20 is an interference engine this can be BIG trouble. I'm hopeful that someone just reassembled the engine hastily and left it off a tiny bit. Update: after removing the cylinder head and inspecting it and the pistons, I think I have the whole story on what happened. As is too common on the E30 325, the timing belt probably broke, which sent the valves into the pistons. There are grooves in the exhaust valve reliefs on the pistons that shouldn't be there (the intake side looks good). So the head was pulled and rebuilt but was not milled. Then the pistons were cleaned up but not removed from the block. And the motor was reassembled with all new gaskets and driven for a little while. Then the car was sold. The last owner of the engine started taking it apart but took a different direction. That's why so many parts are removed or loose. I got very very lucky with this deal! Update, August, 2015: first drive with the new engine. A few small issues but running great! Update June, 2019: I have about 3,000 miles on the rebuild so far and it's been a joy to drive. There have been some setbacks from things that should have been done with everything off the car. But that's Murphy's Law for you. You can find the series of minor setbacks at the bottom of the last page. To see more about M20 and E21 life, check out my blog at www.e21323iblog.com. All images publicly shown are mine and I reserve all copyright.
All you need in life, trust me on that one
